Unable to open Store after updating KB2919355

Hi
I updated the my Windows 8.1 Pro with KB2919355 (798MB)
on 25-Apr-2014 and after that I am unable to open Windows Store.
I tried to use the following methods
1.   (a) Register $Env:SystemRoot\WinStore\AppxManifest.XML
      (b) start "" "ms-windows-store:"
2. wsreset through Windows+R and also through Command Prompt (Admin)
3. Windows App Trouble-shooter
Each of the methods followed by restart.
Finally,
1. I am unable to open the Windows store
2.  Running the store hangs-up the system
Also tried the Microsoft's Live chat but could not get any solution.
Please suggest if there is any solution.

Hi,
Here is a related KB article below I suggest you refer to:
The Store app crashes after you upgrade to Windows 8.1
http://support.microsoft.com/kb/2892082/en-us
If this KB couldn't help you solve the issue, I suggest you troubleshoot this issue in Clean Boot mode.
More information for you:
Store not opening after upgrade from windows 8 pro to 8.1 pro.
http://social.technet.microsoft.com/Forums/windows/en-US/40091b49-4658-4432-ae5e-d01ce519eae4/store-not-opening-after-upgrade-from-windows-8-pro-to-81-pro?forum=w8itprogeneral
Windows 8 Store Won't Open
http://social.technet.microsoft.com/Forums/windows/en-US/68a680e7-3e3e-4af3-be97-147e5571812c/windows-8-store-wont-open?forum=w8itprogeneral
Best Regards,
Amy

Similar Messages

Unable to open itunes after update

unable to open itunes after update

I had a user with the same issue after updates and I was able to resolve.
I copied QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
I did so after uninstalling and re-installin, but I don't beleive that was necesssary. Thanks to user thurdy. This fix was from apple support for the error "iTunes stopped working". Figured I'd give a shot and it ended up working.
For reference the user was receiving the following errors exactly:
"the procedure entry point ?fastfree@***@@YAXPAX@Z could not be located in the dynamic link library JavaScriptCore.dll"
and
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error127)"

[Solved] Unable to open JPEGs after update

I ran an system update today, and I am now unable to open JPEGs. For example, nitrogen can set PNGs as the current wallpaper, but not JPEGs. In the terminal, the error:
(nitrogen:5408): glibmm-CRITICAL **:
unhandled exception (type Glib::Error) in signal handler:
domain: gdk-pixbuf-error-quark
code : 3
what : Couldn't recognize the image file format for file '/dc/media/wallpaper/background.jpg'
is given whenever I try to set a JPEG as wallpaper. Furthermore, mirage doesn't recognize JPEGs as existing.
During the update, libjpeg-turbo was installed, and I am wondering if this might have something to do with this.
Anyone have suggestions?
Last edited by hbweb500 (2011-03-06 06:59:03)

Could you please rebuild one of those programs which doesn't work anymore against libjpeg-turbo? In case that solves the problem, it would be very helpful for Allan to know. But in my opinion this is definitely something for the bugtracker!

Unable to open documents after Update to OSX 10.9

I have updated my iMac to OSX 10.9 (Mavericks)
This has resulted in a large number being unavailable for access.
I cannot open a number of from Pages, Numbers, Keynotes etc
Is there a quick shortcut, and a central place to adjust these
Beano

Do note that the updater saved the iWork '09 apps in a separate folder. Also, note that the new ones are crippled to match up with their iOS counterparts; i.e., dumbed down. See these for details:
http://www.betalogue.com/2013/10/24/pages-5-disaster/
https://discussions.apple.com/thread/5468056?start=0&tstart=0
http://9to5mac.com/2013/10/25/new-iwork-ilife-apps-go-for-simplicity-upset-power -users-all-over-again/#comments

Why doesnt itunes 11.1.3 wont open app store after updating to ios7?

why doesnt itunes 11.1.3 wont open app store after i updated my phone to ios7?

