Unable to refresh from profile

When I attempt to connect a Solaris 10 Update 4 client to my Sun iPlanet Directory Server 5.2 LDAP server, using the following configuration:
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_SERVERS= 172.16.20.200
NS_LDAP_SEARCH_BASEDN= ou=SciDevGrid,dc=c-noofs.gc.ca
NS_LDAP_AUTH= simple;sasl/DIGEST-MD5
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= sub
NS_LDAP_SEARCH_TIME= 15
NS_LDAP_CACHETTL= 86400
NS_LDAP_PROFILE= SciDevGrid
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=People,ou=Default,dc=c-noofs.gc.ca
NS_LDAP_SERVICE_SEARCH_DESC= group:ou=group,ou=Default,dc=c-noofs.gc.ca
NS_LDAP_BIND_TIME= 10
It works fine, and all information the client needs from the server is fully accessible. I can log in as an LDAP user, and the hosts table and automounter are updated properly. However, I receive this error message in the messages log when ldap_cachemgr tries to update the profile:
Aug 26 11:32:57 CNOOFS01 ldap_cachemgr[21216]: [ID 722288 daemon.error] Error: Unable to refresh from profile:SciDevGrid. (error=2)
The cachemgr log file (/var/ldap/cachemgr.log) shows:
Tue Aug 26 11:32:57.7150 Starting ldap_cachemgr, logfile /var/ldap/cachemgr.log
Tue Aug 26 11:32:57.7262 sig_ok_to_exit(): parent exiting...
Tue Aug 26 11:32:57.7344 Error: Unable to refresh from profile SciDevGrid (error=2)
Tue Aug 26 11:32:57.7344 Error: Unable to update from profile
The SciDevGrid profile in the LDAP server (cn=SciDevGrid,ou=profile,dc=c-noofs.gc.ca) has the following configuration:
(the passwd and group ou's are inherited from the default profile via serviceSearchDescriptor entries)
cn = SciDevGrid
authenticationMethod = simple;sasl/DIGEST-MD5
bindTimeLimit = 10
credentialLevel = proxy
defaultSearchBase = ou=SciDevGrid,dc=c-noofs.gc.ca
defaultSearchScope = sub
defaultServerList = 172.16.20.200
followReferrals = false
objectClass = DUAConfigProfile
objectClass = top
profileTTL = 86400
searchTimeLimit = 15
serviceSearchDescriptor = passwd:ou=People,ou=Default,dc=c-noofs.gc.ca
serviceSearchDescriptor = group:ou=group,ou=Default,dc=c-noofs.gc.ca
If I go into the LDAP server and modify the SciDevGrid profile to give defaultSearchBase the value "dc=c-noofs.gc.ca", the cachemgr error messages will stop. That leads me to believe this is a configuration problem. Has anyone run across this problem before?
Basically, what I am trying to achieve is a "default" profile which contains users and groups which apply to all LDAP-connected machines. Other profiles will inherit these attributes from the default profile, while providing additional configuration (automount maps and host table) specific to each compute grid we have.
Thanks in advance for any advice you can provide,
Adam Lundrigan
UNIX SysAdmin, C-NOOFS project
Biological and Physical Oceanography Section, Science Branch
Department of Fisheries and Oceans Canada
[email protected]
Edited by: C-NOOFS on 27-Aug-2008 9:48 AM

I am having the same issue. Does anybody can help?

Similar Messages

Unable to refresh config from controller

After migrating the data from CPI 2.1 to 2.2, I am unable to refresh the config from controllers that are on version 7.0.220.0. I am able to refresh on the contrlollers that run on version 7.4 and 7.6 successfully. I checked the compatibiliy metrix and 7.0.220.0 is listed as a supported verison on CPI 2.2.
I open up a TAC but they have been struggling with this for the past 3 weeks now.
Please advice what could be the issue. Thank you.
Phil.

