Unable to refresh database after forced stop of the business rule

Hello, Experts!
I am currently testing and tuning performance of business rules in Hyperion Planning 9.3.1. I launched a business rule in EAS Console that was running way too long so I decided to stop it manually. But after this manual stop when I try to refersh Essbase from Hyperion Planning (Administration>Manage Database>Database Refresh) I get the following error:
+com.hyperion.planning.olap.EssbaseException: Cannot restructure. There are other active users on database [%s] (1013101)+
I remember having done forced business rule stops earlier in other Hyperion Planning 9.3.1 deployments and they did not generate such errors. So could you help me on how I prevent Hyperion Planning from this error after manual business rule stops because most likely I will have to do them in the future? Thanks very much!

John, you are right. I erred earlier: I was thinking that I had stopped the business rule, but it still was running. I had not seen this rule running because of lack of permissions for my user name. After adding extra Essbase permissions to my user name in HSS, I was able to see in EAS Console in Ediit>Sessions window that the rule was still running and Hyperion Planning definitely will produce the above error message if one tries to refresh Essbase cube while the rule is still running.

Similar Messages

Cannot mount database after force server restart.

The server is hung. After forced reboot all databases was successfully mounted except one public folder, that gives an error:
MapiExceptionSearchEvaluationInProgress: Unable to mount database. (hr=0x80004005, ec=1177)
The error ocured on Exchange Server 2010 SP3 Standard Update Rollup 5.
Update to Rollup 7 does not solve the problem.
Eseutil 14.03 shows no errors.

Move all the log files include all other files to another location and try to mount it.
Post the update
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Unable to Download Apps after going through all the troubleshooting. What do I do next?

Unable to Download Apps after going through all the troubleshooting. What do I do next?

Also, see here
http://decipher-media.blogspot.co.uk/2011/05/itunes-sync-vs-backup-how-to-ensure -you.html
http://support.apple.com/kb/HT4946

Saved passwords disappeared after forced reboot of the system.

As I said. After force reboot of the system the list of all my passwords was cleaned up. Bookmarks are ok. FF was closed, before reboot. Any ideas how to return them ?

Hi Ishini,
No problem. Firefox would not keep a back up of "key3.db" anywhere. So, if you want to recover your passwords, try to use the following tool.
* [https://www.piriform.com/recuva Piriform Recuva]
Just download the free trial and attempt to recover the "key3.db" file. Just point it to your Firefox installation directory.
This should solve your problem, but there is no guarantee that the file will be there.
So, if this helped, mark it as helpful, so other users who are facing the same or similar issues, can resolve their problem as well.
Have a good one,
Michael.

