Unable to Run C Program using Xcode "Stop Executable"

Hi All
Have been using the Terminal to compile programs built through Xcode but now want to use Xcode itself. Everytime I press build and go it builds successfully but won't run. I found a tutorial that mentioned if you are using Xcode 3.0 (I am) you can't use build and run, for output, you have to go to run and then push console.Ok that works. I then found someone with the same issue as mine everytime you want to build and run it appears with another window saying "Stop Executable"They were told to make sure they were building the .c file in a project and not building it from a text editor and then importing. I always build new projects.
I want to interact with the program not just see its output? so my question is can I interact with programs i.e. User can enter data or strings or, do I have to build an interface to do this through Xcode. I Also forgotten to mention I found information through the forum that said to go to First Aid through utilities and repair file permissions, this has been done but still does not work. Many thanks for your time and as you can probably tell I am new to Xcode.

To run your command-line program in Xcode, open the debugger console by choosing Run > Console. Run your program by choosing Run > Run or Build > Build and Run. You'll have to build and run if you haven't compiled the program before. Your program will run, and you will see output in the console. You interact with the program from the console.
If you're not able to enter input in the console, choose Run > Sync with Debugger. If doing that doesn't work, you can run your program in the Terminal application by double-clicking the program from the Finder. It's less convenient than running it in Xcode, but you'll at least be able to run the program and interact with it.

Similar Messages

Unable to run Servlet program using J2EE SDK

Hello,
i am a newbie to all this j2ee stuff and servlets even.so the problem that i have maybe a very common one and i hope that most of you may have a fix to it...
i use J2EE SDK to compile and run Servlet programs.I have a Servlet program with the class name defined as
public class MyServlet extends HttpServlet ....
the file is stored as MyServlet.java
i set the CLASSPATH variable so that the required classes for the compilation of the program can be located.
the program compiles without any glitches.
However when i run the program by saying
java MyServlet
( i dont think its any different to run servlet code is it?)
i get the message
java.lang.NoClassDefFoundException:MyServlet
Can someone suggest a remedy?
thank you
-NDK

First, I don't understand what you are trying to do. Running a servlet ?
Servlets are ran by an application server ! (Apache Tomcat ....).
Second, is your class in any package ?

Xcode unabled to run any program (even Hello World default)

I've started into programming c++ and java in Osx (come from linux) and i've tried xcode (after trying netbeans, eclipse etc) because i find it the most comfortable IDE to work.
The problem comes when i download xcode on my own laptop, after the large download and installation (and few updates) i tried the basic Hello World program.
What is my surprise when, after building succesfully, i get no output at all outputs sections, but more surprised when i try to stop running the program and xcode doesn't respond.
I get this error with every program, doesnt matter which language.
I also have a crash when quitting xcode (it freezes and colored ballon pointer appears), so i have to force xcode quit.
Have anyone faced this issue before? or known whats the issue related with?
I'll really appreciate any help (as i can't program anything in osx if i want to use xcode)

From my Guest account it works perfectly.
How can I make it works on my Account ? Which preference file should I need to change.
Here is the message from the debugger
Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'Could not find a storyboard named 'Main' in bundle NSBundle </Users/USER/Library/Application Support/iPhone Simulator/7.1/Applications/A0D30F60-57F6-41C5-9EB0-E5FE46F50DB1/ToDoList.app> (loaded)'
Thank you for your help

Hw do u run java programs in xcode 4?

hw do u run java programs in xcode 4?
pls tell the detailed steps fr running a java program

Here is a document dated 2009: Introduction to Jar Bundler User Guide - Apple Developer
...I don't think JB is included now.

Compile and run java programs using batch file

i am using eclipse to run my java programs.How to compile and run those programs using a batch file?

a) just write a batch file, and add it to the project. When you want to run it, go to a command window and invoke it. (There is probably also a way to invoke it from Eclipse)
b) if the project is complicated, take a look at ant. Eclispe knows about ant files.

How to run c program without xcode

i want to run my c program without using Xcode coz its a huge download,plz help me out I'm new to mac

The Xcode install is worth the time and space (in my opinion). To enable the command line tools you have to also install those:
http://stackoverflow.com/questions/9329243/xcode-4-4-and-later-install-command-l ine-tools
The nice thing about using Xcode is that you will have the debugger and also be able to build executables for other platforms (cross compile) since Xcode allows you to use an external build system.
Here is another option... there are websites that allow you to compile and run code on the server side (through a web interface):
http://ideone.com/jwTjgN

Unable to run ADF Project Using with Jdev 10 and Weblogic server 9.2

Dear All,
I am unable to run ADF Project on Weblogic Server 9.2. I am created Sample Project with ADF Control. This was when we create jsp at that time i am selected libraries ADF. After created war file. This war i am deploying into Server. At that time i am getting error java.lang.noclassfound error.
so please tell me how we can run these application.
Regards,
Suresh.V

