Unable to process inbound EDI docs from TP-multiple Host ID's,1 transaction
Issue:
Unable to process inbound EDI documents from trading partners
(Same doctype and revision, but diff receiver ID’s for host)
Host: ISA ID’s are HOSTA, HOSTB
Transaction: X12, 210, 5010
Trading Partner A: sends EDI document with these values
Interchange Sender ID: TPA
Application Sender's Code: TPA
Interchange Receiver ID: HOSTA
Application Receiver's Code: HOSTA
B2B setups are as below
Business action: Process_210
Operational Capability for Trading Partner A : Process_210_Initiator It has
Interchange Sender ID as TPA
Interchange Receiver ID as TPA
Application Sender's Code: TPA
Application Receiver's Code: TPA
This creates a Process_210_Responder for HOST
It has
Interchange Sender ID as HOSTA
Interchange Receiver ID as HOSTA
Application Sender's Code: HOSTA
Application Receiver's Code: HOSTA
Validated Agreement and deployed, Result is success and everything works fine until here
Note: B2B validates taking everything from Process_210_Initiator except the Interchange Receiver ID that it gets from the Process_210_Responder
New Trading Partner B also sends us an X12, 210, 5010 but he uses Receiver ID as HOSTB
Trading Partner B: sends EDI document with these values
Interchange Sender ID: TPB
Application Sender's Code: TPB
Interchange Receiver ID : HOSTB
Application Receiver's Code: HOSTB
B2B setups are as below
Business action: Process_210
Operational Capability for Trading Partner B : Process_210_Initiator It has
Interchange Sender ID as TPB
Interchange Receiver ID as TPB
Application Sender's Code: TPB
Application Receiver's Code: TPB
This doesn’t create a new Process_210_Responder for HOST It has
Interchange Sender ID as HOSTA
Interchange Receiver ID as HOSTA
Application Sender's Code : HOSTA
Application Receiver's Code : HOSTA
Validated Agreement and deployed, Result the document fails with error
Validation of Interchange parameters failed. Please verify all the Interchange parameters in the B2B configuration match the Group parameters in the message. Make sure that the ecs file for this Interchange is valid
Upon looking at the log file it fails, as the Interchange Receiver ID in data is HOSTB where as in Process_210_Responder it is setup as HOSTA
Work Around that we tried, but could not succeed
Create a new business action called Process_210_HOSTB, created a new Document Protocol Revision X12_5010_HOSTB,Created a doc type 210 version 5010 under that
Used this new Business action for Trading Partner B so the new setups look like this
Business action : Process_210_HOSTB
Operational Capability for Trading Partner B : Process_210_HOSTB_Initiator It has
Interchange Sender ID as TPB
Interchange Receiver ID as TPB
Application Sender's Code : TPB
Application Receiver's Code : TPB
This creates a new Process_210_HOSTB_Responder for HOST It has
Interchange Sender ID as HOSTB
Interchange Receiver ID as HOSTB
Application Sender's Code : HOSTB
Application Receiver's Code : HOSTB
Validated Agreement, but could not deploy as I was getting AIP-11016 SQL error , may be integrity constraint issue
Note: I was able to deploy this agreement if I change the Document Type from 210 to something else like 210_new, but since the document is EDI I can’t have the Document Type as anything except 210
Ramesh,
Sorry for the delay , but this was the first thing I tried and it didn't work, I tried again just to be sure, it didn't work I am getting this error
When group Receiver ID didn't match
"Validation of Group parameters failed. Please verify all the Group parameters in the B2B configuration match the Group parameters in the message. The following parameters do not match the configured parameters in B2B"
In addition, when Interchange Receiver ID did not match
"Validation of Interchange parameters failed. Please verify all the Interchange parameters in the B2B configuration match the Group parameters in the message. Make sure that the ecs file for this Interchange is valid"
Here is the log file extract
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Enter
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl validateEnvelope = true
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Leave
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@12d8ecd
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@1fa5e5e
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:reset Enter
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:reset Leave
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@497062
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Enter
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeReceiverQual, val = [02]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [02]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeSenderID, val = [REMOTETP]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [REMOTETP]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeReceiverID, val = [SLCY]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [SLCY]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = Standard, val = [X12]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [X12]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeControlVersion, val = [00200]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [00200]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = ec_DataNodeName, val = [Interchange]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeSenderQual, val = [02]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [02]
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = ecsFileKey
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = 60DD87849FFE4147BFCEB66842A33298-26-1-4
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsOptFileBlob
2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsFileBlob
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getStream Enter
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getStream Leave
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber sName = Interchange, controlNumber = 210011217
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber return = true
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = TPName
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = RemoteTP
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Enter
