Unable to run cmd:/usr/sbin/sysidput
Trying to load Solaris10 from a jumpstart server running Solaris 8. I keep getting the error Unable to run cmd: /usr/sbin/sysidput. It seems to have something to do with networking. Does anybody know what this error is or a workaround for it.
Well, i saw it in a Solaris 10 Beta, it should be fixed in the current version.
Do you have a sysidcfg file? If so, what does it point out as a primary interface? Maybe the primary interfaces specified in that file doesn't exists on the machine.
Othervise, check the /var/sadm/system/logs/sysidtool.log file (might be under /a/var/sadm/system/logs/sysidtool.log )
//Magnus
Similar Messages
-
Solaris 10 06/06 x86 install Unable to run cmd: /usr/sbin/sysidput
Hello,
When I install Solaris 10 06/06 on my x86 machine, I follow all of the prompts. Eventually , I get to a place in the X Windows GUI where I enter my IP, netmask, Router IP, DNS server IPs, domain, and search list.
I get an error at the end of th network configuration section.
runCmd error in /usr/sbin/sysidput with output:
Unable to run cmd: /usr/sbin/sysidput
No sysidcfg found.
I found my sysidcfg at /etc/sysidcfg. everytime I try to create a file or copy a file over to /usr/sbin. I get a read only error. I am logged in as root..
/etc is not my $PATH. Is that the problem? Do special commands exist to put it in the path?
Please help. I have not used UNIX in two years. I not know Solaris Administration.
Does a newer DVD exist with the fix already done?
Thank you very much.
Andre Mikulec
[email protected]This is a known issue. Do not configure the network at the time of OS installation. Select NON-Networked and continue,
Once you are done with the installation, run sys-unconfig and you will be able to configure the network.
-M -
Solaris10 install - unable to run cmd /usr/sbin/sysidput
I have an Ultra10 at home with Solaris9 on it now. Attempting to install Solaris10 from CDs. Boots up fine on first CD, then tries to configure hme0 and chokes. Gives me errors "Warning: hme0: fault detected in device; service degraded" and "Warning: hme0: No response from Ethernet network: link down --cable problem?"
I'm using a Linksys cable modem BEFCMU10 and Linksys cable router WRT54GS. Noticed it started doing this when I changed from old BEFSR41 router to new wireless router.
Well, I ignore this error and move on. Install process gathers info such as dhcp (yes, my router set up to do this), time zone and so forth. It processes my inputs and then gives me the error "unable to run cmd /usr/sbin/sysidput".
Anyone have either of these problems and resolve them successfully?
Thanks, RonHow do I enable this at install time from the CDs?Afraid the answer is likely burn a custom boot CD
after judicious tampering with the GA media-set - or -
read up on custom JumpStart installations (neither
are exactly for the faint hearted, both are probably
overkill).
Wondering if this is causing the other error "unable
to run cmd /usr/sbin/sysidput"?Could be a combination of a bug in the installer
triggered by primary netif down + DHCP network
parameter configuration selected.
Suggestion would be (as next poster suggests)
rebuild with node detached from LAN, and, with
static, dummy network parameters as workaround,
then post-install setup etc/system to work around
your switch's carrier-sense bogosity as per Sol9
as well as re-enable for DHCP.
It's probably also worth filing this as a bug if you
have a SunService contract; it wouldn't be the
first time one of OpenPROM, the install-time
mini-root, suninstall, or dhcpagent have shipped
with inbuilt "just don't do's".
IOTW - work around the problem, bug it with Sun
if it's reproducable, then get on with life. -
Jumpstart - Unable to run cmd: /usr/sbin/sysidput
I'm working on migrating my main NIS/Jumpstart server from Solaris 8 to Solaris 10. I've setup up a new Solaris 10 NIS/Jumpstart server for testing purposes while the Solaris 8 server is still in production.
Any time I try to install a client with this new Solaris 10 server, it blows up when it gets to the "Please wait while the system is configured with your settings..." window.
An Error dialog is displayed with the text "An error has occurred in configuring the system. Please go back and check your settings."
The console shows:
Completing system identification...
runCmd error in /usr/sbin/sysidput
Unable to run cmd: /usr/sbin/sysidput
General error, see /var/sadm/system/logs/sysidtool.logThe sysidtool.log doesn't show anything of any interest, so that's a dead-end.
Of course I've tried changing all the settings, getting rid of sysidcfg all together and answering the prompts instead, but the install still fails in the same way.
Any help will be greatly appreciated.
Thanks,
--Zach
Edited by: ZachAnthony on Oct 9, 2007 2:41 PM
Edited by: ZachAnthony on Oct 9, 2007 2:42 PMI too faced this error and wondered wat 2 do. Its just elementary
Press Stop A combination and come to OK prompt if sparc machine
Remove LAN cable and restart by executing command : boot cdrom
Go for NON NETWORKED option while installation.Later you can setup after installation
If u want u can enable remote services
It will work...no need to do anything with sysidput file
I have advised this option for sparc machines
if any issues reply................. -
Unable to run cmd.exe in hosted web application?
Hi
I have to execute a cmd.exe in web application to merge a file.My code work fine on my dev environment. But on hosting the
application on server unable to run the cmd.exe . Below is the code.
ProcessStartInfo processStartInfo = new ProcessStartInfo("cmd.exe");
processStartInfo.RedirectStandardInput = true;
processStartInfo.RedirectStandardOutput = true;
processStartInfo.UseShellExecute = false;
Process process = Process.Start(processStartInfo);
if (process != null)
process.StandardInput.WriteLine("c:");
process.StandardInput.WriteLine("xcopy " + srcfilename + " " + destfilename + "
/a /m /d /s /e /v");
// process.StandardInput.WriteLine("a");
process.StandardInput.Close(); // line added to stop process from hanging on ReadToEnd()
string outputString = process.StandardOutput.ReadToEnd();
process.Close();
// process.Kill();
PawanWhat is the hosting you are using on azure? Hosted your application as Azure web site or cloud service?
If it is a azure cloud service - you will either need to define the start up tasks to do the same or need to run your azure roles in elevated context.
Read more - https://msdn.microsoft.com/en-us/library/azure/gg456327.aspx
https://msdn.microsoft.com/en-us/library/gg557553.aspx#Runtime
Bhushan | Blog |
LinkedIn | Twitter -
[SOLVED] cronie reports "/usr/sbin/run-cron: No such file or directory
Hi, I just made a fresh install of Arch Linux x86_64 on my PC and I'm having troubles with cronie.
cronie emails say:
/bin/sh: /usr/sbin/run-cron: No such file or directory
In crond.log I have:
Jan 2 22:01:01 localhost /USR/SBIN/CROND[4691]: (root) CMD (run-parts /etc/cron.hourly)
Jan 2 22:47:56 localhost /usr/sbin/crond[5529]: (CRON) STARTUP (1.4.8)
Jan 2 22:47:56 localhost /usr/sbin/crond[5529]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Jan 2 22:47:56 localhost /usr/sbin/crond[5529]: (CRON) INFO (running with inotify support)
Jan 2 22:47:56 localhost /usr/sbin/crond[5529]: (CRON) INFO (@reboot jobs will be run at computer's startup.)
Jan 2 23:00:01 localhost /USR/SBIN/CROND[5733]: (root) CMD (ID=sys-hourly /usr/sbin/run-cron /etc/cron.hourly)
Jan 2 23:00:01 localhost /USR/SBIN/CROND[5732]: (root) CMDOUT (/bin/sh: /usr/sbin/run-cron: No such file or directory)
Jan 2 23:01:01 localhost /USR/SBIN/CROND[5748]: (root) CMD (run-parts /etc/cron.hourly)
I've changed very little of the configuration files provided with the package: root's crontab is completely empty, and cron.hourly only contains the original untouched 0anacron file.
I have the same basic setup on another machine and I don't have such errors.
Any hints?