Unable to recover database after rman recovery and database open resetlogs

I am running Oracle 10.2.0.5 on OpenSUSE 9. I have been trying to upgrade the database to 11g, through dbua. I was getting stuck at one point during the Oracle Server install and the upgrade failed and I was forced to restore the database to an earlier backup.
Below is the current place that I am stuck. As you can see I opened the database multiple times and reset the logs. Now I am afraid that my controlfile and redo log backups are out of sync and i can't get them back on track. Before when I actually got the database recovered RMAN would immediately throw:
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
OPA-00600: ORA-00600: internal error code, arguments: ...
The database would open with ALTER DATABASE RESETLOGS but any query on non-system tables would fail and throw:
ORA-04045: errors during recompilation/revalidation of LCRS_DEV1.FACILITY_REF
ORA-00600: internal error code, arguments: [17069], [0x1158ED180], [], [], [],
I hope I have not dug myself into too deep of a hole here.
Here is the trace from my most recent attempt.
RMAN> startup nomount;
connected to target database (not started)
Oracle instance started
Total System Global Area 3070230528 bytes
Fixed Size 2099424 bytes
Variable Size 301991712 bytes
Database Buffers 2751463424 bytes
Redo Buffers 14675968 bytes
RMAN> list incarnation of database;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 08/02/2011 15:49:04
ORA-01507: database not mounted
RMAN> restore controlfile from autobackup;
Starting restore at 02-AUG-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
recovery area destination: /opt/oracle/flash_recovery_area
database name (or database unique name) used for search: LCRSDEV
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758129928_73jr2s7p_.bkp
channel ORA_DISK_1: control file restore from autobackup complete
output filename=/opt/oracle/oradata/LCRSDEV/control01.ctl
output filename=/opt/oracle/oradata/LCRSDEV/control02.ctl
output filename=/opt/oracle/oradata/LCRSDEV/control03.ctl
Finished restore at 02-AUG-11
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
RMAN> list incarnation of database;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 LCRSDEV 756543625 PARENT 1 22-OCT-05
2 2 LCRSDEV 756543625 PARENT 525876 20-JAN-11
3 3 LCRSDEV 756543625 PARENT 92348137 18-JUL-11
4 4 LCRSDEV 756543625 PARENT 95654931 01-AUG-11
5 5 LCRSDEV 756543625 PARENT 95675699 01-AUG-11
6 6 LCRSDEV 756543625 PARENT 95676699 02-AUG-11
7 7 LCRSDEV 756543625 PARENT 95676700 02-AUG-11
8 8 LCRSDEV 756543625 CURRENT 95676701 02-AUG-11
RMAN> restore database until scn 95676700;
Starting restore at 02-AUG-11
Starting implicit crosscheck backup at 02-AUG-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 6 objects
Finished implicit crosscheck backup at 02-AUG-11
Starting implicit crosscheck copy at 02-AUG-11
using channel ORA_DISK_1
Finished implicit crosscheck copy at 02-AUG-11
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758129928_73jr2s7p_.bkp
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 08/02/2011 15:52:04
RMAN-20208: UNTIL CHANGE is before RESETLOGS change
RMAN> restore database;
Starting restore at 02-AUG-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /opt/oracle/oradata/LCRSDEV/system01.dbf
restoring datafile 00002 to /opt/oracle/oradata/LCRSDEV/undotbs01.dbf
restoring datafile 00003 to /opt/oracle/oradata/LCRSDEV/sysaux01.dbf
restoring datafile 00004 to /opt/oracle/oradata/LCRSDEV/users01.dbf
restoring datafile 00005 to /opt/oracle/oradata/LCRSDEV/LCRS_TBS.dbf
channel ORA_DISK_1: reading from backup piece /opt/oracle/flash_recovery_area/LCRSDEV/backupset/2011_07_22/o1_mf_nnndf_TAG20110722T111922_72m8rc5x_.bkp
channel ORA_DISK_1: restored backup piece 1
piece handle=/opt/oracle/flash_recovery_area/LCRSDEV/backupset/2011_07_22/o1_mf_nnndf_TAG20110722T111922_72m8rc5x_.bkp tag=TAG20110722T111922
channel ORA_DISK_1: restore complete, elapsed time: 00:23:36
Finished restore at 02-AUG-11
RMAN> recover database until scn 95676700;
Starting recover at 02-AUG-11
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/02/2011 16:16:28
RMAN-20208: UNTIL CHANGE is before RESETLOGS change
RMAN> recover database;
Starting recover at 02-AUG-11
using channel ORA_DISK_1
starting media recovery
archive log thread 1 sequence 90 is already on disk as file /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_90_72ml85v3_.arc
archive log filename=/opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73jr20qc_.arc thread=1 sequence=1
unable to find archive log
archive log thread=1 sequence=1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/02/2011 16:25:04
RMAN-06054: media recovery requesting unknown log: thread 1 seq 1 lowscn 95676701