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit NodeGUID = {156BEDFC-931E-4923-840D-3AC0BAB670F2} position = 0
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Leave
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@1b5c22f
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Enter
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = GroupReceiverID, val = [STMSLCY]
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [SLCY]
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Value and doc parameter don't match2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = GroupVersionNumber, val = [005010]
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [005010]
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = ec_DataNodeName, val = [Group]
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = GroupSenderID, val = [REMOTETP]
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [REMOTETP]
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = false
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = false
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = TPName
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = RemoteTP
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Enter
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit getLookUpError Key = key = [GroupReceiverID] value = [STMSLCY] param = [SLCY] Value = null
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit NodeGUID = {6EE88EFC-B084-4FA8-8EE8-8C7BD397E9F1} position = 0
2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Leave
2008.07.28 at 14:31:25:073: Thread-10: B2B - (DEBUG) iAudit report :
Error Brief :
5082: XEngine error - Guideline look-up failed.
Similar Messages
-
RICS0001:Internal Error,unable to process the collected data from the device.
Hi all,
I've got the following error in Inventory Collection: 'RICS0001:Internal Error,unable to process the collected data from the device.'
System is CW LMS 2.6
If I search the web I get the following Cisco document:
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html
'...in the log directory look for IC_Server.log.'
IC_Server.log:
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,173,Got Async Request, User Name :admin
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,179,Request ID is : 1289919235488
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,309,Started processing device ID: 3341
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,724,com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,59,Inside ICSDatabaseConnection, MAX_COUNT =20
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,387,Started processing device Name: 9.152.255.101
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,103,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, begins...
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,110,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,147,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device successful...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,149,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,216,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:Before method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,225,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:After method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,245,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population completed...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,105,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, ends...
[ Di Nov 16 15:54:43 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,477,DP time is 15 seconds for 9.152.255.101
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,770,com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange,effect,33,Unexpected error :com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,448,ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,861, Exception occured in process method while processing: 9.152.255.101 ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
ICSException :: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:463)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
at java.lang.Thread.run(Thread.java:534)
I don't know where the German error message comes from. The whole system is English. Translation is: "ASA error -192: primary key for table 'PhysicalElement' isn't distinct'
Thanks for your help!
AlexWell known issue in LMS 2.6. Most likely you are hitting CSCsm97530. As a temporary solution you could remove and re-add problematic device from CS. To get a permanent fix you need a patch (provided by TAC).
-
LMS 4.2.4 Error RICS0001:Internal Error,unable to process the collected data from the device.
Hi
LMS 4.2.4 inventory collection fails with Error RICS0001:Internal Error,unable to process the collected data from the device for few devices.
Can anyone help me out.
Regards
LaxmiThey are definately supported. However such issues are usually due to device packages, if unavailable or not installed.
Please do following :
1. Check Admin > software centre > device updates and check any devices packages available in Cisco.com and install it and recheck.
2. Please do a snmpwalk on problematic device on sysObjectID and share result. Following is the way to do snmpwalk :
GUI - Open the device in Device Centre (Inventory > Tools > Device Center) and open the device with IP and from tools select snmpwalk and do it for sysObjectID (1.3.6.1.2.1.1.2)
CLI : CD to NMSROOT/objects/jt/bin from command prompt. run command as per following syntax:
snmpwalk -v2c -c <snmp_community_string> 1.3.6.1.2.1.1.2
Example :
community string = test123
IP = 10.1.1.1
snmpwalk -v2c -c test123 10.1.1.1 1.3.6.1.2.1.1.2
3. Please check your device package, by clicking on the number of packages in front of Inventory, conifg and image management from :
Admin > System > Software Center > Device Update
Also, check device identity under edit identity option from :
Inventory > Device Administration > Add / Import / Manage Devices
Check my screenshots for details :
Please check and share results.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. ** -
LMS Prime 4.1 RICS0001:Internal Error,unable to process the collected data from the device.
