Unable to open my Premiere Pro CS6 projects

Hi,
I am using Adobe Premiere PRO CS6 about two years. A few days ago i tried to open a project i createt half a year ago but was not able to. I got alway the error message Premiere Pro has encountered an error.
when i click to continue appears the message that the project could not be loaded beacuse its maybe dameged or contains old elements.
So what I tried,
-     Reinstall Adobe premiere Pro CS6 (deleted all files and settings before)
-      create an other User on the computer to be sure its not the user profile
-     installed Premiere on a virutal machine
-      open an other project from autosave
     always the same error
than I created a new project worked for about one hour on it. after saving closed the project => next day continued with the work on that file saved again, an since today that file is also not working any more same error as on the other fiel. The old file (saved after first day) is still working.
I hope you can help me with that issue, in about a month I will have to make a bigger project and if Im not sure that premiere is working correct i might loose a lot of time.
thanks for your help!!

Hi Mich1989,
Uninstall iCloud to get Premiere Pro working correctly once more.
Main thread with utilities to repair projects here: Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
Thanks,
Kevin

Similar Messages

Opening A Premiere Pro CS6 Project in Premiere Pro CS 5.5

I downloaded Premiere Pro CS 6. I already have Premiere Pro CS 5.5 on my computer. I had read you can open up a CS 6 Project in CS 5.5 by doing the following:
1) Saving your project file on your Hard Drive
2) Copy it just for back up
3) Right Click (Control Click) on the original Project File and open it up in Text Edit.
4) On the fourth row Change Version "25" to Version "24"
5) Save it.
I opened up Premiere Pro 5.5 and went to File (that I just changed to open in Premiere CS 5.5) - Open Project - and I then clicked on that file. It started to open up. When Premiere 5.5 was open this dialog box came up:
I clicked OK and everything opened up in 5.5 fine. It worked great. You can open up a CS6 project in Premiere 5.5.
What does this box mean? I installed CS 6 as is. I did not add any third party files or transitions or filters.
Thanks in Advance

this is the best piece of advice i have found. thankyou so much edwurd. I have premiere pro 5.5 and 6, I had to upgrade to 6 for some commercial work, but half my plugins have now gone into another dimension and 6 doesn;t see them these consist of red giant and new blue fx plugins mostly. These all work great in 5.5 premiere but of course with new projects now in 6 half of them cease to be seen by the plugin loader even though they are in the cache after 11 days of installing and reinstalling still no one can help. I had a huge project i was working layered with all these third party plugins that 6 didn't want to play with anymore, although it used to, I just tried your suggestion. and it worked perfectly, i didn't even get the error box the whole thing / 6 project / opened beautifully in 5.5 with all plugins functioning and happy. Thankyou again. you are a legend.

Corrupted Premiere Pro CS6 project

Hi, i´m having a problem opening a premiere pro cs6 project from another computer. My partner can open the project in her computer, but when she sends me the project by mail and i try to open it in my computer i I get t the mesasage " Cannot load project".
I´ve tried importing the project into another project but it doesn´t work.

Post a screen shot of the error message.

Can a premiere pro CS6 project done on a pc be opened by PPCC2014 on a mac without manually relinking every asset?

Can a premiere pro CS6 project done on a pc be opened by PP CC2014 on a mac without manually relinking every asset? Relinking would take longer for me than just recutting my colleague's footage.

Use the Project Manager to collect all of the assets on the PC. Then use that to start your editing on the Mac.

How to work on a portion of a larger Premiere Pro CS6 project on another computer?

I have a very large Adobe Premiere Pro CS6 project that I'm working on at home. While I'm gone for the holidays, I'd like to take a small portion of that project (whole project is 6tb and too large to take, so I'll take 1tb of it), work on it, and then return and reintergrate it into the larger project. Is there a way to do that?
Thanks,
Lucian

Mark,
I migrate Projects with external FW-800's all of the time. To ease working on those Projects, I locate all of my Scratch Disk, Same as Project, and everytihng is always there, and ready for use. I do give up a bit of ultimate performance with this configuration, but never have any issues.
One thing that I do for each external is to assign the same, unique drive letter to it in the OS of each computer. Have you done this? Does your RAID box come up with the same drive letter in each computer - always?
Good luck, and with migration between computers, you might want to relocate the Scratch Disks. Please let us know if that helps.
Hunt

I'm having trouble opening my premiere pro cs6, please help

I'm having trouble opening my premiere pro cs6, please help.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Premiere Pro CS6 - Project frame won't retain its layout or location between opening and closing?