Thanks for the reply Hemant. I have reset the database for the controlfile that I am using as backup and now I am not able to recover until the correct SCN. I am thinking that my recovery catalog is bad. If I mount with the current controlfile I have this list of incarnations:
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
*1 1 LCRSDEV 756543625 PARENT 1 22-OCT-05*
*2 2 LCRSDEV 756543625 PARENT 525876 20-JAN-11*
*3 3 LCRSDEV 756543625 PARENT 92348137 18-JUL-11*
*4 4 LCRSDEV 756543625 PARENT 95654931 01-AUG-11*
*5 5 LCRSDEV 756543625 PARENT 95675699 01-AUG-11*
*6 6 LCRSDEV 756543625 PARENT 95676699 02-AUG-11*
*7 7 LCRSDEV 756543625 PARENT 95676700 02-AUG-11*
*8 8 LCRSDEV 756543625 PARENT 95676701 02-AUG-11*
*9 9 LCRSDEV 756543625 CURRENT 95676702 02-AUG-11*
However if I restore the controlfile to the earlier version I am getting the following output from the process:
RMAN> startup nomount;
connected to target database (not started)
Oracle instance started
Total System Global Area 3070230528 bytes
Fixed Size 2099424 bytes
Variable Size 301991712 bytes
Database Buffers 2751463424 bytes
Redo Buffers 14675968 bytes
RMAN> restore controlfile from '/opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_07_22/o1_mf_s_757164997_72m9rqw3_.bkp';
Starting restore at 03-AUG-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
output filename=/opt/oracle/oradata/LCRSDEV/control01.ctl
output filename=/opt/oracle/oradata/LCRSDEV/control02.ctl
output filename=/opt/oracle/oradata/LCRSDEV/control03.ctl
Finished restore at 03-AUG-11
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
RMAN> list incarnation of database;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 LCRSDEV 756543625 PARENT 1 22-OCT-05
2 2 LCRSDEV 756543625 PARENT 525876 20-JAN-11
3 3 LCRSDEV 756543625 CURRENT 92348137 18-JUL-11
RMAN> restore database until scn 92348137;
Starting restore at 03-AUG-11
Starting implicit crosscheck backup at 03-AUG-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 1 objects
Finished implicit crosscheck backup at 03-AUG-11
Starting implicit crosscheck copy at 03-AUG-11
using channel ORA_DISK_1
Finished implicit crosscheck copy at 03-AUG-11
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_01/o1_mf_1_1_73g3hn6o_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_01/o1_mf_1_2_73g3hnxq_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_01/o1_mf_1_1_73g0rts6_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_134_72v9gv4s_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_138_72v9p4b4_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_120_72v8wwg0_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_121_72v8x5ty_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_131_72v9cnrv_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_139_72v9q5ok_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_137_72v9n4t5_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_136_72v9l88q_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_123_72v8ytm8_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_132_72v9dcxd_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_124_72v8zkg0_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_128_72v96qm1_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_135_72v9jqmx_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_129_72v98q3r_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_125_72v91g3b_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_118_72v8v8r4_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_127_72v9626w_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_130_72v9bqtb_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_141_72vncy6g_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_122_72v8ycd4_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_126_72v94cns_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_133_72v9fb17_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_140_72vn6wgo_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_119_72v8v9hf_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73j3wo01_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_2_73josgf1_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73jr20qc_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_2_73jh223h_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73josflf_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73jvqdqs_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_3_73josh91_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73j91rh9_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_91_72mqlnx9_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_111_72mrdr5m_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_96_72mqx958_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_114_72mrgsf9_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_94_72mqs6gj_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_102_72mr3893_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_99_72mr2h6c_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_104_72mr5hfm_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_109_72mrc83z_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_98_72mr080w_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_93_72mqq36m_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_97_72mqz0mm_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_116_72mrk268_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_101_72mr31yv_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_110_72mrddhg_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_95_72mqv3hp_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_105_72mr5vq4_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_115_72mrjd2s_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_106_72mr7hnt_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_100_72mr2qfc_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_112_72mrfc5j_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_107_72mr909t_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_103_72mr4pol_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_113_72mrfsb9_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_117_72mrl5mf_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_108_72mrb13l_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_90_72ml85v3_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_92_72mqnxz1_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_26/o1_mf_1_143_72y6ww71_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_26/o1_mf_1_144_72ybybps_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_26/o1_mf_1_142_72xt10j7_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_26/o1_mf_1_145_72yccy5z_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_01/o1_mf_s_758043324_73g3jfxx_.bkp
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_01/o1_mf_s_758035850_73fw6vrc_.bkp
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758133684_73jvr5px_.bkp
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758127608_73jot9x0_.bkp
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758109276_73j3xfom_.bkp
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758129928_73jr2s7p_.bkp
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_07_22/o1_mf_s_757164997_72m9rqw3_.bkp
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 08/03/2011 12:53:19
RMAN-20208: UNTIL CHANGE is before RESETLOGS change
Edited by: K Doyle on Aug 3, 2011 10:22 AM

Unable to load Database Error for one of the BSO Application.