Hello,
I have a problem with inventory collection from several devices getting
"RICS0001:Internal Error,unable to process the collected data from the device."
ERROR,[Thread-20],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,918,Device does not exist in RME, Please check if device is already deletedDid you schedule an inventory collection job?
Delete schedule and recreate it using device group.
Cheers,
Michel -
Error: Unable to process the following response from FOI server
Hi
While integrating BI with mapviewer, I am getting the following error:
Unable to process the following response from FOI server
Please let me know how this can be fixed
Thanks & Rgds
Dipesh
Message was edited by:
user542575One more question about NSDP, Im still wondering how can NSDP work as you only need to declare nsdpInfo.setKeyColumn("xx") --xx
Eg. My result set come from OBIEE, it hase 2 column xx and yy.
Im just copy the sample code to translate the output into xml, the output sample is like:
Column 1 Column 2
440100 0
440200 5
440300 1
So how can MapViewer know that the second column is the value column?
The same question is about when the output is multiple column. -
Hi
Is there any way to process inbound EDI997 files. I tried to process the 997 files with a orchestration but got the below error.
The output message of the receive pipeline "Microsoft.BizTalk.Edi.DefaultPipelines.EdiReceive, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" failed routing because there is no subscribing
orchestration or send port.
The sequence number of the suspended message is 1.
I'm sure the orchestration has no issues since i have processed other files like 214,204, 210 etc.
I want to extract the acknowledgement details from 997 files and log it into a custom table. Please let me know is there any way to do this.
Thanks in advance.As described in the other post, the 997 Schema is included in Microsoft.BizTalk.Edi.BaseArtifacts.dll.
Since it's generated internally, you cannot change the namespace of the generated message.
You can use the ESB Toolkits Remove and Add Namespace components to customize the 997 for you app:
http://msdn.microsoft.com/en-us/library/ff699608.aspx -
Unable to retrieve inbound EDI X12 transactions from VAN using FTPS connect
When out B2B process is polling we do not seeing any attempts to connect to the ftp site. We have no problems putting EDI outbound transactions to the VAN with the same connection, but never see an attempt to get transactions. We enabled the transport trace logging, but are not seeing any connection information in this log file nor in the b2b.log file. Why would we be able to put files to the VAN but not pick up files with the same connection information?
If you enable the transport trace in tip.properties, you will see a log similar to the following:
TransportProperties.TransportProperties():http.receiver.instance_name=IP;PROTOCOL_ENDPOINT=null;file.receiver.password=******;file.receiver.wallet_location=C:\temp/ewallet.p12;file.receiver.user=ekhor;file.receiver.polling_interval=60;polling_interval=60;file.receiver.channel_mask=None;smtp.receiver.protocol=imap;file.sender.channel_mask=None;http.receiver.registry_port=5110;
TransportProperties.TransportProperties():http.receiver.registry_port=5110;port=1688;smtp.receiver.protocol=imap;PROTOCOL_ENDPOINT=null;http.receiver.instance_name=IP;
FileReceiver.init() started ....
FileReceiver.init() completed.
[IPT_HttpRecRegisterBegin] HTTPReceiver.init(): Registering HTTP Receiver ...
RMIResponsePort = null
Host name is 'dlsun1317'.
low port = 5110
high port = 5110
Host dlsun1317 FTP command: USER ekhor
FTP Command: USER, reply:
331 Password required for ekhor.
Host dlsun1317 FTP command: PASS
FTP Command: PASS, reply:
230 User ekhor logged in.
Host dlsun1317 FTP command: PASV
FTP Command: PASV, reply:
227 Entering Passive Mode (144,25,141,108,194,80)
Passive: ip = 144.25.141.108, port = 49744
Connecting to dlsun1317.us.oracle.com:49744
Host dlsun1317 FTP command: NLST //private/ekhor/Acme_endpoint
FTP Command: NLST, reply:
150 ASCII data connection for /bin/ls (144.25.142.57,3110) (0 bytes).
Disconnecting from dlsun1317
Host dlsun1317 disconnected.
