Unable to open files with unicode filenames

Hi,
I am attempting to load a file that contains unicode
characters in the filename with the Flash Player 9 ActiveX control
but I am unable to do so. If however I switch my system's code page
via the regional and language options to a code page that contains
the characters, then the file opens successfully.
For example, if I attempt to load a file named
fileβ.swf, it fails to load. However if I switch my language
settings to Greek (code page 1253) then the file opens
successfully.
Can anyone shed any light on this issue?

Go to the Windows Control Panel and ensure that playback device is set correctly.

Similar Messages

Unable to open files with Mediasource - Ze

I just purchased the Creative Zen Micro player, and am successfully ripping CDs. However, I cannot use the MediaSource program to actually open or listen to any files on my harddri've or CDs. I get the following message - Unable to open the necessary device(s) for playback. It may be in use or unavailable.
I don't have a clue what's going on. My audio device is SoundMAX Digital Audio... I don't know if that helps or means anything....but I'm lost. I appreciate any help out there!

Go to the Windows Control Panel and ensure that playback device is set correctly.

CFContent open file with # in filename

I am trying to launch a file when the user clicks on a link. Sometimes the filename has a # sign in the name, like "My File #1.xlsx". When they click it, they get an error saying "The file specified in the contentTag does not exist" and then the shows .../My File not found.
Additionally, though I can't remember for sure at the moment, I think I've had trouble with a few other characters such as ^, *, ?, ", <, >, |. And consecutive periods (.) like My...Filename.xlsx. However, I can live with that problem but not the # in the filename!
Surely there's something I can do to launch such a file.
Here's what I'm using:
this is the call: <td><a href="./fileopener.cfm?attached_file=true&file_location=#qryGetFileNames.ServerDirectory# \#qryGetFileNames.ServerFile#">#qryGetFileNames.ServerFile#</a></td>
<cfset file_location = "#url.file_location#">
<cfheader name="content-disposition" value="attachment;filename=#file_location#">
<cfcontent deleteFile="no" file=#file_location# reset="yes">
Thank you.

Have you tried escaping the # ?
#replace(file_location,"#","##","all")#
OR
In the URL: #URLEncodedFormat(qryGetFileNames.ServerFile)#
^_^

Adobe Illustrator CC can't open files with "cmd O"

After Adobe Illustrator CC update unable to open files with "cmd O" while CS6 works perfectly.

Moving the discussion to Illustrator.
Thanks,
Atul Saini

Process.start("winword", filename) can not open file with space in the path and name

Hi,
I am trying to write a class which can open file with selected application. for simplicity, now I just hard code the varaibles.
the problem: if the path or file name has space in it, even it exist, winword still can not open it.
could someone kindly show me what I did wrong and how to do it properly.
Thanks in advance.
Belinda
public static class FileOpen
public static void info()
string path = @"c:\a temp folder\aaa 1.txt";
if (File.Exists(path))
    // the file I am using in the sample does exist
     MsgBox.info("yes");
else
     MsgBox.info("no");
// working
//Process.Start("winword", "c:\\aaa.txt");
// not working
//Process.Start("winword", "c:\aaa.txt");
// not working
Process.Start("winword", "c:\\a temp folder\\aaa 1.txt");
// not working
Process.Start("winword", path);

string AppPath;
AppPath = ReadRegistry(Registry.CurrentUser, "Software\\FabricStudio", "TARGETDIR", value).ToString() + @"help";
string FileName = "'"+ AppPath + "\\ImageSamples.doc" + "'";
try
System.Diagnostics.Process.Start("Winword.exe", FileName);
can any body please help for this.
where i am making mistake?

Unable to open PDF files with Adobe Reader, Mac trying to open files with Quicktime instead, but not succeeding. HELP!

Unable to open PDF files with Adobe Reader, Mac trying to open files with QuickTime instead, but not succeeding. HELP!

