Unable to save images linked to from InDesign CS4

A very annoying issue. If images are linked to from InDesign, and a user on the network has opened that InDesign file, changes to the image cannot be saved. On a mac we get a warning that the file is 'in use'. The PCs give no warning, and apprently save the changes made in Photoshop or Illustrator. However, the changes are not saved. It make no difference whether the InDesign file is still open or has been closed. The only way to get round this problem that we have found is to either save as a new image name and re-link to that, or to close down InDesign on the offending workstation and then re-open after the image has been saved.
This might be a similar issue to that described in this discussion:
http://forums.adobe.com/message/2015431
I've opened a new discussion, as the one in the link above is shown as partially answered, but I cannot see an answer which helps us.
Anyone got a solution?

I'm not sure if it sounds the same or not, but it sure doesn't sound "normal," but I don't work much with network-stored images and other users who might have linked to them. As far as I know there is nothing in link in ID that would cause it to appear to be open, but as I see inthe other thread I once had the problem myself, so who knows.
Are you patched to 6.0.6? I don't see anything in the release notes specifically related to the can't save problem, but there were a number of image and link related fixes.

Similar Messages

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

"Save as pdf" button from InDesign

Is it possible to make a "save as pdf" button from InDesign ?
Best regards, Mette Louise

Well, I'd say that, but if the button is to run Acrobat JavaScript it comes back to an Acrobat forum. But my question is: what would it do? The file is already a PDF.

Custom Metadata panel to show linked graphics from InDesign files?

Hello all,
I'm looking to create a custom Metadata panel to show linked graphics from InDesign files. I'm not even sure if this is possible. Can someone please point me in the right direction? I figure if you can see the fonts used in an InDesign file, you should probably be able to pull the links, right?
Thanks for any and all help!

Have you tried trashing the prefs? See Replace Your Preferences
And of course it's essential that the links be up to date.

Hi I am using MAC OS Yosemite 10.10.2. I am unable to save images post processing in CC 2014. Error given - "Unable to save image Write Access not granted"

I am a new user to the Photoshop CC 2014. I am unable to save images post processing. Error given is "Unable to save image Write access not granted". Can some one please help me with this.
I am using Mac OS Yosemite Version 10.10.2
Regds
Shashi

In a finder window highlight and right click the folder you are trying to save to and select Get Info. In the window that opens look at the bottom to see if you have Read/Write permissions. If you don't click the Plus sign and add your Admin Username to the list and give it full Read/Write permissions.
Open Disk Utility and on the First Aid tab select Repair Permissions and let it run.

Cannot print to Adobe PDF from InDesign CS4 under Snow Leopard (10.6.2)

Hello All,
Hopefully the subject line says all. Running SL and CS4, and after manually deleting the "old" Adobe PDF 9.0 driver, I am unable to print to PDF — or select "Save As Adobe PDF" under the Mac OS print dialog. This is insanely frustrating on may levels, as this was once a 3-minute operation and now has stretched into two days of futile searching for a solution.
There is a "tech doc" somewhere out there that offers a "solution". But beware, as it has not worked for me. Once you manually search for and remove the Adobe PDF 9.0 driver, you are supposed to magically be able to select the "Save As Adobe PDF" option. This is not the case for me.
Am trying to print, once again, from InDesign CS4 (NOT via the Export command as that will not allow me to set page size, or print separations). There is no Adobe PDF driver there anymore and there is no option to print PDFs. Of course, I can rest easier with the knowledge that everything is easier now in SL.

For a long time I was printing out of InDesign CS4 to a PS file and Distilling to a PDF, either composite or separated. Then Snow Leopard came along and that workflow seemed no longer available. It seems some well meaning people didn't understand a professional DTP workflow.
I had to work between two Macs to create a project and then make separations.
Eventually I went back to the Adobe InDesign forums and folks insisted that a Adobe PDF 9 printer should be available in my print drivers.
On that suggestion I completely uninstalled Adobe Acrobat Pro 9 and then reinstalled it.
It worked, I had the PDF printer back and can now print to a postscript file and do separations as I always have.
(Another story is that Snow Leopard killed my Epson 2200 printer)
At one stage I did an update of Acrobat 9 and it caused me to lose the Adobe printer again. Going through the procedure again brought it back and this time after a Acrobat 9 update it stuck.
In my opinion somebody screwed up. It's not enough to be able to create PDFs out of Microsoft Word. There are people out here trying to make a living and need to be able to create print separations for some offset printers.

Transferred CS4 to new MacBook Pro, now some fonts will not work when PDFing documents from InDesign CS4. Help!

I recently purchased a new MacBook Pro. I transferred my CS4 from my older MacBook Pro to my new computer, and although it seemed to be working fine now some fonts will not work when PDFing documents from InDesign CS4. These fonts are installed on my new computer, can be found in InDesign CS4, and work fine within the program but will not appear in PDFs. The letters turn into rectangles. Does anyone know why, and how to fix that?
Help/input would be much appreciated. Thank you!
Kristen.

you should properly install adobe products, not move, migrate or otherwise transfer them.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