Started Receiver at rmi port 5110.
[IPT_HttpRecRegisterCompleted] HTTPReceiver.init(): Completed registering HTTP Receiver.
FileSourceMonitor.prepareShutdown()
FileSourceMonitor.prepareShutdown() - done
The following flag needs to set in tip.properties:
oracle.tip.adapter.b2b.transportTrace=/tmp/transport.log
If you also want to display the password in transport.log (masked by ****** above)
you need to also set
oracle.tip.adapter.b2b.passwordTrace = true
It is possible to have the outbound FTP/S working while the inbound FTP/S is not. The reason is due to different configuration of delivery channels. In the outbound case, B2B uses the remote trading partner delivery channel information to login and to drop the file whereas B2B uses the host delivery channel information to login and to poll whether there are any files in the FTP/S server.
Please verify again that your host delivery channel and tip.properties settings are correct.
Thanks,
Eng -
Error in Processing Inbound 850 Doc - AIP-50547
I am having a problem with setting up my 850 - 997 transaction. I receive the following error after placing the 850 file in the pick up location.
Any one have any helpful suggestions on what could be causing this error and how to fix it.
Yogendra
Machine Info: (org-appsdev1.sybrondental.com)
Description: Unable to identify the trading partner agreement from the given input values. Also verify agreement effectiveToDate
StackTrace:
Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "HEN_KRC_4010", To party[NAME] "Sybron Dental Specialties", Business action name "null"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPName(RepoDataAccessor.java:2039)
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:173)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:483)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:225)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1515)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2007)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1939)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1897)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
at java.lang.Thread.run(Thread.java:534)Update: I am trying to use the interchange ID to get the proper Business Action and have set that parameter in the tip.properties file. Here is the log file
with out first few lines which is the data file.
2007.11.05 at 14:51:03:360: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
2007.11.05 at 14:51:03:360: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
2007.11.05 at 14:51:03:360: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Enter
2007.11.05 at 14:51:03:360: Thread-20: B2B - (DEBUG) MimePackaging:doUnpack:Enter
2007.11.05 at 14:51:03:361: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
2007.11.05 at 14:51:03:361: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@2af8f5
2007.11.05 at 14:51:03:361: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
2007.11.05 at 14:51:03:361: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Exit
2007.11.05 at 14:51:03:361: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
2007.11.05 at 14:51:03:361: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
2007.11.05 at 14:51:03:361: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
2007.11.05 at 14:51:03:362: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {FTP}
2007.11.05 at 14:51:03:362: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = blahblah.850
2007.11.05 at 14:51:03:362: Thread-20: B2B - (ERROR) Error -: AIP-51505: General Validation Error
at oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin.decodeIncomingMessage(GenericExchangePlugin.java:186)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1164)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2007)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1939)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1897)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
at java.lang.Thread.run(Thread.java:534)
2007.11.05 at 14:51:03:362: Thread-20: B2B - (ERROR) Error -: AIP-51505: General Validation Error
at oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin.decodeIncomingMessage(GenericExchangePlugin.java:186)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1164)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2007)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1939)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1897)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
at java.lang.Thread.run(Thread.java:534)
2007.11.05 at 14:51:03:362: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: null Type: null Value: null
2007.11.05 at 14:51:03:362: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage fromParty = null
2007.11.05 at 14:51:03:363: Thread-20: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: null Type: null Value: null
2007.11.05 at 14:51:03:363: Thread-20: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: null Value: null
2007.11.05 at 14:51:03:363: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage security info NULL
2007.11.05 at 14:51:03:364: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Exit
2007.11.05 at 14:51:03:364: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Enter
2007.11.05 at 14:51:03:364: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage toTP null
2007.11.05 at 14:51:03:364: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage hubUrl null