Hi. I had this same issue with 9.2. I found that there was a user which was no longer in the AD that was still in planning.
First thing to check is can you see the users in SS - I suspect not but worth a look. If you can, deprovision them. If you cant (most likely) you will need to use an LDAP browser to clean them out, which is a very messy process.
Best of luck.
Sean

Unable to refresh filters from planning desktop(9.2.x)

Hi
i am unable to refresh filters from planning desktop.ie when a refresh is performed i get a popup with alist of users for which the filters didnt get updated and also the application goes into locked state.
I feel this is mainly due to the existence of stale users on planning desktop.Is there any workaround,query or patch to remove the stale users(users not existing in msad) from planning desktop such that the refresh takes palce properly.
Waiting for a quick reply
Thanks and regards
krishnatilak

Hi. I had this same issue with 9.2. I found that there was a user which was no longer in the AD that was still in planning.
First thing to check is can you see the users in SS - I suspect not but worth a look. If you can, deprovision them. If you cant (most likely) you will need to use an LDAP browser to clean them out, which is a very messy process.
Best of luck.
Sean

Unable to start User Profile Sync Service

Hi,
I am currently facing some issues with starting the User Profile Sync Service on my SP2013 farm.. I was wondering if someone could help me out a bit.
I have successfully installed the SP2013 farm on a environment that has access to our AD etc. and I have also
restored the database from SP2007 and converted it to Claims authentication etc. The one thing I can’t get to work is to enable the User Profile Sync Service on the server. I have checked quite a bit of TechNet blogs and other sites and tried almost everything
suggested but it still fails. I’ve also recreated the farm from scratch yesterday again but no luck still
L.
The below is what I have done:
Farm Admin account – spadmin2013 is local admin on all SP Farm servers (2 WFE and 2 APP Servers) and has log on locally rights as well on security policy. On the SQL DB it has dbo permissions on the Sync, Profile and Social DB’s.
Farm Service account – spservice-s is a managed farm account that is used to run the various services of the farm (used during the config wizard part).
From within the Admin Control Panel I have verified the managed accounts and it is indeed spadmin2013 which owns the User Profile Sync Service (not the application itself). When I try to start the service it tries to do that for 5-10 minutes and then fails
and goes back to stop and I do not see any error. I have created a custom service application with new database that runs on spadmin2013/spfarm/ldap accounts etc. I can see from the Windows services – FIM and FIMSync service try to start using the spadmin2013
and then go back to disabled. I have also tried giving the spadmin2013 rights to replicate the AD as few blogs suggested that. I am not sure where this is going wrong or what is missing. I had successfully got this to work and still can get it to work on my
first SP2013 server which is a standalone – running SQL, SP app and WFE on the same box.
In fact I also tried to activate this service first before I joined my 3 other servers to the farm and had no luck. I am kinda lost here as to what is going on!

Right. i ran a new log as suggested. I have also cleared the config cache and created a Powershell profile as suggested in this link - http://blogs.msdn.com/b/bryanbolling/archive/2014/01/02/unable-to-start-user-profile-synchronization-service.aspx
I checked the ULS Logs and i can see the below error -
ILM Configuration: Validating account.
ILM Configuration: Validating the system groups
ILM Configuration: Setting up WMI
ILM Configuration: Setting required permissions
ILM Configuration: Create install config file
ILM Configuration: Update source project
ILM Configuration: Changing service account credentials
ILM Configuration: Setting policy for service account
Updating SPPersistedObject UserProfileApplication Name=User Profile Sync Service. Version: 63903 Ensure: False, HashCode: 55647834, Id: ef1ec55c-aa15-4cb7-a9fe-498382a88b4e, Stack:
at Microsoft.Office.Server.Administration.UserProfileApplication.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance)
at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
SQL connection time: 131.92704 for Data Source=SPSQLAGL;Initial Catalog="Sync DB";Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name="SharePoint[OWSTIMER][1][Sync DB]"
ILM Configuration: Configuring database
ILM Configuration: Error 'ERR_CONFIG_DB'
UserProfileApplication.SynchronizeMIIS: Failed to configure MIIS post database, will attempt during next rerun. Exception: System.Configuration.ConfigurationErrorsException: ERR_CONFIG_DB
at Microsoft.Office.Server.UserProfiles.Synchronization.ILMPostSetupConfiguration.ValidateConfigurationResult(UInt32 result)
at Microsoft.Office.Server.UserProfiles.Synchronization.ILMPostSetupConfiguration.ConfigureMiisStage2()
at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance).
UserProfileApplication.SynchronizeMIIS: End setup for 'User Profile Sync Service'.
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 63899 Ensure: False, HashCode: 36296732, Id: 7aeb377f-8bd1-453d-b6be-6a373eaf350d, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Leaving Monitored Scope (Timer Job ProfileSynchronizationSetupJob). Execution Time=6041.65717333333
Name=Timer Job User Profile Sync Service_ProfileSynchronizationJob
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: -1 Ensure: False, HashCode: 13918585, Id: 21e01df1-8772-487d-bd56-f699b3912bda, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.StartSynchronizationServiceSetupTimer(String strSyncMachineAddress)
at Microsoft.Office.Server.Administration.UserProfileApplication.SynchronizeMIIS()
at Microsoft.Office.Server.Administration.ILMProfileSynchronizationJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 63913 Ensure: False, HashCode: 13918585, Id: 21e01df1-8772-487d-bd56-f699b3912bda, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.StartSynchronizationServiceSetupTimer(String strSyncMachineAddress)
at Microsoft.Office.Server.Administration.UserProfileApplication.SynchronizeMIIS()
at Microsoft.Office.Server.Administration.ILMProfileSynchronizationJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
I have verified the spadmin2013 does have dbo permissions and also is part of security & sysadmin in sql server. I run SQL 2012 with SP1