I filed this as a bug, but perhaps I'm thinking through this wrong and would like to seek help.
I'm finding that the Project frame in Premiere Pro CS6 does not retain its layout between opening and closings.
Here's what I do:
1) Open a project.
2) Create several bins and populate them with media. Expand the contents of a bin by clicking the disclosure triangle to the left of the folder.
3) Undock the Project frame only.
4) Close the Project frame with Command-W
5) Use ****-1 to reopen the Project frame.
Repeat steps 4 and 5. The result is that the Project frame does not remember which bin was open. Furstratingly, it also does not retain which bins were expanded or collapsed.
And worst of all, it will also open in random areas of the screen. (The expected result is that it would reopen in the same spot of the desktop where you last closed it, no?)
I'm a big organizer -- tons of footage across many different bins. I open bins, close them, keep some open, close others... easily dozens or hundreds of times during an edit session. I'm beginnging to feel like I'm swatting flies or playing whack-a-mole just to get my bin views correct!
Or mm I approaching this wrong?

But really, the real solution for me was to not update Premiere Pro CS6 after a reinstall. The most recent updates just do not like my computer, I guess.
Figured I should post this solution here in case anyone in the future has this problem. (relevant: xkcd: Wisdom of the Ancients)
-Sam

Premiere Elements Project file wount open in Premiere Pro CS6

My friend Just bought Premiere elements 13 and created a Project. I cant open the Project in Premiere Pro CS6. Getting this error message:
"The Project appears to be damaged, it cannot be opened."
The Project workes fine in Premiere Elements 13
What can I do? What is wrong?

If you have done this:
Import a Premiere Elements project (Windows only)
   Select File > Open Project.
   Browse to an Adobe Premiere Elements project file, with file extension PREL.
   Click Open.
Premiere Pro converts the Premiere Elements project file to a Premiere Pro project file.
and it wont work Elements 13 is probably too new for CS6.

Premiere Pro CS6: Project Panel Search Disabled When Media is Not on System Drive

Hello
I'm new to Premiere Pro CS6. It's awesome!
I have some media I use in a project that is stored on another internal hard drive. This is a secondary 1TB drive.
I started to notice pretty quickly that the Project Panel search is disabled for assets residing on this secondary drive.
As a test I linked to some media on my Macintosh HD (root drive). The Project Panel Search was available during this test.
When not available, the Project Panel Search is dimmed. No errors or other feedback.
Is there something I can do to enable Project Panel search for media which is kept off my Macintosh HD? I would prefer to keep my work files on my secondary drive.
Hardware:
MacPro (Mid 2010)
Mac OS 10.7.5
24 GB RAM
1x2TB and 1x1TB hard drives
Thanks in advance.

Hello PHA 1 ,
I had the same problem, go down to the panel below the project panel and if it is on "effects" change it to "info" or vice versa.
Magicaly your search will not be greyed out and you can type in what your looking for.
I have no idea what one has to do with the other but that is the solution for now

Not able to open program Premiere Pro CS6 trial

Adobe Premiere Pro CS6 is not launching although software has been fully downloaded.
There is no icon on desktop to allow you to open the program with.
The program is located in the 'downloads folder'. Pls advise on how to open the program.

I Have th same problem ,
I Run the installation through Adobe Download Assistance on my hard drive c:
a directory created Adobe Premiere Pro CS6 , after this i run the install Set-up.exe , default installation directory was Program-Files / Adobe , i leave it as it was
after installation complete 100% , there IS NO ICON ON DESKTOP , NO FOLDER ON PROGRAM FILES / ADOBE
Is this a bug ? or this absolutely is A B U G ?

Which Premiere Pro (CS6) project settings should I be using?

Hi there
I am currently trying to use Premiere Pro CS6 to edit a Skype video call I recorded using Super Tintin, and I'm not sure what project settings I should l be using.
At the moment I am selecting HDV/HDV1080i25 (50i) when I set up the project, but when I come to add the video file to the project timeline, I am told that the file settings do not match the sequence settings and I am prompted to either change the settings, or keep the existing ones.
When I select 'keep existing settings' the video appears in a very small box in the centre of a large black screen, which obviously isn't what I'm looking for. When I select 'change sequence settings', however, the video fills the screen, which is great, but the video and audio are out of synch (when I play the file outside of CS6, they are in synch). Any idea what I'm doing wrong?
If it helps, here is some info regarding the file I'm currently working with:
MP4, 9MB
Frame width: 320
Frame height: 240
Frame rate: 14 frames/second
Data rate: 529 kbps
Any advice or guidance would be greatly appreciated! Many thanks.

