Unable to open .eps file "unknown format and cannot be opened" ?

A client sent me an .eps file (logo). I tried opening it in Illustrator AND photoshop (just to see if it was saved in one vs the other program) - however to no avail.
Illustrator gives me a message "unknown format and cannot be opened"
Photoshop gives me a message "photoshop was unable to parse the postscript".
I'm using Adobe CS4, and I've never seen this message before—would love to know what this means and how to resolve?
File attached if anyone is able to open / fix it?
Thanks kindly,
Chemol

Thanks for the advice Scott - does compression improve the .eps?  Is it
silly for me to ask them to compress it since the file is only 766 KB
(that's how big the attachment is in my email - though I am unable to open
it)?
My friend is able to open it on his end - however the 3rd person (client) is
the one who sent it, and I have already requested a different version - no
response from them yet.  Unfortunately what the company "has" is what he
will likely give to me again (ie: same file / unable to open).  So ... I am
curious about how I can resolve this issue on my end - if possible?
Do you know what the AI and Photoshop error messages mean? Could the issue
be a mac vs PC concern? Or is it a corrupt file? Could it be a software
version issue (old vs new) ... or Quark incompatibility?
.... just guessing at this point....Any insight as to what different
scenarios may apply in this situation would be greatly appreciated ..thank
you.

Similar Messages

  • "E:\filename.ai" is in an unknown format and cannot be opened"

    My computer crashed. I just re-installed Adobe Illustrator 10.03. Now some of my ".ai" files show funny looking icons and won't open and instead a pop-up that says "E:\filename.ai" is an unknown format and cannot be opened". Some of my documents are just fine. But there are several Illustrator docs in various spots on my hard drive that are giving me this error.
    Any suggetions on how to get these files to open up?

    OK. Now we're getting somewhere.
    Without knowing more about the precise nature and cause of the "crash," we can only make guesses, and here's mine:
    Basically, Katie, you're screwed.
    My guess is that either the "crash" and/or your boss's subsequent handling of the D: drive (which might have been entirely proper) has caused data corruption on that drive.
    If you have no backup for the files on the drive, and if those files are of critical importance, I would disconnect the drive immediately and get it to a data recovery specialist. The longer you have it connected, the more you reduce the chance of recovering data.
    If the data are somewhat less than critical, you can try some basic recovery steps yourself. Start by making an image backup of the drive (to an external drive or removable media), then run chkdsk on it with the /r option. Rename any recovered files (with the .ai extension), and try opening them.
    Finally, you might send the .ai files that won't open to a specialist who knows the Illustrator file format. He/she might be able to make some partial fixes that will, at least, enable you to open the files.
    If you want, upload a few of the files to a server and post the link here. Some of the experts here might have a crack at it. (Put the files in a .zip archive first to protect them against further corruption during transfer.)

  • CS6 on Mac says .eps file is an unknown format and cannot be opened

    Trying to open a logo sent by a client an PS, AI, and ID have all given me an error saying that .eps is an invalid format. It's the only logo file available from the client, so my options are limited. First time I've had an issue with this ever, so not entirely sure what troubleshooting steps to go through. I've tried opening it in CS5 as well and I've tried changing the file extension to make it recognizable.

    Create a new file in Illustrator and then place the EPS in it (embedded). Maybe works.

  • I get error message " The file "Print.ai"is in an unknown format and cannot be opened"

    I receive that message when I try to open a new document. My others such as Photoshop and In Design are fine as far as I can tell.
    I'm using CS4 on Windows 7.
    Thanks in advance.

    Hi,
    You can try this:
    Place the .ai file into InDesign then exported it as an .eps file and then open it on Illustrator.
    Help document:
    http://en.allexperts.com/q/Adobe-Illustrator-1027/open-ai-file.htm

  • I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    Leslie Tanaka
    Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
    Let us go back over that Adobe document regarding troubleshooting damaged projects.
    3. Delete the Application Preferences
    Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
    7. Test to see if individual media files are causing the problem.
    That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
    I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
    I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
    Please review and consider.
    Thank you.
    ATR

  • Error The File "Print.ai" is in an unkown format and cannot be opened adobe Ilustrator 5.5

    I am getting an error The File "Print.ai" is in an unkown format and cannot be opened adobe Ilustrator 5.5 on Mac OX 10.10.2 but was also the same in Mac Mavericks. any thoughts?

    d,
    In addition to what Larry said, there is a number of levels you can try for general issues, described in the following list. 1) and 2) are the easy ones, 3) is the basic preference file (irreversible procedure), 4) is the whole preferences folder (reversible and more thorough, needed for some issues), 6) is the full ultimate solution, 5) can be skipped in this case.
    The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save current artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to at least 5 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
    https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Muse file is damaged and cannot be opened...Urgent support needd...loss of 40 hrs work

    I had worked on Muse file for over 40 hrs...Now I cannot open the file.
    It says the file is damaged and cannot be openned.
    Urgent support needed!!!!!!!!!!!!!!!!!!

