Unable to open LR edited file in PSCS3

I recently imported some images from a second internal HD on my Intel-MacPro into Lightroom. After editing the image in LR I tried to send it to PS. LR told me it was unable to prepare the image and would not open the file in PS. I have tried other images in this folder only to have the same problem.
I've searched the forums for an answer but found nothing that worked. I have plenty of disk space, the image is not write-protected, I can process the image in ACR from Bridge. I have LR 1.2.
I recently copied these images from my backup DVD of the originals to the second HD but none seem to open in PS from LR. I am still able to send other photos to PS that are on my 1st internal HD.
Help!
Thanks

I sorted out the problem. Turns out that although the individual pictures were not write-protected the folders they were in were 'read-only'. I changed the permission status and voila! Problem corrected.
I think the warning from LR should say something about not having access or permission to open the file rather than just telling us it is unable to do so. That way we could start looking in the right direction to solve the problem. I stumbled on this solution when I was trying to move the folder to another folder in Bridge and finally received a warning that I did not have permission to do this.
Hope this helps anyone who has this problem in the future.
Tony

Similar Messages

Error message: "Unable to open the physical file" when trying to attach AdventureWorks database

I have searched the internet and this forum and have not found an answer...
I am trying to install the AdventureWorks database into my single instance of MS SQL Server Express 2005. I am logged into my machine as an administrator and logged into SQL Server 2005 express 'sa'. I attempt to run the following script:
exec sp_attach_db @dbname = N'AdventureWorks',
@filename1 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf',
@filename2 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_log.ldf'
The error message I get back is:
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf". Operating system error 5: "5(Access is denied.)".
The folder "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data" and all the files in it are read-write. I am 100.0000% certain the files "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf" and "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Log.ldf" exist! They are the result of running the installation program AdventureWorksDB.msi, which I downloaded from: http://www.codeplex.com/MSFTDBProdSamples/Release/ProjectReleases.aspx?ReleaseId=4004.
What do I have to do to install the AdventureWorkds database????

Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day

[SQLSTATE 22001] (Error 8152)Unable to open Step output file.

Hi,
I have configured the backups from our SQL Server instance to tape directly with out storing in the local drive, so that the disk space allocated for storing the backups in the local drive is saved.
but i end up with the below error.
Executed as user: CORP\devsqlservice. select DATABASE_NAME = db_name(sd.database_id) from sys.databases sd where -- ONLINE
sd.state = 0 and sd.is_read_only = 0 group by sd.database_id order by 1 [SQLSTATE 01000] (Message 0) String or binary data would be truncated. [SQLSTATE 22001] (Error 8152)Unable
to open Step output file. The step failed.
I am clueless , why i face this error, Do any one of you face such problems in backup (scheduled backups) job.
hemadri

Hi Hemadribabu,
>>”string or binary data would be truncated”
As my research, the error above could occur in the case of passing string or binary data, whose length is larger than received object. So I recommend you to run the Transact-SQL script in SQL Server query window to check if this kind of issue exists, or
you can post your entire script for further analysis.
>> “unable to open step output file”
In addition, as for the error above, this issue can be caused by two reasons below.
1. The path of the output file is invalid. To fix the issue, please follow the steps below.
    a. Double click on the SQL Agent job.
    b. Switch to Steps tab, and click Edit.
    c. Click Advanced option.
    d. Change the path under Output file or delete the path. For a UNC path, you can
map a network drive and use the network drive instead.
2. Your account doesn’t have access to the folder. Transact-SQL job step runs as the owner of the job step, or as the SQL Server Agent service account. So please check the type of the job step and the account which your job step runs as, and make sure that
it has access to the folder. For more information about the process, please review the similar thread:
https://social.msdn.microsoft.com/forums/sqlserver/en-US/7610b484-98b7-42dc-816f-dbc884e84c6d/backup-database-permission-problem
Regards,
Michelle Li

How can I open and edit files that were developed and published by ftp to my host on my old macbook, which I can no longer access.

How can I open and edit files that were developed and published via ftp to my host on my old macbook, which I can no longer access. The HD containing the files cannot be accessed. I want to be able to download the published files to be edited in iweb?

You CAN'T download published files and then edit them in iWeb because iWeb can't open them - it has no import facility so is unable to open any html or css files - a previously published site.
You can download these files yes, but you'll need to use them as a guide or to cut and paste text from there whilst you re-build your site in iWeb.
The only other way is to download the files and then open them with an html editor such as TextWrangler or use one of the other web design programmes out there that is capable of importing html and css such as Dreamweaver of Flux 4.
These are your only alternatives as iWeb can't import and if you want to continue to use iWeb, then you'll have to re-build your site from scratch. If you do just remember to back up your domain.sites file this time around - it is found under your User/Library/Applicaion Support/iWeb/domain.sites.