Hello Everyone,
We have one Production Issue like suddenly the an Application Fiji while should be running was stopped. When i tried to restart it its showing Error.
gvw3086-v.atlanta.hp.com:1423.Fiji Start application August 28, 2013 8:32:24 PM SGT Failed
Error: 1002141 Unable to load database [Arirang], error code [1019038]
gvw3086-v.atlanta.hp.com:1423.Fiji.Consol Start database August 28, 2013 8:33:30 PM SGT Failed
Error: 1002141 Unable to load database [Arirang], error code [1019038].
I checked the Log but not sure it correct or not i see this Error message.
[Wed Aug 28 11:33:48 2013]Local/Fiji///7944/Info(1002089)
RECEIVED ABNORMAL SHUTDOWN COMMAND - APPLICATION TERMINATING
But i also saw this error before but the application use to start automatically but this time it did not.
can anyone help me on this.
Regards,
Naveen

Hi,
As i mentioned above its only for one Application Fiji. For a temporary Solution we tried to restart the Hyperion Services. But this did not work. One of the the Hyperion Service HyPService(not sure of the exact name). did not restart. So we have done a a fail over to other node and now the Fiji apps is running. But i don't think so what we have done is the correct fix for the solution. Have any one faced this problem.
Hi John,
Which Doc ID you mean to refer me is that the doc which comes with the Essbase Software.
Regards,
Naveen

Unable to copy database with different name in the same instance

I had a huge database and wanted to try some change optimization changes.
So wanted to make a copy of the database along with data in the same instance.
I have tried copy database wizard several times but always see the error as in attachment.
Can someone let me know how to troubleshoot further?
If this is not the correct way please suggest how do i copy a database with different name in the same instance along with data.

Hi Nandu,
From the screenshot, the error 1813 happens when corrupt database log is attempted to attach to the SQL Server. To work around this issue, please preform the following steps, for more details, please review this
blog.
1. Create a new database with same name which you want to recover. Make sure that the MDF file and LDF file have same name with previous database data and log file.
2. Stop SQL Server. Move original MDF file from old location to new location by replacing just created MDF file. Delete the LDF file of new location just created.
3. Start SQL Server. At this point, the database is in suspect status.
4. Make sure that system tables of Master database allows to update the values. Please note that you will be performing this in query window.
Use Master
go
sp_configure 'allow updates',1
reconfigure with override
go
5. Change database mode to emergency mode.
SELECT *
FROM sysdatabases
WHERE name = 'DatabaseName'
BEGIN
UPDATE sysdatabases
SET status = 32768
WHERE name = ' DatabaseName '
COMMIT TRAN
6. Restart SQL Server. Then execute the following DBCC command in query window to create new log file.
DBCC TRACEON (3604)
DBCC REBUILD_LOG(databasename,'c:\yourdatabasename_log.ldf')
GO
7. Reset the database status using following command.
sp_RESETSTATUS yourdatabasename
GO
8. Turn off the update to system tables of Master database running following script.
USE MASTER
GO
sp_CONFIGURE 'allow updates',0
RECONFIGURE WITH OVERRIDE
GO
9. Reset the database status to previous status.
BEGIN
UPDATE sysdatabases
SET status = (value retrieved in first query of step 5)
WHERE name = 'DatabaseName‘
COMMIT TRAN
GO
Make sure that you have done all the steps in order and restarted SQL Server where it is mentioned. Also run SQL Server Management Studio as administrator.(Right click-> Run as Administrator)
Thanks,
Lydia Zhang

Error 1200323 after long hours of running business rules?