Hi BDAqua,
Thanks for the info, I dragged a PDF to desktop ctrl-, get info. change all to open with adobe.
Problem solved, many thanks for a quick response.
Barry69

Unsolved: unable to open file because it isn't a valid Keynote document

I'm trying to open a presentation I made some time ago, it is a .key file I used to open without any problems. Now the message appears:
"Unable to open file because it isn't a valid Keynote document".
I tried the solution described here, but it didn'd work: i change extension to .zip, unzip it and there is no index file. There are only pictures from the presentation in .tiff
I also sent the file to my friends and they had the same problem opening it. It's very strange, I've successfully opened it before. And the problem is only with THIS file!
Please help me out!

Have you tried to create a new Keynote Presentation? Do you have another previously saved Keynote file you can try to open? These will make sure it is a problem with this specific presentation and not the whole program.
Try to delete the Keynote Preferences. They are located in the folder Macintosh HD>Users>your username>Library>Preferences and titled com.apple.iWork.Keynote.plist.
Your profile shows that you are still on Mc OS 10.6.6, is that true? You might try to update to 10.6.7 as I believe that there was a font issue fixed in this update (I don't know for sure since I am still on 10.5.8).
Try those and report back and we will see what we can come up with.

Error 'Unable to open file' when downloading SAP Query to Excel

Hi all
I'm running a SAP Query which is set to download straight to a spreadsheet (Pivot Table / Microsoft Excel). Intermittently it does not work - apparently at random (at least, I've can't recreate the error at will).
It does one of the following:
- Works ok, and creates the pivot table
- Gives an Excel error message 'Unable to open file', then returns to the 'save the data in a spreadsheet' popup when enter is pressed on the error.
- Does not issue error message, just goes to the 'save the data in a spreadsheet' popup.
In the last two cases, the excel pivot table sheet is not created.
Has anyone seen anything similar, or have any idea as to what is causing the problem?
Any help gratefully received!
Not urgent as I've found a way round - further testing seems to show that I don't get the error is Excel is already open - but in the past I've run many SAP query downloads without needing to open Excel first. I suppose it's possible that this is just something to do with the Excel setup at the user site
Message was edited by:
E Gregory

Hi,
Ensure that file name with same name and in same path should not be open while saving the data.
Award if it helps.
Jogdand M B

Snow Leopard 10.6.2 CS4 InDesign can't open files with a "#" in file path

Snow Leopard 10.6.2 CS4 InDesign can't open files with a "#" in file path using any of these perfectly normal methods:
1. double-click file in the Finder (e.g in a Folder on your Mac or on your Mac desktop etc.)
2. select file and choose "File... Open" command-o in the Finder
3. drag file to the application icon in the Finder.
4. Select file in Bridge and double-click, choose File.. Open.. or Drag icon to InDesign icon in dock.
If you try to open an ID file named with a "#", you will get an error message "Missing required parameter 'from' for event 'open.'"
This happens to any InDesign file that has a "#" (pound sign, number sign, or hash) in the filename or in the file path (any parent folder).
To reproduce
Name an InDesign file Test#.idd Try to open it in the Finder or Bridge (as opposed to the "Open" dilaog of InDeisng itself).
"Solution"
The file WILL open using File... Open... command-o while in InDesign application.
Rename the file or folders that have a "#" (shift-3) in the filename.
Report to Adobe if it bugs you.
This does not occur in "plain" Leopard 10.5 nor Tiger 10.4
Untested in Panther or before and
Untested with CS3 and earlier in Snow Leaopard.
Anyone have those and want to try this... ?

In case this really bothers you: we've added a workaround for this into Soxy. If you enable the option, these documents will open fine on double-click.
You need Soxy 1.0.7 from:
http://www.rorohiko.com/soxy
Go to the 'Soxy' - 'Preferences' - 'Other' dialog window, and enable 'Open InDesign via Script'
(Irrelevant background info (it's all invisible to the user): the workaround works by special-casing how Soxy opens documents in InDesign: instead of using AppleScript, Soxy will use ExtendScript to instruct InDesign to open the document - which works fine).