Hard to help you here. JDev 10 used to work with OAS 10g as application server. This does not mean that you can't use Weblogic9.2, but because it is not the default configuration you may have some problems doing this.
One problem is that you need to install the ADF runtime libraries in the WLS 9.2 server, but there is no installer I know of. You can try to deploy the needed libraries together with your app, but you have to figure out which libraries you need.
Next thing is that you should deploy an EAR instead of a WAR.
Timo

Running external program using java

hi
i am trying to run an external program using the runtime.exec() method. my problem is that the external program only runs when i press ctrl-c to exit my program. does anyone know how i can execute the external program while my program is still running without having to quit the program?should i be using threads?
thanks

As per the api doc exec will be executed as a seperate process
Process exec(String command) ------Executes the specified string command in a separate process.
Can you able to share that code what you have written ?

Running abap programs using the macros

In our DP implementation we have faced several issues in the extraction of the data from the demand planning to one of the legacy system. We have written the ABAP program and would be using the read planning book bapi. I wanted to run the ABAP program using the macro could some one please let me know what is the structure of the macro builder that is used to fire the ABAP program. this is being fired from the macros as some comparison is to be done to run the macro.

Hi,
Some more information on macro function
REPORT_SUBMIT()
REPORT_SUBMIT( 'program_name' ; <'job_name'> ; <'job_number'>; <'newmode'>) causes the specified program to be executed. Use the optional arguments, job name and job number, if you wish the program to run in the background. If you set the argument 'newmode', the results are displayed in a new window.
Hope this will helps you.
Regards,
Sunitha.

How to run the program using specific classpath

Recently I installed Javamail 1.2 and JAF1.0.1 on my NT Box and set up the classpath. I can compile my java email code by using: javac myEmail.java. But when I tried to run the code using java myEmail, it always gives the error: Exception in thread "main" java.lang.NoClassDefFoundError: myEmail.
when I use -verbose and found that it always goes to:
C:\Program Files\JavaSoft\JRE\1.3.1\lib\rt.jar to find classes even I use -cp option to point Javamail\mail.jar and activation.jar.
what is wrong with it? Thank you in advance!!!!!!

What does this have to do with JMS. I suggest that this should have been posted to the Java Programming forum where you would have gotten a quick response as this is a simple problem to diagnose.
The problem is that the class myEmail, which you created, is not on the class path so it cannot find it. It has nothing to do with the location of mail.jar and activation.jar, although this may cause problems later.
What you need to do is check the classpath in the environment variables section of the System dialog box. Make sure it refers to . (the current directory) as well as the locations of mail.jar and activation.jar. Also when you invoke myEmail ensure you are in the same directory.
Hope this helps

Running two programs using two screens

Hi, I have a 13” Mac Book Pro OSX 10.6.7 (2010) 2.26GHz 4GB I would like to work two programs using a second screen ie iTUNES on one screen and sound editing on the second. My second monitor is a 19” Toshiba HDTV that I can connect via the Mini display port to the HDMI on the monitor, is it possible for a third application by splitting one screen into 2. THXS

TXTJ wrote:
Hi, I have a 13” Mac Book Pro OSX 10.6.7 (2010) 2.26GHz 4GB I would like to work two programs using a second screen ie iTUNES on one screen and sound editing on the second. My second monitor is a 19” Toshiba HDTV that I can connect via the Mini display port to the HDMI on the monitor, is it possible for a third application by splitting one screen into 2. THXS
I don't know about a TV used as a monitor but when using a monitor as a second monitor you can do what you want. You set up the display in extended mode. Start one of your applications and drag it over to the second monitor. Start your other application and don't drag it to the second monitor. You then have an application running on each monitor.

Help! Running Fortran program with Xcode

Hi all,
I am developing a Fortran code for a class project, I understand Matlab, but very little of advanced programming like Fortran or C++, but have to learn some for my class (note: it is not a programming class). The professor gave us a code to run and modify it, the code is supposed to work (and in fact it is working on windows computers). I didn't know how to run Fortran on a mac so I followed the instructions given in these links:
http://www.macresearch.org/xcodegfortran_contest_winner_damienbobillot
http://lists.apple.com/archives/fortran-dev/2006/Mar/msg00011.html
I installed Xcode 2.4, and gfortran. After I made my Project on Xcode (following the links above), I clicked Build and it was successful, but after I clicked Build and Go I got the following error:
Warning:Array reference at (1) is out of bounds
Command/usr/local/bin/gfortran failed with exit code 1
I don't know what does that mean. Can anyone help me with this?
I would like some easy-to-follow instructions to run a Fortran program with Xcode, starting from the basics.
It is hard to find an easy compiler for mac, PC people have qFortran (for free at at school) and things like that where you just have to click compile and that is it.
Thanks!
lbml

I'd need to see your code to give details, but the error you got says you declared an array with a certain number of elements and then you tried to talk to the array outside those elements.
For example you say:
integer myArray(5)
and then try to index either myArray(0) or myArray (6).
Does that make sense. I have never tried to get fortran working with Xcode, but I did get Pascal working, so it is probably better is someone else helps you, but I will try if no one steps up.