Hi karthikprabhakaran,
If you are having issues connecting to the iTunes Store after updating to iOS 7, you may find the following article helpful:
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
- Brenden

IPad 2 can't open App Store after updated to iOS 7, what should I do now?

iPad 2 can't open App Store after updated to iOS 7, what should I do now? I've been updates to iOS 7.0.4 but it still not working!

Same as you would do with any battery issue before you updated: restore the phone as NEW, not using backup at all.

TS3103 I'm unable to open mail after Securty Update 2012-004 (Snow Leopard)

I'm unable to open mail after Securty Update 2012-004 (Snow Leopard)

Please see
https://discussions.apple.com/thread/4311280?tstart=0

I can't open my apps store after updating to ios 6.... so frustrating...

i can't open my apps store after updating to ios 6.... so frustrating... i already tried setting the date and time but it didn't work.:( pls help...

Use iTune to update your apps.
Check for Updates (bottom right) in iTune. When download is completed, sync to iPad.
http://i1224.photobucket.com/albums/ee374/Diavonex/8afe4ddede4f4fabb4e819174239d df4.jpg

Unable to open Pages after new hard drive

I am unable to open pages after recently having to get my hard drive replaced. I have a time machine that I could get the application/files off of, but when I try to open it it comes up with the message:
"Check with the developer to make sure Pages works with this version of Mac OS X. You may need to re install the application. Be sure to install updates for the application and MAC OS X"
I have done all the software updates possible for both MAC OS and iworks compatibility, and nothing has worked. I do not have the original CD with me, so I cannot reinstall. Is there any other way to get the working version of the application off of my time machine?

(1)
Enter mac App Store and check if it state that Pages is installed on your machine.
If it does, you may download Pages 4.0.5 thru this channel for free.
(2)
Assuming that you aren't far from your original DVD for a long time, you may remove every files related to iWork '09 with my uninstall script
then
download and install the trial version,
don't run it
Trigger Software Update to download and install the required updater.
I apologize but I don't remember if the updater 9.0.5 apply the entire required changes.
After that you will have an up to date package which you will be able to use during 30 days.
When you will be back home, re-apply my uninstaller
install the package from your DVD
don't run the apps
Trigger Software Update to download and install the required updater.
After that you will have an up to date full time package.
To get my uninstaller,
go to my iDisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:uninstall iWork '09.zip
Yvan KOENIG (VALLAURIS, France) vendredi 29 avril 2011 22:42:02
Please :
Search for questions similar to your own before submitting them to the community

I can't access to my app store after update to IOS 7.

I can't access to my app store after update to IOS 7. It write that " Cannot connect to the App Store. You must connect to a wi-fi or mobile data network to access the app store". But, in fact, my mobile data is running well. Any solution?

Hi iwern,
Thanks for using Apple Support Communities. This article has steps you can take if you're unable to access the iTunes Store or App Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
- Ari

I am unable to open the latest update (10.4) iTunes not properly configured

when I attempt to open it says iTunes was not properly configured and then close - I can't reinstall 10.2 since 10.4 in installed; it won't repair because mid-way thorugh it pops up "itunesresources is not an accessible file... make sure you have access to this file" and stops the repair.
any thoughts?
I HAVE used 10.4 since upgrading - I shut down my computer; when I rebooted a few days later, this is what happened...

Hey there Mambo822,
It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Unable to open iphoto after ver 11 upgrade

Unable to open iphoto after ver 11 upgrade.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Why can't I connect to Itunes store, after updating my ipad to OS 6?

Why can't I connect to Itunes store, after updating mt Ipad to Os 6?

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Unable to open indesign after migration to new mac all other programs open and work.