REP-0004: Warning: Unable to open user preference file.

Hi,
I am creating an invoice header in Payable through open interface in r12. I have inserted one line in ap_invoices_interface table.
When I run Payables Open Interface Import request, it completes normal but invoice does not create.
Please see below log file and provide your guidence.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXIIMPT module: Payables Open Interface Import
+---------------------------------------------------------------------------+
Current system time is 24-DEC-2013 12:39:46
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_source='MANUAL INVOICE ENTRY'
p_batch_name='test4'
p_purge_flag='N'
p_trace_switch='N'
p_debug_switch='N'
p_summary_flag='N'
p_commit_batch_size='1000'
p_user_id='19334'
p_login_id='2499994'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00000: 0 invoice(s) were created during the process run
MSG-00000: 0 invoice(s) were fetched during the process run
MSG-00000: summarize flagN
MSG-00883: After Repport Trigger: Setting the Org Context to Multiple
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 24 12:39:47 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Regards
Farooq

Please also see if the following docs help.
R12: Master Troubleshooting Guide for Supplier Contacts Open Interface Import Report (APXSCIMP) [Video] (Doc ID 1373699.1)
R12: REP-0004 Error While Running Supplier Contacts Open Interface Import Program (APXSCIMP) (Doc ID 1195815.1)
R12: APXSUIMP Ends With REP-0004 Error, But Output Does Not Display Reason for Rejection (Doc ID 1060824.1)
Thanks,
Hussein

Unable to open the downloaded file

Unable to open the downloaded file:
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.1.0 -> for Windows x86 -> File2
http://www.oracle.com/technetwork/middleware/performance-management/downloads/hyperion-foundation-1112-086772.html
Error message -
Cannot open file: it does not appear to be a valid archive. If you download this file, try downloading the file again.
Tried many a times and used various unzipping tool.

do not pause the download in the middle of the download.
with some download software, you can pause/stop the download in middle and continue.it will corrupt the software.
else in middle the due to network... it may corrupt.
check/compare the size with the original bytes mentioned in the oracle software download index size matches your downloaded file size.
try to download it again.
Good Luck.

Unable to open Form Repsonse File

Hello,
I am unable to open a response file to one of my distributed forms.
I have made no changes to my system or the file. I get the following error
"To view the Flash technology content in this pdf file, please install this version of Flash Player that supports Adobe Reader and Acrobat"
If I click Proceed to download page, nothing happens.
Any suggestions??
NB: All other flash content works on this computer, Flash version 11,7,700,179

do not pause the download in the middle of the download.
with some download software, you can pause/stop the download in middle and continue.it will corrupt the software.
else in middle the due to network... it may corrupt.
check/compare the size with the original bytes mentioned in the oracle software download index size matches your downloaded file size.
try to download it again.
Good Luck.

Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

hi,
am running the below command for moving sql serevr mdf and ldf files from one drive to another : c drive to d drive:
but am getting the below error
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
use master
DECLARE @DBName nvarchar(50)
SET @DBName = 'CMP_143'
DECLARE @RC int
EXEC @RC = sp_detach_db @DBName
DECLARE @NewPath nvarchar(1000)
--SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
DECLARE @OldPath nvarchar(1000)
SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
DECLARE @DBFileName nvarchar(100)
SET @DBFileName = @DBName + '.mdf';
DECLARE @LogFileName nvarchar(100)
SET @LogFileName = @DBName + '_log.ldf';
DECLARE @SRCData nvarchar(1000)
SET @SRCData = @OldPath + @DBFileName;
DECLARE @SRCLog nvarchar(1000)
SET @SRCLog = @OldPath + @LogFileName;
DECLARE @DESTData nvarchar(1000)
SET @DESTData = @NewPath + @DBFileName;
DECLARE @DESTLog nvarchar(1000)
SET @DESTLog = @NewPath + @LogFileName;
DECLARE @FILEPATH nvarchar(1000);
DECLARE @LOGPATH nvarchar(1000);
SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
exec xp_cmdshell @FILEPATH;
exec xp_cmdshell @LOGPATH;
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
go
can anyone pls help how to set the db offline. currently i stopped the sql server services from services.msc and started the sql server agent.
should i stop both services for moving from one drive to another?
note: I tried teh below solution but this didint work:
ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
Update:
now am getting the message :
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
(3 row(s) affected)
(3 row(s) affected)
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

First you should have checked the database mdf/ldf name and location by using the command
Use CMP_143
Go
Sp_helpfile
Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
Database is already detached that’s why db offline failed
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
Attached step is failing as there is no mdf file
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
Solution:
Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

