Unable to see demand history in APO SPP via transaction /SAPAPO/SPPMDH

Hello
We are trying to view aggregated sales history data in APO SPP via transaction /SAPAPO/SPPMDH
We have loaded sales order data from flat file into DSO 9ARAWDAT & infocube 9ADEMAND. We can see the data in the cubes & also via the standard queries attached to 9ADEMAND cube.
Also we are able to adjust sales order item level data via transaction /SAPAPO/SPPMRD: Adjust Raw Data .
However we are unable to see any data when we try to adjust aggregated demand history via transaction /SAPAPO/SPPMDH.
The replenishment indicator is stocked & the forecast periodicity is maintained as well.
Could you please let us know if anything is missing? Thanks in advance

Santanu Paul wrote:
Hello
>
> We are trying to view aggregated sales history data in APO SPP via transaction /SAPAPO/SPPMDH
>
> We have loaded sales order data from flat file into DSO 9ARAWDAT & infocube 9ADEMAND. We can see the data in the cubes & also via the standard queries attached to 9ADEMAND cube.
>
> Also we are able to adjust sales order item level data via transaction /SAPAPO/SPPMRD: Adjust Raw Data .
>
> However we are unable to see any data when we try to adjust aggregated demand history via transaction /SAPAPO/SPPMDH.
>
> The replenishment indicator is stocked & the forecast periodicity is maintained as well.
>
> Could you please let us know if anything is missing? Thanks in advance
Hello,
Check this stuff (from help.sap.com) we had a quite similar issue, until we've fixed it:
For the demand categories we defined to be in your system, you have transferred the DataSources 9ADEM_CAT and 9ADEM_CAT_TXT as well as InfoSources 9ADEM_CAT and 9ADEM_CAT_TXT to the Business intelligence system (BI system) in SAP SCM and activated them. You have transferred the following InfoPackages for these InfoSources:
● Load Master Data from APO
● Load Texts for Demand Categories from APO
Note
Each time you change the relevant for forecast indicator of a demand category, you have to reactivate the master data of characteristic 9ADEM_CAT.

Similar Messages

Unable to see planned order in APO

Dear Experts,
I'm creating a Project manufacturing order in ERP. After that I do MRP run in SCM7.0. When I check in Product View (transaction /SAPAPO/RRP3), I do not see any planned order, though I can see orders in ERP (Tcode-md04).
I guess transfer of network to APO is not happening.
Same problem arises when I schedule a dummy project in ERP and after I do MRP run in SCM7.0, I do not see any planned order in planning board.
The MRP run in SCM7.0 shows no error and no warnings and everything appear in green.
I was able to see planned orders in APO before there was system upgrade from SCM 4.2 to SCM 7.0.
Please provide some clue to solve this problem.
Regards,
Jyoti

Hi Jyoti,
There will be an "Iterate" button on the left hand corner in the result display of CCR. Please click on this button so that these errors will get iterated and goes to the respective distinations. After this, you go to smq1 and smq2 trasnaction codes of R/3 and clear all the queues. Similarly you clear the queues in smq1 and smq2 transaction codes of APO. Afterwards, check whether you are able to see the planned order.
Please confirm
Regards
R. Senthil mareeswaran.

I am unable to see my Airport Extreme/Express on my MacBook via Airport Utility

I have two issues:
1. I am unable to see my Airport Extreme and my Airport Express via my MacBook Air's Airport Utility when I scan for Base Stations. However, the computer is happily connected to the wireless network of my Extreme (the Express is used to extend range)
2. I am unable to see a HDD that is connected via USB cable to the Airport Extreme.
Any suggestions welcome.
Thanks

Further info:
Setup
MacBook Air running OS X 10.5.8
AirPort Extreme Base Station
AirPort Express used to extend range
AirPort Utility v5.5.3
The MacBook Air is actually connected to the wireless network provided by the two AirPorts!
Oddly, I see both AirPorts just fine when using my older PowerBook G4 with an older version of the AirPort Utility.
In addition, I cannot see the external HDD connected to the AirPort Extreme Base Station, and my wireless printer (HP D410a) suddenly stopped working via the MacBook Air. However, it works just fine from my iPhone, which is connected to the same AirPort Extreme/Express wireless network.
Recently, at the request of Sky Broadband, I switched to fixed IP addresses instead of DHCP, as I was having issues with the DHCP set-up.