Why am I unable to update from firefox 4.0.1 on mac osX 10.6.8 when my Mac meets the requirements?

I have a Mac OSX (10.6.8) with an 2.8 GHz Intel Core i7 Processor, 16GB 1067 MHz DDR3 memory and 2TB hard drive.
Yet I am unable to upgrade from FireFox version 4.0.1
I can no longer access my YouTube account, and other websites, because I am told the FireFox version I am running is not compatible.
Why am I unable to upgrade to the latest version of FireFox?
Do you just not want Mac owners to run your browser? It seems this is the case as this has been an ongoing issue that should have been resolved already.

Firefox 4 versions and later '''do not run on a PowerPC Mac''' and require at least OS X 10.5 and '''an Intel Mac'''.
[http://www.mozilla.org/en-US/firefox/10.0.2/system-requirements/ Firefox 10.0.2 System Requirements]
The latest version for your ppc mac is 3.6.27 you can download from here:
http://www.mozilla.org/en-US/firefox/all-older.html
[http://www.mozilla.org/en-US/firefox/3.6/system-requirements/ Firefox 3.6 System Requirements]
1. Download a new copy of the Firefox program(3.6.27) from the above link
2. Trash the current Firefox application to do a clean (re-)install.
3. Install the new version that you have downloaded(3.6.27).
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
see also: [https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Mac Installing Firefox on Mac]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

USER UNABLE TO REFRESH DISCOVERER REPORT IN DISCOVERER DESKTOP 10g

Dear All,
HELP!!!
A new user is unable to refresh discoverer Reports in Desktop. All priviledges have been granted to username in Disco Admin and Usre is able to log into oracle Apps.
On the PC the user logged into someone else can log into Discoverer Desktop and run/refresh discoverer reports without any issues. Hence Ithink neither the PC nor the Discoverer installation is the problem.
Can anyone help? What setup/profile needs to be completed in order for the user to be able to run Disco reports.
Pls note that the following has been completed:
1. Business Areas Assigned to user and his responsibilities.
2. Desktop/Plus Privileges assigned.
3. Allow administration - DISABLED - NOT TICKED
Many thx
DI

Does this person just need to run reports? Or does this person also need to create reports? If the person just needs to run reports, try using Viewer for that person, rather than Desktop. This may be something that you need to log a service request with Oracle to get resolved. Pretty strange that can bring items into a new worksheet, but it won't run. Maybe there is an Oracle applications security issue (since logging in as another person does work)? You may be beating your brains out trying to find a Discoverer problem when it might be an application security problem. Though this is a wild guess on my part.
John Dickey

Unable to refresh a report in P21 Activant

We recently upgraded our Activant P21 (Prophet 21) software which includes Crystal Reports. Standard P21 canned reports in their software can be viewed, exported and printed. The P21 software includes a feature to create and link custom reports. We create the custom reports with Crystal Reports 2008 and set up the external report links. We can open, view, print and export the custom reports but when we refresh the report with or without an input parameters, we are prompted for a "Database Login" password. When we enter our password, an error message titled "Crystal Report Windows Forms Viewer" states "Logon Failed. Please try again". We have contacted Activant about this issue and they do not find any errors in the set up. They have told us there is probably an issue with Crystal Reports and asked us to contact your company. We have also contacted a friendly competitor who uses the same Activant P21 software and create custom reports with Crystal Reports 2008 which include user input parameters. Their custom reports work without a glitch. What would prevent us from refreshing a custom Crystal report?

