Unable to provision Business Rules access for users
Hi all,
Our analytic server is properly configured in Shared Services : we can correctly create users, provision Essbase access for those users, change password, etc...
An application business rules is visible in the left pane of shared services, but we are not able to provision Business rules access for users.
When we try to provision access for a user, we have only access to the Analytic properties.
What's going wrong ?
It sounds like the user you login to HSS with hasn't been assigned with "Provisioning Mgr" rights to business rules.
Get the HSS admin user to grant you these rights and you should then be able to provision users to use Business RUles.
Gee
Similar Messages
-
Unable to find Business Rules in the JDeveloper while creating new project
Hi All,
I am going through the chapter 9 Creating a Rule-enabled Non-SOA Java EE Application for JDevloper 11g. I am following the instruction given in the chapter.
However I am unable to find a Business Rules category for creating a Business rules directory.
Probably it has to be activated from somewhere.
I tried searching its significance with JDev installation but haven't got anything.
It seems very basic level problem, however...Please let me know if anybody knows how to solve it
Thanks,
Makarand.
Edited by: user11223806 on Aug 12, 2009 7:48 AMDid you install the SOA extension for JDeveloper from the help->check for updates?
-
Problem with Business Rules access from Shared Services
Hello,
When trying to access Business Rules from Shared Services (expand Business Rules and click on the application) I get the "Refer to the Security Guide to configure security permissions for this application" message, but the user is fully provisioned for Business Rules. It happens even logged on as admin. Access from Administration Services works fine. The version Hyperion system 9 (9.3.0.1). What is wrong? Help, please.
Thanks,
TimurYou can't access Business Rules from Shared Services. This is no different from any other application - Planning, Essbase, etc. You can provision users to the application roles, but you can't actually do anything with the application, other than security, in Shared Services. You use Admin Services to maintain Business Rules.
-
Business rule access privilege
Hi,
Please help me to understand; how to assign user privilege for Business rule.
I mean should i assign users for Planning, essbase and Planning?
Edited by: Kumar 1 on Nov 22, 2010 3:51 AMIn shared services provision user1 with a role for the planning application, if you are on 9.3 (which I think you are) you might also need to provision a hbr role e.g http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_cas_help/apgs03.html
Then in EAS edit the rule and go to access permissions and provision user1 :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hbradmin/ch03.html
Cheers
John
http://john-goodwin.blogspot.com/ -
Hello Experts,
Could anyone please help me with an easy solution to turn-off execution of Business rules in Hyperion Planning? We've closed the Budget scenario which makes the webforms readonly, but users still can run Business rules that are in their tasklists. This is messing up our numbers as the rules wipe out our allocations. So far, the only solution i could think of was to remove the user access on BR. I dont like this option because i've to put the security back in for all the projects again. I would think Oracle obviously has a better and cleaner way of doing this.
Thanks
SamHi Sam,
If I understand, your problem is you dont want the business rule to impact your budget for the current year and version. If any user run the business rule if should not impact any current years budget values.
If my above understanding is correct, then you can create a variable in the business rule either as promt or saved assumption and set that either for next year (as current year is already closed) or set for some other non working version.
This will ensure that your data for current years budget and version is not impacted even if any user run it by mistake through task list.
Thanks
Chirag Tarodkar -
Security group provisining only to show Business rules to the users.
Hi,
Could anybody tell what setting in the Group Provisioning required so that users in that group only see business rules in planning application and not calculation script on the servers. We work on 9.2 env. ?
Thanks,Yes group is provisioned as planner and have essbase server access... and user in this groups are able to see both business rules and calc script in planning application... but we want to show them only business rules and not calc scripts...
-
Ssrs security access for users on a different domain
Hi
We are using ssrs 2008 r2 and have added a new domain to our network as we are working with another company.
Our original domain was say "DomainA" which can access all our reports, how do we give access to the new domain "DomainB" access to our reports?
We are unable to add DomainB users to our AD security groups so I have created a windows groups called SSRS_DomainB_Users and given them access to our parent folder and also added them into site settings as a system user.
What is the best way to deal with this?
Users in DomainB will eventually be added to DomainA and DomainB will then be deleted.
One of the users I am testing with gets an error message :
User 'Domain name/user' does not have the required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
ThanksHi Nasa1999,
According to your description, you want your reports can be accessed by user from different domain. Right?
In this scenario, we should do Internet Deployment for your reports so that users from different domain can access the reports. Please the articles below:
Planning for Extranet or Internet Deployment
Using Reporting Services in an Internet/Extranet Environment
SQL Server 2008 Reporting Services
for Internet deployment
Reference:
SSRS reports
global access
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Free/busy information error for users whose primary SMTP is internal domain
We have a scenario where we have some users on our network who use s web-based mail service but have AD logins as they need access to internal resources (file and print).
We have been asked to set up access for these users to the meeting rooms. An initial idea was to create a mailbox for each of these people and set up them up with an email address in the internal domain (company.local.co.xx). This has allowed them to use
the meeting rooms but they cannot retrieve the free/busy information. When looking at available times, get the standard message "Suggestions cannot be provided because free/busy data could not be retrieved"
It's not really clear why this isn't working. Suggestions?Thanks for the response. Those were my initial thoughts too.
However, doing a test of the email configuration shows that it successfully finds the OOF, OAB, etc.
Hi,
Since the OOF and OAB Urls can be retrieved properly from Autodiscover service, please directly access the OOF url from IE and see whether a proper XML file is returned.
Regards,
Winnie Liang
TechNet Community Support -
Hi,
I have newly set up few business rules in 9.3.1. I have two issues here.
1. No users listed :In Access Privileges tab,when I click on 'Add' to assign access to a user on this BR, there is only one user i.e admin(Internal) and no other users listed. But in Groups, there are groups listed and I have assigned access to those groups on this BR.