Hi all,
I am experiencing some problems with running business rules....
I got a sequence which includes about 20 business rules to run....
After several hours of running this sequence, it shows the errorcode: 1200323, which said that "Error parsing formula for [REGION DEFINITION] (line 1): expression expected after [(].
However, worst of all, this error does not always happen. Sometimes, I could run this sequence successfully without any error happening.
Any one experienced the same problem before?
Any suggestion are welcome and appreciated....
Thank you,
Casper

Gregg Stewart wrote:
...my iMac screen has this low audible hiss and pop, then afterwards it has a difficult time redering images even images from the web, and only after being powered down overnight does it appear to do better.
I also play a 3d video game from time to time while in the Windows 7 Bootcamp mode, and it appears the problem happens sooner when doing that.
You have a defective video card, take it in for service.
Run a hardware check by holding the d key down (for a long time) when rebooting, wrtie down what it says if anything.
If you didn't buy AppleCare, you have 1 year from the day of purchase to do so, it's highly recommended as the iMac's all in one design is prone to issues with heat, and it's not modular so one part goes down requires the entire machine to be brought in for service.
IMO, I never recommend a iMac expect to very light desktop consumer type users, heavy business users I recommend a MacPro this way they can switch parts and keep on going, unless they are a rich buisnes that can afford to have another iMac on standby.

Unable to refresh browser after HTTPService Call

I"m having a very similar problem and I'm wondering if any resolution has come up. I use an Init() which goes off and uses httpservice to get XML to put int oan array collection. I then use it, and if the user makes a bunch of changes and them pushes a button to publish the changes, it uses httpservice to send the variables via POST back to a PHP script. Works great, except anytime AFTER the user presses publish if they happen to press the refresh button on the broswer I get:
[RPC Fault faultString="Error #1088: The markup in the document following the root element must be well-formed." faultCode="Client.CouldNotDecode" faultDetail="null"]
at mx.rpc.http::HTTPService/http://www.adobe.com/2006/flex/mx/internal::processResult()[C:\autobuild\3.2.0\frameworks\ projects\rpc\src\mx\rpc\http\HTTPService.as:924]
at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()[C:\autobuild\3.2.0\frameworks\ projects\rpc\src\mx\rpc\AbstractInvoker.as:188]
at mx.rpc::Responder/result()[C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx\rpc\Responde r.as:43]
at mx.rpc::AsyncRequest/acknowledge()[C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx\rpc\ AsyncRequest.as:74]
at DirectHTTPMessageResponder/completeHandler()[C:\autobuild\3.2.0\frameworks\projects\rpc\s rc\mx\messaging\channels\DirectHTTPChannel.as:403]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
Again, so long as the user avoids ever using the refresh button all is well. I"m using FLEX 3. Any understanding or reasoning would be really helpful.
Below are my HTTPService calls
This one is used to get XML data form the PHP script:
<mx:HTTPService id="XMLdb" url="http://10.101.50.60/get_config.php"
method="POST" showBusyCursor="true" resultFormat="e4x" result="phpresultHandler(event)"/>
This one is used to send back changes values with a key from the array collection:
<mx:HTTPService id="sendtophp" url="http://10.101.50.60/get_config.php" useProxy="false" method="POST">
    <mx:request xmlns="">
     <key>{keytoinsert}</key><value>{valuetoinsert}</value>
    </mx:request>
</mx:HTTPService>

Tried to reproduce your problem:
Created a PHP which spits out an XML. Read this from Flex Application
Created another PHP to do update an item on backend SQL database.
After pressing the publish button, I refresh in browser but see no errors.
Can you attach your flex/PHP source?

Unable to update database after delete table content

in my project i import .dmp file ..& create userto access database tables...but whn i deleet record from tab....it is deleted...but in actual proect database it not reflect remains as it is ....so wht shold i do
plz giv solution

992371 wrote:
in my project i import .dmp file ..& create userto access database tables...but whn i deleet record from tab....it is deleted...but in actual proect database it not reflect remains as it is ....so wht shold i do
plz giv solution[url https://forums.oracle.com/forums/message.jspa?messageID=10894779#10894779]duplicate post
Edited by: EdStevens on Mar 8, 2013 7:09 AM

Refresh database I need to automise the process

Hello All,
I need to automise the process of refreshing the database.
The scenario is:
I have one database intance and I need to copy the database to another instance every day.
How is the best way to do this?
Regards