APO SPP: No Historical Forecast visible in transaction /SAPAPO/SPPFCSTTRACK

Hello
I am trying to view historical forecast data via transaction /SAPAPO/SPPFCSTTRACK in APO SPP. However i get the message "No hist. fcst time series can be determined".
The forecast strategy is correctly assigned to the product & the standard deviation period is populated as 12 months.
The forecast periodicity is months.
When I execute the forecast using planning service manager or interactively, it correctly calculates the forecast in future as well as ex post forecast in the past. I believe the historical forecast is calculated immediately with the forecast run.
Can anyone help to identify if some setting is missed or any specific planning service is required to be executed to enable historical forecasting. Thanks in advance

Hi,
If the transaction /SAPAPO/SPPFCSTTRACK does not provide any information regarding Historical Forecast data (while you have already performed the forecast for the certain location product) then you probably haven't created a new forecast with a different model. For example, if you created the first forecast with Moving Average then you need to change the Forecast Strategy to an another one (or run Automatic Model Selection which should also select a different strategy). In case when the new Forecast Strategy differs to the previous one, then the appropriate trigger (SPP_FCSTMODEL_CHANGE) will be created for recalculation of the Historical Forecast. Of course, if the trigger is created, you also need to run a PSM service for the recalculation which should be configured for the location product you need to process.
(You can find more information regarding this [here|http://help.sap.com/saphelp_scm50/helpdata/en/43/300e47bd9e2227e10000000a422035/frameset.htm].)
Best Regards,
Zsolt
Edited by: Zsolt Csoka on Jul 14, 2011 11:06 AM

SAP SCM SPP- Demand not visible in the fcsting & adjust demand history scrn

Hi,
I am working on SCM 5.0 in a test environment.
I had loaded the sample test data using csv file. The data is visibile in the both multiprovders.
9ARAWMUL AND 9ADEMMUL( in txn rsa1)
Also in the transaction : /sapapo/sppdmrd- i can see the raw data history
But for the same selection paramter i can see any data in sapapo/sppdmdh- adjust demand history.
Can somebody help?
Regards,
RM

Hi Rupal,
Did you get a resolution to this problem? Please share some insights. We are faced with similar sircumstances here with SPP.
Thanks
Sooraj