2007.11.05 at 14:51:03:364: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Exit
2007.11.05 at 14:51:03:364: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage ProtocolCollabId = null
2007.11.05 at 14:51:03:365: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage CollaborationName null
2007.11.05 at 14:51:03:365: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Enter
2007.11.05 at 14:51:03:365: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate check non-RosettaNet Message
2007.11.05 at 14:51:03:365: Thread-20: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2007.11.05 at 14:51:03:365: Thread-20: BusinessLogicLayer - (DEBUG) Push Stack: queryWireMessage
2007.11.05 at 14:51:03:370: Thread-20: BusinessLogicLayer - (DEBUG) Pop Stack: queryWireMessage
2007.11.05 at 14:51:03:370: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Exit
2007.11.05 at 14:51:03:371: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Protocol Collaboration Id : null
2007.11.05 at 14:51:03:371: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument Enter
2007.11.05 at 14:51:03:501: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Enter
2007.11.05 at 14:51:03:501: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl validateEnvelope = false
2007.11.05 at 14:51:03:501: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Leave
2007.11.05 at 14:51:03:502: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
2007.11.05 at 14:51:03:502: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@13ec2dd
2007.11.05 at 14:51:04:500: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
2007.11.05 at 14:51:04:500: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2007.11.05 at 14:51:04:510: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeSenderID Val = 012430880
2007.11.05 at 14:51:04:510: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeSenderQual Val = 01
2007.11.05 at 14:51:04:510: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode standard = X12
2007.11.05 at 14:51:04:511: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeReceiverID Val = 7145167811
2007.11.05 at 14:51:04:511: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeControlVersion Val = 00400
2007.11.05 at 14:51:04:511: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeReceiverQual Val = 12
2007.11.05 at 14:51:04:511: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Group Key = GroupSenderID Val = 012430880
2007.11.05 at 14:51:04:511: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode X12 Doc Revision : 004010
2007.11.05 at 14:51:04:511: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode X12 Doc Revision : 4010
2007.11.05 at 14:51:04:511: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Group Key = GroupReceiverID Val = 7145167811
2007.11.05 at 14:51:04:511: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Transaction Count = 1
2007.11.05 at 14:51:04:511: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode DocType = 850
2007.11.05 at 14:51:04:511: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeReceiverQual = 12
2007.11.05 at 14:51:04:511: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeSenderID = 012430880
2007.11.05 at 14:51:04:512: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeReceiverID = 7145167811
2007.11.05 at 14:51:04:512: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupReceiverID = 7145167811
2007.11.05 at 14:51:04:512: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeControlVersion = 00400
2007.11.05 at 14:51:04:512: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupSenderID = 012430880
2007.11.05 at 14:51:04:512: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeSenderQual = 01
2007.11.05 at 14:51:04:512: Thread-20: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2007.11.05 at 14:51:04:512: Thread-20: BusinessLogicLayer - (DEBUG) Push Stack: queryTradingPartnerIdentificationType
2007.11.05 at 14:51:04:513: Thread-20: BusinessLogicLayer - (DEBUG) Pop Stack: queryTradingPartnerIdentificationType
2007.11.05 at 14:51:04:515: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: HEN_KRC_4010 Type: null Value: null to TPName: HEN_KRC_4010 Type: null Value: null
2007.11.05 at 14:51:04:515: Thread-20: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2007.11.05 at 14:51:04:515: Thread-20: BusinessLogicLayer - (DEBUG) Push Stack: queryTradingPartnerIdentificationType
2007.11.05 at 14:51:04:516: Thread-20: BusinessLogicLayer - (DEBUG) Pop Stack: queryTradingPartnerIdentificationType
2007.11.05 at 14:51:04:517: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument overwrite FromTP : TPName = HEN_KRC_4010
2007.11.05 at 14:51:04:518: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument exit
2007.11.05 at 14:51:04:518: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Enter
2007.11.05 at 14:51:04:518: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate msginfo reftomsgid is null, nothing to correlate
2007.11.05 at 14:51:04:518: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Exit
2007.11.05 at 14:51:04:518: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage number of b2b messages 1
2007.11.05 at 14:51:04:518: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage msgtype = 1
2007.11.05 at 14:51:04:518: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processIncomingTPA() Begin TPA Processing..
