Unable to overwrite report saved on the server?

Hi.
Am running into an interesting problem with a SQL Server 2012 Reporting Services instance that I'm running. For reference it's Reporting Services 2012 on a Windows Server 2012 R2 box, but the ReportServer and TempDB's are being hosted on a Windows Server
2008 R2 server running SQL Server 2008 R2.
Basically everything works, as it should - with the exception of saving reports in Report Builder, that already exist on the server (so overwriting them).
So I can open any report, work on it, and save it as a new name and it saves fine. If I then attempt to save that report with the same name as any other report, the ReportBuilder window freezes for 120 seconds before throwing the following error:
Failed to save report 'https://myreportserver......'
An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.
---> Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. --->
System.Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors
The strange thing is, I'm pretty sure it's none of these problems. Neither the Reporting Services or the SQL Server where the databases are kept are having any performance problems of any kind, and there's no unusual load on the servers at the time I attempt
to save the file. I can't find any other error logs on either server to indicate there's an issue. Most interestingly is that whilst waiting for this error to occur I can see on the SQL Server that the database (or at least a number of tables) become locked
and for the entire 120 seconds the report server becomes unusable as every other task ends up queued until the timeout happens.
It doesn't seem to be a permissions problem from what I can see either on Reporting Services, or within the database as I can see that the service account used to access the databases has the correct 'RSExecRole' permission on all the right databases, and
dbo on the ReportServer and ReportServerTempDB databases.
I'm a little stumped. Have Googled (um, sorry, Binged) this problem for hours and can't find a similar problem. Anybody seen this before? Thanks.

Well seems like this was a bug that was fixed in SQL 2012 Service Pack 2! I've just applied it to the system in question, and it works as it should now.
At least this information is up here for others who may encounter it now!

Similar Messages

How/Where are Financial Reports Saved on the File System of the Server?

We've recently lost a large chunk of our reports on our server. We can't figure out which directory location to restore in order to get those reports back. Where is the default directory for 11.1.2.2 Financial Reports? And in what format are those reports saved?

The FR reports themselves are found in the Operating System (O/S) file system, but the EPM Workspace heirarchy (folders, tree, etc) are stored in the Hyperion BI+ repository database.
On the O/S file system, the reports are stored in RM1 folder under "C:\oracle\Middleware\user_projects\epmsystem1\ReportingAnalysis\data\RM1\root" folder.
The names of the reports located here are UUID (long identifiers - not the actual names).
For example:
        when a report is created with the name"My report" in the Financial Reporting Studio, when logging into EPM Workspace it will be accessible within Financial Reports/folder name where it was saved.
        the actual report will be stored in a sub-folder of the RM1\root folder on file system.
            The name of the file will be a unique identifier (not the actual name of the report i.e. "My report")
            It will be generated "on the fly" based on various things such as the current date and time on the server (i.e 0000012f5af72b1a-0000-ec71-c0a8006c.00000130510b77bb-0000-5133-c0a8006c.1)
The meta-data for that report ("My report", that is in the folder in Workspace, the modification date of the report, the permissions on that report, etc.) will be stored in the Hyperion BI+ DB as an object in an encrypted table. Financial Reporting knows what meta-data is in the Hyperion BI+ DB that matches the report, in the "RM1\root" folder because all the rows in the table for this object in the Hyperion BI+ DB that are related to "My report" will be referenced using the UUID of the file (e.g. 0000012f5af72b1a-0000-ec71-c0a8006c.00000130510b77bb-0000-5133-c0a8006c.1)
Note: The location of RM1 folder differs with each installations' operating system.

The data could not be saved because the server could not be contacted - Error

Hello, I'm a beginner in ligthswitch, so, I made a couple of screens and I made the database and attach to the application but when i want to save the new records shows me this error:
The data could not be saved because the server could not be contacted. Please check your network connection and try saving again.
The operation has timed out.
I verify the database, the record is saved but the application show me the error.
Please help me I have to deliver this screens today.
Thanks!
Boanerges. Mr 3: 17

Hi Elmer,
I researched this error message, I think you can try the methods below:
Increase the timeout of the connection between the client and the server
Increase Client timeout, and it is set in the Application class in the Client Project
For further information: Error message: Unable to save data

Desinger Workflow 2010: Unable to load workflow actions from the server. Please contact your server administrator?