Hi Don,
Activant P21 is insisting our issue is a Crystal problem. We are unable to refresh the reports inside their software. We have tried every user id and password we know and it still will not refresh our CR report.
When we use CR2008 to refresh a report, a window opens titled "OLE DB (ADO)" and asks to choose a data source "ODBC Data Source....Choose a data source from the list" We select our ODBC DSN: P21 Live and click next. Another window opens titled "OLD DB (ADO) asking for a password "Connection Information...Provide necessary information to log on to the chosen data source." At this point it does not matter what "User ID" or "Password" we use, the report will refresh. We have used the Adminstrator with a password, we used my user name and password and we used the administrator without a password and in all three instances, the report refreshed with the correct data.
I don't see how this is a Crystal problem unless there is something I am missing. Any help you can provide will be deeply appreciated.
Bob

I have an e trade site and I get a error message on my main page. "unable to refresh chart"

My site is written below and. Error message says
"unable to refresh chart"
http://www.ngkbujimarket.com/index.php
I need your helps
Thanks

Make sure that you do not block cookies from that website.
* https://support.mozilla.com/kb/Cookies
* https://support.mozilla.com/kb/Enabling+and+disabling+cookies
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Unable to open SYSTEM PROFILER

Hi all,
I updated my software to 10.5.8.
Since then i'm unable to open system profiler.
Tried using the:
a) option button > then click system profiler
b) spotlight
c) apple logo > abt this mac>
Please help.
Many thanks in advance

HI,
Try deleting this file.
com.apple.systemprofiler.plist
~/Library/Preferences.
Move that file to the Trash then try to launch the System Profiler.
If that doesn't work you could perform an Archive & Install which would reinstall a new copy of the Mac OS X for you which would install the System Profiler app.
As with any installation, make sure and back up all important data first.
http://support.apple.com/kb/HT1545
Then repair disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Powerpivot for sharepoint error: Unable to refresh data for a data connection in the workbook

Hello,
I have three errors when i try to use a simple powerpivot workbook published in sharepoint: (nothing on google has help me..)
1-Unable to refresh data for a data connection in the workbook.
Try again or contact your system administrator. The following connections failed to refresh:
PowerPivot Data
2-The embedded PowerPivot data in the workbook cannot be loaded due to a version mismatch
3-01/21/2012 17:26:47.08 w3wp.exe (0x1950) 0x0AD0 Excel Services Application Excel
Calculation Services bccc Medium Session.HandleTrimmedWorkbookReloading: userOperation ApplySlicerSelectionOperation requires BaseWorkbook: "http://crm2011:2020/Marketing%20Reports/test2_excel32bits.xlsx"
[0x409] [Saturday, 21 January 2012 09:40:18] [BaseWB ID: 2] to be untrimmed if it is currently trimmed. The workbook is currently NOT trimmed. fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.08 w3wp.exe (0x1950) 0x0AD0 Excel Services Application Excel Calculation
Services f1va Medium CWorkbookWrapper::CWorkbookWrapper: Created with ID=4 fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.09 w3wp.exe (0x1950) 0x0AD0 Excel Services Application Excel Calculation
Services eq3r Medium ConnectionRequest.ConnectionRequest: New connection request. SessionId=1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
WorkbookVersion=ConnectionInfo.WorkbookVersion: Uri=http://crm2011:2020/Marketing Reports/test2_excel32bits.xlsx, Version=Saturday, 21 January 2012 09:40:18 fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12 w3wp.exe (0x1950) 0x0AD0 Excel Services Application Excel Calculation
Services aysl Medium Succeeded to initialize a chart. fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12 w3wp.exe (0x1950) 0x0AD0 Excel Services Application Excel Calculation
Services 8xk9 Medium ExternalSource.ExecuteOperation: We exhausted all available connection information. Exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException: Exception of type
'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException' was thrown. at Microsoft.Office.Excel.Server.CalculationServer.ConnectionInfoManager.GetConnectionInfo(Request request, String externalSourceName, Int32
externalSourceIndex, Boolean& shouldReportFailure) at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.ExecuteOperation(Request request, ExternalSourceStateInfo externalSourceStateInfo, ExternalSourceStateInfo prevExternalSourceStateInfo,
Int32 index, ConnectionInfoManager connectionInfoManager, ExternalDataScenario scenario, DataOperation dataOpe... fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12* w3wp.exe (0x1950) 0x0AD0 Excel Services Application Excel Calculation
Services 8xk9 Medium ...ration, Boolean verifyPreOperationConnection), Data Connection Name: PowerPivot Data, SessionId: 1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
UserId: 0#.w|contoso\manager fb614a65-e398-4b97-a98d-fb7b23eab39f
My server and client olap versions are the same: MSOLAP.5, i used sql server 2008 R2 SP1 and sharepoint 2010 SP1 and reboot or iisreset have no effect
Thanks in advance for your help