Unable To Open File.......... The system cannot find the file specified

hi all.
First time poster.
i have a windows VM running on my macbook...
have had no troubles for the last 2 months using hourly...
have just restarted the mac, and have come up with the unable to open file error...
i'm confused (extremely new to mac)
is there anything i need / can do to fix? (had a heap of stuff i needed on the windows VM)
thanks

Welcome to the Community,
I can't tell you what was causing this, but according to the support bundle you provided, three of the required .vmdk files are missing (Virtual Disk-s001.vmdk, Virtual Disk-s002.vmdk, and Virtual Disk-s003.vmdk). These files however still existed when you used the VM at "2015-05-23T12:29:04.017+10:00" (see vmware.log).
Since the VM is running on a snapshot and the base .vmdk files have a time stamp of April, 14th, you should be able to recover these three files from a recent backup (assuming you are regularly backing up your system). You may also want to check whether there's a lost+found folder on your system which contains the files!?
André

URGENT - Error "Unable to open file because it isn't a valid Keynote document" - and there is no index file (so the usually suggested solution doesn't work)

Hi there,
As you see in the heading, I am getting the error "Unable to open file because it isn't a valid Keynote document". There has been a number of threads on this and there seems to be a usual work around that works in many cases, by changing the file extension to .zip and then looking for the index file and making some more extension changes...unfortunately, in my case (and it also happened to others), there is no index file, so the usually suggested solution doesn't work...Can someone please help? I am working on a tight deadline and would like to try and recover the file.
Thanks a lot in advance.
Best,
Just a regular apple user
PS: any other presentation opens fine in Keynote (09)

Have you tried to create a new Keynote Presentation? Do you have another previously saved Keynote file you can try to open? These will make sure it is a problem with this specific presentation and not the whole program.
Try to delete the Keynote Preferences. They are located in the folder Macintosh HD>Users>your username>Library>Preferences and titled com.apple.iWork.Keynote.plist.
Your profile shows that you are still on Mc OS 10.6.6, is that true? You might try to update to 10.6.7 as I believe that there was a font issue fixed in this update (I don't know for sure since I am still on 10.5.8).
Try those and report back and we will see what we can come up with.

REP-110: Unable to open file

9iAS report server has been configured.
There is Infrastructure & Business Intelligence Forms home is on same server.
When i try to run the demo url from web browser :
http://<FQDN server>:8888/reports/rwservlet?destype=cache&desformat=PDF&report=Inventory_Report.rdf&userid=scott/tiger@iasdb1
its giving the error as:
REP-110: Unable to open file 'Inventory_Report.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'Inventory_Report.rdf'.
Tried giving full path also But No Luck!
The file is existing in the proper given path with required permissions.
Can somebody help me.. If any configuration related help, path setting ??

I have had issues with reports failing to run. My solution was to change settings on the Report App server. I changed the engine parameters to:
initial engines=2
maximum engines=5
minimum engines =2
maximum job before shutdown (englife)=1
maximum idle before shutdown=30
JVM Option= -Xms512m -Xmx512m
When in the report App server, you should see a page with settings similar to above. Make sure you try these settings in the test environment first (you can change them around then to see what works best).
Edited by: E Slazyk on Nov 20, 2009 3:03 PM

REP-0110: Unable to open file 'OCL_MASTER_REPORT'

Job Name: OCL_RXCRCLRC_73
Job Status:
Terminated with Error :
BACKGROUND is deprecated. See help for more information. REP-0110: Unable to open file 'OCL_MASTER_REPORT'. REP-1070: Error while opening or saving a document. REP-0110: Unable to open file 'OCL_MASTER_REPORT'.
Anybody met with the same situation? Thanks.
DBMS: oracle 9.2.0.3.0
Report Server: Oracle 9iDS

PS:
Oracle Clinical Version: 4.5

Indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.

indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.
thanks in advance!

If you are unable to enter the passcode into your device, you will have to restore the device to circumvent that passcode.
Is the music purchased from iTunes? If it is you can contact iTunes support and ask them to allow you to re-download the music that you purchased from iTunes.
Also, do you sync the device regularly? When syncing an iPod Touch/iPhone a backup file is made. That backup file doesn't contain your music but it does contain your address book, application data, pictures, notes, etc. After restoring your device, you can try restoring from the last backup that was made of your device so you will not have to start over completely from scratch.
Hope this helps!