Thanks
Last edited by Venator85 (2012-01-03 20:26:16)[karol@black ~]$ nosr /usr/sbin/run-cron
extra/dcron
community/fcron
Seems that file is provided by other cron implementations. -
Crond error: unable to exec /usr/sbin/sendmail: cron output for user .
I have cronjobs running as a normal user.
shadyabhi@ArchLinux ~/cronjobs $ crontab -l
#CronJobs located in $HOME/cronjobs/*
0 * * * * /home/shadyabhi/cronjobs/snailmail.sh
* 5 * * * /home/shadyabhi/cronjobs/backup_pkgs.sh
* 5 * * * /home/shadyabhi/cronjobs/backup_songs.sh
shadyabhi@ArchLinux ~/cronjobs $ sudo tail -f -n 10 /var/log/crond.log
Oct 16 09:00:12 ArchLinux crond[13410]: unable to exec /usr/sbin/sendmail: cron output for user shadyabhi /home/shadyabhi/cronjobs/snailmail.sh to /dev/null
Oct 16 09:40:01 ArchLinux crond[1552]: FILE /var/spool/cron/root USER root PID 13622 job sys-hourly
Oct 16 10:00:01 ArchLinux crond[1552]: FILE /var/spool/cron/shadyabhi USER shadyabhi PID 13739 /home/shadyabhi/cronjobs/snailmail.sh
Oct 16 10:00:13 ArchLinux crond[13806]: mailing cron output for user shadyabhi /home/shadyabhi/cronjobs/snailmail.sh
Oct 16 10:00:13 ArchLinux crond[13806]: unable to exec /usr/sbin/sendmail: cron output for user shadyabhi /home/shadyabhi/cronjobs/snailmail.sh to /dev/null
Oct 16 10:40:01 ArchLinux crond[1552]: FILE /var/spool/cron/root USER root PID 14418 job sys-hourly
Oct 16 11:00:01 ArchLinux crond[1552]: FILE /var/spool/cron/shadyabhi USER shadyabhi PID 15527 /home/shadyabhi/cronjobs/snailmail.sh
Oct 16 11:00:13 ArchLinux crond[15593]: mailing cron output for user shadyabhi /home/shadyabhi/cronjobs/snailmail.sh
Oct 16 11:00:13 ArchLinux crond[15593]: unable to exec /usr/sbin/sendmail: cron output for user shadyabhi /home/shadyabhi/cronjobs/snailmail.sh to /dev/null
Oct 16 11:07:01 ArchLinux crond[1552]: reading /var/spool/cron/cron.update
^C
shadyabhi@ArchLinux ~/cronjobs $ pacman -Q | grep sendmail
sendmail 8.14.4-1
shadyabhi@ArchLinux ~/cronjobs $
Why am I getting that error?loafer wrote:The AUR package doesn't install the sendmail binary for some reason. There are quite a few comments about this on the AUR page. I just built it myself. The sendmail binary is there in the src but it doesn't get installed as part of the package. Better ask the maintainer about why this is.
But, I have sendmail binary in /usr/sbin
shadyabhi@ArchLinux ~ $ whereis sendmail
sendmail: /usr/sbin/sendmail /usr/share/man/man1/sendmail.1.gz
shadyabhi@ArchLinux ~ $ -
Please I can not get a .jar file to run on XP SP3 start/run/cmd/
I can not get a .jar file to run on XP SP3 start/run/cmd/
Please help if can figure this out. I'm convinced it is a Windows XP SP3 problem from searching on google and seeing other ppl on XP SP3 with same problem (but no working solution for myself). I'll try to be complete-listing all I've done.
I had installed: Java SE Runtime Environment v6u14 for Windows Multi-language
I had checked here it was working properly: http://www.java.com/en/download/manual.jsp
I'm trying to run this jar file (soht-client-0.6.2.jar):
http://prdownloads.sourceforge.net/telnetoverhttp/soht-java-client-0.6.2.zip?download
http://www.ericdaugherty.com/dev/soht/javaclient.html < this is the information for the program.
(yes the file can be executed and should open the program's window
I wanted to post screenshot of it but friend that it's working for isn't here)
_(Please find log of all cmds I did in this post here: http://pastebin.com/f792983df )_
_I have extracted +'all' the files to: C:\062\+_ (I have tried using other directories, same problem)
++I then start/open/run/cmd+
then I: cd C:\062\+
then I try various commands - all+ of these do absolutely nothing- meaning no errors, no reply, no window opens, nothing except enters that directoy again:
java -jar soht-client-0.6.2.jar
java -jar -client soht-client-0.6.2.jar
java -client -jar soht-client-0.6.2.jar
java -jar soht-client-0.6.2.jar soht.properties
soht-client-0.6.2.jar
So I try this cmd: java soht-client-0.6.2.jar
Reply:
C:\062>java soht-client-0.6.2.jar
Exception in thread "main" java.lang.NoClassDefFoundError: soht-client-0/6/2/jar
Caused by: java.lang.ClassNotFoundException: soht-client-0.6.2.jar
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Could not find the main class: soht-client-0.6.2.jar. Program will exit.
I try this cmd:
java -jar soht-client-0.6.2.jar -client
Reply:
C:\062>java -jar soht-client-0.6.2.jar -client
Unable to load configuration file: -client - java.io.FileNotFoundException: -cli
ent (The system cannot find the file specified)
SOHT Java Client
The SOHT Java Client requires a properties file. Either start
the application in the same directory as the soht.properties
file, or specify the file name on the command line:
java -jar soht-cleint-<version>.jar c:\soht.properties
So then I do these cmds which produce the exact same error/reply just above; Unable to load..:
j_ava -jar soht-client-0.6.2.jar -client soht.properties_
java -jar soht-client-0.6.2.jar -client C:\062\soht.properties
So then I copy soht.properties to C root and do:
java -jar soht-client-0.6.2.jar -client C:\soht.properties <same error as above
Then from other information I have read I right click on the .jar file, select open with Always open with:
_"C:\Program Files\Java\jre6\bin\javaw.exe"_
Try again.. same problem.
Then I do cmd:
_"C:\Program Files\Java\jre6\bin\javaw.exe" -jar "C:\062\soht-client-0.6.2.jar"_
does nothing, retry the other commands same thing (either nothing or those same replies)
Then I read (http://forums.sun.com/thread.jspa?threadID=5384879) someone had the same problem as I and they solved it by uninstalling all Java/reboot/ then install JDK 6 Update 14 with NetBeans 6.5.1 start NetBeans and then it worked for them.
So I unistalled all Java, rebooted and gave the cmd another try (before re-installing), now a new error, of course:
C:\062>java -jar soht-client-0.6.2.jar
'java' is not recognized as an internal or external command, operable program or batch file.
Then I install Java SE and NetBeans Cobundle (JDK 6u14 and NB 6.5.1) Final Release/ reboot/ open Netbeans/
go to test java page; all is good, run cmds again -and still nothing..
C:\062>java -version
java version "1.6.0_14"
Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode, sharing)
I reassociate program with: C:\Program Files\Java\jre1.6.007\bin\javaw.exe_
same thing.. nothing
Thank you very much for your time :D_
PS. My computer has been newly reformatted so needing another reformat I'm sure is not the solution.Thank you very much for your replies Taggert_77 & swmtgoet_x :D
Taggert77_: I have never used NetBeans. I only installed it in the bundle as I had read on another post that somehow installing the bundle magically helped another user with the same problem (he didn't know why it worked after that either).
Before XP SP3 I was able to execute .jar file through cmd prompt. Now I am not.