Hello Challen Fu
I would be so grateful if you could please help me out
I have been trying to find a solution to the same error message
In my case, the power pivot reports were working before on a regular team site , but then two things changed:
a) I created a toplevel site using the BI Center template. Now I am using a Business Intelligence template , created a power pivot gallery library and uploaded a few powerpivot reports
b) On the backend, the database instance was upgrated to SQL Server 2012
 Front end Server VDSP01 remains SQL Server 2008 R 2 where Sharepoint 2010 was installed as a FARM
Now, the reports will display in sharepoing however they will not refresh. the error message i get is the same.
Scenario recap:
a- Server VDSP01 uses SQL Server 2008 R 2 where Sharepoint 2010 was installed as a FARM
b- On the back end, the database instance name was replaced with SQL 2012 Server:
 from SQL Server 2008 R 2 (instance DBDEV-COTS\COTS)
 to SQL Server 2012 ( instance VTSQL01\COTS)
c- I was told that:
 From VDSP01, they ran
CliConfg.exe to create SQL Server Alias :
 where BEFORE: vdsharepoint --> DBDEV-COTS\COTS
 and AFTER : vdsharepoint --> VTSQL01\COTS
I appreciate in advance any help you can provide<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
<v:stroke joinstyle="miter">
 <v:formulas> <v:f eqn="if lineDrawn pixelLineWidth 0">
 <v:f eqn="sum @0 1 0">
 <v:f eqn="sum 0 0 @1">
 <v:f eqn="prod @2 1 2">
 <v:f eqn="prod @3 21600 pixelWidth">
 <v:f eqn="prod @3 21600 pixelHeight">
 <v:f eqn="sum @0 0 1">
 <v:f eqn="prod @6 1 2">
 <v:f eqn="prod @7 21600 pixelWidth">
 <v:f eqn="sum @8 21600 0">
 <v:f eqn="prod @7 21600 pixelHeight">
<v:f eqn="sum @10 21600 0">
</v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
<o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype> <v:shape alt="" id="Picture_x0020_2" o:spid="_x0000_i1025" style="width:630pt;height:475.5pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\wlarange\AppData\Local\Temp\msohtmlclip1\01\clip_image001.jpg">
</v:imagedata></v:shape>
wanda larangeira