REP-0004 warning: Unable to open user preferance files

Hi,
I am new to R12. This is the upgradation project 11.5.1.2 to R12. we are newly installed the R12 application and 10g database.
I am going to customize the standard report 'Printed Purchase Order Report', the rdf file is 'POXPRPOP'. but it is not getting any out put and xml tags also. even standard report also not getting any output and I noticed in logfile that the error like 'REP-0004 warning: Unable to open user preferance files'.
I have tested in backend, its getting the data. then I have added command MO_GLOBAL.SET_POLICY_CONTEXT('S'.org_id) in before report trigger also. but getting same issue.
Could you please help me wheather I need do any setups/modifications in RDF or Application. This is very urgency.
Thanks in Advance.
Regards,
Thirupathi

Hi Hussein,
Thank you for your valuable response.
I have followed the same steps for this customization what they are given in the metalink ID 374165.1.
And one more thing, I am not getting any output if i ran the standard program 'Printed Purchase Order Report (Portrait)' in R12. what it could be the problem.
Regards,
Thirupathi

Unable to open the XML files in Nakisa

Hi Gurus,
We are unable to open certain XML files in Nakisa. They show up as encrypted in the notepad or fail to open using the XML Marker. The files in question are
AppResources.xml
LoginConfiguration_SAP_Standard
LoginConfiguration_Anonymous
Purpose: We want to enable the SSO with the portal . We have checked the radio button but nakisa does not recognize the SSO ticket from the portal (Any folder in Nakisa where we need to place the Portal ticket?)
Also we want Nakisa to show the org chart for the logged in user. Luke had mentioned that some changes need to be made in the AppResources.xml (hope i correctly remember this) and we were looking to make these changes (rather try out.. any pointers please..?)
Thanks and Regards,
Arun E V

Hi Arun,
These files are encrypted. If your organisation is a partner with Nakisa you can obtain the decrypter from them.
Portal SSO works without any configuration directly in the XML files. If you are getting an error stating that the Portal ticket cannot be interpreted then your configuration is not correct. In your URL iView you need to ensure the fully qualified domain name (FQDN) is used for the application URL. In the Administrator Console you need to ensure you enter the system details (Host, Sys Nr and Client) for the backend system which holds your SSO ticket for that Portal. You need to use FQDN here too.
There is additional security configuration that can be done in the XML files but SSO will still work with just the Administrator Console configuration.
I hope that helps!
Luke

Unable to open in pdf files in ipad 3 using adobe reader 10.2 but able to do so in ipad 2 using adob

Unable to open in pdf files in ipad 3 using adobe reader 10.2 but able to do so in ipad 2 using adobe reader x 10.1 .

Can you please share the file you are trying to open with us at [email protected]? Also, can you please confirm that you've updated the Adobe Reader on your iPad 3 to the latest version using iTunes or the AppStore app?

I am unable to open a PDF file in Firefox 4. I have no problem with IE8

I am unable to open a PDF file in Firefox 4. I have no problem with IE8

Hi Nupoorv,
Thanks for contacting us.
Could you please provide some details like from where you downloaded your pdf , and what happens when you click on 'Open in Adobe Reader' .
On tap on 'Open in Adobe Reader' does Adobe Reader application come in focus .
You can follow think link also which provide details of how you can open documents in Adobe Reader http://forums.adobe.com/docs/DOC-2532
Let us know if you still face problem.
Thanks
-Satyadev

When I open an encryted pdf file in my Hp Slate 7 voice Tab it was unable to open the pdf file.Tje same file was opening with other pdf reader software.Kindly Help.

When I open an encryted pdf file in my Hp Slate 7 voice Tab it was unable to open the pdf file.Tje same file was opening with other pdf reader software.Kindly Help.
[spam link removed]

Could you please send the pdf to [email protected] so that we may investigate the issue?
Thanks,
Adobe Reader Team

After updating silverlight, i'm unable to open any pdf files in the system

After updating silverlight, i'm unable to open any pdf files in the system

According to your User Agent you posted this question using Internet Explorer 11 on Windows 8.1. Are you having a problem with Firefox? What Firefox version?
You said you are having a problem opening PDF files on your system. Can you explain that better? Mozilla Support can help you with opening PDF files in Firefox, which uses a built-in PDF reader. Maybe one of these articles will help?
* [[View PDF files in Firefox without downloading them]]
* [[How to disable the built-in PDF viewer and use another viewer]]

Elements 7: Unable to view or edit files with extension cr2

Had to reload elements 7 after disk crash. Restored from backups. Unable to view or edit files with extension cr2

Unable to view or edit files with extension cr2
Which Canon camera model? Elements 7 is probably just too old to use the required Camera Raw plugin for your camera.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Camera Raw (the plugin used to read Raw files) is constantly updated to support new cameras as they come on to the market.

Unable to open LR edited file in PSCS3

Similar Messages

Maybe you are looking for