Help! how to run other programs using java

how can i run other programs or exe files using java, anyone can give sample codes for this.
ex. if I click [run MsWord] button, then msWord automatically lunch

RunTime.getRuntime().exec(string command)
I guess, it might help you..java.lang.Runtime

How to send data to labview code at run time while using with (or executing the sequence)the teststand

Hello
I am new to the Teststand.
I am using labview8.0 with teststand 3.1
I have developed some labview codemodules as vi's without using the teststand utility library pallete
Now i have to run them in teststand.
While executing them(as a sequence) in teststand,i need to enter the data to the labview code at run time.For this labview front panel should appear as GUI or popup (while executing).Is it possible to do this without using teststand pallete.
or i need to change the code with teststand pallete(i think it is difficult now to change the code)
Plz provide a solution to this problem
Also one more,how and where to use the 'pass by reference' option
Thanks and Regards
Mudigondla

Hi,
see your other post http://forums.ni.com/ni/board/message?board.id=330&message.id=13914
Also, you can, specify to display the front panel of your VI when you specify your VI in your sequence file.
There are examples, for dialog panel using LabVIEW, in the examples folder of TestStand and on the NI Web Site.
Regards
Ray Farmer
Regards
Ray Farmer

How to run batch programs using SUBMIT command without any interaction need

Hello ABAP gurus,
I have created a batch program in SE38 which calls many other SE38 Programs (Reports).
I have used the command SUBMIT to call the sub programs. There are about 15 sub programs that this main batch program is calling.
It works fine, but after calling each subprogram it stops and I have to manually click on 'Back Button' in green on the sap screen to run the next program in the list. Like this I have to do 15 times to run all the programs in the batch.
Is there a way to avoid this manual intervention and make the program run all the sub programs on its own.
Your feedback will be highly appreciated.
Thanks
Ram

Thanks Sampath for the response.
Yes I am using the option "AND RETURN". So it is coming out of each sub program, and it is at this stage it waits for me to click on 'backward green arrow' to continue to the next.
Here is the code I have used
SUBMIT Z_AS_BI_F0005_EXTRACT WITH S_DATE IN S_DATE WITH P_TEST = 'N' AND RETURN.
SUBMIT Z_AS_BI_DIVISION_EXTRACT WITH S_DATE IN S_DATE WITH P_TEST = 'N' AND RETURN.
SUBMIT Z_AS_BI_COMPANY_EXTRACT WITH S_DATE IN S_DATE WITH P_TEST = 'N' AND RETURN.
SUBMIT Z_AS_BI_CUSTOMER_EXTRACT WITH S_DATE IN S_DATE WITH P_TEST = 'N' AND RETURN.
SUBMIT Z_AS_BI_BRANCH_EXTRACT WITH S_DATE IN S_DATE WITH P_TEST = 'N' AND RETURN.
SUBMIT Z_AS_BI_BUS_UNIT_EXTRACT WITH S_DATE IN S_DATE WITH P_TEST = 'N' AND RETURN.
SUBMIT Z_AS_BI_ADDRESS_EXTRACT WITH S_DATE IN S_DATE WITH P_TEST = 'N' AND RETURN.
SUBMIT Z_AS_BI_CUSTOMER_GROUP_EXTRACT WITH S_DATE IN S_DATE WITH P_TEST = 'N' AND RETURN.
SUBMIT Z_AS_BI_GROUP_EXTRACT WITH S_DATE IN S_DATE WITH P_TEST = 'N' AND RETURN.
SUBMIT Z_AS_BI_PMT_TERMS_EXTRACT WITH S_DATE IN S_DATE WITH P_TEST = 'N' AND RETURN.
SUBMIT Z_AS_BI_REGION_EXTRACT WITH S_DATE IN S_DATE WITH P_TEST = 'N' AND RETURN.
SUBMIT Z_AS_BI_TERRITORY_EXTRACT WITH S_DATE IN S_DATE WITH P_TEST = 'N' AND RETURN.
Any other suggestions or feedback will be appreciated.
Tks
Ram

Unable to Run C Program using Xcode "Stop Executable"

Similar Messages

Maybe you are looking for