Hello,
I am facing a problem from last some days..
When I am trying to open/create/update workflows from Designer 2010, then designer giving me an error "Unable to load workflow actions from the server. Please contact your server administrator".
I researched on internet for this error and found some possible reason like
Login user Permission issue
Error in custom actions
So that I checked for permission for login user, but it has administrator rights. and I tried to open workflow by removing custom activity code, but still exist.
also if I tried to create/update workflow for another site on same server then it works without any problem.
Can anybody please help me?
Many thanks,
Nitin
N i T i N

Hi NiTiN4u,
Thanks for your post.
First, here are some troubleshoot workflow error form Microsoft site:
http://office.microsoft.com/en-gb/sharepoint-designer-help/troubleshoot-workflow-errors-HA010237912.aspx#BM20
Second, have you tried to close the site and open it again in SharePoint Designer 2010?
Third, try to restart your IIS and share the results.
SharePoint 2010

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

Mac mini Server 10.6 unable to search for files on the server from desktop.

I'm running Mac mini Server 10.6 with 15 various Apple Mac desktops 10.4 / 10.6. The problem i'm having is that i'm unable to search for files on the server from any of the desktops. I have fixed permissions and rebooted. I can perfomr a search though command - F and spotlight from the server.
Anyone have any ideas?

I have a Mac mini server with Mac osx 10.6.8 installed --- I have a website {UNDER CONSTRUCTION} installed on it with a REGISTERED DOMAIN NAME belizeansworldwide.com -->[DNS service w/GoDaddy] & DSL INTERNET service w/VERIZON --- {My server is the ONLY DEVICE CONNECTED to my VERIZON DSL router/modem}
When I enter my DOMAIN NAME or WAN IP # in my browser(s)--> Chrome OR Safari -- i get my Verizon modem
set-up page-->{this incl the WAN IP# as I expected}----{NORMALLY I WOULD ACCESS MY Actiontec
modem/router via 192.168.1.1} --- While in that webpage there's an option "shared files/folders" & clicking on that option DISPLAYS MY WEBSITE ---> {"PORT FORWARDING DID NOT RESOLVE THAT"}
My next attempt @ a solution was through my Server's SystemPreference>Sharing>Internet Sharing
& this the Original Object of my post ===> "MY SHARING PANEL DOES NOT INCLUDE THE OPTION
FOR 'Internet Sharing' among the others like CD DVD, Remote Login,Remote Management, Bluetooth Sharing, etc.etc ---- Hope this additional info will help to clarify &/or explain my problem
Thanks, & best regards to you & yours

Viewing HTML page saved on the server from the browser

Hi all
In my application i am having some HTML pages saved on the server. I had given an option to the user to view the HTML page from my application. behind the scene what i am doing is that the view request will get handled by a servlet and from that servlet iam locating the HTML page on the server directory and sending the HTML page to browser by using the Servlet OutputStream. The HTML page is shown on the browser but the attached images are not shown. The images are also there in the server directory and are refered in the HTML file correctly. When i directly open the HTML file then the images are shown correctly.
Can anyone suggest wat's wrong there.
The code i m using is
ServletOutputStream out=response.getOutputStream();
                    if(format.equalsIgnoreCase("pdf"))
                         logger.info("Seleted format is pdf..\n");
                         response.setContentType("application/pdf");
                    else
                         logger.info("Seleted format is html..\n");
                         response.setContentType("text/html");
String file = ReportingConstants.URL_GENERATEDREPORTS+reportPath+itemName;
// file : HTML file absolute path as string.
                    URL url=new URL(file);
                    BufferedInputStream bis=new BufferedInputStream(url.openStream());
                    BufferedOutputStream bos=new BufferedOutputStream(out);
                    byte[] buff = new byte[2048];
                    int bytesRead;
                    while(-1 != (bytesRead = bis.read(buff, 0, buff.length))) {
                         bos.write(buff, 0, bytesRead);
                         bos.flush();
                    }