Import a csv file into demand history

Hi SAP Friends,
we are sitting here for hours and just don´t get any further... Our problem is, we have written a csv file according to this example:
Executing Loc. Type CHAR 4 CRMELOCTYP - 1002
Cus-Facing Loc. Type CHAR 4 CRMFLOCTYP - 1002
Type 1st Stockh.Loc. CHAR 4 CRMFSTLTP - 1002
Order Qty: Sls Units QUAN 17 CRMORDQTYV - 1000
Pl. GI Date (Req.) DATS 8 CRMPGIDATW - 20061010
Pl. GI Time (Req.) TIMS 6 CRMPGITIMW - 200000
Customer-Facing Loc. CHAR 20 CRM_FACLOC - LOC1
1st Stockholding Loc CHAR 20 CRM_FSTLOC - LOC1
Transaction Created DATS 8 CRM_ITCRAT - 20061010
GUID of a CRM item CHAR 32 CRM_ITMGUI Check - PROD1
Item Transaction Typ CHAR 4 CRM_ITMTYP Check - NORM
Item Category Usage CHAR 4 CRM_ITMTYS Blank
Use:Higher Level Itm CHAR 2 CRM_ITMUSE Blank
Abnormal Demand CHAR 1 CRM_NOTNRM Blank
Item No. Order Doc. NUMC 10 CRM_NUMINT Check - PROD1
No. of Doc Items INT4 10 CRM_NUMOFI Check - 1
Transaction Number CHAR 10 CRM_OBJ_ID Check - PROD1
GUID CRM Order Obj. CHAR 32 CRM_OHGUID Check - PROD1
Parent item CHAR 32 CRM_PARITM Blank
Business Trans. Type CHAR 4 CRM_PRCTYP Blank
Denominator INT4 10 Put 1 - 1
10th Exponent INT4 10 Put 1 - 1
Numerator INT4 10 Put 1 - 1
Reason for Rejection CHAR 2 CRM_REJECT Blank
Requested deliv.date DATS 8 CRM_REQDAT - 20061016
Goods Recipient CHAR 10 CRM_SHIPTO - CUST1 (Not created in master)
Source System CHAR 10 LOGSYS - EXCEL
Material CHAR 18 MATERIAL - PROD1
Update Mode CHAR 1 RECORDMODE - F
Sales unit UNIT 3 SALES_UNIT - EA
Product CHAR 32 CRM_PROD - PROD1
Base Unit UNIT 3 BASE_UOM - EA
Product ID CHAR 40 CRMPROD_ID - PROD1
and have also imported this file into the demand history, but the "order quantity" is missing as well as the whole file in the "manual adjustment of raw data". Does anyone know, what´s the problem??
Thank you so much in advance,
Almi

Hola Anjali,
First of all, thank you for your quick answer.
I don´t think that there is anything missing in the CSV file. We are using SPP and also have the SCM 5.0. See if we load the file into SPP neither the order quantity, nor is the file in the "manual adjustment of raw data" is shown . What do u mean by downloading and uploading?
Thank you,
Almi

Finding Product Demand in SCM/APO

Does anyone have any idea on where I can read data regarding to history of demand for a product on the SCM side? I'm working on a report that requires "detailed demand history" for 12 months and for 24 months, and is run within SCM only. In ECC that is a table MVER that shows demand by period for a product. I'm looking for something similar to that. Thank you for your help.

Typically one should have implemented APO DP module to see history and for this it would be important to import this data into APO.
In SNP, you can view open sales orders but not the ones that have been post goods issued.
Overall, you would need to activate quite a few things to see Product Demand in APO.

Advantages of Implementing Demand Planning in APO

Hi All:
One of our company's business units is exploring the possibility of implementing their Demand Planning in APO. Since their business closely resembles retail, they do not run MRP in ECC to replenish. Instead they do Kanban for replenishment. Hence they do not need Independent requirement in ECC.
The as-is forecast model is a simple spreadsheet that they use that is used for financial forecasting. They have a lots of SKUs and with spreadsheet aggregation and disaggregation is a night mare. Hence they have products sitting in their inventory, worth millions of dollars that has not been sold yet for a year. In essense the top-level forecast data has too many errors. They also use this to forecast how much of components they have to procure. Again, they have millions of dollars work of components sitting in our inventory.
So, they are looking to implement their DP in some other software. Since we have APO, APO could be a choice. But we have to justify the cost involved.
They will not need APO to send back IR back to ECC.
Followiing are the benefits we see:
1. Highly integrated with ECC and hence forecasting will be based on their Sales and invoice history.
2. Since their products are seasonal, APO can offer advanced forecast methods to forecast SKUs as accurately as possible.
3. Ease of use.
4. Right now, the spreadsheet is accessible to one user at a time and been shared thru emails. This will change with APO
5. They could use DP-BOM to forecast component and help reduce components inventory
6. An integrated system that will sent forecast to CO-PA on a monthly basis.
Can you guys help me with anything else that will benefit the business? Any input will be of great benefit.