This file is executable, grab it and you will see. Here is a screen shot (program in front is FlashFXP, behind is the cmd prompt and what should happen):http://www.freeimagehosting.net/uploads/53273b4ddf.jpg
swmtgoetx_: I only did the other cmd's to try to make it spit out something, anything lol :D
The proper cmd is simply: java -jar soht-client-0.6.2.jar
I did give your cmd a try, and it produced nothing :( (just like the other correct cmds)
java -client -jar soht-client-0.6.2.jar soht.properties
Thank you again...the mystery remains
PS. If you do a search for this you'll find an amazing amount of XP SP3 users with the same problem and no solution posted that I could find except one chap that did the unistall install order that I did above). -
Unable to run ALBPM Ant tasks on Linux
Hi,
I am trying to execute a simple build script that creates a session with given directory details and deploys/publishes a project on to the Enterprise Server. With usual modifications, this scripts works fine on Windows, but on Linux it keeps on giving an error that makes no sense. I am copying my build file as well as error stack trace below. Please help me on urgent basis.
OS: Linux 64 bit
Oracle Enterprise Server: 10.3.1.0.0
JAVA_HOME=/usr/java/jdk1.6.0_16
ANT_HOME=/usr/ant/apache-ant-1.8.1
build.xml
<!-- This script publishes and deploys a BPM Project, undeploys and unpublishes a BPM Project, Export Organisation.xml -->
<project name="sampleproj"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee">
<!-- Include properties -->
<property file="build.properties"/>
<echo message="Enterprise Home Directory:: ${fuego.basedir}" />
<echo message="Ant Version:: ${ant.version}" />
<echo message="Connecting to directory:: ${fuego.directoryid}" />
<fuego:passport id="passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish-on-linux" description="Publish and deploy processes">
<echo message="Creating session..."/>
<!-- Open a session to the ALBPM directory -->
<fuego:session passportref="passport"
verbose="true"
haltonerror="true">
<!-- Publish processes -->
<fuego:publish fpr="${bpm.project.path}"
deploy="true"
engine="${fuego.engine}"
haltonerror="true"
importdata="true"
automapconfigs="true"
automapvars="true"
automaproles="true"
automapbuspars="true"
importcustomviews="true">
</fuego:publish>
</fuego:session>
</target>
</project>
build.properties
# Enterprise installation directory
fuego.basedir=/opt/OraBPMwlHome
# Name of ALBPM Engine to deploy to
fuego.engine=bpmengine
# Project to deploy
bpm.project.path=/usr/test_ant/sampleproj
# Directory details
fuego.directoryid=default
Error on running the target publish-on-linux
[echo] Enterprise Home Directory:: /opt/OraBPMwlHome
[echo] Ant Version:: Apache Ant version 1.8.1 compiled on April 30 2010
[echo] Connecting to directory:: default
publish-on-linux:
[echo] Creating session...
[fuego:session] fuego base dir [opt/OraBPMwlHome]
BUILD FAILED
/usr/test_ant/build1.xml:25: java.lang.NullPointerException
at fuego.tools.ant.BaseFuegoTask.getClassLoader(Unknown Source)
at fuego.tools.ant.BaseFuegoTask.executeTask(Unknown Source)
at fuego.tools.ant.enterprise.taskdefs.DirectorySessionTask.executeImpl(Unknown Source)
at fuego.tools.ant.BaseFuegoTask.execute(Unknown Source)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:390)
at org.apache.tools.ant.Target.performTasks(Target.java:411)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1397)
at org.apache.tools.ant.Project.executeTarget(Project.java:1366)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1249)
at org.apache.tools.ant.Main.runBuild(Main.java:801)
at org.apache.tools.ant.Main.startAnt(Main.java:218)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Total time: 0 secondsAmit Zini wrote:
Dear All,
I am unable to run my oracle 10g forms application on Linux machine which is runing Fedora 16.
i have tried to install jre 6 but mozilla firefox 10 is not loading my oracle 10 forms application, it says plugin missing.
Kindly help me to short out the problem.
java version "1.6.0_24"
OpenJDK Runtime Environment (IcedTea6 1.11.1) (fedora-65.1.11.1.fc16-i386)
OpenJDK Server VM (build 20.0-b12, mixed mode)
Regards.
Amit.Try with down grade of Mozilla firefox. may be version 6 to 8. not 9/10.
Firefox with 9 and higher doesn't support JRE version 1.6.XX.
Hopes this helps -
Unable to Run/Deploy the Application
JDev 11.1.2.1.0 ADF BC
I am unable to run my application and it gives the below log:
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1112\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Sahar Hassan\sqljdbc4.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1112\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;D:\oracle\product\10.2.0\db_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Users\ADMINI~1\AppData\Local\Temp\trustStore4013408576188156013.jks -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1112\profiles\default\sysext_manifest_classpath weblogic.Server
<Jun 19, 2012 4:43:24 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jun 19, 2012 4:43:24 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jun 19, 2012 4:43:24 PM IST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\lib\sqljdbc4.jar>
<Jun 19, 2012 4:43:25 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
<Jun 19, 2012 4:43:27 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Jun 19, 2012 4:43:27 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jun 19, 2012 4:43:27 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jun 19, 2012 4:43:27 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jun 19, 2012 4:43:27 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00019. Log messages will continue to be logged in C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Jun 19, 2012 4:43:27 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Jun 19, 2012 4:43:31 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
<Jun 19, 2012 4:43:36 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jun 19, 2012 4:43:36 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<CodebasePolicyHandler> <migrateDeploymentPolicies> Migration of codebase policy failed. Reason: oracle.security.jps.JpsException: java.lang.reflect.InvocationTargetException.
<AppPolicyHandler> <migrateAppPolicies> Migration of application policy failed. Reason: oracle.security.jps.JpsException: java.lang.reflect.InvocationTargetException.
<CodebasePolicyHandler> <migrateDeploymentPolicies> Migration of codebase policy failed. Reason: oracle.security.jps.JpsException: java.lang.reflect.InvocationTargetException.
<AppPolicyHandler> <migrateAppPolicies> Migration of application policy failed. Reason: oracle.security.jps.JpsException: java.lang.reflect.InvocationTargetException.
<WSEE:12>com.bea.core.repackaged.springframework.beans.factory.BeanCreationException: Error creating bean with name 'weblogic.wsee.jaxws.client.async.AsyncTransportProvider': Instantiation of bean failed; nested exception is com.bea.core.repackaged.springframework.beans.BeanInstantiationException: Could not instantiate bean class [weblogic.wsee.jaxws.client.async.AsyncTransportProvider]: No default constructor found; nested exception is java.lang.NoSuchMethodException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider.<init>()<WSEEComponentContributor.loadUsingSpring:83>
<Jun 19, 2012 4:44:26 PM IST> <Error> <HTTP> <BEA-101216> <Servlet: "weblogic.wsee.jaxws.client.async.AsyncTransportProvider" failed to preload on startup in Web application: "SugarCRM-ViewController-context-root".
javax.xml.ws.WebServiceException: javax.xml.ws.WebServiceException: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
at weblogic.wsee.jaxws.WLSInstanceResolver.getSingleton(WLSInstanceResolver.java:36)
at weblogic.wsee.jaxws.WLSInstanceResolver.start(WLSInstanceResolver.java:55)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.start(WLSInstanceResolver.java:82)
at com.sun.xml.ws.server.InvokerTube.setEndpoint(InvokerTube.java:85)
at weblogic.wsee.jaxws.EndpointAwareLateInitTube.postCreateEndpoint(EndpointAwareLateInitTube.java:48)
Truncated. see log file for complete stacktrace
Caused By: javax.xml.ws.WebServiceException: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
at weblogic.wsee.jaxws.WLSServletInstanceResolver.create(WLSServletInstanceResolver.java:37)
at weblogic.wsee.jaxws.WLSInstanceResolver.getSingleton(WLSInstanceResolver.java:34)
at weblogic.wsee.jaxws.WLSInstanceResolver.start(WLSInstanceResolver.java:55)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.start(WLSInstanceResolver.java:82)
at com.sun.xml.ws.server.InvokerTube.setEndpoint(InvokerTube.java:85)
Truncated. see log file for complete stacktrace
Caused By: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
at java.lang.Class.newInstance0(Class.java:340)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.wsee.jaxws.injection.WSEEComponentContributor.newInstance(WSEEComponentContributor.java:54)
at weblogic.wsee.jaxws.injection.WSEEComponentContributor.newInstance(WSEEComponentContributor.java:42)
at weblogic.wsee.jaxws.WLSServletInstanceResolver.create(WLSServletInstanceResolver.java:35)
Truncated. see log file for complete stacktrace
>
<Jun 19, 2012 4:44:26 PM IST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'SugarCRM'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "weblogic.wsee.jaxws.client.async.AsyncTransportProvider" failed to preload on startup in Web application: "SugarCRM-ViewController-context-root".