You have to undertsand how the browser handles images and other resources in a HTML page. In the HTML there is an image tag that has a url to an image which can be a reletive url or an absolute url (starts with a "/").
If the url is a relative url the browser interprets the url as being relative to the url currently displayed in the address field discarding the last element of the url . So if the url in the address bar is http://www.myserver.com/myapp/mypage.html and the relative url is images/myimage.jpg, the browser will submit a request to the server for http://www.myserver.com/myapp/images/myimage.jpg
Now let's say that you are call mypage.html from a servlet that has the url http://www.myserver.com/myapp/servlets/myservlet. Then when the browser tries to retrieve myimage.jpg it will use the url http://www.myserver.com/myapp/servlets/myservlet/images/myimage.jpg and since this is incorrect it will not be able to display the images.
One solution to this is to change all of the image urls to absolute urls. That is the start with a slash where the slash represents the start of the url after the application domain name. For example you used an absolute url for myimage.jpg it would look like /images.myimage.jpg and when accessing the page through the servlet url (http://www.myserver.com/myapp/servlets/myservlet) the browser will discard everything after http://www.myserver.com/myapp and look for the image at http://www.myserver.com/myapp/images/myimage.jpg which is the correct url.
A second solution is to use the HTML BASE tag which tells the browser not to interpret the image tag urls (and other resourses) using the current url in the address bar but to use the url supplied in the HTML BASE tag. The browser will still perform the same process for relative urls but now relative to the BASE tag url. Since the BASE tag url will be the same every time the page is accesssed the images should be correctly accessed no matter how the page is accessed (eg directly, using RequestDistpatcher or via your servlet)

Data types, msg types, where these data saved in the server?

In XI we are creating the data types, msg types, ...... where these data saved in the server ?

Enter CL_SRAPI* in the SE24 transactions and make your search as shown below.
CL_SRAPI_DATA_TYPE----
data type
CL_SRAPI_DATA_TYPE_ENH----
data type enhancement
CL_SRAPI_FAULT_MESSAEG_TYPE-----fault message type
CL_SRAPI_MESSAGE_TYPE----
message type
CL_SRAPI_INTEGRATION_SCENARIO----integration scenario
Communication channels are saved in the SMPREL3 database table.

LS Getting the error "The data could not be saved because the server could not be contacted" when deploying on my local desktop

Hi:
I have a very simple test LS App:
1 Table "Person" with 1 property "Name"
One totally standard Editable Grid
So no complicated calculations that could timed out...
When I hit F5 the screen launches and shows the data, but when I try to create a new Person it waits for about 2 minutes and then the following error appears:
The data could not be saved because the server could not be contacted. Please check your network connection and try saving again. The Operation timed out.
Despite the error the data gets persisted on the database.
I am on VS 2013 Pro Update 4 and SQL Server LocalDB 2012 (v11.0).

If you decide to try again I would:
1) Uninstall Visual Studio
2) Uninstall SQL Server (all versions)
3) Re-install SQL Server
4) Re-Install Visual Studio
Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
http://LightSwitchHelpWebsite.com

Unable to stop browser streaming to the server

Hi All,
I am having a problem when using apache fileupload framwork. However I don't think it has to do with this framwork. It's more general upload issue.
When I upload a file I do the check for its size. I am streaming the request from the browser. If the file gets to large I stop the streaming by closing the streams including the ServletInputStream. Still the browser streams to the server. While my response is ready to be returned to the browser. And is returned when the stream is ready. I think you need to stop the SocketInputStream somehow. I am trying to find out on how to do this. Any suggestions are welcome.
By the way if close the browser early I get java.net.SocketException: Connection reset
I am using Websphere Portal. But any example with other server in portlet or non portlet context are okay too.
Does anyone know a solution to stop the portal from reading the request? In other words stopping the browser from streaming to the server?

Is there any missing features in your server, see here for mitigation-
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/11edc5d4-c362-4293-86d0-22be5130d448/unable-to-load-workflow-actions-from-server-please-contact-your-server?forum=sharepointcustomizationlegacy
http://blogs.technet.com/b/rajbugga/archive/2013/04/12/unable-to-load-workflow-actions-from-the-server-please-contact-your-server-administrator.aspx
http://sharepoint.stackexchange.com/questions/34405/sharepoint-designer-2010-unable-to-load-workflow-actions-from-the-server
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c2f6e646-c753-4bca-baaa-c5da2a05546e/unable-to-load-workflow-actions-from-the-server-in-sharepoint-designer-2010?forum=sharepointcustomizationprevious
http://www.sharepointed.com/2011/08/16/unable-to-load-workflow-actions-from-the-server/
http://sharepointconnoisseur.blogspot.com/2013/06/tips-to-resolve-error-unable-to-load.html
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

I deleted a message from iCloud mail. It says it is saved on the server for 1 month. Can I get to it?