Hi,
before to begin: I don't really understand what you are saying: you say the forecast is not use for planning, however your think it is the cause of overstock... how can that be?
I understand the logic for componenents, but not for finish good here
Anyway, regarding your questions:
Of course DP will help you too, and the benefits you emntioned are good.
However I suggest you to do a bigger analysis of your business needs... it looks ot me that you will need more than DP.
You could use SNP to plan your finish good and components (or use a strategy such as planning at assembly level).
If your biggest challenges in inventory level then SNP is the tool that will give you a better visibility here.
I personnally think that DP BOM should be use only is specific cases. You better have to plan your component in SNP, which will be far more flexible.
In one sentence, I think that if you do decide for a DP implementation now, you biggest benefit should be: later on you will be able to use SNP for planning.
Well that is what I think....
Good luck for your challenges!
Julien

5800 XpressMusic - V 50.0.005 - Unable to see all ...

I recently updated my phone 5800 XpressMusic to latest firmware V 50.0.005 (Customer Version 50.0.005.C03.01) but I am unable to see many changes. The only changes that I notice are - kinetic scrolling, change in the way browser displays the page and music library. Are these the only changes? Is there a way to check officially, what all changes, is this new firmware supposed to bring in?

there are many conflicting reports of whats new
here is some of them
1.Music player is cool... it has been completely changed with albumart mini view in all songs and album sections ... it is now like nokia n97 music player
2. Menu has kinetic scrolling
3. Quick office integrated
4. Hide option in music player in place of exit
5. Music player refreshes fast
6. New 1 touch dialling and call settings options in dialler
7. Camera quality is little improved
8. There is an option to uninstall quick office from phone too
9. Ovi sinc application added
10. Option for history list (on off) in web browser
11. Option to send webpage via message blutooth in webbrowser
12. Get rihanna link in webbrowser
13. Kinetic scrolling in webbrowser
14. Browser 7.2
15. Lifecasting (with Maps 3.0T SR3.0)
16. Flash Video Phase-3-Flashlite 3.1.7.x
17. Gimlet Touch 2.2
18. Enable Side lock Key functionality during Swipe UI (Calendar/Clock)
19. Windows 7 Device Stage Support
20. OVI store 1.5.6
21. Cherry v2.1
22. OVI contacts 1.50.8
23. Workaround for Niagara (SMD) display module for DFS52.50 based products
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Unable to download purchase history

unable to download purchase history

If I understand you, you either want to re-download your Books or can't find them in the 'Purchased' section of iTunes.
To re-download your books connect your iPhone/iPad to iTunes via USB cable and open iTunes. click 'PURCHASED' from the 'QUICKLINKS' section on the far right hand side of your iTunes screen, select BOOKS from the menu bar and then select the book/s to download from the list and click DOWNLOAD.
If you can't see the books listed on this page then check you have 'ALL' selected from the ALL | NOT ON THIS COMPUTER options which are located on the top right hand side of the page.
Hope that helps.

Not able to see the history period and data

Hello
I have 2 time planning bucket periods - history of 24 months and future 14 months.
have assigned both in the data view.
i have loaded the data from infocube to planning area and i got the successful message.
during the transfer i have used the key figure assignment feature and used my key figure which is zhistory.
i have not used 9AVHISTORY.
my issue is i am not able to see the history periods and hence not able to see the data in history.

Hi
The data get loaded and its also available in the planning area, as you defined the time bucket profile according it i.e.24 month in past and 14 month in future. Its only while definition of data view you have not defined these flags you were unable to view this data.
Hence as I mentioned data has correctly loaded in the planning area just not getting viewed.
I hope this answers your question.
Thanks
Amol

PRoblem in APO SPP with BDC in Schedule Maintainence

Hi All,
We have a requirement for mass maintainence of schedule in the Tcode : /SAPAPO/SPPDRPSB in APO-SPP system .
We are not able to make the BDc for this Tcode while LSMW and S-Catts are also not working..
Please let me know anyother way through which this can be done .
Thnks
Sahil

Thanks Nitin,
i hv checked transaction /SAPAPO/AC06 but there is no temorary qty assignment.
Also, the PO is for 1 quantity againest which the delivery has been created. Hence, am unable to change the PO in r/3 now?
Plz let me know what is other alternative to solve the error?
with rgds/
Jay