javax.xml.ws.WebServiceException: javax.xml.ws.WebServiceException: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
at weblogic.wsee.jaxws.WLSInstanceResolver.getSingleton(WLSInstanceResolver.java:36)
at weblogic.wsee.jaxws.WLSInstanceResolver.start(WLSInstanceResolver.java:55)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.start(WLSInstanceResolver.java:82)
at com.sun.xml.ws.server.InvokerTube.setEndpoint(InvokerTube.java:85)
at weblogic.wsee.jaxws.EndpointAwareLateInitTube.postCreateEndpoint(EndpointAwareLateInitTube.java:48)
at weblogic.wsee.jaxws.JAXWSServlet.registerEndpoint(JAXWSServlet.java:150)
at weblogic.wsee.jaxws.JAXWSServlet.init(JAXWSServlet.java:64)
at weblogic.wsee.jaxws.JAXWSDeployedServlet.init(JAXWSDeployedServlet.java:54)
at javax.servlet.GenericServlet.init(GenericServlet.java:241)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: javax.xml.ws.WebServiceException: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
at weblogic.wsee.jaxws.WLSServletInstanceResolver.create(WLSServletInstanceResolver.java:37)
at weblogic.wsee.jaxws.WLSInstanceResolver.getSingleton(WLSInstanceResolver.java:34)
... 49 more
Caused by: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
at java.lang.Class.newInstance0(Class.java:340)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.wsee.jaxws.injection.WSEEComponentContributor.newInstance(WSEEComponentContributor.java:54)
at weblogic.wsee.jaxws.injection.WSEEComponentContributor.newInstance(WSEEComponentContributor.java:42)
at weblogic.wsee.jaxws.WLSServletInstanceResolver.create(WLSServletInstanceResolver.java:35)
... 50 more
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
at java.lang.Class.newInstance0(Class.java:340)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.wsee.jaxws.injection.WSEEComponentContributor.newInstance(WSEEComponentContributor.java:54)
at weblogic.wsee.jaxws.injection.WSEEComponentContributor.newInstance(WSEEComponentContributor.java:42)
at weblogic.wsee.jaxws.WLSServletInstanceResolver.create(WLSServletInstanceResolver.java:35)
Truncated. see log file for complete stacktrace
>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00019. Log messages will continue to be logged in C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\JDK160~1\jre\lib\security\cacerts.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on 127.0.0.1:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 0:0:0:0:0:0:0:1:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Warning> <Server> <BEA-002611> <Hostname "path-mumbai7", maps to multiple IP addresses: 192.168.1.20, fe80:0:0:0:8ceb:756:d0e1:6176%11, fe80:0:0:0:3401:2477:3f57:feeb%13, 2001:0:5ef5:79fb:3401:2477:3f57:feeb>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:3401:2477:3f57:feeb:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 192.168.1.20:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:114:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:3401:2477:3f57:feeb:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.1.20:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:8ceb:756:d0e1:6176:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:8ceb:756:d0e1:6176:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 2001:0:5ef5:79fb:3401:2477:3f57:feeb:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 2001:0:5ef5:79fb:3401:2477:3f57:feeb:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:114:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Jun 19, 2012 4:44:34 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jun 19, 2012 4:44:34 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 98161 ms.
IntegratedWebLogicServer started.
[Running application SugarCRM on Server Instance IntegratedWebLogicServer...]
[04:44:34 PM] **** Warning: Application SugarCRM may have been left deployed on the server. Undeploy it from the admin console.
[04:44:34 PM] Web Module ViewControllerWebApp.war recognized in project ViewController.jpr
[04:44:34 PM] ---- Deployment started. ----
[04:44:34 PM] Target platform is (Weblogic 10.3).
[04:44:35 PM] Retrieving existing application information
[04:44:35 PM] Running dependency analysis...
[04:44:35 PM] Deploying 2 profiles...
[04:44:35 PM] Wrote Web Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\SugarCRM\ViewControllerWebApp.war
[04:44:36 PM] Wrote Enterprise Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\SugarCRM
[04:44:36 PM] Redeploying Application...
<CodebasePolicyHandler> <migrateDeploymentPolicies> Migration of codebase policy failed. Reason: oracle.security.jps.JpsException: java.lang.reflect.InvocationTargetException.
<AppPolicyHandler> <migrateAppPolicies> Migration of application policy failed. Reason: oracle.security.jps.JpsException: java.lang.reflect.InvocationTargetException.
<Jun 19, 2012 4:44:37 PM IST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1340104476670' for task '0'. Error is: 'weblogic.application.ModuleException: Context path '/SugarCRM-ViewController-context-root' is already in use by the module: SugarCRM-ViewController-context-root application: SugarCRM_Project1_SugarCRM'
weblogic.application.ModuleException: Context path '/SugarCRM-ViewController-context-root' is already in use by the module: SugarCRM-ViewController-context-root application: SugarCRM_Project1_SugarCRM
at weblogic.servlet.internal.WebAppModule.initAndValidateContextPath(WebAppModule.java:1210)
at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:970)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:382)
at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:433)
at weblogic.application.internal.flow.ModuleStateDriver$2.next(ModuleStateDriver.java:375)
Truncated. see log file for complete stacktrace
>
<Jun 19, 2012 4:44:37 PM IST> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'SugarCRM'.>
<Jun 19, 2012 4:44:37 PM IST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'SugarCRM'.>
<Jun 19, 2012 4:44:37 PM IST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Context path '/SugarCRM-ViewController-context-root' is already in use by the module: SugarCRM-ViewController-context-root application: SugarCRM_Project1_SugarCRM
at weblogic.servlet.internal.WebAppModule.initAndValidateContextPath(WebAppModule.java:1210)
at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:970)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:382)
at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:433)
at weblogic.application.internal.flow.ModuleStateDriver$2.next(ModuleStateDriver.java:375)
Truncated. see log file for complete stacktrace
>
[04:44:37 PM] Deployment cancelled.
[04:44:37 PM] ---- Deployment incomplete ----.
[04:44:37 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
#### Cannot run application SugarCRM due to error deploying to IntegratedWebLogicServer.
[Application SugarCRM stopped and undeployed from Server Instance IntegratedWebLogicServer]Context path '/SugarCRM-ViewController-context-root' is already in use by the module: SugarCRM-ViewController-context-root application: SugarCRM_Project1_SugarCRMLooks like the application (or another application which uses same context root) is already deployed to the server and could not be undeployed.
Can you invoke the WLS console, navigate the deployment and undeploy it, then try deploying from JDev and see if it works fine?
-Arun -
Unable to run a Batch File Operating System Command
Using XI 3.0, I am unable to run a Batch File Operating System Command After Message Processing.
My Batch file:
gpg -se -r BOA3RSKY --armor --passphrase-fd 0 %1 < C:\Progra~1\GNU\GnuPG\gpgin
My Command Line (ID scenario)
exec "cmd.exe /c C:\Progra~1\GNU\GnuPG\boagpg.bat %F"
If I execute
exec "cmd.exe /c type C:\Progra~1\GNU\GnuPG\boagpg.bat >xis.txt"
It displays the contents of boagpg.bat file in xis.txt.
I just don't understand why when I run the batch file, I would expect an %F.asc encrypted file in the same directory as the %F unencrypted file.