QAS Refresh from PRD

Dear Bhudev/Guest,
I am Planning to refresh my Quality system from Production's Offline Database Backup. I have seen you a lot posts.
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Refresh from Offline backup (AQC from APC)
Let's say AQC is quality and APC is production.
Pre-processing Activity:
Verifications:
1. Verify the last offline backup in the source system /oracle//sapbackup/back.log
2. Verify that both the source and target systems are at the same Oracle level (which is already the case between APC and AQC)
3. It is recommended that an off-line backup be taken of the target system before starting this process, in case of fall back.
4. Confirm there is enough space in the target (AQC) file systems to contain the data from the source system this is required as we may have to copy the files from Production to quality. /oracle/SID/sapdata* folders should be having little more space as compared to the source filesystem.
5. Check access to SAP* for APC (000 and 400) and also for AQC (000 and 400)
6. Check other passwords such as adm and ora
7. Server : User : ora > sqlplus u201C/ as sysdbau201D > alter database backup controlfile to trace > exit In /oracle/SID/saptrace/usertrace, the last trace (check the time) is the script for recreating the control file. You will need to edit it. Please rename the trace file to ld.sql and send the file to the target system /oracle/SID Edit the Script: vi ld.sql Delete or comment out all lines at the beginning of the file before STARTUP NOMOUNT which is kept. Change old controlfile creation statement at the beginnig of the controlfile: Old line: create controlfile reuse database NOresetlogs archivelog; change to New line: create controlfile set database resetlogs archivelog; replace all occurences of string by in each line where appears :g / / s / / /g example: :g/P10/s/P10/T21/g Delete the following lines a the end of the script: ; RECOVER DATABASE; ALTER SYSTEM ARCHIVE LOG ALL; ALTER DATABASE OPEN;
8. Get from the Prod system (APC) the .aff and backDPR.log and copy them on AQC. (/oracle//sapbackup) Copy the files to /instkits/SID/. And after we can go on target source server and copy them from /instkits/SID to the /oracle/SID/sapbackup/. With the good owner and permission
9. Lock all the users in client 400 except Basis and post system message. Target system data collection (On AQC -400):
1. SM59 Expand all the trees, print by choosing: ->System ->List ->Print i) Compare list to R/3 connections on source system. Record details for any that will need to be recreated on target system.
2. SCC4 Record all client settings. -> Tableview ->Print ->Standard List -> List -> Print Make sure you understand the columnsu2026
3. SE06 Record system change options
4. RZ10 Record the instance profile settings for: rdisp/wp-no-btc and rdisp/max_wprun_time
5. STMS Record current transport routes. ->Overview -> Transport Routes -> manually expand all trees -> system ->list ->print
6. Request customer to provide u201Ccatch-upu201D list of transports to be applied to system after refresh (QA and Sandbox systems).
7. RZ04 Record current work process set-up. Highlight each operation mode and click instances/op modes button. i) Print with ->System ->List ->Print
8. SAP License Ensure the SAP license information is available. If not on-hand, logon target system as adm and enter command: saplicense u2013show. This information is also available on OSS.
9. TSM Nodename View /usr/tivoli/tsm/client/api/bin64/dsm.sys on source and target system. Record the nodename entries. These will be SAP or server names.
11. Take printer Export through SPAD and save it locally to desktop->SPAD
12. Take Export of User Master from the client 400 through SCC8 target system is AQC , so that it may be re-imported through STMS. Note the Transport number here also verify the transport exist in the queue. DB Restore from offline backup from APC:
1. Stop SAP on AQC -> Login as aqcadm -> stopsap
2. Change the TSM node on AQC-> cd /usr/tivoli/tsm/client/api/bin64 ls -lrt vi /usr/tivoli/tsm/client/api/bin64/dsm.sys Change it to point to APC, comment the AQC Node. Post Restore Acitivity:
1. Stop Database Delete Old controlfile rm /oracle/AQC/sapdata1/system_1/cntrl/* rm /oracle/AQC/saparch/cntrl/* rm /oracle/AQC/origlogA/cntrl/*
2. Re-create the controlfile and then after that start the database User : ora > cd > sqlplus u201C/ as sysdbau201D > @ld.sql > alter database open resetlogs;
3. Change the sapr3 password Server : User : ora Temporarily, we have to change the sapr3 password to the default password. With SAPBA, change this user password to pass.
4. Test the connection: Server : User : adm > R3trans u2013d It should have a return code of 0000
5. Reasign tempfile alter tablespace psaptemp add tempfile '/oracle/AQC/sapdata1/temp_1/temp.data1' size 6020M reuse autoextend on next 20971520 maxsize 10000M; alter database rename global_name to AQC.WORLD; drop user OPS$APCADM cascade; drop user OPS$ORAAPC; create user OPS$ORAAQC identified externally default tablespace psapdnausr temporary tablespace psaptemp; grant connect, unlimited tablespace, SAPDBA to OPS$ORAAQC; grant connect, unlimited tablespace, SAPDBA to OPS$AQCADM;
7. Change the instance profile to stop all the background processing To be sure that no production batch are executing, set rdisp/wp_no_btc to 0 posprocessing:
8. Startsap
9. Run Transaction SICK (as sap*)
10. Installing license through the tcode: slicense While logged in as 000/sap/using password of APC system Get the License from service.sap.com and download it to local machine Log in 000 client using SAP and run the Tcode slicense import printers, run BDLS for logical system name conversions se06 posprocessing stms usermaster import import profiles for QAS
thanks
Bhudev
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Hi Pranav
why the SIDs of production and QAS are same, did you do refresh of QAS from PRD ?
If yes, then you should have done control file creation and change of SIDs, after the datbase restore...
however, if you want to create the new control file and change the SID then try to consider the following steps:
1. Login as orasid
2. connect to sqlplus
3. run query: alter database PRD backup controlfile to trace;
4. It will create a control file as a latest trace file (.trc) in the directory /oracle/PRD/saptrace/usertrace
note: logout of sqlplus
5. Rename that .trc file into ldQAS.sql
6. copy this file into /oracle/SID ie. /oracle/QAS directory
7. edit the .sql file as below
8. CREATE CONTROLFILE SET DATABASE u201CQASu201D RESETLOGS ARCHIVELOGS;
add above statement replacing the below:
CREATE CONTROLFILE REUSE DATABASE u201CQASu201D NORESETLOGS ARCHIVELOGS;
9. Replace all occurences of string <PRD_SAPsid> by <QAS_SAPsid> in each line where <source_SAPsid> appears
:g/PRD/s/PRD/QAS/g
10. login in sqlplus, stop database
11. as oraqas, delete old control files:
rm /oracle/SID/sapdata1/system_1/cntrl/*
rm /oracle/sid/saparch/cntrl/*
rm /oracle/SID/origlogA/cntrl/*
12. again login into sqlplus (as sysdba always)
13. run this .sql : @ldQAS.sql
note: it should give a message that control file creaated.
14. Open the database using: alter database open resetlogs;
15. alter database rename global_name to QAS.WORLD;
16. drop user OPS$PRDADM cascade;
17. drop user OPS$ORAPRD;
18. create user OPS$ORAQAS identified externally default tablespace <tablespacename>
temporary tablespace psaptemp;
19. grant connect, unlimited tablespace, SAPDBA to OPS$ORAQAS;
grant connect, unlimited tablespace, SAPDBA to OPS$QASADM;
at SAP level:
1. you can run BDLS to convert logicalsystems from PRD to QAS SID
Bhudev
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
In both post, There is some difference specially like User droping.
Whether I have to run BDLS or Drop usr and create or both activity have to be done?????
Regards
Dharmendra