    Jennifer, thank you for sending the two files. They've created more questions than answers.
    Neither file shows any signs of the type of damage that occurs when a drive is removed without being ejected. I feel quite confident that's not the cause in this case.
    Unfortunately the nature of the damage is such that to understand it I'm going to have to spend a significant amount of time developing some custom foreinsics tools. At least a few days of focused development. Unfortunately at the moment I have a few high priority deadlines looming along with an approaching vacation, so it's going to be at least a couple weeks before I'm going to make any progress on that.
    Without the results of those foreinsics but from what I've seen in the file the most likely cause is one of two things:
    1) Faulty hardware; or
    2) A bug in Muse.
    Neither of those is likely, but those are the two most likely causes I can theorize.
    Faulty Hardware
    From my experience on InDesign and now Muse I've come to realize hard drives fail far more frequently than most people realize. The fact that .muse (and InDesign) files are large means they cover more area on your hard drive and thus are more likely to be the first to encounter issues caused by a failing drive. The Muse file format is a database (as is InDesign's) that contains many many cross linked objects. If you save a large text file and one byte is scrambled the result is a misspelling in your text file and the word processor opens and displays the file fine. When one byte in a large image is scrambled odds are a single pixel will appear as the wrong color or transparency in your image editor. When a single byte in a database file is scrambled, it can break the interrelationship between objects and result in an unintelligible file to the application attempting to read it.
    I recommend you run Disk Utility and any other hard drive verification software you might have to help rule out failing hardware.
    A Bug In Muse
    This is the one I'll lose sleep over until I find time to do the forensics, assuming the forensics turn up something fairly conclusive. If the cause is a bug in Muse, it's going to have to be something very obscure that for whatever reason is radically more likely to occur on your computer or with your specific usage pattern of Muse, since it's exceptionally rare for someone to reach this error and not have a file with obvious signs of hardware failure, drive removal without ejection, folder sync software issues or multiple users simultaneously editing a file on a server.

  • Cannot "print" a window as pdf then read it in Adobe Reader; Adobe says the file is damaged and cannot be opened.

    Running Firefox 4.0 on an Intel Mac OS 10.5.8. Same problem with Firefox 3.6.16. You can save a Firefox window as a pdf file by using the File dropdown menu and selecting Print. Under Print, you can select PDF, then Save as PDF or Save as Adobe PDF. Firefox will save the file. If you try to open the file you get an error message that the file is damaged and cannot be opened. I did not have this problem in Safari; I followed the same procedures and the pdf file opened fine in Adobe Reader. Why is Reader rejecting the pdf file produced by Firefox when it did not reject the pdf file produce by Safari?

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Protected View Error "The file is corrupt and cannot be opened"

    All 
    I have a problem with Protected View in Office 2010 on Windows 7.
    Symptom:  When downloading a file from the Internet, the file will not open if launched directly from the source location, or saved locally and then opened.  This
    is impacting both Word and Excel.  I haven’t tested other applications.  The user gets the error "The file is corrupt and cannot be opened.".
    Expected behaviour:  Documents should open in Protected View because they are coming from an untrusted zone (Internet Zone).
    Troubleshooting Results:
     -      If I turn off Protected View the error goes away and the documents open without
    issue (but not in Protected View obviously)
    -      If I save the file locally, then copy it to a network drive, the problem goes away (because the zone information is changed?).
    -      If I save the file directly to a network location, then open it, the problem does not impact me (also doesn’t open in Protected View)
    -      If I repair Office the problem is NOT fixed
    -      If I reinstall Office the problem is NOT fixed
    The problem doesn't impact all machines, but any new machine I build suffers the problem.  All Protected View options are set by group policy and all machines are getting the correct settings.
    -       The setting “Enable Protected View for files originating from the Internet” is enabled
    -       The setting “Enable Protected View for files located in potentially unsafe locations” is enabled
    -      The setting “Enable Protected View for Outlook attachments” is enabled
    -      Enable Data Execution Prevention mode is enabled
    Has anyone seen this problem or can anyone offer suggestions of where to start looking for the root cause?  There are lots of postings on this around the various Internet forums, but most
    just suggest turning off Protected View, that is not a valid solution to my mind, Protected View is there for a very sound reason and it is not something I'm willing to turn off, especially when it is working on some machines as expected.
    Thanks.
    James.