Any ideas?
or will I need Basis to create commands that will allow me to run GPG from XI Command Line?Check this links if its helpful
http://help.sap.com/saphelp_nw04/helpdata/en/bb/c7423347dc488097ab705f7185c88f/frameset.htm
/people/sap.user72/blog/2004/01/30/command-line-help-utility
Check this thread a similar problem
Process Integration (PI) & SOA Middleware
Note 841704 - XI File & JDBC Adapter: Operating system command
http://service.sap.com/sap/support/notes/841704
Try to see the below links
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
OS Command on FTP
OS command line script - Need help
FTP - Run OS Command before file processing
Note: reward points if solution found helpfull
Regards
Chandrakanth.k -
Autofsd: /usr/sbin/automount terminated with signal Abort trap: 6
This is 100% recreatable. All I have to do is type:
sudo automount -vc
or plug in a USB drive.
4/11/12 8:09:32.959 AM com.apple.autofsd: Assertion failed: (strlcat((mntops_out), (","), (optlen)) < (optlen)), function process_fstab_mntopts, file /SourceCache/autofs/autofs-207.1/automountlib/ns_fstab.c, line 171.
4/11/12 8:09:33.016 AM ReportCrash: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
4/11/12 8:09:33.288 AM autofsd: /usr/sbin/automount terminated with signal Abort trap: 6
4/11/12 8:09:33.345 AM ReportCrash: Saved crash report for automount[65895] version ??? (???) to /Library/Logs/DiagnosticReports/automount_2012-04-11-080933_localhost.crash
I have a bunch of NFS mounts defined in disk_util as well. Not that that should cause it. All mounts "verify" OK.Process:
automount [65895]
Path:
/usr/sbin/automount
Identifier:
automount
Version:
Code Type:
X86-64 (Native)
Parent Process: autofsd [87]
Date/Time:
2012-04-11 08:09:32.965 -0700
OS Version:
Mac OS X 10.7.3 (11D50)
Report Version: 9
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
Assertion failed: (strlcat((mntops_out), (","), (optlen)) < (optlen)), function process_fstab_mntopts, file /SourceCache/autofs/autofs-207.1/automountlib/ns_fstab.c, line 171.
objc[65895]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib
0x00007fff8fed7ce2 __pthread_kill + 10
1 libsystem_c.dylib
0x00007fff8a48c7d2 pthread_kill + 95
2 libsystem_c.dylib
0x00007fff8a47da7a abort + 143
3 libsystem_c.dylib
0x00007fff8a4b05de __assert_rtn + 146
4 automount
0x0000000103db2e21 0x103dac000 + 28193
5 automount
0x0000000103db2f22 0x103dac000 + 28450
6 automount
0x0000000103db153a 0x103dac000 + 21818
7 automount
0x0000000103db3468 0x103dac000 + 29800
8 automount
0x0000000103dadd1f 0x103dac000 + 7455
9 automount
0x0000000103dad5d0 0x103dac000 + 5584
Thread 1:
0 libsystem_kernel.dylib
0x00007fff8fed8192 __workq_kernreturn + 10
1 libsystem_c.dylib
0x00007fff8a48c594 _pthread_wqthread + 758
2 libsystem_c.dylib
0x00007fff8a48db85 start_wqthread + 13
Thread 2:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib
0x00007fff8fed87e6 kevent + 10
1 libdispatch.dylib
0x00007fff90a795be _dispatch_mgr_invoke + 923
2 libdispatch.dylib
0x00007fff90a7814e _dispatch_mgr_thread + 54
Thread 3:
0 libsystem_kernel.dylib
0x00007fff8fed8192 __workq_kernreturn + 10
1 libsystem_c.dylib
0x00007fff8a48c594 _pthread_wqthread + 758
2 libsystem_c.dylib
0x00007fff8a48db85 start_wqthread + 13
Thread 4:
0 libsystem_kernel.dylib
0x00007fff8fed8192 __workq_kernreturn + 10
1 libsystem_c.dylib
0x00007fff8a48c594 _pthread_wqthread + 758
2 libsystem_c.dylib
0x00007fff8a48db85 start_wqthread + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x0000000000000006 rcx: 0x00007fff639a8dc8 rdx: 0x0000000000000000
rdi: 0x0000000000000303 rsi: 0x0000000000000006 rbp: 0x00007fff639a8df0 rsp: 0x00007fff639a8dc8
r8: 0x00007fff75bc9fb8 r9: 0x00000000000000ab r10: 0x00007fff8fed7d0a r11: 0xffffff80002d8220
r12: 0x0000000103db59b8 r13: 0x0000000103df9000 r14: 0x00007fff75bcc960 r15: 0x0000000103db59ce
rip: 0x00007fff8fed7ce2 rfl: 0x0000000000000246 cr2: 0x0000000103df9000
Logical CPU: 0
Binary Images:
0x103dac000 -
0x103db6fff automount (??? - ???) <E1A801C7-AA80-30A4-A164-E86E07CF94E8> /usr/sbin/automount
0x7fff639ac000 -
0x7fff639e0baf dyld (195.6 - ???) <0CD1B35B-A28F-32DA-B72E-452EAD609613> /usr/lib/dyld
0x7fff84dc6000 -
0x7fff84df6ff7 com.apple.DictionaryServices (1.2.1 - 158.2) <3FC86118-7553-38F7-8916-B329D2E94476> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x7fff85274000 -
0x7fff85275ff7 libsystem_blocks.dylib (53.0.0 - compatibility 1.0.0) <8BCA214A-8992-34B2-A8B9-B74DEACA1869> /usr/lib/system/libsystem_blocks.dylib
0x7fff85276000 -
0x7fff8527cfff com.apple.DiskArbitration (2.4.1 - 2.4.1) <CEA34337-63DE-302E-81AA-10D717E1F699> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff855e4000 -
0x7fff855e9fff libcompiler_rt.dylib (6.0.0 - compatibility 1.0.0) <98ECD5F6-E85C-32A5-98CD-8911230CB66A> /usr/lib/system/libcompiler_rt.dylib
0x7fff85ac7000 -
0x7fff85b37fff com.apple.datadetectorscore (3.0 - 179.4) <B4C6417F-296C-31C1-BB94-980BFCDC9175> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x7fff85dad000 -
0x7fff85daeff7 libsystem_sandbox.dylib (??? - ???) <5087ADAD-D34D-3844-9D04-AFF93CED3D92> /usr/lib/system/libsystem_sandbox.dylib
0x7fff85e19000 -
0x7fff85e65ff7 com.apple.SystemConfiguration (1.11.2 - 1.11) <A14F3583-9CC0-397D-A50E-17217075953F> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff87081000 -
0x7fff87183ff7 libxml2.2.dylib (10.3.0 - compatibility 10.0.0) <D46F371D-6422-31B7-BCE0-D80713069E0E> /usr/lib/libxml2.2.dylib
0x7fff87184000 -
0x7fff871c3fff com.apple.AE (527.7 - 527.7) <B82F7ABC-AC8B-3507-B029-969DD5CA813D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x7fff871c4000 -
0x7fff873c6fff libicucore.A.dylib (46.1.0 - compatibility 1.0.0) <38CD6ED3-C8E4-3CCD-89AC-9C3198803101> /usr/lib/libicucore.A.dylib
0x7fff873e3000 -
0x7fff873e7fff libutil.dylib (??? - ???) <28672328-B738-38CE-B231-8A93CA6E6EA4> /usr/lib/libutil.dylib
0x7fff873e8000 -
0x7fff873eafff com.apple.TrustEvaluationAgent (2.0 - 1) <1F31CAFF-C1C6-33D3-94E9-11B721761DDF> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
0x7fff876bd000 -
0x7fff876f8fff libsystem_info.dylib (??? - ???) <35F90252-2AE1-32C5-8D34-782C614D9639> /usr/lib/system/libsystem_info.dylib
0x7fff87764000 -
0x7fff8778fff7 libxslt.1.dylib (3.24.0 - compatibility 3.0.0) <8051A3FC-7385-3EA9-9634-78FC616C3E94> /usr/lib/libxslt.1.dylib