2007.11.05 at 14:51:04:518: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (before calling processParty) :
initial : null
from : TPName: HEN_KRC_4010 Type: null Value: null
to : TPName: Sybron Dental Specialties Type: null Value: null
final : null
initiating : TPName: HEN_KRC_4010 Type: null Value: null
2007.11.05 at 14:51:04:518: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() direction is incoming
2007.11.05 at 14:51:04:518: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() calling processparty with : TPName: Sybron Dental Specialties Type: null Value: null
2007.11.05 at 14:51:04:518: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() Begin..
2007.11.05 at 14:51:04:519: Thread-20: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2007.11.05 at 14:51:04:519: Thread-20: BusinessLogicLayer - (DEBUG) Push Stack: queryTradingPartner
2007.11.05 at 14:51:04:520: Thread-20: BusinessLogicLayer - (DEBUG) Pop Stack: queryTradingPartner
2007.11.05 at 14:51:04:520: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() Sybron Dental Specialties is hosted party
2007.11.05 at 14:51:04:520: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() End..
2007.11.05 at 14:51:04:520: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() after calling processparty : TPName: Sybron Dental Specialties Type: null Value: null
2007.11.05 at 14:51:04:520: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (after calling processParty):
initial : null
from : TPName: HEN_KRC_4010 Type: null Value: null
to : TPName: Sybron Dental Specialties Type: null Value: null
final : null
initiating : TPName: HEN_KRC_4010 Type: null Value: null
2007.11.05 at 14:51:04:520: Thread-20: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2007.11.05 at 14:51:04:520: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() docTypeName: 850 docTypeRevision: 4010
2007.11.05 at 14:51:04:520: Thread-20: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null -
Processing Inbound IDOC's from FTP.
Hi,
I have an issue where IDOC's (WPUBON01 & DEBMAS01) are being saved in ftp folder and once these IDOC's are saved, we have to process it in SAP System, i would like to know the simple way of having these IDOC's processed in Unix based SAP system as the IDOC's will be coming in at Real time evey minutes or Seconds.
is there a way to do it with out ABAP process i mean just by using the Unix Scripts or by triggering the SAP background job.
Thanks in Advance.Hi,
for testing purposes you can trigger inbound IDoc processing in transaction WE16. Otherwise you can schedule program RSEINB00 to periodically import IDoc into system. You can make a copy of that program and made changes if you need to add some extra logic.
Cheers -
Unable to process RAW .PEF .DNG from Pentax K-7
I have the latest updates. Camera Raw 3.1, Aperture 3.0.2, OS 10.6.3... when i first import the images I can process them as normal. My RAW adjustments are available. But then after a few minutes aperture will update them and it will say the file has been processed by an earlier version (which is a lie because I have never processed them before) and there's a button to "reprocess". The images will lose all adjustments and have a green hue... no boost or anything. This is happening with both .PEF and .DNG from my Pentax K-7... which is running firmware 1.3
I've tried reinstalling aperture 3.0 but it's the same. I've also deleted raw camera 3.1 by:
sudo rm -rf /System/Library/CoreServices/RawCamera.bundle
and reinstalled... it's still the same.
what gives?Hi, i have exactly the same issue on my computer, but with a Nikon D90. I just completely reinstalled system (OS, Aperture, Camera Raw) from scratch on new harddisk, no avail. Really mysterious, get indeed a weird green hue, and once image goes like this, there is no turning back. Still looking for solution as well - sorry!
-
Change inbound EDI order types
Hi Gurus,
Is there a transaction where in we could change inbound EDI orders from customers to process warranty orders.
Thanks
AnushaLook at this blog..Will tell you how to troubleshoot your IDoc issues..
<a href="/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process of ALE Process</a>
Raja T -
Inbound EDI multiple customers using 1 partner profile
I would think that it's possible to set up a single partner profile in WE20 through which you can process multiple idocs against multiple customers for order processing. Can anyone guide me on how to achieve this.