Select a New Sequence
Select any preset in a folder Mobile & Devices
go to the Setting tab
Set the parameters of the video and audio to your video file appropriately.
Save the preset under any convenient name.
create a sequence based on your preset.
Enjoy.

Unable to Launch Adobe Premiere Pro CS6 using High-Performance on AMD Radeon Graphic Card

I have been unable to launch Adobe Premiere Pro since installing it with the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"
Here are my specs:
Lenovo Ideapad U400
Windows 7 (64bit)
Intel i5 2.5 ghz processor
AMD Radeon 6470M graphics card
The only occasion during which I have successfully launched Premiere Pro was after reverting to the default graphics card on my computer and uninstalling AMD Radeon, otherwise, I have tried to change Premiere Pro to run on High-Performance on Catalyst Control Center to no avail, I do not wish to revert to the Standard Graphics Card as it slows down my computers performance one hell of a lot, neither do I wish to have to constantly uninstall and reinstall my AMD Radeon Graphics Card when I use Premiere Pro. Thank you for your time.

Update:
- with Intel (R) HD Graphics Card disabled, Catalyst Control Center reports that no AMD Graphic card is installed
- using Device Manager under Control Panel, AMD Radeon 6470M was verified to be up-to-date
- Premiere Pro works so long as I disable the Intel card before launch, however, I re-enable it upon startup to get rid of the 800x600 resolution
- AMD Mobility Radeon Driver Verification Tool is unable to verify and update my driver, refers me to lenovo to update it.
- My graphics card is up-to-date as verified by lenovo
- Intel (R) HD Graphics Card now up-to-date
- Display currently mainly using Intel (R) HD Graphics Card (Possibly why it caps resolution at 1024x768 when disabled) I'm not sure how to switch the main Graphics Card used, Catalyst Control Center doesn't seem to have the option.
- when disabled, computer reverts to vgasave instead of Radeon
- Disabling Radeon does nothing to existing display
- After updating my Intel card, Catalyst Control Center reported CCC was not supported by the current display adapter
- CCC worked after rolling back Intel card
From what I infer, I believe the problem to root from my intel card being the main card used, if there is anyway to switch my radeon card to the default instead of the Intel card, do tell me, I believe this may solve the problem, I apologise for troubling you guys, and I'm starting to feel that I shouldn't be troubling Adobe with my problem with AMD, this discussion is probably really out of place but I hope it will help out others with a similar problem.

Premiere Pro CS6 Project Manager gives error & will not manage project - OS X Lion 10.7.5

Premiere CS6 project manager reports an error and will not manage my project. I have tried several times with both "Create New Trimmed Project" and " Collect Files and Copy to New Location". I have also tried to manage the project with options checked and unchecked (Include Preview Files, Include Audio Conform Files, Rename Media Files to Match Clip Names). Every time I try to manage the project, the process takes a few hours and then gives an error asking me to try again.
The project is 90 minutes long and uses multiple footage formats:
Sony FS100
Sony NEX7
Sony NEX-5n
Canon C300
Canon 5DmkII
Panazonic HVX200
My computer is:
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 12 GB 1333 MHz DDR3
Graphics ATI Radeon HD 5770 1024 MB
Software Mac OS X Lion 10.7.5 (11G63)
Is this a bug, or are there specific things I can do to troubleshoot the problem? I have read of issues with AVCHD. I have confirmed all of my AVCHD folders are intact. Any other Ideas?
THANKS!