0x7fff87811000 -
0x7fff8781ffff com.apple.NetAuth (1.0 - 3.0) <F384FFFD-70F6-3B1C-A886-F5B446E456E7> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
0x7fff87881000 -
0x7fff878f6ff7 libc++.1.dylib (19.0.0 - compatibility 1.0.0) <C0EFFF1B-0FEB-3F99-BE54-506B35B555A9> /usr/lib/libc++.1.dylib
0x7fff87ba5000 -
0x7fff87bb7ff7 libz.1.dylib (1.2.5 - compatibility 1.0.0) <30CBEF15-4978-3DED-8629-7109880A19D4> /usr/lib/libz.1.dylib
0x7fff87f7e000 -
0x7fff87f7ffff libunc.dylib (24.0.0 - compatibility 1.0.0) <C67B3B14-866C-314F-87FF-8025BEC2CAAC> /usr/lib/system/libunc.dylib
0x7fff88122000 -
0x7fff88127fff libcache.dylib (47.0.0 - compatibility 1.0.0) <B7757E2E-5A7D-362E-AB71-785FE79E1527> /usr/lib/system/libcache.dylib
0x7fff88128000 -
0x7fff8812eff7 libunwind.dylib (30.0.0 - compatibility 1.0.0) <1E9C6C8C-CBE8-3F4B-A5B5-E03E3AB53231> /usr/lib/system/libunwind.dylib
0x7fff8816e000 -
0x7fff88176fff libsystem_dnssd.dylib (??? - ???) <7749128E-D0C5-3832-861C-BC9913F774FA> /usr/lib/system/libsystem_dnssd.dylib
0x7fff88303000 -
0x7fff8830dff7 liblaunch.dylib (392.18.0 - compatibility 1.0.0) <39EF04F2-7F0C-3435-B785-BF283727FFBD> /usr/lib/system/liblaunch.dylib
0x7fff8830e000 -
0x7fff88313fff com.apple.OpenDirectory (10.7 - 146) <91A87249-6A2F-3F89-A8DE-0E95C0B54A3A> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
0x7fff8848a000 -
0x7fff88493ff7 libsystem_notify.dylib (80.1.0 - compatibility 1.0.0) <A4D651E3-D1C6-3934-AD49-7A104FD14596> /usr/lib/system/libsystem_notify.dylib
0x7fff8851a000 -
0x7fff88521fff libcopyfile.dylib (85.1.0 - compatibility 1.0.0) <172B1985-F24A-34E9-8D8B-A2403C9A0399> /usr/lib/system/libcopyfile.dylib
0x7fff88685000 -
0x7fff887ecff7 com.apple.CFNetwork (520.3.2 - 520.3.2) <516B611D-E53E-3467-9211-3C5B86ABA865> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x7fff88f68000 -
0x7fff88f73ff7 libc++abi.dylib (14.0.0 - compatibility 1.0.0) <8FF3D766-D678-36F6-84AC-423C878E6D14> /usr/lib/libc++abi.dylib
0x7fff8932f000 -
0x7fff8964bff7 com.apple.CoreServices.CarbonCore (960.20 - 960.20) <C45CA09E-8867-3D67-BB2E-48D2E6B0D78C> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x7fff898e0000 -
0x7fff89ab4fff com.apple.CoreFoundation (6.7.1 - 635.19) <57B77925-9065-38C9-A05B-02F4F9ED007C> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff89ab5000 -
0x7fff89accfff com.apple.CFOpenDirectory (10.7 - 144) <9709423E-8484-3B26-AAE8-EF58D1B8FB3F> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
0x7fff89ad1000 -
0x7fff89ad2fff libDiagnosticMessagesClient.dylib (??? - ???) <3DCF577B-F126-302B-BCE2-4DB9A95B8598> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff89ad3000 -
0x7fff89ad8ff7 libsystem_network.dylib (??? - ???) <5DE7024E-1D2D-34A2-80F4-08326331A75B> /usr/lib/system/libsystem_network.dylib
0x7fff8a26e000 -
0x7fff8a2d8ff7 com.apple.framework.IOKit (2.0 - ???) <EEEB42FD-E3E1-3A94-A771-B1993B694F17> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff8a3a3000 -
0x7fff8a3bfff7 com.apple.GenerationalStorage (1.0 - 126.1) <509F52ED-E54B-3FEF-B3C2-759387B826E6> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
0x7fff8a43c000 -
0x7fff8a519fef libsystem_c.dylib (763.12.0 - compatibility 1.0.0) <FF69F06E-0904-3C08-A5EF-536FAFFFDC22> /usr/lib/system/libsystem_c.dylib
0x7fff8a56f000 -
0x7fff8a573fff libmathCommon.A.dylib (2026.0.0 - compatibility 1.0.0) <FF83AFF7-42B2-306E-90AF-D539C51A4542> /usr/lib/system/libmathCommon.A.dylib
0x7fff8a96c000 -
0x7fff8a972fff libmacho.dylib (800.0.0 - compatibility 1.0.0) <D86F63EC-D2BD-32E0-8955-08B5EAFAD2CC> /usr/lib/system/libmacho.dylib
0x7fff8a9b6000 -
0x7fff8accfff7 com.apple.Foundation (6.7.1 - 833.24) <6D4E6F93-64EF-3D41-AE80-2BB10E2E6323> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff8afb7000 -
0x7fff8afc4ff7 libbz2.1.0.dylib (1.0.5 - compatibility 1.0.0) <8EDE3492-D916-37B2-A066-3E0F054411FD> /usr/lib/libbz2.1.0.dylib
0x7fff8b08c000 -
0x7fff8b0b9fe7 libSystem.B.dylib (159.1.0 - compatibility 1.0.0) <095FDD3C-3961-3865-A59B-A5B0A4B8B923> /usr/lib/libSystem.B.dylib
0x7fff8b0ba000 -
0x7fff8b19cfff com.apple.CoreServices.OSServices (478.37 - 478.37) <1DAC695E-0D0F-3AE2-974F-A173E69E67CC> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x7fff8b2f7000 -
0x7fff8b2f9fff libquarantine.dylib (36.2.0 - compatibility 1.0.0) <48656562-FF20-3B55-9F93-407ACA7341C0> /usr/lib/system/libquarantine.dylib
0x7fff8bf17000 -
0x7fff8c023fff libcrypto.0.9.8.dylib (44.0.0 - compatibility 0.9.8) <3A8E1F89-5E26-3C8B-B538-81F5D61DBF8A> /usr/lib/libcrypto.0.9.8.dylib
0x7fff8c572000 -
0x7fff8c572fff libkeymgr.dylib (23.0.0 - compatibility 1.0.0) <61EFED6A-A407-301E-B454-CD18314F0075> /usr/lib/system/libkeymgr.dylib
0x7fff8c7b8000 -
0x7fff8ca9afff com.apple.security (7.0 - 55110) <252F9E04-FF8A-3EA7-A38E-51DD0653663C> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff8d102000 -
0x7fff8d107fff libpam.2.dylib (3.0.0 - compatibility 3.0.0) <D952F17B-200A-3A23-B9B2-7C1F7AC19189> /usr/lib/libpam.2.dylib
0x7fff8d296000 -
0x7fff8d39dfe7 libsqlite3.dylib (9.6.0 - compatibility 9.0.0) <EE02BB01-64C9-304D-9719-A35F5CD6D04C> /usr/lib/libsqlite3.dylib
0x7fff8d39e000 -
0x7fff8d39ffff libdnsinfo.dylib (395.6.0 - compatibility 1.0.0) <718A135F-6349-354A-85D5-430B128EFD57> /usr/lib/system/libdnsinfo.dylib
0x7fff8f019000 -
0x7fff8f0b9fff com.apple.LaunchServices (480.27.1 - 480.27.1) <4DC96C1E-6FDE-305E-9718-E4C5C1341F56> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x7fff8f36a000 -
0x7fff8f371fff com.apple.NetFS (4.0 - 4.0) <B9F41443-679A-31AD-B0EB-36557DAF782B> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
0x7fff8f3e5000 -
0x7fff8f427ff7 libcommonCrypto.dylib (55010.0.0 - compatibility 1.0.0) <A5B9778E-11C3-3F61-B740-1F2114E967FB> /usr/lib/system/libcommonCrypto.dylib
0x7fff8febf000 -
0x7fff8fec0ff7 libremovefile.dylib (21.1.0 - compatibility 1.0.0) <739E6C83-AA52-3C6C-A680-B37FE2888A04> /usr/lib/system/libremovefile.dylib
0x7fff8fec1000 -
0x7fff8fee1fff libsystem_kernel.dylib (1699.22.73 - compatibility 1.0.0) <69F2F501-72D8-3B3B-8357-F4418B3E1348> /usr/lib/system/libsystem_kernel.dylib
0x7fff8fee2000 -
0x7fff8fefffff libxpc.dylib (77.18.0 - compatibility 1.0.0) <26C05F31-E809-3B47-AF42-1460971E3AC3> /usr/lib/system/libxpc.dylib
0x7fff8ff6e000 -