2. Users can not view BRs in planning web : Although I have assigned access to available groups, the users in those groups can not see this business rule in planning web.
Note : Even though I login to planning web as admin, I can not see BRs.
Any help would be greatly appreciated.
Thanks
AshokIf you have not already it is worth going through the following doc in Oracle Support - "Troubleshooting Hyperion Business Rules Issues [ID 763345.1]"
Cheers
John
http://john-goodwin.blogspot.com/ -
Cannot see a user id when assigning Business Rules to a user
User is properly provisioned in Shared Services. But cannot see her when assigning Business Rules security.
please help me with this issue.
thanks,
Ricky...Hi,
In AAS, under HBR node, right click Administration and refresh user list.
You could also try to refresh the security from shared services.
HTH
Seb -
Updating Business Rule access and security
Hi All,
We have recently load balanced the planning servers, as a part of this currently we have to update "Location" and "Acces Privileges" tabs to reflect "All Locations".
There are hundreds of business rules for us across all servers. I was hoping if there is an automated or maxl way of updating access for business rules rather than manually pulling all the groups in each business rule.
any thoughts on this.
Thank you
ArunHi john,
Thanks .It works fine....
I have another question.
I have some calculationscripts along with this business rule.I m not able to find out a option to launch a calculation script from the planning application.
I m logging in as User1(Planner).
do I need to add security for calculation script?
I didn't get any option to add security to calculation scripts in eas?
Plz help
Thanks -
Unable to create business rule in composite.xml
Hi,
When I am trying to create a business rule in composite.xml I am getting the error as shown below:
java.lang.Exception: An attempt to add a schema to the schema browser failed!
Please make sure schemas are in the appropiate directories.
at oracle.tip.tools.ide.rules.dictionarybuilder.CreationDialogUtil.addSchema(CreationDialogUtil.java:129)
at oracle.tip.tools.ide.rules.dictionarybuilder.CreationDialogUtil.createFacts(CreationDialogUtil.java:103)
at oracle.tip.tools.ide.rules.dictionarybuilder.jdev.JDevDictionaryFileBuilder.createRuleDictionary(JDevDictionaryFileBuilder.java:285)
at oracle.tip.tools.ide.rules.dictionarybuilder.RulesCreationDialog$1.run(RulesCreationDialog.java:101)
at java.lang.Thread.run(Thread.java:662)
It would be helpful if anyone has any suggestions or solution.
Thanks & Regards,
PadmajaMake sure there are no exceptions in the schema which you are using for defining the structure of Business Rule facts and try it again
Thanks
N -
Business Rules Access Privileges Strange Issue
Hello,
i know it's weird but it seems that planning has problems with Access Privileges on Business Rules.
This morning i found that some Privileges were missing (groups disappeared from Access Privileges tab on BR). When i try to fix this (adding it again), i have to repeat the operation more than one time to make it works.
What it could be? Sync problem with repository? ...i had no errors on message panel.
I run Hyperion Planning 9.3.1.1.8 on windows environment.
thank u,
danieleHi,
I would of recycled the services first to see if it was a communication issue.
Cheers
John
http://john-goodwin.blogspot.com/ -
Unable to open Business Rules in EAS
For some reason, I all of a sudden cannot open business rules in EAS.
I get the following errors:
Error while sending command to HBR Server running within the EAS server.
Detail:Server returned HTTP response code: 500 for URL: http://usnbka091p:10080/eas/eas
The only thing that happened was that something was messed up with our active directory, but it eventually got fixed. Additionally, it takes a very long time for my EAS to open.
Does anyone have any ideas on where I can look for additional log files to review or anything else that could be causing the problem?I did manage to get one of the BR's modified by using the admin ID, however there is still an issue. It seems to have something to do with one of our active directories not working. We recently changed active directories, however, there wasn't an issue until all the active directories went down last week. It seems like the original directory is no longer up and running. I am currently waiting for a response from our IT. We'll see how that goes.
-
Unable to view Business Rules in Planning application
Hi All,
After changing the password of hypadmin i am not able to view all the business rules in my planning application and EAs console business rules wizard also doesn't shown planning when i am trying to add location.
Please suggest how to do password change in Hyperion 11.1.2.
Regards,
VasuHi,
If it's admin id(configuration id), then you need to configure all the components which is registered with shared services after changing your password.
For example, EAS configuration, only re-configure for -> Register with shared services.
Like the same way we need to do for all components with new password & for planning apps, need to edit datasource with new password.
Thanks.
Maybe you are looking for
-
After several repairs, still having heating issue with MacBook Pro (mid '09)
EDIT: this post got removed the first time for not being constructive enough. I've now edited the post. This is going to be a lengthy post, so bear with me. 2 months ago, I suddenly noticed my MacBook Pro (medio 2009, 15", 4GB RAM, GeForce 9400M) hea
-
"Adobe Media Core CS6 has stopped working" error.
I have had Premiere Elements 11, Photoshop Elements and LR 4 installed for over a year on my Windows 7 computer. Over the last couple months, within a few minutes of turning on my computer I get an error that Adobe Media Core CS6 has stopped working.
-
Pass in date from shell script to java program
Hi, I need to pass in some parameter to my java program. eg 'java SomeProgram yyyy mm dd hh mm ss' How do i use the shell script to generate the valeus for the year, mth day etc? The program is running once everyday. I tried $argu0 = `date+%y` java S
-
Username and password for oracle financials
Hi, Can anyone help me in finding out the username and password for oracle financials application. Thanks in advance Jaya
-
Updated to latest operating system OS X Mavericks on MacBook Pro and now won't let me drag files onto a flash drive.