Thanks, MartAbsolutely. You could have an EDI Partner called 'GENERIC' for example, and could use that to process inbound EDI Sales Orders. Obviously you would need an identifier to represent the correct Customer account, ideally this would be the Sold-to number. If it's not your Internal Sold-to, but another unique number, then you should be able to add mapping via transaction VOE4 to table EDPAR. I.e the Customers sends an external number 123 representing their Store Id, you map that back to your internal Customer Number. Only trouble with this is if two different Customers had the same external Id, as you would have no control over that. For our generic EDI Partners, the Customer Number is mandatory.
Cheers, Paul. -
Hello,
my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
Thanks in advance!
Sincerely,
hoho33"
Can you restore that JSON backup in a new profile?
Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
A JSON backup starts with: {"title":"","id":1,"dateAdded"
A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
You can try if you can restore that JSON backup in a new profile.
Create a new profile as a test to check if your current profile is causing the problems
See Basic Troubleshooting: Make a new profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
firefox support won't to help me to solve my problem!
If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
like HP, Dell , etc. give remote desktop support to their users!
Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
Greetzz -
I was in the midst of a Firefox session w/two windows open. Nothing special about the sites. No fancy javascripts or anything. When I closed the second window and opened the "History, Show all History" pull-down, the Library screen had no data in it.
I looked for the Bookmarks.html file in my profile and it is missing. I tried renaming an old .bak file from a couple years ago and I can open it as a file and see the text of it displayed but Firefox will not recognize it as and open it as the Backups file.
Following the directions already posted - using "History, Show all History" then the "Import and Backup, Restore" process - allows Firefox to see all the backups, but trying to restore from any of them yields the "Unable to process the backup file" error message.
I have re-started my machine from a cold start - twice now.The file that stores bookmarks is probably damaged, for details on how to fix that see http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox
-
Hi All,
we are calling sharepoint webservice from our web application but we are getting below error while calling webservice.
Server was unable to process request. ---> Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Our code is as below.
We used below 2 options but we got same error for both scenario,
1)
ListService.Lists objLists = new ListService.Lists();
NetworkCredential objNetworkCredential = new NetworkCredential("username", "password");
objLists.Credentials = objNetworkCredential;
System.Xml.XmlNode objXmlNode = objLists.GetListItems("Tasks", null, null, null, null, null, null);
2) ListService.Lists objLists = new ListService.Lists();
objLists.Proxy = new WebProxy("proxyaddress",true);
NetworkCredential objNetworkCredential = new NetworkCredential("username", "password");
objLists.Credentials = objNetworkCredential;
System.Xml.XmlNode objXmlNode = objLists.GetListItems("Tasks", null, null, null, null, null, null);
Please help me what is the problem while calling this service.
Thanks in advance.
Regards,
Kaivan ShahHi ,
Here is a similar case ,you can have a look at this .
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) -Accessing the sharepoint site:
http://social.msdn.microsoft.com/Forums/en-NZ/sharepointworkflow/thread/5eab2116-7d7c-4bf3-bfa1-48bd8992dded
Thanks,
Entan Ming
Maybe you are looking for
-
How do I reduce the size of Firefox on my HP laptop. I don't want the ful screen.
On start up Firefox covers the full screen. I manually adjust it, but on the next start up it does the same. I'm using a HP Pavilion dv1000 of indeterminate age . Any suggestions?
-
hi i am working in BPM process... i created correlation and i try to assign the correlation in the Receiver step in Activate correlation field but the correlation is not assigning..but it is displayed in the list box... wat is the reason.... thx...
-
Firefox 12.0 Where do I now uncheck "Warn me when websites try to redirect or reload the page"
I get this warning when using gmail. I cannot find where to turn it off. There s no Preferences on the menu. Options, General Tab does not have it. How do I turn off the warning.
-
IOS 10.8.2-image capture and my canon camera
Is there an update for image capture that will allow me to connect to my canon camera? I get a dialogue box saying this os can't use find the camera. Thanks, d440
-
My I Tunes Password is not taken in Clash of clans Shop. it says wrong?
my I Tunes Password is not taken in Clash of clans Shop. it says wrong?