Unable to open indesign after migration to new mac all other programs open and work. Why? Running Yosemite 10.10.1 Indesign CS5

The keyword is "migration." Migrating or copying files for Adobe applications usually does not work. Not all of the necessary subsidiary files are copied to the right location.
You'll need to first clean up the mess with this tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then download an installer from here:
Other downloads

Unable to open safari after OS X 10.10.1 (14B25) install

Hi I am unable to open safari after Yosemite Install. Keeps saying application unexpectedly quit. Please help. What can I do.
This is my log.
2014-12-21 12:28:53.436 AM storeaccountd[790]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7f981865a690> connection from pid 5257 with interface <AccountServiceInterface: 0x7f98186626d0> (PID 5257)
2014-12-21 12:28:53.494 AM com.apple.xpc.launchd[1]: (com.genieoinnovation.macextension.client[5262]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.genieoinnovation.macextension.client.mach
2014-12-21 12:28:53.494 AM com.apple.xpc.launchd[1]: (com.genieoinnovation.macextension.client[5262]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.genieoinnovation.macextension.client.runnow
2014-12-21 12:28:53.524 AM com.apple.xpc.launchd[1]: (com.apple.ReportCrash[5263]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash
2014-12-21 12:28:53.534 AM diagnosticd[4898]: error evaluating process info - pid: 5257, punique: 5257
2014-12-21 12:28:54.112 AM CoreServicesUIAgent[4885]: unexpected message <OS_xpc_error: <error: 0x7fff74444c60> { count = 1, contents =
    "XPCErrorDescription" => <string: 0x7fff74444f70> { length = 18, contents = "Connection invalid" }
}>
2014-12-21 12:28:54.114 AM com.apple.xpc.launchd[1]: (com.apple.WebKit.WebContent.E6AD49CE-0465-469F-87B1-03F344779200[5260]) Service exited with abnormal code: 1
2014-12-21 12:28:54.115 AM com.apple.xpc.launchd[1]: (com.apple.WebKit.Networking.F81FC96F-CA5B-4BB9-9FD6-8E6C50383904[5259]) Service exited with abnormal code: 1
2014-12-21 12:28:54.115 AM com.apple.xpc.launchd[1]: (com.apple.Safari.53708[5257]) Service exited due to signal: Segmentation fault: 11
2014-12-21 12:28:54.188 AM ReportCrash[5263]: Saved crash report for Safari[5257] version 8.0.2 (10600.2.5) to /Users/rasulkassam/Library/Logs/DiagnosticReports/Safari_2014-12-21-002854_Rasu l-Kassams-MacBook-Pro-2.crash
2014-12-21 12:28:54.326 AM Problem Reporter[5264]: Failed to connect (_imageWell) outlet from (ProblemReportWindowController) to (NSImageView): missing setter or instance variable
2014-12-21 12:28:54.576 AM system_profiler[5266]: platformPluginDictionary: Can't get X86PlatformPlugin, return value 0
2014-12-21 12:28:54.577 AM system_profiler[5266]: platformPluginDictionary: Can't get X86PlatformPlugin, return value 0

Genieo adware is installed without your knowledge. You have to remove it.
From the report:
2014-12-21 12:28:53.494 AM com.apple.xpc.launchd[1]: (com.genieoinnovation.macextension.client[5262]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.genieoinnovation.macextension.client.mach
2014-12-21 12:28:53.494 AM com.apple.xpc.launchd[1]: (com.genieoinnovation.macextension.client[5262]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.genieoinnovation.macextension.client.runnow
If you have another browser:
     Use free AdwareMedic by clicking “Download ” from here
     http://www.adwaremedic.com/index.php
     Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
     Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
    “Quit AdwareMedic”.
               or
If you don’t have another browser:
     Remove adware manually by following the “HowTo” from Apple.
    “Remove Genieo, also known as InstallMac”
    http://support.apple.com/en-us/HT203987
      Safari > Preferences > Extensions
    Turn those off and relaunch Safari again.
    Turn those on one by one and test.

Unable to open Store after updating KB2919355

Similar Messages

Maybe you are looking for