I deleted a message from my iCloud mail (and emptied the trash) on my MAC that I didn't mean to. In my iCloud IMAP settings it says that deleted mail will be saved on the server for 1 month. How do I get to it?

Go to http://www.icloud.com and go to the Mail page there. Open the Trash mailbox. If the message is there you can move it out. If it isn't, then I'm afraid it's gone. The 'delete after x days' setting in the Mail application is over-ridden by the automatic deletion in the iCloud server - I have an idea that's 7 days but I'm not sure.

Unable to start EBS DB after the Server Crash. Error in installing the Required RPM.

Hi , Hussein ( As most of the Time It is Only you here who comes to the rescue or give Usefull inputs. I am sorry if i mistaken, no Pan intended for Other Experts)
I 've also posted this issue here but got no response. https://forums.oracle.com/thread/2590497
Badly require your inputs and suggestions on the Following Issue. , Really Appreciate the suggestions.
I need to Install the sabayon-apply rpm which could fix the issue after the Server Crash but unable to install it.
   Please see the Brief of the Issue.
I got stuck up in installing the rpm after the server(Red Hat Enterprise Linux Server release 6.0 (Santiago) x86_64 GNU/Linux) got
crashed Eventhough I am able to start it in Xwindows but not able to run or start EBS database along with many other programmes. Also The
VirtualBox machine installed on it 've No issue, they work fine But the host OS is not fine. as there are lots of
errors in .xsession-errors. which i 've pasted below. And Unable to Install the sabayon-apply rpm that could have fix the Issue.
I would highly Appreciate if anyone could drop few hints and suggestions on this Issue as this is really Urgently Important for me.
Please see the following Brief of the Issue.
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
While installing the rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps as it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
    After That I could Not Install any rpm with yum or rpm command as getting the Same Errors.
while trying to install individual rpm am getting the followig Errors
[root@ebs Packages]# rpm -ivh libX11*
error: libX11-1.3-2.el6.i686.rpm: Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
error: libX11-1.3-2.el6.i686.rpm cannot be installed
[root@ebs Packages]# rpm --checksig gtk2*
gtk2-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-docs-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-engines-2.18.4-5.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-engines-2.18.4-5.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-immodule-xim-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
For that I tried to import the RPM GPG Key But still faced the same errors
[root@ebs yum.repos.d]# wget http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 -O /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle Key fingerprint = 4214 4123 FECF
C55B 9086 313D 72F9 7B74 EC55 1F03
--2013-10-08 00:04:56-- http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
Resolving public-yum.oracle.com... 202.159.216.177, 202.159.216.171
Connecting to public-yum.oracle.com|202.159.216.177|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1011 [text/plain]
Saving to: “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
FINISHED --2013-10-08 00:05:06--
Downloaded: 6 files, 55K in 2.0s (27.7 KB/s)
100%[===========================================================================================================================================================>]
1,011 --.-K/s   in 0s
2013-10-08 00:04:56 (155 MB/s) - “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
saved [1011/1011]
   Than i run this command
[root@ebs yum.repos.d]# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle ----it Returns with no output
[root@ebs yum.repos.d]#
[root@ebs log]# rpm -q gpg-pubkey-ec551f03-4c2d256a
gpg-pubkey-ec551f03-4c2d256a
But still I can't install the rpms, got the same Errors. please see the following
[root@ebs yum.repos.d]# yum install firefox*
Loaded plugins: refresh-packagekit, rhnplugin
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Downloading Packages:
(1/2): firefox-17.0.9-1.0.1.el6_4.x86_64.rpm
| 25 MB     03:42
(2/2): xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