There is a very simple way to do it, as most of the time these days, people want even reporting db into read-write mode for which depending on db size and transactions happening per day, you can consider replication too or other solution like log-shipping\db
mirroring if you have to have db in read - only mode.
Below ones are easy to follow if simple ways you want to follow, but first get smtp access for this server so that you can use alert for this.
Create a Sql Server job to add step by keeping below step A, then add step to wait for backup, copy files steps to be done, like wait T-sql command. Then add final restoration step.
A). Create a batch file wherein you will be calling first job using osql.
B). Create a batch file wherein you will be calling restore job using osql.
1. Create and disable Sql Server Job to backup database. It shd have steps like backup, old files removal, success and failure alerts. Add step to call to Robocopy job for copy backup files.
2. Create and disable Robocopy backup file copy job to copy backup file to required server again with all options like copy just latest files, enable logging for copy. Add dos command to alert in case of success and failure message. This shd be one db at
a time so that error and success message can be handled properly. Once copy of file is done then move the backup files to archive folder. Again maintain some retention for all folders where you keep backup files.
3. Create and disable restore job on required server. Add steps like first kill all session for this db, bring db into single user mode, restore backup db, bring db into multi user mode, add any logins, fix required orphan users{If sql server 2012 use contained
db to carry on logins and password}, shrink log files to remove unwanted log space, success and failure accordingly. Once backup file gets restored then move the backup files to archive folder, so that by mistake also, nobody shd be able to restore it.
Thanks,
Santosh Singh

Unable to download application. It stop at the half way then show the message retry or done.

It keep show the mssg cant download right in this time thn gt two option retry or done. Usually retry won't fix it.if press done the app stay in grey . Unable to play.

How did you manage to update to 5.0.1? The current iOS is 6.1.3, and there is no supported method to update to a lower version.
Jailbroken iPhones are not supported here.

LOV Refresh based on the business rule

My requirement is to refresh the LOV based on a value selected in another LOV. Say the LOV required to be refreshed as LOV2 and the LOV in which the value is selected and which triggers the LOV2 refresh is LOV1. Both the attributes of LOV1 and LOV2 are present in the same VO. Lets say attribute A1 for LOV1 and A2 for LOV2. The VA for LOV2 is present at EO Level and there are 2 view criteria and 4 bind variables in this view accessor. 3 of the bind variables are assigned values at the EO level by calling get method of another EO. For the value selected in LOV1 (i.e. it displays values of the attribute present in UI Hints of View Accessor) the corresponding attribute value present in the VO is required and that should be passed to the bind variable so that the query gets executed for LOV2 and LOV2 gets refreshed.
The few constraints which I have here is
1. View Accessor of LOV2 cannot be written at VO Level because 3bind variables should be set at the EO level as there is an association present
2. VA Override is not permissible as it throws an error because other bind variables are set at the EO Level
3. I can have a value change listener and pick the attribute Value when the user selects it and store in a page flow scope. But this value is the UI Hints value (which is displayed in the UI ) , I require the corresponding attribute value of this UI Hints attribute value being displayed.
4. I was not able to use a view link for this scenario because I've to use a DECODE functionality in where clause.

Hi Gary,
You can have try by using following tab :
The table CRMD_ORDER_INDEX: Contains GUIDs of all the transactions in CRM. Also provides a link to connect Business Partner with the CRM Transaction (Contains Header as well as Item details for a Business Transaction.Note: This table can be used for search based on the Partner No ).
Hope this will help you
Regards,
Arjun
<b>Reward points if it helps</b>

Unable to access Business Rules Facts after refreshing XML Facts

I have created a business rule using an xml schema to generate the XML Facts. Then I created a Decision Function to call a Ruleset to process the information in the XML Facts. This decision function has input and ouput parameters from the XML Facts.
The decision function is used inside a BPEL Process, by defining the Dictionary has the created business, defined the Service has de Decision Service. After this configuration I'm able to define the Input Facts and Output Facts from and to a variable in the bpel process. Using the Decision Fact Map window I define the input and output to the exposed Business Rule Facts. This works just fine. The BPEL runs and the Rules are correctly used.
When I change my xml schema to add more elements and complex types I use the "Reload XML Facts From Updated Schemas" option available in the bussiness rule. After this operation I will no longer have access to the Bussiness Rule Facts in the Decision Fact Map window. So I'm no longer able to call the decision function.
Yet the business rule has no problems and i have tested using a fuction to call the Decision Function.
Is this a bug or a feature?
I'm using Oracle 11g with the SOA Composite Editor 11.1.1.0.0.52.19.

