Unable to open itunes after upgrading

i just did a upgrade to my itunes now it wont open on my computer im using windows 7 64 bit

Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

Similar Messages

  • Unable to open itunes after update

    unable to open itunes after update

    I had a user with the same issue after updates and I was able to resolve. 
    I copied QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    I did so after uninstalling and re-installin, but I don't beleive that was necesssary.  Thanks to user thurdy.  This fix was from apple support for the error "iTunes stopped working".  Figured I'd give a shot and it ended up working.
    For reference the user was receiving the following errors exactly:
    "the procedure entry point ?fastfree@***@@YAXPAX@Z could not be located in the dynamic link library JavaScriptCore.dll"
    and
    "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error127)"

  • An unknown error occurred (-42110) when opening itunes after upgrading

    when opening itunes i get "an unknown error occurred (-42110) when opening itunes after upgrading to latest version.

    Try the following user tip:
    iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

  • Cannot open iTunes after upgrade due to missing .dll file

    I cannot open iTunes after a recent upgrade.
    The error is "Applepushservice.dll is missing.  Please reinstall iTunes."  Which I have now done 8 times.
    I have uninstalled everything, clear the cache and rebooted.
    Now what?  Can I download the file from somewhere else and if so, where do I install it?
    Many thanks.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • MacBook Air unresponsive after opening iTunes after upgrade to 11.1

    I recently upgraded my MacBook Air to new version of iTunes, I believe it was 11.1 if that was what came out yesterday, and now the computer is unresponsive once I open iTunes.  A sign in box for a premier networks podcast is displayed but I am unable to enter any information as it will not allow any input.  The iTunes and apple menu cannot be accessed.  The only way to regain control of the computer is to force quit iTunes.  The podcast that the sign in box appears to be associated with is a PBS podcast that was deleted a very long time ago.

    Hi mbharrison!
    You may want to try reinstalling the application by following the instructions in this article:
    OS X Mountain Lion: Reinstall apps that came with your Mac
    http://support.apple.com/kb/PH11201
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Unable to open iPhoto after upgrade to 9.1.3 (bought on apple store)

    Hello all
    I am unable to open my iPhoto after upgrading it with version 9.1.3 , bought in the apple store.
    The searching icon never stops.
    I trieded to synchro with my iPad (where I have a backup of all my pfoto's) but the system tells me that all photo's are still on my Mac.
    Can someone help me out, because I am rather a rookie in this kind of things
    regards
    Waldo

    Try this:  launch iPhoto with the Option key held down and try to create a new, test library. If you can then then your library is the culprit.
    If that's the case make a temporary, duplicate copy of your library (Finder ➙ File ➙ Duplicate) and apply the three fixes in order as necessary.
    Fix #1
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home()/ Library/Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library /Caches/com.apple.iPhoto folder. 
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    Fix #2
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #3
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Cant open itunes after upgrading to yosemite

    Cant open itunes on my macbook pro after upgrading to yosemite. Someone please help if they have faced similar issues.
    Thanks.

    Try Terence's instructions here  Is Iphoto gone ? i want it back!
    Pete

  • Cannot open iTunes after upgrading to 7.3.1

    Just traded my mini for a nano and upgraded from iTunes 6. I was able to install 7.3.1 (Windows XP) and sync the ipod so all of my music is on it, no problems. But after I closed iTunes after the syncing I can't re-open iTunes at all-- I get the message:
    'The iTunes Library.itl file cannot be found or created. The default location for this file is in the iTunes folder in the “My Music” folder'
    Please help!! Thanks.

    +HOWEVER, once my library finished loading into iTunes, another error message came up:+
    +The iTunes library file cannot be saved. An unknown error occurred (-1302).+
    Okay. It's sounding like there was some problem with the original library file (that you had for the previous version) that has been preventing the library update from going through properly. That would fit with the non-appearance of the new .itl file with the upgrade, and the problems with generating a new library file from the old version of the library file.
    So it might be worth trying a library recreation at this point in time. For instructions on that, the following document should be of some assistance.
    How to recreate your iTunes Library
    After the library recreation, does itunes launch properly? (without the 1302 we got from the attempt to revitalise the old library file?)