0x7fff8ffbcfff libauto.dylib (??? - ???) <D8AC8458-DDD0-3939-8B96-B6CED81613EF> /usr/lib/libauto.dylib
0x7fff8ffbe000 -
0x7fff8ffcdff7 libxar-nossl.dylib (??? - ???) <A6ABBFB9-E4ED-38AD-BBBB-F9958B9CEFB5> /usr/lib/libxar-nossl.dylib
0x7fff90321000 -
0x7fff903a4fef com.apple.Metadata (10.7.0 - 627.28) <1C14033A-69C9-3757-B24D-5583AEAC2CBA> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x7fff9046a000 -
0x7fff9047cff7 libbsm.0.dylib (??? - ???) <349BB16F-75FA-363F-8D98-7A9C3FA90A0D> /usr/lib/libbsm.0.dylib
0x7fff904ea000 -
0x7fff904fdff7 libCRFSuite.dylib (??? - ???) <034D4DAA-63F0-35E4-BCEF-338DD7A453DD> /usr/lib/libCRFSuite.dylib
0x7fff904fe000 -
0x7fff90502fff libdyld.dylib (195.5.0 - compatibility 1.0.0) <F1903B7A-D3FF-3390-909A-B24E09BAD1A5> /usr/lib/system/libdyld.dylib
0x7fff90503000 -
0x7fff9059dff7 com.apple.SearchKit (1.4.0 - 1.4.0) <4E70C394-773E-3A4B-A93C-59A88ABA9509> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x7fff90a76000 -
0x7fff90a84fff libdispatch.dylib (187.7.0 - compatibility 1.0.0) <712AAEAC-AD90-37F7-B71F-293FF8AE8723> /usr/lib/system/libdispatch.dylib
0x7fff90c54000 -
0x7fff90cc7fff libstdc++.6.dylib (52.0.0 - compatibility 7.0.0) <6BDD43E4-A4B1-379E-9ED5-8C713653DFF2> /usr/lib/libstdc++.6.dylib
0x7fff90dbc000 -
0x7fff90dbcfff com.apple.CoreServices (53 - 53) <043C8026-8EDD-3241-B090-F589E24062EF> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x7fff90df9000 -
0x7fff90e07ff7 libkxld.dylib (??? - ???) <65BE345D-6618-3D1A-9E2B-255E629646AA> /usr/lib/system/libkxld.dylib
0x7fff91731000 -
0x7fff91732fff liblangid.dylib (??? - ???) <CACBE3C3-2F7B-3EED-B50E-EDB73F473B77> /usr/lib/liblangid.dylib
0x7fff91807000 -
0x7fff918ebe5f libobjc.A.dylib (228.0.0 - compatibility 1.0.0) <871E688B-CF57-3BC7-80D6-F6476DFF109B> /usr/lib/libobjc.A.dylib
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 10774
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=74.9M resident=45.1M(60%) swapped_out_or_unallocated=29.9M(40%)
Writable regions: Total=69.6M written=500K(1%) resident=812K(1%) swapped_out=0K(0%) unallocated=68.9M(99%)
REGION TYPE
VIRTUAL
===========
=======
MALLOC
59.3M
MALLOC guard page
32K
STACK GUARD
56.0M
Stack
10.0M
VM_ALLOCATE
40K
__DATA
2964K
__LINKEDIT
47.6M
__TEXT
27.3M
__UNICODE
544K
shared memory
12K
===========
=======
TOTAL
203.9M -
OWB - Workflow- Cannot run program "/usr/bin/perl": CreateProcess error=2,
Hi All,
I am using OWB 11gR2 and I am getting "perl" location error after start workflow for any dimension or fact.
*Cannot run program "/usr/bin/perl": CreateProcess error=2, The system cannot find the file specified
The log is below. I am using Windows 2008 R2 OS and 11gR2 DB. The perl path is set in the environment variables and I can run the perl.exe from command line.
Why OWB is looking for the Unix base path "/usr/bin/perl": is a question for me.
If anybody knows the issue please guide me.
Thanks
OUBIWF_D_DEVICE_ACTIVITY_TYPE 2012-07-04 16:57:37.0 4
Parameters
OUBIWF_D_DEVICE_ACTIVITY_TYPE:FILEMGR_PRE 1 2012-07-04 16:57:38.0 2
Parameters
RPE-02229: The following debug information was collected:
RPE-02230: Debug Information: os.name = Windows Server 2008 R2
RPE-02230: Debug Information: os.version = 6.1
RPE-02230: Debug Information: os.arch = amd64
RPE-02230: Debug Information: user.name = INT-A-MDM-01$
RPE-02230: Debug Information: user.dir = C:\product\11.2.0\dbhome_3\owb\bin\win32
RPE-02230: Debug Information: argv.arg0 = /usr/bin/perl
RPE-02230: Debug Information: argv.arg1 = /spl/intbase/DB/tools/filemgr/splfilemgr.plx
RPE-02230: Debug Information: argv.arg2 = -l
RPE-02230: Debug Information: argv.arg3 = /spl/BIDevelopment/bi2400db
RPE-02230: Debug Information: argv.arg4 = -n
RPE-02230: Debug Information: argv.arg5 = D_DEVICE_ACTIVITY_TYPE_EXT.DAT
RPE-02230: Debug Information: argv.arg6 = -p
RPE-02230: Debug Information: argv.arg7 = 1
RPE-02230: Debug Information: argv.arg8 = -s
RPE-02230: Debug Information: argv.arg9 = S
RPE-02230: Debug Information: argv.stdin =
RPE-02230: Debug Information: USERPROFILE = C:\Windows\system32\config\systemprofile
RPE-02230: Debug Information: JAVAPATH = C:\product\11.2.0\dbhome_3\jdk6
RPE-02230: Debug Information: NODEID = 1
RPE-02230: Debug Information: IAS_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: SystemDrive = C:
RPE-02230: Debug Information: RTHOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: Path = C:\product\11.2.0\dbhome_3\bin;C:\product\11.2.0\dbhome_3\jdk6\jre\bin\client;C:\product\11.2.0\dbhome_3\jdk6\jre\bin;C:\product\11.2.0\dbhome_3\owb\bin\admin;C:\Windows\system32
RPE-02230: Debug Information: CONNECT_SPEC = 10.34.32.136:1521:MDM
RPE-02230: Debug Information: PROCESSOR_REVISION = 1a05
RPE-02230: Debug Information: OCM_ORACLE_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: USERDOMAIN = WORKGROUP
RPE-02230: Debug Information: ALLUSERSPROFILE = C:\ProgramData
RPE-02230: Debug Information: TMP = C:\Windows\TEMP
RPE-02230: Debug Information: CommonProgramFiles = C:\Program Files\Common Files
RPE-02230: Debug Information: PROMPT = $P$G
RPE-02230: Debug Information: PROCESSOR_LEVEL = 6
RPE-02230: Debug Information: JVM_OPTIONS = -Xmx768M
RPE-02230: Debug Information: LOCALAPPDATA = C:\Windows\system32\config\systemprofile\AppData\Local
RPE-02230: Debug Information: COMPUTERNAME = INT-A-MDM-01
RPE-02230: Debug Information: SystemRoot = C:\Windows
RPE-02230: Debug Information: ORA_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: USERNAME = INT-A-MDM-01$
RPE-02230: Debug Information: APPDATA = C:\Windows\system32\config\systemprofile\AppData\Roaming
RPE-02230: Debug Information: ProgramData = C:\ProgramData
RPE-02230: Debug Information: PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
RPE-02230: Debug Information: ORACLE_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: RTUSER = OWBSYS
RPE-02230: Debug Information: ProgramFiles(x86) = C:\Program Files (x86)
RPE-02230: Debug Information: TEMP = C:\Windows\TEMP
RPE-02230: Debug Information: OEM_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: ProgramFiles = C:\Program Files
RPE-02230: Debug Information: JDK_HOME = C:\product\11.2.0\dbhome_3\jdk6
RPE-02230: Debug Information: OCM_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: ProgramW6432 = C:\Program Files