Golden gate - Unable to open file (error 2, The system cannot find the file specified.)

Hi Everyone.
I have configured GoldenGate on Win2008 R2, but when I start replicat, this fall.
Initially:
GGSCI (WIN-NKC50KUIT0G) 19> start replicat rep1
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (WIN-NKC50KUIT0G) 20> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
REPLICAT    STOPPED     REP1        00:00:00      00:37:53
GGSCI (WIN-NKC50KUIT0G) 21> info replicat rep1
REPLICAT   REP1      Initialized   2013-11-02 22:23   Status STOPPED
Checkpoint Lag       00:00:00 (updated 00:40:28 ago)
Log Read Checkpoint File C:\app\Oracle\product\gg\dirdat\tr000000
                     2013-11-02 22:23:55.000000
With VIEW GGSEVT:
2013-11-02 23:15:31 INFO    OGG-01815 Oracle GoldenGate Delivery for Oracle, R
EP1.prm: Virtual Memory Facilities for: COM
    anon alloc: MapViewOfFile anon free: UnmapViewOfFile
    file alloc: MapViewOfFile file free: UnmapViewOfFile
    target directories:
    C:\app\Oracle\product\gg\dirtmp.
2013-11-02 23:15:31 ERROR   OGG-00446 Oracle GoldenGate Delivery for Oracle, R
EP1.prm: Extract file not found or no records beyond begin time.   why???
2013-11-02 23:15:31 ERROR   OGG-01668 Oracle GoldenGate Delivery for Oracle, R
EP1.prm: PROCESS ABENDING.
After I tried with:
GGSCI (WIN-NKC50KUIT0G) 8>Alter rep1, EXTSEQNO 0
but
GGSCI (WIN-NKC50KUIT0G) 9> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
REPLICAT    ABENDED     REP1        00:00:00      01:11:50
why??? abended??
In logs:
2013-11-03 14:07:02 INFO    OGG-00996 Oracle GoldenGate Delivery for Oracle, REP1.prm: REPLICAT REP1 started.
2013-11-03 14:07:02 ERROR   OGG-01091 Oracle GoldenGate Delivery for Oracle, REP1.prm: Unable to open file ".\dirdat\tr000000" (error 2, The system cannot find the file specified.). why???
2013-11-03 14:07:02 ERROR   OGG-01668 Oracle GoldenGate Delivery for Oracle, REP1.prm: PROCESS ABENDING.
GGSCI (WIN-NKC50KUIT0G) 12> info rep1, detail
REPLICAT   REP1      Last Started 2013-11-03 14:30   Status ABENDED
Checkpoint Lag       00:00:00 (updated 01:19:03 ago)
Log Read Checkpoint File .\dirdat\tr000000
                     First Record
Extract Source                          Begin             End
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   2013-11-03 12:54
Current directory    C:\app\Oracle\product\gg
Report file          C:\app\Oracle\product\gg\dirrpt\REP1.rpt
Parameter file       C:\app\Oracle\product\gg\dirprm\REP1.prm
Checkpoint file      C:\app\Oracle\product\gg\dirchk\REP1.cpr
Checkpoint table     target.checkpoint
Process file         C:\app\Oracle\product\gg\dirpcs\REP1.pcr
Error log            C:\app\Oracle\product\gg\ggserr.log
GGSCI (WIN-NKC50KUIT0G) 13> view param rep1
REPLICAT rep1
ASSUMETARGETDEFS
USERID target, PASSWORD oracle
discardfile .\discard\rep1_discard.txt, append, megabytes 10
DDL
map source.*, target target.*;
I don´t understand it, How I could solve?? Please help me!
Thank you.

What steps did you use to add the Replicat? Can you list those commands out.
Also, does this file actually exist on the server where Replicat is running: C:\app\Oracle\product\gg\dirdat\tr000000

Unable to open files with unicode filenames

Similar Messages

Maybe you are looking for