| 14 MB     02:03
Total
117 kB/s | 39 MB     05:46
error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD
Problem opening package xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
[root@ebs log]# rpm -qf `which gpg`
error: rpmdbNextIterator: skipping h#     455 Header V3 RSA/SHA256
Signature, key ID fd431d51: BAD
[root@ebs log]# gpg --list-keys
/root/.gnupg/pubring.gpg
pub 1024D/11F63C51 2002-02-28
uid Jamie Cameron <[email protected]>
sub 1024g/1B24BE83 2002-02-28
pub 2048D/671DF296 2013-10-08
uid oracle
sub 2048g/9FE459CE 2013-10-08
pub 1024R/F3A5AC78 2013-10-08
uid oracle (no comment) <[email protected]>
sub 1024R/6DC65985 2013-10-08
pub 1024R/78F6C944 2013-10-08
uid root user (Example GPG Key Signature For RPM
Packages) <[email protected]>
sub 1024R/77C97AFF 2013-10-08
[root@ebs log]# rpm -qi 'gpg-pubkey-*'
Name : gpg-pubkey Relocations: (not relocatable)
Version : ec551f03 Vendor: (none)
Release : 4c2d256a Build Date: Wed 09 Oct
2013 01:09:10 AM IST
Install Date: Wed 09 Oct 2013 01:09:10 AM IST      Build Host: localhost
Group : Public Keys Source RPM: (none)
Size : 0 License: pubkey
Signature : (none)
Summary : gpg(Oracle OSS group (Open Source Software group)
<[email protected]>)
Description :
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: rpm-4.8.0 (NSS-3)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=M8XY
-----END PGP PUBLIC KEY BLOCK-----
I 've tried to remove the existing keys But Not able to remove them as well.
Is this the right way of removing the keys ?
rpm -e --allmatches 'gpg-pubkey-ec551f03-*' the ec551f03 is the
version of rpm -qi 'gpg-pubkey-*' query... Please correct
Could you tell what I am missing here that's causing the Issue.
Following are the Errors that is observed in .xsession-errors log file
===== BEGIN RING BUFFER (/usr/sbin/sabayon-apply) =====
MainThread 2013/10/08 18:34:23.3001 (sabayon-apply): No profile for
user 'root' found
MainThread 2013/10/08 18:34:23.3005 (sabayon-apply): Fatal exception!
Exiting abnormally.
MainThread 2013/10/08 18:34:23.3009 (sabayon-apply): Traceback (most
recent call last):
File "/usr/sbin/sabayon-apply", line 149, in <module>
sys.exit (util.EXIT_CODE_NO_USER_PROFILE)
SystemExit: 3
===== END RING BUFFER (/usr/sbin/sabayon-apply) =====
This configuration for the debug log can be re-created
by putting the following in ~//etc/sabayon/sabayon-debug-log.conf
(use ';' to separate domain names):
[debug log]
max lines = 1000
gnome-session[3707]: EggSMClient-WARNING: Desktop file
'/etc/xdg/autostart/esc.desktop' has malformed Icon key
'esc.png'(should not include extension)
GNOME_KEYRING_SOCKET=/tmp/keyring-x5SKbN/socket
SSH_AUTH_SOCK=/tmp/keyring-x5SKbN/socket.ssh
Failed to play sound: Not available
(polkit-gnome-authentication-agent-1:3917): GLib-GObject-WARNING **:
cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:3917): GLib-CRITICAL **:
g_once_init_leave: assertion `initialization_value != 0' failed
W: main.c: This program is not intended to be run as root (unless
--system is specified).
** Message: applet now removed from the notification area
** (gnome-user-share:3948): WARNING **: gnome-user-share cannot be
started as root for security reasons.
08/10/2013 06:34:26 PM Autoprobing TCP port in (all) network interface
08/10/2013 06:34:26 PM Listening IPv{4,6}://*:5900
08/10/2013 06:34:26 PM Autoprobing selected port 5900
08/10/2013 06:34:26 PM Advertising authentication type: 'No Authentication' (1)
08/10/2013 06:34:26 PM Advertising security type: 'No Authentication' (1)
Initializing nautilus-gdu extension
Initializing nautilus-open-terminal extension
** Message: applet now embedded in the notification area
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e00019 (Restore Se).
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
kio_http_cache_cleaner: Already running!
Object::disconnect: Unexpected null parameter
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x5200004
specified for 0x5200019 (Restore Se).
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
Object::disconnect: Unexpected null parameter
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e08cb7 (timesofind).
libpng warning: Extra compressed data in IDAT
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e0a6e3 (Server Aut).
Highly appreciate the response.
Thanks And Regards
MZ