  • Cannot open iTunes after upgrading it because of computer version

    I just upgraded iTunes to the latest version last night and now it will not let me open due to the fact that I have a Mac Os X 10.4.6 and need 10.4.7 to open iTunes. Is there a way to upgrade the Mac Os X without paying money? If not, can I down-grade my iTunes then?
    Thanks a bunch!!

    Download any of the compatible updaters from this page or run the Software Update pane of System Preferences. Updating from any Mac OS X 10.4 version to any newer Mac OS X 10.4 version is free.
    (22940)

  • Can't open iTunes after upgrade: Procedure entry point AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey error

    Hi,
    I am using Windows 7 Professional, and upgraded my iTunes yesterday to 11.3. When I attempt to open iTunes, I am getting two error messages:
    iTunes.exe - Entry Point Not Found
    The procedure entry point AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey could not be located in the dynamic link library AVFoundationCF.dll.
    I clicked OK, and get another error message:
    iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 127)
    I reinstalled iTunes and still get the errors.
    Is there a solution to this problem? I would hate to uninstall and start over --- especially if that won't fix the problem.
    Thanks.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    Not an error message I recognise but the error has the same pattern as those in the first and third boxes suggesting that you've got an outdated .dll file that needs replacing. You should find the file in the Apple Application Support folder. Delete it and then repair Apple Application Support.
    tt2

  • I'm unable to open itunes after the recent upgrade. Runtime error R6034 is the error message. I recently replaced my iPhone and I don't want to loose my data by uninstalling and re-installing the itunes?

    Hi,
    I've recently replaced my iphone 5 and I couldn't restore my data into my new phone, as it asked me to do the software upgrade on itunes in my computer. So, I did the itunes upgrade, which is now causing the Runtime error R6034. I wonder if I would loose my data (i.e., can't restore the data into my new phone), if I follow the uninstalling & re-installing steps. Plz advice, as how this runtime error can be fixed and at the sametime, I will still be able to restore my data into my new phone.

    Suresh14 wrote:
    I wonder if I would loose my data (i.e., can't restore the data into my new phone), if I follow the uninstalling & re-installing steps.
    Uninstalling & Re-installing iTunes will not delete your iTunes Library Data.
    Do the following:
    Uninstall from Windows the following four programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
    Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
    Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

  • Can't open iTunes after upgrading

    I just upgraded to the newest version of iTunes and now I am getting the following message "The "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes."
    I have tried dragging an older version of my library into the Itunes folder but still keep getting the same message. Now I cannot do anything with iTunes and this is extremely frustrating. Any ideas or suggestions on how to correct this?
    Thanks in advance
    Roya

    Had the same problem.
    If you have a Mac:
    Hold down "alt" and click on your iTunes icon
    Click "Choose Library"
    Select "Previous Library" folder
    Select your most recently dated library
    iTunes should now open normally
    If you have a PC:
    Change the extension of your library file from ".itl" to ".old" and restart iTunes

  • Cant open ITunes after Upgrade

    Must have upgraded my ITunes recently because ITunes will no longer open unless I download the new Quicktime 7.6. My company computer is running MAC OS 10 with no option for Leopard. APPLE! You idiots! If your upgrade is going to render a customers ITunes unnusable without a system upgrade you need to put a warning in the upgrade message so customers can choose not to run the upgrade!!!! Not everyone can run out and get the newest hardware and software.!!!! Now I cannot open my ITunes and can't go back to the old. Not to mention that my $260 ipod started to skip before it was even a year old and according the the discussion boards there was nothing to do to fix it. Get your stuff together Apple!!!!
    This happened on my fathers ITunes operating on ad older Windows. He now cannot use his Ipod, because he cannot get an Itunes that will run on his computer!!! He can't upgrade without buying a new computer!!! And at 85 why should he buy a new one!!! Come on Apple!!!!