    Thanks for coming back, James, and I'm glad you've found the source of your
    problem.
    As an aside, I had no idea HP made software like that and will take a look
    at it - or would if I could. Personally, although I love their hardware, I
    wouldn't touch HP software, and the fact that their web page doesn't load
    (in IE8) just reinforces my feeling.
    Enjoy,
    Tony
    www.WordArticles.com
    "jsc.19" wrote in message news:f9aaa05d-ad62-4f0e-96e1-6bbeb4c7098d...
    > Will, thanks for taking the time to post some suggestions. I understand
    > Protected View perfectly well and my post is because Protected View is not
    > behaving as it should. I think my dot points above show this, still,
    > thanks for taking the time to post. I think Tony is more on track with
    > his questions around what has changed in my build, and this is the area
    > I've focused on over the few days since posting.
    >
    > I've pulled my build apart and put it back together and found the issue.
    > This was tedious to say the least, but turned out worthwhile. A program
    > we used called Trim Context Desktop
    > (http://h71028.www7.hp.com/enterprise/w1/en/software/information-management-trim.html)
    > is part of our SOE. This is a records management tool, but we only use a
    > small feature set, and all the Office integration options that can be
    > configured during install are turned off, but it turns out that the
    > application still impacts Office. If I uninstall the Trim client from our
    > SOE, Office Protected View starts working as expected. We knew the full
    > Trim suite wasn't ready for Office 2010, but assumed, wrongly, that since
    > we didn't use the Office integration features we were OK. All our testing
    > was around the application and it works fine, I just didn't connect it to
    > the Office issues until systematically eliminating changes from the SOE
    > build. Keep a log of your changes!!! It helped me reverse things until I
    > found the problem.
    >
    > Uninstalling Trim also fixes and issue I had in Outlook where the
    > previewers wouldn't display Office documents, reporting that the
    > previewers were not installed.
    >
    > We will go to HP to get some support and advice around this before putting
    > Trim back in to the SOE.
    >
    > Anyone - if you have similar problems, can I suggest you look at all your
    > Office add-ins and also any applications that may potentially hook in to
    > Office.
    >
    > Cheers all.
    >
    > James.
    >
    >
    >
    Enjoy,
    Tony
    www.WordArticles.com

  • Outlook 2010 error - The file is corrupt and cannot be opened

    Hi experts
    Im getting the error - "The file is corrupt and cannot be opened", when opening office attachments in outlook 2010.
    I’ve tried disabling the protected view options in office which hasn’t fixed the issue, the only suggestion I have seen which I’m sure would work is to delete
    the user profile and recreate. This seems a bit over kill to me, does anyone know what files I need to remove to fix the issue.
    Thanks

    Hi,
    You can try using the Fix it tool in the following KB article to fix the issue:
    http://support.microsoft.com/en-us/kb/2387587
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • This adobe Muse site file is damaged and cannot be opened.

    This is a nightmare. I finished this website, went to go and update and got the message that the site file is damaged and cannot be opened. Are you serious? What can be done to get the file back, and how can this be prevented from happening again? I may have to completely toss out Adobe Muse because this is not good. Please help.

    Please send us the .muse file and the MuseLog.txt file from your Documents folder to [email protected] along with a link to this thread. If the files are larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (If you use a service, please include your return e-mail address in the body of the message, since not all services include it in the sharing invite they send.) Thanks.
    Was the file stored in a synchronized folder (i.e. Dropbox, Creative Cloud Files folder, etc.)?

  • This Adobe Muse site file is damaged and cannot be open.

    Hi all,
    While making some edits to my muse site, my mac froze, and I waited for about 10 mins and it was still frozen--so I forced restarted my computer. Upon re-opening the file, I received the message "This Adobe Muse site file is damaged and cannot be open." I was wondering if there is any way to recover the file. I have a very recent HTML export of the site, is there a way to re-import that into a muse file? Or perhaps the file is somehow able to recover? I'm on an iMac that was just bought. It's pretty frustrating because my last backup was from two weeks ago and there have been major updates to the design of the site. At the very least, I have the latest export to copy the layout from, but my site is 50+ pages. Thanks in advance for any help.
    -Jack

