Unable to open WAD (web application designer) in BW 3.5!

Hi,
when i open WAD through menu path (start->programs
->Business explorer->Web application designer), i am getting the following error!
WADConst
Please log on to a Netweaver BI 7.x system. System J2E does not have the minimum version required 70005.
I just can`t understand from where i got this BI 7.x system, when my system is BW 3.5 (NW04 platform).
can any one expalin me what is this problem? and suggest me to over come this problem?
Thanks,
Ravi

Hi Ravi!
I assume that you installed the SAP GUI 6.40 with BI Addin (which contains the BI Frontend for SAP NetWeaver 2004s BI).
In this case, you have a sub folder underneath "Business Explorer" in your startmenu named "Business Explorer (SAP BW 3.x)".
You have to use this version of the BEx Web Application Designer.
If this is not the case, please create a Support Message with all detailed information (backend and frontend versions).
Thank you,
Tobias

Similar Messages

Unable to open WAD (Web Application Designer) SAP BW 3.x

Hi experts
In my computer I don´t open WAD (SAP BW 3.x)
i make click start-> programs -> Business Explorer-> Business Explorer(SAP BW 3.x)-> Web Application Designer(SAP BW 3.x)
appears following error:
This application requires Internet Explorer 5 or higher
but I have installed the Internet Explorer 8 version
then I do not understand because can´t run the WAD 3.x
Can anyone help me? please
Thanks

Hi ashutosh
the following information of SAP GUI:
Component: SAPLogon for Windows
Release: Final Release 720
Fichero: saplogon.exe
vers.Fichero: 7100.4.17.1045
Build: 1147943
Patch Level: 17
whether if it is which version of WAD but I am interested in running and to open the Web Application Designer in any of the versions: 3.x or 7.0, but the important is that can be work with some WAD model because in version Web Application Designer 7.0 is enable pero when i search some WAD model (I know that it exists in the system) The system search says it does not exist or no found.
I can't try uninstalling because I'm not a support person so I have not authorization, I'm a consultant and only want to work with WAD models

Unable to open WAD (Web Application Designer) 3.x

Hi experts
In my computer I don´t open WAD (SAP BW 3.x)
i make click start-> programs -> Business Explorer-> Business Explorer(SAP BW 3.x)-> Web Application Designer(SAP BW 3.x)
appears following error:
This application requires Internet Explorer 5 or higher
but I have installed the Internet Explorer 8 version
then I do not understand because can´t run the WAD 3.x
Can anyone help me? please
Thanks

HI,
Please run the installation check as per note 1229206 and attach the result to the message.This is typically a front end installation issue May be dhtmled.ocx is not registered on this PC This is a typical front end issue where you have to look at your GUI patch and front end patch.I recommend you deinstalling your frontend installation as follows:
- Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -
   'REMOVE SAP FRONTEND'
- Install the newest frontend and GUI patch and check the installation
   again with sapbexc.xla
Please run the front-end checktool SAPBEXC.XLA as per Note 197460 and
ensure there are no errors.
Please refer to following Notes for GUI patch and front end patch:
578944     Expected release dates for SAP GUI for Windows
558994     General information on BW front-end patches
535308     How to apply a SAP Front End patch?
96885      Downloading frontend patches
You can download the latest patches from the following url,
Goto URL: http://www.service.sap.com/swdc
SAP Software Distribution Center -> Download -> Support Packages and
Patches -> Browse our Download Catalog -> SAP Frontend Components ->
SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 7.20 CORE -> win32 ->
patch 9.
Also you can download the latest BI addon and BW addon from the
following url,
Please goto
-> service.sap.com/patches
-> entry by application group
-> SAP Frontend Components
For BI add-on,                          For BW add-on,
     -> BI ADDON FOR SAP GUI 7.20       -> BI ADDON FOR SAP GUI 7.20
     -> BI 7.0 ADDON FOR SAP GUI 7.20   -> BW 3.5 addon for GUI 7.20
     -> BI 7.0 ADDON FOR SAP GUI 7.20   -> BW 3.5 addon for GUI 7.20
     -> Win32                           -> Win32
     -> Apply the latest frontend       -> Apply the latest frontend
        patch 500                         patch 8
Please install the GUI and Business Explorer patches in this sequence:
1. SAP GUI
2. BI 7.0 ADDON FOR SAP GUI 7.20
3. BW 3.5 add for GUI 7.20
https://service.sap.com/swdc
Installations and Upgrades
    Browse our Download Catalog
      SAP Frontend Components
         SAP GUI FOR WINDOWS
            SAP GUI FOR WINDOWS 7.20 CORE
              Installation
       50105790_4 NW 7.0 Presentation - 7.20 Compilation 3 Present.1/2
Regards,
Naveen.