The Packaged are already there on the server as the RHEL software DVD is copied on the server.
Yes it was working before the crash, And Even after the Crash i.e
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
and was in the process of installing the sabayon rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps from RHEL software Packages directory.
and it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
   After that I could Not install any rpm from rpm or yum command.
   I 've Downloaded the new sabyon* and Other rpms from the net and tried to install them with rpm or yum command but
    got the same Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
   with yum am getting this error
   error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD.
I 've Tried searching on google as well for at least 10 hours but did not get any help from it so far.
The Reinstallation of OS is not AN Option for me rightnow.
   Could you tell something which i could try & may be that works.
Thanks
MZ

Unable to access gif files from the server

hi all,
i have successfully signed an applet and it is loading in the client system also. in that applet, i instantiated a jbutton as given below:
JButton jb = new JButton(new ImageIcon("http://192.168.91.154:8080/success/set.gif"));
but the icon din appear and a blank button appears, even when accessed from the server system.
if i give the exact path like c:/blazix/webfiles/success/ set.gif, the icon is coming in the server system but not in other systems. i tried without port no also but in vain. pl solve my problem. what i need is how to
specify the path of the file[any file] which is present in server.
or if i put all the gif files in the jar file, can i access the gif files present in the jar file [set for archive] ? if i can, give me the soln for accessing the gif file present in the jar file, so that i need not access the server to get the gif files.(i.e) how to specify the path of the gif files present in the jar file?
i ve one more doubt. the jni library file shld be in the server, and the client has to access the library in the server. i think the applet loaded in the client ll search for the library in the local m/c only . how to make the applet to search for library in the server??
i feel only by using rmi we can solve this problem. am i correct? if so i feel that an appln or applet running in the server shld access the jni library, and the applet in the client side should communicate with this server appln using rmi to get the data.is it correct? is there
anyother way?
i appreciate your help in this regard. thanks in advance. bye, padmanbhan.

Better information on what you are doing with JNI might help you get an answer.
If you have some server process that needs to use JNI, then I would code a servlet to call, instead of using RMI to ge there.
Depending on your environment, and the target audiences environment, RMI may just cause you a lot of grief. Firewalls etc, get in the way of RMI connections and force security holes to be opened in order to work.
If you use a servlet, then traffic to your server process is done via standard http calls, which will already be enabled, because your app runs in a browser.
If ther data requirements are heavy duty, your server could always send an XML stream to the client, which would allow you to describe complex data to the client.
Running JNI stuff from the client directly means a lot of local infrastructure to run your app. The code you want to run, the JNI library ....
If what you have is really an application, but want the convenience of starting it from a browser, look at Java WebStart. Then you can distribute an application via the browser, and WebStart will worry about the deployment issues for you.
In Summary:
Stay away from RMI from applets if you can help it.
If you really have an App, then try WebStart to manage the distribution issues for you.

Unable to Find Shared Files on the Server

Hello world,
I am using Mac in my office and suddenly when I open our company's shared folders, my Mac finder doesn't show latest added files by my colleagues.
I tried the following with no success:
Restart.
Disconnect from the server and reconnect.
Relaunch the finder.
Kill the finder using the Terminal.
My company uses "small business server SBS 2008", and everything was working perfect until I installed "security update 2015-002 V. 1.0"!
Please help.

Well seems like this was a bug that was fixed in SQL 2012 Service Pack 2! I've just applied it to the system in question, and it works as it should now.
At least this information is up here for others who may encounter it now!

Mail unable to save sent messages on the server

Dear all,
i get this error when sending messages with the IMAP mail server. Mails are not copied on the server.
Mail[3277]: Error (null) occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
Everything is fine with Thunderbird so it appears to be a Mail problem
Any help ?
Thanks.
Max

Same problem here, although it only happens with emails and certain large attachments. They send fine but are not copied to the sent items box. I am using exchange/IMAP.

Unable to overwrite report saved on the server?

Similar Messages

Maybe you are looking for