Please explain step by step:-
7. Server : User : ora > sqlplus u201C/ as sysdbau201D > alter database backup controlfile to trace > exit
In /oracle/SID/saptrace/usertrace, the last trace (check the time) is the script for recreating the control file.
You will need to edit it. Please rename the trace file to ld.sql and send the file to the target system /oracle/SID
Edit the Script: vi ld.sql Delete or comment out all lines at the beginning of the file before STARTUP NOMOUNT which is kept.
Change old controlfile creation statement at the beginnig of the controlfile: Old line: create controlfile reuse database NOresetlogs archivelog; change to New line: create controlfile set database resetlogs archivelog; replace all occurences of string by in each line where appears :g / / s / / /g example: :g/P10/s/P10/T21/g Delete the following lines a the end of the script: ; RECOVER DATABASE; ALTER SYSTEM ARCHIVE LOG ALL; ALTER DATABASE OPEN;
8. Get from the Prod system (APC) the .aff and backDPR.log and copy them on AQC. (/oracle//sapbackup) Copy the files to /instkits/SID/. And after we can go on target source server and copy them from /instkits/SID to the /oracle/SID/sapbackup/. With the good owner and permission
Break into steps and explain. It looks confusing to me because I am new to ECC with Oracle.
Regards
Dharmendra

Problem: Stopping cluster due to unhandled exception .. Unable to refresh

Greetings
While testing a rolling upgrade of an application that uses Coherence 3.5.2 on 62-jvm cluster hosted on
11 physical machines, we encountered a situation where after the upgrade was completed, most jvms
in the system abruptly left the cluster. The physical hosts are running CentOS 5.4, the java used is
the 64-bit server version 1.6.0_16-b01. The test was run under a scenario that imposed "moderate"
load, with cpu usage on the physical machines never exceeding 60% busy, network bandwidth never
exceeding 5%, and with some free physical memory. Swapping did not occur during any time during
the test. I believe we are using the default tangosol-coherence.xml. We got the error below in
our coherence.log files on all of the systems, all at about the same time (within 10 milliseconds).
55 of the jvms left the cluster during the incident. There were 55 copies of the error message in
the various logs, all nearly identical except for the time and member id.
My questions include
- what does the error mean?
- what could cause it? (I investigated system logs, and found no evidence of the NIC cards
going off line at the time. Any suggestions about how to look for evidence of broadcast storm?)
- how can we keep it from happening again?
Many thanks for your help -
Mike Murphy
2011-04-26 17:34:14,629 Coherence Logger@9224544 3.5.2/463 ERROR 2011-04-26 17:34:14.629/1929.311 Oracle Coherence GE
3.5.2/463 <Error> (thread=PacketListenerN, member=30): Stopping cluster due to unhandled exception: com.tangosol.net.mes
saging.ConnectionException: Unable to refresh sockets: [UnicastUdpSocket{State=STATE_OPEN, address:port=10.48.88.116:809
1}, MulticastUdpSocket{State=STATE_OPEN, address:port=224.3.5.2:10013, InterfaceAddress=10.48.88.116, TimeToLive=4}, Tcp
SocketAccepter{State=STATE_OPEN, ServerSocket=10.48.88.116:8091}]; last failed socket: MulticastUdpSocket{State=STATE_OP
EN, address:port=224.3.5.2:10013, InterfaceAddress=10.48.88.116, TimeToLive=4}
at com.tangosol.coherence.component.net.Cluster$SocketManager.refreshSockets(Cluster.CDB:91)
at com.tangosol.coherence.component.net.Cluster$SocketManager$MulticastUdpSocket.onInterruptedIOException(Cluste
r.CDB:9)
at com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:33)
at com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketLis
tener.CDB:19)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.net.SocketTimeoutException: Receive timed out
at java.net.PlainDatagramSocketImpl.receive0(Native Method)
at java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
at java.net.DatagramSocket.receive(DatagramSocket.java:712)
at com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
at com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketLis
tener.CDB:19)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)