    I don't have good news. The file is truncated. It's shorter than it should be and the missing information isn't something I can manufacture.
    From your description of events and looking at the information in your log file we believe you hit a rather obscure weakness in the Mac OS, or perhaps Mac hardware or the hard drives/controllers used. When an application writes to a file and requests the file be flushed to the physical media, two things occur. The first is the data is written to the physical media and the second is a table on contents on the media is updated to indicate the new length of the file. In this case it appears the Save completed successfully as far as Muse could tell (the success is reported in the log), but what probably occurred is either a very low-level OS crash and/or your restart of the computer occurred before the length of the file was updated in the table of contents.
    Unfortunately, after some time spent searching online, it doesn't appear as though there are any Mac OSX tools that will re-extend a file without altering the bytes in the newly extended area. Or at least I couldn't find any (and it makes sense for security reasons that the old data wouldn't be there when the file was re-extended). Even if there is such a tool, it's very likely other activity on your machine since the restart has already overwritten those bytes with some other file, so the missing part of the file is now gone.
    I'm sorry, but I'm not aware of any way to recover or repair your file.

  • The muse file is damaged and cannot be opened

    Help!  I just completed my website for a company and was planning to publish it today but when i opened the file it states  " the muse file is damaged and cannot be opened": What can i do now?

    Nope, it is not synchronized to any online software. I merely made 2 copies, one in a hard disk, another in another computer. which cant be loaded either
    Date: Tue, 4 Jun 2013 22:45:25 -0700
    From: [email protected]
    To: [email protected]
    Subject: the muse file is damaged and cannot be opened
        Re: the muse file is damaged and cannot be opened
        created by Zak Williamson (Adobe) in Help with using Adobe Muse - View the full discussion
    Was this file stored in a folder synchronized by Dropbox or any other folder synchronization software?
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5380462#5380462
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5380462#5380462
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5380462#5380462. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Help with using Adobe Muse by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Excel Files become "Broken" and cannot be opened

    Our environment is as follows:
    SharePoint 2013 server, web application running in 2010 mode.  Our users are primarily on thin clients in a 64-bit Citrix environment running Office 2013 applications.  We use a redirected desktop/my documents on a network drive so that users will
    have their documents and settings on any computer they log into.
    The issue we've run into is that sometimes one of the Excel files becomes "broken" and will no longer open.  This seems to be related to when a user has the file open for long periods of time and loses connectivity or if the user's Excel /
    session crashes.  When the file becomes broken, the symptoms are:
    Open document from SharePoint and Excel splash screen reads:
    1.  Starting...
    2.  Contacting the Server For Information.  (This message lasts ~2 min)
    Then an error message in Excel states:
    "Microsoft Excel is waiting for another application to complete an OLE action."
    OK
    "Could not open 'https://sharepointurl/site/subsite/documentlibrary/document name.xlsx'."
    OK
    Microsoft Excel cannot access the file
    'SameFilePathAsAbove'.  There are several possible reasons:
    The file name or path does not exist.
    The file is being used by another program.
    The workbook you are trying to save has the same name as a currently open workbook.
    OK
    Empty workbook
    We've had problems determining "who" broke it, but the result is the same - nobody is able to open it, whether using Excel2013, Excel2010, or the Excel Services thru the SharePoint "view in browser" option.
    Our terminal servers reboot nightly, we've tried rebooting the 2 SharePoint application servers and the SharePoint SQL server to no avail.  It seems like the file is stuck waiting for itself.  In some cases, we've found that older versions of the
    file can be restored (generally a few versions back) but when versioning is not enabled then that possibility is out.
    We cannot seem to resolve where the issue lies at it's core or how to resolve it.  This happens much more frequently for the documents that users keep open for long periods of time making modifications to them, but we suspect that's because they are
    just more likely to have a SharePoint document open if their computer or Excel client crashes.

    They don't want us (the dealers) to edit the spreadsheet, but they do want us to read it. It's their pricelist, they wouldn't sell a lot of equipment if we couldn't see how much it costs! The point is that Numbers won't even open a spreadsheet that is edit protected, not read protected. This is a major issue, it should at the very least tell me I can open or import the sheet as a read only.
    Excel will always open the spreadsheet, it just can't make changes to it.
    For right now, when I need to get information from the pricelist in Excel, I have to copy and paste the info from the edit protected page to another blank sheet. This is a royal PITA because the Excel pricelist has 50 plus pages. I have been officially told to do that by my manufacturer. But they won't give anyone the password to unprotect the edit function of the sheet. Go figure.

  • Illustrator error opening eps file exported from sketchup pro 8

    When I attempt to use Illustrator CS6 to open an .eps file exported from Google Sketchup Pro 8 I get the following error message "the file is an unknown format and cannot be opened".    If I try to place/link the file I get this message "can't place the illustration. Could not set a position inside the file."  Any thoughts on why I'm having this issue?  Is there an eps version compatibility issue I should be aware of?

    Hi Mike.  Here is the screenshot you requested.

Maybe you are looking for