Problem solved. There was an element in the xml schema that had nillable = true. Because of this the XML Fact for that element would no longer be available in the BPEL Process. Removing the nillable and generating the XML Facts again solved the missing variable problem.

Unable to refresh from profile

When I attempt to connect a Solaris 10 Update 4 client to my Sun iPlanet Directory Server 5.2 LDAP server, using the following configuration:
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_SERVERS= 172.16.20.200
NS_LDAP_SEARCH_BASEDN= ou=SciDevGrid,dc=c-noofs.gc.ca
NS_LDAP_AUTH= simple;sasl/DIGEST-MD5
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= sub
NS_LDAP_SEARCH_TIME= 15
NS_LDAP_CACHETTL= 86400
NS_LDAP_PROFILE= SciDevGrid
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=People,ou=Default,dc=c-noofs.gc.ca
NS_LDAP_SERVICE_SEARCH_DESC= group:ou=group,ou=Default,dc=c-noofs.gc.ca
NS_LDAP_BIND_TIME= 10
It works fine, and all information the client needs from the server is fully accessible. I can log in as an LDAP user, and the hosts table and automounter are updated properly. However, I receive this error message in the messages log when ldap_cachemgr tries to update the profile:
Aug 26 11:32:57 CNOOFS01 ldap_cachemgr[21216]: [ID 722288 daemon.error] Error: Unable to refresh from profile:SciDevGrid. (error=2)
The cachemgr log file (/var/ldap/cachemgr.log) shows:
Tue Aug 26 11:32:57.7150 Starting ldap_cachemgr, logfile /var/ldap/cachemgr.log
Tue Aug 26 11:32:57.7262 sig_ok_to_exit(): parent exiting...
Tue Aug 26 11:32:57.7344 Error: Unable to refresh from profile SciDevGrid (error=2)
Tue Aug 26 11:32:57.7344 Error: Unable to update from profile
The SciDevGrid profile in the LDAP server (cn=SciDevGrid,ou=profile,dc=c-noofs.gc.ca) has the following configuration:
(the passwd and group ou's are inherited from the default profile via serviceSearchDescriptor entries)
cn = SciDevGrid
authenticationMethod = simple;sasl/DIGEST-MD5
bindTimeLimit = 10
credentialLevel = proxy
defaultSearchBase = ou=SciDevGrid,dc=c-noofs.gc.ca
defaultSearchScope = sub
defaultServerList = 172.16.20.200
followReferrals = false
objectClass = DUAConfigProfile
objectClass = top
profileTTL = 86400
searchTimeLimit = 15
serviceSearchDescriptor = passwd:ou=People,ou=Default,dc=c-noofs.gc.ca
serviceSearchDescriptor = group:ou=group,ou=Default,dc=c-noofs.gc.ca
If I go into the LDAP server and modify the SciDevGrid profile to give defaultSearchBase the value "dc=c-noofs.gc.ca", the cachemgr error messages will stop. That leads me to believe this is a configuration problem. Has anyone run across this problem before?
Basically, what I am trying to achieve is a "default" profile which contains users and groups which apply to all LDAP-connected machines. Other profiles will inherit these attributes from the default profile, while providing additional configuration (automount maps and host table) specific to each compute grid we have.
Thanks in advance for any advice you can provide,
Adam Lundrigan
UNIX SysAdmin, C-NOOFS project
Biological and Physical Oceanography Section, Science Branch
Department of Fisheries and Oceans Canada
[email protected]
Edited by: C-NOOFS on 27-Aug-2008 9:48 AM

I am having the same issue. Does anybody can help?

Unable to refresh database after forced stop of the business rule

Similar Messages

Maybe you are looking for