Hi Mike,
It looks like you are having problems with multicast. You can run the multicast test described here
[http://download.oracle.com/docs/cd/E15357_01/coh.360/e15723/tune_multigramtest.htm]
which will help in diagnosing the problem

Error in Cache Refresh(Unable to refresh cache contents)

Hi All,
When i am refreshing Cache from the browser using link CPACache/refresh?mode=full it says success.
When i do from SXI_CACHE it gives an error.
 Error during last attempt to refresh cache
 Unable to refresh cache contents
So when i run any schenario in message monitoring i get the following error-
SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>http response does not contain a valid XML root tag</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An error occurred when refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
I checked the INTEGRATION_DIRECTORY_HMI connection...
here the response which im getting is..
 HEADER NAME HEADER VALUE
response_line HTTP/1.0 200
server_protocol HTTP/1.0
status_code 200
status_reason
ragma no-cache
ache-control no-cache
ontent-type text/html
ontent-length 87
HTTP BODY
TITLE>Error</TITLE>#<BODY>#<H1>Error</H1>#FW-1 at nebula: Unknown WWW s
rver.</BODY>##
Time (ms) 17
I believe that is not the right response.
Everything was working fine yesterday when all of a sudden this error cropped up from no where.
Regards,
Rahul

Hi,
This is the error it shows there..
ERROR ID UPDATE
http response does not contain a valid XML root tag
Regards,
Rahul

CR 6.1 - Unable to locate lens profile automatically

Raw files from Canon camera are correctly identified and lens distortion is corrected automatically, but on jpgs from same camera I get this error: "unable to locate lens profile automatically".Can't even do it manually as lens profile that is available for raw file is missing from drop down menu on jpgs. Also weird because it does show some lens profiles in drop downs, just not the right one. But, again, right one is there for raw files. Weird!

That is because lens profiles for raw and non-raw are necessarily different and separate (like color profiles). We have more raw lens files available than non-raw lens profiles (e.g., Canon 70-200 lenses). As a general rule, I would encourage you to be applying lens corrections via profiles at the raw stage in CR, rather than to JPEGs/TIFFs (given a choice between the two), because of various technical advantages in the former case.
Eric

Users are unable to print from Adobe Reader X

Hi,
Multiple users in our environment report that they are unable to print from Adobe Reader X. They receive the following error messages (translated from Dutch) Document cannot be printed. There are no pages selected.
We are using Reader version 10.1.3
What we have tried to resolve the issue (without any positive results):
- Repair the installation of Adobe Reader.
- Update Adobe Reader to the latest version for Vista (x86) (10.1.7)
- Created new user profile for the affected users.
The documents can be printed without any errors from Foxit Reader.
At the moment we use the following workaround:
Open the document in Internet Explorer, and then print the document from there.
Does anyone have any idea how we can resolve this?
Best regards,
Duncan

James,
I'm sorry to hear that you were having the same problem under 9.5. I had recently updated to Adobe Reader 10 under Windows 7 and yesterday my "default printer" simply disappeared from the options on my control panel. I re-installed my printer, but today whenever I would open a PDF document and try to print it, the document would simply close with no further ado. After a bit of trial and error, I ended up uninstalling Adobe Reader 10 and going back to Adobe Reader 9.5. Now everything is working just fine.
nlncmjd

Unable to refresh from profile

Similar Messages

Maybe you are looking for