RPE-02230: Debug Information: PROCESSOR_IDENTIFIER = Intel64 Family 6 Model 26 Stepping 5, GenuineIntel
RPE-02230: Debug Information: STARTUP_TYPE = -manual
RPE-02230: Debug Information: PROCESSOR_ARCHITECTURE = AMD64
RPE-02230: Debug Information: OS = Windows_NT
RPE-02230: Debug Information: FP_NO_HOST_CHECK = NO
RPE-02230: Debug Information: CommonProgramW6432 = C:\Program Files\Common Files
RPE-02230: Debug Information: ORACLE_SID = mdm
RPE-02230: Debug Information: DISCOVERER_ALLOW_DB_CONNECT_STRING = YES
RPE-02230: Debug Information: OWB_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: NUMBER_OF_PROCESSORS = 2
RPE-02230: Debug Information: PUBLIC = C:\Users\Public
RPE-02230: Debug Information: PSModulePath = C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
RPE-02230: Debug Information: CommonProgramFiles(x86) = C:\Program Files (x86)\Common Files
RPE-02230: Debug Information: ComSpec = C:\Windows\system32\cmd.exe
RPE-02235: The operating system has reported that it cannot execute the requested command. This may be because the command or the parameters are invalid, or that the command is shell command. Any result code return is specific to the operating system. Debug information has been produced.
Cannot run program "/usr/bin/perl": CreateProcess error=2, The system cannot find the file specified
OUBIWF_D_DEVICE_ACTIVITY_TYPE:EMAIL_FILEMGR 1 2012-07-04 16:57:40.0Parameters
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 267
ORA-06512: at "SYS.UTL_SMTP", line 161
ORA-06512: at "SYS.UTL_SMTP", line 197
ORA-06512: at line 8Hi There
Am experiencing the same issue. Did you manage to resolve it, is so can you advice what the resolution is. Thanks
Regards,
Kayode -
Unable to run the oracle Process Manager service
Unable to run the services of
1) oracle Process Manager service(EPM_epmsystem1)
2) Oracle Process Manager (ohsInstance1649849633)
error message is displayed as below.
Error 1053 the service did not respond to the start or control request in timely fashion.
Thanks.–> Start NodeManager from the Command Prompt
Cd bi0104\wlserver_10.3\server\bin
startNodeManager.cmd
Wait untill you see message “Secure socket listener start at port……”
–> Start Admin server from command prompt
Cd bi0104\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password. Specify the user details that you used at the time of the Oracle BI 11g install. You could also use a ‘Boot Identity File’ -(boot.properties). Check the documentation for more details.
Wait untill you see message Admin server is in ‘RUNNING MODE’.
–> Now start Managed server from GUI
Access WebLogic console from a webbrowser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for the Managed server to start. Wait untill you see the ‘Running’ status.
–> Now start the OBIEE components from command prompt
Cd bi0104\instances\instance7\bin
opmnctl startall
Note that it’s a possible startup sequence. There are multiple ways to statup.
i am getting all above messages all but not getting oracle process manager up in the services.msc
error : not getting up in timely fashion -1053
thanks
Edited by: user11165720 on Apr 1, 2011 4:24 AM -
I have re-installed Solaris 10 on an x4200, but after I finished the install I receive this errors:
SunOS Release 5.10 Version Generic_118855-33 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: BIOS microcode patch for AMD Athlon(tm) 64/Opteron(tm) processor
erratum 131 was not detected; updating your system's BIOS to a version
containing this microcode patch is HIGHLY recommended or erroneous system
operation may occur.
Aug 13 18:12:47 svc.startd[7]: svc:/platform/i86pc/eeprom:default: Method "/usr/sbin/eeprom -I" failed with exit status 255.
Aug 13 18:12:47 svc.startd[7]: svc:/platform/i86pc/eeprom:default: Method "/usr/sbin/eeprom -I" failed with exit status 255.
Aug 13 18:12:47 svc.startd[7]: svc:/platform/i86pc/eeprom:default: Method "/usr/sbin/eeprom -I" failed with exit status 255.
Aug 13 18:12:47 svc.startd[7]: platform/i86pc/eeprom:default failed: transitioned to maintenance (see 'svcs -xv' for details)
# svcs -xv
svc:/platform/i86pc/eeprom:default (EEPROM emulation)
State: maintenance since Thu Aug 14 14:33:57 2008
Reason: Start method failed repeatedly, last exited with status 255.
See: http://sun.com/msg/SMF-8000-KS
See: man -M /usr/share/man -s 1M eeprom
See: /var/svc/log/platform-i86pc-eeprom:default.log
Impact: This service is not running.
Does anyone know how to fix this issue or why this happened? I've never seen this before.
THanks
Edited by: wb on Aug 14, 2008 11:31 AM
Edited by: wb on Aug 15, 2008 5:09 AMWhat is the impact and which other services are dependent on VT-x AMD in XVM? We have been using the same procedure to install Solaris 10 to all our servers, and we have never experienced this issue. Does anyone know the source of this?
Maybe you are looking for
-
Neither Safari nor Firefox can view PDF files on the web - they appear blank?
Starting a couple of weeks ago, now when i'm at a web site and I click on a link that is a pdf, the screen is blank dark gray. I closed Safari and opened firefox and tried to see if that would work. Firefox also didn't display the pdf, just a blank
-
I just lost my phone and I'm in a foreign country. I'm thinking I won't get it back, but I'm trying to log on to icloud.com to use find my iphone app. However for whatever reason the same Apple ID has a different password for itunes and icloud. I hav
-
I am unable to email a hot link
When I want to send a link to someone by email, it is not in a form that someone can quickly click on to access. It has to be copied and pasted instead. Please advise on how to correct this.... it works fine when I use Internet Explorer.
-
I cannot download Photoshop CS6 from the cloud
I had a beta version of Photoshop CS6 on my Macbook (OS X 10.7.4) and forgot to uninstall it before downloading Photoshop CS6 through the Adobe Application Manager. When I tried to download Photoshop CS6 I received an error message in the Adobe Appli
-
Opening multiple selected files in an app via Services
I have a simple service that opens a file in an app that renames the file. (the app was created with A Better Finder Rename) It works when a single file is selected, but if I select multiple files it only renames the last file that was selected and