Could not open WAD (web application designer) in BW 3.5!

Hi,
i am unable to publish my query in web.
when i click the option 'publish query in web' i cud not open that query.
it is throwing the following error!
<b>The termination occurred in system J2E with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .</b>
can u guide me what could be the problem?
Thanks,
Ravi

looks like you have installed, BW frontend addon for WAS7.0
Regards
Raja

What is WAD(Web Application Design)?

hi all,
<b>What is WAD(Web Application Design)?</b>
any help our document related to the topic is welcome.
any help will be highly Appretiated...
thanks and regards
vinit soni

Hi Vinit,
WAD is a tool for creating web reports and for displaying reports in browser
See the links in the thread
WAD Material
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Have a look at these links
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/47/d4fed1c60a9743ade3b4cf306d5d48/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/40/8b174082fe1961e10000000a155106/content.htm
Thanks & Regards,
Suvarna Chittoor.
Award points if helpful

Query on WAD (Web Application Designer)

We have got request from the user on one WAD u2013 Web Application Designer Report for the extra functionality.
This WAD report contains 7 tabs, for each tab there is a separate query view has bee designed with default variable values.
While running the WAD report user will input values in the variable window for the variables (Eg: Fiscal Year, Org.Structureu2026etc), after executing the report, if the user switch to another tab in the same report, the variable values entered before execution of the report will not pass to the another tab by default because the query views have been designed in such a way that each query view will have its own default values.
Now the user is expecting the variable values entered for the first tab should be passed to other tabs as well, is it possible to pass values from one tab to another tab?
If its possible, could you guide us where (HTML code or web template parameters or any another things) exactly the required changes/modifications need to be made in WAD report?
Thanks in advance.

hi vishal ,
You are right .At first i did not get you solution
but later i treid some random seletion propeties for the text web item.
I got it.
Steps:
1. Place the text element in the right panel of wad.
2. Go to properties of test element.we have two in this 1.General 2.specific.
3. In specific we have the Display General Text Elements.Checkthis Check box
4.save.
Now you can see the ouptput.
But not only last loaded date but also other details like
Last change by,created by,..refreshed date..etc

Freeze a Column in WAD (Web Application Designer)

Hi,
I have a web template in WAD that has an analysis_item, which data provider (DP1). The data provider (DP1) has a query attached to it.
My goal is to be able to freeze a column (data column) in the analysis_item.
I looked at all the properties of the analysis_item, but I didn't find any properties that I can use to freeze a column. I saw another discussion thread on Freezing column and rows, but there wasn't an answer for it in that thread.
I even tried to search for a way to freeze a column using JavaScript , and I found the link below using CSS (cascading style sheet) to accomplish the freezing of a column for a non SAP web application. However, I was not able to figure out how to apply this method in WAD and specifically in the analysis_item.
http://web.tampabay.rr.com/bmerkey/examples/locked-column-csv.html
Do you know any method to freeze a column when displaying data via the analysis_item?
I would really appreciate any suggestion you have.
Thank you,
Katelyn

Dear Katelyn Dang ,
Freeze column
On the properties tab select table. goto web item tab. in number of data columns displayed put value as 4. (you can change as per ur need).
Also go through thes links
http://web.tampabay.rr.com/bmerkey/examples/locked-column.css.html
http://web.tampabay.rr.com/bmerkey/examples/locked-column-csv.html
For visiblity
you can set visible rows and columns in the specific properties of web item table! Just click the table in the Web Application Designer and than look into the specific properties. Select "Number of Data Rows..." or "Number of Data Columns..." as you wish!
Hope it helps
Regards
Bala

Urgent help on WAD(web application designer

Hello can any one provde documentation on BEX WEB APPLICATION DESIGNER.
NAg

Hello Nag,
Have a look at these links
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/47/d4fed1c60a9743ade3b4cf306d5d48/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/40/8b174082fe1961e10000000a155106/content.htm
Hope it helps.
Regards,
Mohan

I get 'SAP BEx web Application designer has stopped workin' when click WAD

Hi,
When I click on WAD(Web Application Designer option from Business Explorer menu),
I get "SAP BEx web Application designer has stopped working".
I am running VISTA.
Any hints on how to deal with this problem?
Thanks