I have this same problem on a Mac with CS6. I was simple trying to archive a project using the "collect files" option. After five or six hours of troubleshooting (Thanks Adobe) I have narrowed it down to MXF clips that came over in a Final Cut EDL (Projects created in PP with MXF files seem to be fine). In other words, as I was transitioning from FCP to Premiere Pro, I sent four or five projects out of FCP as an EDL, opened them in PP and continued to edit. It seemed to work really well until I attempted to archive my media. If there was a single raw MXF file in the timeline (Not the project panel for some reason) the Project Manager would give me the standard error:"An unknown error occurred during the Project Manager operation. Please save your project and retry the operation.".
I have found two solutions that seem to work, both of which are a pain in the ax.
Option 1: Save the original project file only to an archive folder. Then delete all the old timelines from the project, and save the project with a new name. Create a new timeline and just drag all the raw video and audio into it. (Project Manager needs a timeline of some sort to archive) Then use the Project Manager to archive the modified project. If I need the project in the future, I'll need to open the original PP project and relink all the media from the archived "media only" project folder.
Unbelievably, if you were to take this route and then re-edit the project in the future, it looks like you would run up against the same archiving issue AGAIN next time (At least using CS6). You'd have to go through all the steps above to archive it a second time. Depending on the size of your project, you may want to take option 2 and get the pain over with once-and-for-all.
Option 2: If you only have a couple of MXF files in the timeline (in my case I had mostly renders from AE by the time I was done and THAT raw project had archived in AE just fine) you can export the raw MXF files to another format, then replace the media in your project panel. Finally, use the Project Manager to archive the project like you should have been able to in the first place if Adobe had written the code well in the first place!

Large Premiere Pro CS6 Project running very slowly

Hi there folks. I'm about to ask a question to which I'm fairly certain the answer is "You need to upgrade your RAM and Video Card." But I thought I'd toss the question out to Adobeland just for the slightest, minesculest chance there might be a software fix.
Basically, I have a huge project for this promo. About 4TB worth of footage all in all. Almost all of it is PRORES 4444 from an Alexa (which runs like a charm) but there's also a great deal of full hd XDCAM transcodes of several of a networks full feature films (They're about 80GB each).
These films are killing my project. I can't even watch them for more than a few seconds without Premiere just stalling out, that's fine, I can cope with that. But apparently just having them in the project is enough to slow the whole thing down even when I'm only using a few clips on my 60" timeline. It takes 45 minutes for the project to fully load up, and I'm constantly clearing the cache.
I'm running a Mac Pro (Mid 2010) 2 x 2.4Ghz Quad-core Intel Xeon, 12 GB 1066 Mhz DDR3, ATI Radeon HD 5770 1024MB using OSX Lion 10.7.5....
If there's any little software tweaks or fixes that can speed up Premiere.
PS - I've tried using project manager to create a new trimmed project with handles, but for some reason this never works for me. It just makes copies of the entire original clips without trimming them. I've also tried transcoding the Larger files to smaller versions, but this process is taking way too long and keeps crashing
Any advice would be greatly appreciated.
Much Love
Martin

In After Effects you 'purge' the cache to free up RAM, in order to preview other compositions. In Premiere, it is a bit different, because this program works with different cache files and different ways of storing them. There are files used for previews/renders, created by the user - and files for caching information about media used in the project (metadata, waveforms etc.), created by Premiere. The only ones you can delete are the render files, found in Adobe Premiere Pro Preview Files (if you don't need them at one point; they can be easily recreated by rendering again). All the others (the ones you say that you delete through 'Preferences') need to be kept, because Premiere works with them. I assume this is the reason it takes that long when opening the project, because Premiere needs to re-cache everytime. Don't delete them and see how it goes.
Just as a reference point for you: I have a powerful computer (dual Xeon, dual nVidia, 64GB RAM), and I still have to decrease the playback quality sometimes to 1/2. The lowest I can go is 1/4, and I assume your Premiere allows decreasing at least to 1/8, with the rest of values grayed/unselectable.
I think you need a better graphic card first, one that is accepted by Premiere, for its CUDA capabilities. Check their website, I think your Radeon is not allowing the use of Mercury Playback.
Best,
Mark

Premiere Pro CS6 Project Files Not Recognised by Windows

Gidday, I hope someone can help with this problem. Premiere Pro(and After Effects) have worked perfectly on my laptop up until now. Saved PP projects are not recognised by Windows 7. I can open a new project but once I save it, it is not recognised and won't open and I can't reset either as the default programs for those files. The applications are visible in the start menu so it is very strange as all were working fine last week and nothing has been done to the laptop in the meantime.
Anyone else come up against this problem?
Thanks
Steve

Steve, I just had this happen as well.
I used the Programs section of the Windows Control Panel to initiate an uninstall. On Adobe's Unistall setup screen (or whatever it may be called) I selected to uninstall PP only. When it was done I restarted and then installed PP only. And then it was back to "normal."

Unable to open my Premiere Pro CS6 projects

Similar Messages

Maybe you are looking for