Stat forecast got generated without any order demand history

Hello ,
I have a issue came in , where we are seing a Stat forecast got generated without any order demand history. Is there any forecast strategy avaialable which can cause it.
Any hint is appreciated.
Regards
Deven

Hi Deven,
may be due to some redundant data this issue is coming.
Just write a simple macro and Give ROW_INPUT (0) to your history keyfigure .This will zero out the data for your "History" keyfigure.
Again try to generate stat fcst see what is coming.
Hope this will resolve your query.Same is the case happen with me i tried the same thing which i mentioned here.
Regards,
Nitish Panchal

Unable to see interface on ASA 5510 Firewall

Hi All,
I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
Below is the output.
ciscoasa# sh int ip br
Interface                  IP-Address      OK? Method Status                Protocol
Ethernet0/0                x.x.x.x           YES CONFIG up                    up
Ethernet0/1                x.x.x.x           YES CONFIG up                    up
Ethernet0/2                unassigned      YES unset administratively down down
Internal-Control0/0        127.0.1.1       YES unset up                    up
Internal-Data0/0           unassigned      YES unset up                    up
Management0/0              192.168.1.1     YES CONFIG up                    up
Please suggest what could be the reason.
Regards
Pankaj

Hi Ramraj,
Even i have the base license for my ASA 5510 which is showing all the 4 interfaces in sh ver. I don't think so license would be an issue. There should be some IOS code bug that needs to be upgraded. If this goes for an OS upgrade it should get resolved.
Its not showing up in sh ver . As Karsten said he might be running on old IOS version.
fy-a# sh ver
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 6.4(5)
Compiled on Thu 14-Jun-12 11:20 by builders
System image file is "disk0:/asa844-1-k8.bin"
Config file at boot was "startup-config"
fy-a up 1 day 1 hour
Hardware:   ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
                             Number of accelerators: 1
0: Ext: Ethernet0/0         : address is 2c54.2d0c.8f1a, irq 9
1: Ext: Ethernet0/1         : address is 2c54.2d0c.8f1b, irq 9
2: Ext: Ethernet0/2         : address is 2c54.2d0c.8f1c, irq 9
3: Ext: Ethernet0/3         : address is 2c54.2d0c.8f1d, irq 9
4: Ext: Management0/0       : address is 2c54.2d0c.8f1e, irq 11
5: Int: Not used            : irq 11
6: Int: Not used            : irq 5
Licensed features for this platform:
Maximum Physical Interfaces       : Unlimited      perpetual
Maximum VLANs                     : 50             perpetual
Inside Hosts                      : Unlimited      perpetual
Failover                          : Disabled       perpetual
VPN-DES                           : Enabled        perpetual
VPN-3DES-AES                      : Enabled        perpetual
Security Contexts                 : 0              perpetual
GTP/GPRS                          : Disabled       perpetual
AnyConnect Premium Peers          : 2              perpetual
AnyConnect Essentials             : Disabled       perpetual
Other VPN Peers                   : 250            perpetual
Total VPN Peers                   : 250            perpetual
Shared License                    : Disabled       perpetual
AnyConnect for Mobile             : Disabled       perpetual
AnyConnect for Cisco VPN Phone    : Disabled       perpetual
Advanced Endpoint Assessment      : Disabled       perpetual
UC Phone Proxy Sessions           : 2              perpetual
Total UC Proxy Sessions           : 2              perpetual
Botnet Traffic Filter             : Disabled       perpetual
Intercompany Media Engine         : Disabled       perpetual
This platform has a Base license.
Serial Number: JMX1AXXXXX
Running Permanent Activation Key: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Configuration register is 0x1
Configuration has not been modified since last system restart.
fy-a#
Ramraj please do correct me if am wrong.
Please do rate if the given information helps.
By
Karthik

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unable to see demand history in APO SPP via transaction /SAPAPO/SPPMDH

Similar Messages

Maybe you are looking for