Hi,
I uninstalled and installed again the GUI and Bex Explorer
I installed again SetUpAll.exe and selected:
--SAP GUI for Windows 7.10 (Compilations3)
--BW 3.50 Add-On for SAP GUI 7.10
--Business Explorer
On completion, I had two options for WAD:
--Web Application Designer (SAP BW 3.x)
--Web Application Designer
When I point my mouse on "Web Application Designer " for selection, there is a message that
"Business Explorer Web Application Designer - Can only be used in SAP NetWeaver 7.1"
and when I go ahead to click on it, I get the error message I reported in my initial post
If I select Web Application Designer (SAP BW 3.x), it takes me in alright but the view is a bit different, in that in the New template of the Web Application, on the right pane, I do not see the icon for DataProvider which used to be there when I used to work in "Web Application Designer" instead of "Web Application Designer (SAP BW 3.x)"
Any hints?
Thanks

Variable in Web application designer

I created a template in WAD (Web Application Designer) and inserted table which is connected to Query. Given Query consists variable also. However WAD generating report without any variables.
Also, if anybody has stepwise document for WAD.
Regards,

Hi,
1. Check if your variable is input-ready (if it's not - it shouldn't appear on variable screen). If yes - pls.follow
2. Try to set parameter Reset variable values - On (WAD-> your Template --> Web template parameters --> Behavior)
3. General info on WAD can be found here http://help.sap.com/saphelp_nw70/helpdata/EN/1a/456a3badc1b315e10000000a114084/frameset.htm
Hope this helps

Insert a BSP Application in Web Application designer template (WAD)

Hello to all
I like to place a BSP Application in my Web Application designer template (WAD). Have someone a good idea how to display a BSP in a web item.
We use BW 7.0 .
Thanks a lot for any good idea.
Christian
Edited by: Christian Baumann on Nov 10, 2010 3:46 PM

Christian,
There are many ways you can do this ...
1. In Portal - you can have two iviews for the same and run both of them together ( there was something called client side eventing or something like that before - I am not sure if it still exists
2. In WAD - use frames - use one frame for the WAD template and the other for the BSP ( I have never tried it in WAD 7.0 but it works in 3.x where you can introduce frames
3. Possibly have the BSP as a link in the template so that it opens up separately ..?
4. Instead of embedding the BSP into your WAD - embed your WAD into the BSP ..? this is also possible since the output of the template is HTML - but then you will have a hard time getting the context menu , export to excel etc which are all taken for granted in WAD.

New to wad?can u tell me how web application designer works?

new to wad?can u tell me how web application designer works?

Hi,
It is very simple :
1) Create the query on a datatarget in teh query designer.
2) Open the WAD ,select new webtemplate .
3) Drag and drop required Web items
4) Specify the Quaey(created in step 1) as the Data provider for all selected web items (in step 3).
For detail explanation refer:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b26a3b74a4fc31e10000000a114084/frameset.htm
With rgds,
Anil Kumar Sharma .P

Opening template issue in Web Application Designer (Loading problem)

Hi,
When i open a query in Web Application Designer through the BWdev, it is opening but when i open a query in Web Application Designer through the BWProduction it is not opening, it is displaying a msg box like this
" Operation Failed! NO detailed error information from backend available ".
In the opening of the webtemplate itself it is showing that box when loading mime type imgs.
If anybody knows pls send msg.
Thanks & Regds,
Giri.

Hi Giri,
I have a similar problem ...
when I give the user SAP_ALL security profile,
the problem is gone,
but I DON'T want to do that...
can you please specify how to give full authentication access to WAD only
thanks a million!
Edwin

Working with WEB APPLICATION DESIGNER ( WAD)

Hi all ,
Could anyone pl suggest me some books or some URL's for me for mastering in WAD. I am new to this.Bail me out of this situation .
Thx in Advance ,
Badarinarayan.H.

Hi Badri,
WAD:
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/47/d4fed1c60a9743ade3b4cf306d5d48/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/40/8b174082fe1961e10000000a155106/content.htm
http://service.sap.com/bi -> SAP BW InfoIndex -> Web Application Design (3.x)
have a look on this thread posted, it speaks about front end problems in WAD:/thread/101416 [original link is broken]
To know about hyperlinking in WAD:
'how to enchance web context menu'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3541a990-0201-0010-f1ae-b24b72690df7
'how to table interface'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/49dfeb90-0201-0010-a1a2-9d7a7ca1a238
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f0aca990-0201-0010-0380-f3aac4127a57
and on how to use JAVA in WAD:
WAD and JAVA
web reference bw 3.5
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b1089290-0201-0010-288c-98e4d26487ee
Regards,
R.Ravi

Web Application Designer (SAP BW 3.x) is not openning

Hi all,
When I am opening Web Application Designer once the screen is opened it is disappearing. My GUI is on win2003 thinclient technology. is any additional patches required?
please hele me...
Kariyath

Hi Kariyath,
can you provide us the exact Release and Patchlever of the GUI you use?
Regards
Gregor

Unable to open WAD (web application designer) in BW 3.5!

Similar Messages

Maybe you are looking for