    First, Apple product developers do not participate here, so rants posted here will do little good since the rant probably will be seen only by we your fellow users.
    Second, why can you not upgrade to QuickTime 7.6? If it's just a matter of you not being able to find an appropriate version for your version of Mac OS X, just run Software Update on your computer, or look here:
    http://support.apple.com/downloads/#quicktime
    QuickTime 7.6 is available for Mac OS X versions back to and including 10.4.11, which is also the earliest version that the current iTunes release will run on. So there shouldn't be any problem, at least not as far as an available compatible version is concerned.
    This happened on my fathers ITunes operating on ad older Windows. He now cannot use his Ipod, because he cannot get an Itunes that will run on his computer!
    What version of Windows does he have? Did he have his iPod working before, or is this a new iPod? If so, the system requirements for the iPod are clearly stated, on Apple's web site and, I believe, on the iPod's box. If his system doesn't match the system requirements of the iPod, that's not Apple's fault.
    Regards.
    Message was edited by: Dave Sawyer

  • Cannot Open iTunes After Upgrading to 6.0.4

    I downloaded the latest version of iTunes and ever since, I cannot open the program on my computer. I have tried everything they say to do in the on line support manual. Does anyone have any suggestions? I have sent a few hours on this and nothing they tell me to try is solving the problem.

    hi goldylocks!
    Error Number: 0x80040707
    Description: DLL function call crashed: QTInstallCode.QuickTimePostInstallProc
    that's a known complication of a broken QuickTime. in this context, it usually means the installation configuration information of the QuickTime has been compromised.
    here's what we'll try first.
    Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
    Description of the Windows Installer CleanUp Utility
    next use the QuickTime component of the complete uninstall instructions in the following document as a guide to a manual removal of leftover QuickTime program files and folders.
    Trouble installing iPod, iTunes, or QuickTime software in Windows
    once we've got all the existing QuickTime scraped away, let's try another careful standalone QT 7.0.4 reinstall.
    does it go through properly this time? if so, does your itunes launch properly again?
    love, b

  • On my PC win7. Unable to open iTunes

    My PC win7,32 bit unable to open iTunes after 4 days gap nor open when iPhone 4S attached to PC,
    Try various trouble shooter but of no use, previously there was no issue,
    Let me know to overcome this issue

    uninstall itunes
    use regedit to search and delete ref's to itunes
    reboot
    reinstall itunes

Maybe you are looking for

  • Badi / Exit / Enhancement for replacing INSMK during PO creation

    Hi Gurus, we want to default the INSMK field (stock type) during Purchase Order creation.. Can someone help me findind the right BAdI / exit / enhancement for it? Thanks in advance, Regards, Alessio

  • Cisco ISE and New Version of AntiVirus...not DAT

    So I have ISE ready to go for our VPN users. Testing has been great and it looks like we are ready to roll out. Then comes along a new version of our corporate AntiVirus software. We have had Kaspersky EndPoint Security v8 since last August. Now Kasp

  • Handling BW variables/BO prompts

    Hi, What is the best-practice way of handling prompts/input variables in a BW/BO scenario when it comes to the time characteristic/dimension? I want to report on Cost Center Company Code Value Current Fiscal Period (user input) Value Year to date (ba

  • Premier Pro CS6 hangs exporting

    The export function starts and after a period and % complete hangs with no error message, it never hangs in the same % complete or after the same period, I need to force quit the application to continue. I am running Premier Pro CS6 (6.0.5) on an Mac

  • Stumped - Video Bit Rate too High Error

    I just upgraded to FCP 7x and I am trying to burn a disc on DV Studio Pro. It runs through the rendering fine, then when it is ready to burn it shuts down and says the video bit rate to high. So I went to the manual and the manual suggested changing