New problem printing from InDesign CS4 in Lion

After having great success with Aisolve's earlier fix on printing from InDesign CS4 after upgrading to Lion, I'm having a new problems after installing the OS X 10.7.2 upgrade last week. When I try to print from InDesign CS4 and Illustrator CS4 to my Lanier 445c/Ricoh C4500 at my workplace I get the following error message:
"Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem."
This seems like a different issue this time, as I'm able to print to my home printers, an HP LasertJet 2600n and an HP Photosmart C4270. I thought it might be a printer driver problems, but I've gone to Lanier's site and they don't have any new printer drivers for Mac OS X 10.7.
I also some research on Adobe's site, and found this message affecting CS1, 2 & 3. I tried the only fix that seemed to apply to me, which was re-naming/deleting the InDesign Deafults and InDesign SavedData files. (I have this problems even when I'm printing a text-only file without any graphics.) This fix didn't work.
I can print to the Lanier/Ricoh from Acrobat 9, and all my non-Adobe software just fine, so my work-around to date has been exporting to PDF and printing from there. My big problem is that I need the "Print Booklet" feature in InDesign for a big job I've got coming up this week. Can't do that from Acrobat. :-(
Any help would be greatly appreciated!

mmsteer,
I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
Remove the Adobe PDF PPDs from the following folders:
OS/Library/Printers/PPDs/contents/Resources/en.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
Be sure to go to your system Library, not your user Library.
Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.

How to create a smallest file size pdf from indesign CS4 document

How to create a smallest file size pdf (suitable for upload to a website) from indesign CS4 document which contains multiple illustrator CS4 illustrations.
I have chosen the "smallest file size option" but the pdf file is over 30MB, can anyone help please.
Thank you

One trick is to
Set the placed graphics to have a transparency of 99.9% (you can do this with Find/Change and select Objects)
This is enough to force the graphics throught the Transparency Flattener
Next set the Transparency Blend Space to RGB (Edit>Transparency Blend Space)
Next set a custom Transparency Flattner Preset Edit>Transparency Flattner
Next
Use File>Export and choose
Smallest file size
PDF Compatibility Acrobat 4 (PDF 1.3)
In Advanced Section - go to transparency and selec the new Flattener Preset you created.
*this will convert your vectors to raster, but it should reduce your file size

Links do not appear in links panel in inDesign CS4

I don't recall when this happened but I no longer have any links in the Links Panel in inDesign CS4 in ANY of my documents old, new, it doesn't matter. If I package a file it gathers all the links if I need to update a link I have to go to the original link outside of inDesign to find it. I have found other problems like this in other forums but have not been successful with the solutions.
Can anyone please please help me with this??
Thanks
Marilyn Glisci

Replace Your Preferences

Can you have a PDF fit on the viewer's screen automatically when exporting from InDesign CS4?

Can you have a PDF fit on the viewer's screen automatically when exporting from InDesign CS4?

If you were to upgrade to InDesign CS5 or CS5.5 and if you exported as Adobe PDF (Interactive), you could set the View settings for Page Layout and Zoom.
While, as Jongware points out, its possible for individual users to override that option (Preferences > Page Display > Default Layout and Zoom), the number who will actually do that is actually very tiny.

Scaling issue when printing to HP devices from InDesign CS4

I seem to have a recurring error printing from InDesign CS4 (OS X Leopard 10.5.8) to both my HP printers (C3180 & Officejet Pro 8500). When printing at 100% size, the artwork gets scaled up slightly. For example, creating a simple 5 x 5" box ends up coming out at 5.125 x 5.125" on the printed sheet (with no scaling turned on in the print dialogue).
I've not been able to find any support issues related to this on either HP or Adobe's site. I suspect it's s driver/postscript incompatability issue. The same artwork prints at the correct size when exporting to PDF and printing from Acrobat.
Curious if anyone else is experiencing the same problem.

A large percentage of problems we see related to printing seem to be with HP printers. Are you doing borderless or anything like that? What is the page size and scaling in the driver?

Exporting JPEGs from InDesign CS4

I've exported jpegs from InDesign CS4 for years and each time I get an Export JPEG dialog box that gives me the option to adjust the resolution. Suddenly, when I export to JPEG, I get no dialog box and it automatically creates a JPEG at 300 dpi. I've looked everywhere in Preferences to see if I inadvertently changed settings, but I find nothing. Help?

Try this forums.adobe.com/thread/526990

Upgrading from InDesign CS4 to CS5.5

How much would it cost to upgrade from InDesign CS4 to CS5.5

There is no longer any official upgrade for any version of InDesign. The only offerings from Adobe now are Creative Cloud subscriptions (which currently provide access to both CC and CS6 versions), or purchasing a perpetual license for CS6, at full price, with the understanding that CS6 is considered "feature complete" and will not receive any further updates and may not work on the next OS releases or new generations of hardware.

Maintaining Text Formatting from Indesign CS4 to Illustrator CS4

Hey folks,
I'm trying to transfer copy a section of text with bullets from InDesign CS4 back into Illustrator CS4. When I copy it over to Illustrator, I lose my bullets. I know I could do this in CS3 and maintain the bullets, but the approach I used in CS3 doesn't work for CS4.
Anyone know how to pull this off without me having to go into Illustrator and kluge together some bullets from scratch?
Thanks!
-Dusty.

Thanks for the response Bob.
How do I convert my Indesign bullets to text, or are you saying I need to create them as Wingdings or somesuch and not as actual bullets?
The bullets are the main issue, but my formatted text isn't transferring either. The text I paste from Indesign to Illustrator removes the formatting I had in Indesign (e.g., font-family, size, etc.)
Thanks,
-Dusty.

Unable to save images linked to from InDesign CS4

Similar Messages

Maybe you are looking for