Unable to see ESS content with an end user

Hi All,
When I try to see my ESS content with an end user, it is giving me the following error:
com.sap.xss.config.FPMConfigurationException: Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.skills/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.skillsapplication failed.
Part of the stack trace also says,
Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.skills/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.skillsapplication)
It is coming for all the applications in ESS.
I think it is a permission issue, so i gave the end user permission to the user in the PCD as well in the directory where all my ess contents have been kept.But still it doesn't work.
And only when I assign the end user with Admin right, it works which should not be the case.
Kindly suggest a possible solution for this.Your efforts will be appreciated.
Regards.

Hi Friend,
Could please let me know , how you have solved this issue.
I am alos facing the same
" com.sap.xss.config.FPMConfigurationException: Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.skills/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.skillsapplication failed"
Thanks in advance
Seranjeeve

Similar Messages

  • Unable to see page-content control filed in subsite level for responsive sharepoint site !!

    Hello.
    Actually, I am facing unexpected issue with responsive design package for SharePoint 2013 environment. I
    am done with lots of try here and there but no luck yet so finally putting my issue here to get the help on this.
    I have applied responsive design package from this codeplex solution - http://responsivesharepoint.codeplex.com/
    Which is working as expected , however when I add the following snippet in "Banded" Page layout , I am unable to see the Page Content field on pages at subsite
    level, however I can see the same field on root site pages of site collection.
    <!--CS: Start Page Field: Page Content Snippet-->
    <!--SPM:<%@Register Tagprefix="PageFieldRichHtmlField" Namespace="Microsoft.SharePoint.Publishing.WebControls" Assembly="Microsoft.SharePoint.Publishing, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>-->
    <!--MS:<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server">-->
    <!--PS: Start of READ-ONLY PREVIEW (do not modify)--><div id="ctl02_label" style="display:none">Page Content</div><div id="ctl02__ControlWrapper_RichHtmlField" style="display:inline" aria-labelledby="ctl02_label"><div align="left"><div nowrap="nowrap"><span nowrap="nowrap">Page Content</span></div><div><div>Page Content field value. Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.</div></div></div></div><!--PE: End of READ-ONLY PREVIEW-->
    <!--ME:</PageFieldRichHtmlField:RichHtmlField>-->
    <!--CE: End Page Field: Page Content Snippet-->
    can you please direct me to resolve this issue ? ( I wonder
    if anyone has face the same )
    Even , I don’t see the page content field in sub site pages for default "Blank Web part Page layout".
    I have also noticed that in responsive design webpart page layout is having only
    "Page Image" field in first row as shown in following screen:
    While in default publishign design , I can see many page content fields as shown
    in following screen:
    Is this by responsive design ? or Is there any problem in page layout - I am not sure !! :(
    Looking really forward for the resolution on this issue.
    Thanks and Best regards,
    Dipti Chhatrapati

    Hello,
    Just sharing the root cause of this issue which may help to others facing same.
    The reason behind this behavior was actually silly :) which is always the case once we know it !
    somehow , page content types was not having "Page-Content" filed rather it was using publishing columns but not page layout columns and hence I was unable to see the page layout columns in my page.
    Thanks and Regards,
    Dipti Chhatrapati

  • Can't see disk content with accounts set-up in Airport Extreme.

    Hello, all.
    I can't see the contents of a hard disk I have connected to my Airport Extreme and shared using accounts. Accounts have been set-up as Read & Write, and Read only, but finder window is empty. Disk mounts on the desktop but doesn't display its contents.
    What am I doing wrong ?
    Thank you in advance.

    Canle modem off, Airport Extreme off. Connect the modem and the extreme with ethernet cable. Power the modem. Wait about a minute, power the extreme. Use Airport Utility (in your Utilities folder) to set up the extreme. Review directions for the extreme as that will help.

  • Unable to see pdf files with Lion upgrade

    Since upgarding to Lion I've been unable to see my bank e-statements in Safari or Firefox. When the pdf file appears to load the result is a black statement in Safari and a white screen in Firefox. A right click does not allow me to download the file for viewing. When I spoke with their electronic support the said they have had many calls regarding this problem with newest OS X Lion upgrades. His suggestion was to uninstall or remove Adobe Reader v10.1.1 and allow Safari to read the files. Has anyone found a solution to this problem rather than completely abandoning Adobe Reader?

    Hi BDAqua,
    Thanks for the info, I dragged a PDF to desktop ctrl-, get info. change all to open with adobe.
    Problem solved, many thanks for a quick response.
    Barry69

  • MD04: Unable to see Purchase Orders with Item Category S

    Hi,
    Whenever we create Purchase Orders with Item Category S (3rd party), they are not visible in MD04 Stock Requirements list.
    Is there anyway we can get the Item category S Orders to be displayed in the MD04 list?

    Hi,
    I am unable to see Third party POs with open quantity also.
    If I create a PO with blank item category (i,e to stock, it will show in MD04)
    but if i create PO with item category S (it does not show in MD04)
    Can you suggest how we can get item category S POs to be displayed in MD04

  • Unable to map the portal user with back end user through web dynpro coding

    Hi All,
    I 've a portal user which is mapped to back end user by  system in the portal.
    i 'm able to get the portal user from web dynpro application.
    But unable to get the mapped back end user
    this is my code
    String systemalias = "SAP_CRM_PROD";
    Map mapattr = new HashMap();
              //     IPrincipal principal = (IPrincipal) request.getUser();
    //   get user user mapping information
    IUserMappingData userMapping =
                   //(IUserMappingData) UMFactory.getUserMapping().getUserMappingData(systemalias, principal, mapattr);
                   (IUserMappingData) UMFactory.getUserMapping().getUserMappingData(systemalias,principal,mapattr );
    //                  For testing purposes only
                   //mappingData = userMapping;
                   HashMap map = new HashMap();
                   userMapping.enrich(map);
                   mappedPassword = map.get(UMAP_KEY_PASSWORD).toString(); //String "user"
                   mappedUserId = map.get(UMAP_KEY_USER).toString(); /
    following is the error reported .
    The project was not built since its classpath is incomplete. Cannot find the class file for javax.xml.soap.SOAPMessage. Fix the classpath then try rebuilding this project.
    please help.

    Hi Sanjay,
       request component need to be initialized before using it. Include these lines before ur code.
    IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
    String mappedPassword = null;
    String mappedUserId = null;
    Also check these threads for ur help.
    Accessing Mapped Username / Password
    How to access user id and password via UserMapping ?
    Reward points for helpful answers.
    Regards,
    Harini S

  • NETWORK MAGIC UNABLE TO SEE OTHER COMPUTERS WITH NM IN THE SAME NETWORK MAP

    I have two computers, one desktop (iMac OS X/Win 7 x64 bootcamp) wired connected and one PC laptop wireless connected in the same network through Linksys WAG320N, both running Network Magic ver. 5.5.9195.0-Pure0 (11.2.9195.1  12/13/2011) with the exactly same firewall settings allowing Pure Networks Platform Service to runs in Private and Public networks. The problem is that the both machines don’t see each other with Network Magic installed and therefore valuable features as screen shots or network speed test are not available. I already uninstalled NM in both equipments and reinstalled it, but the issue persists.
    Anyone facing this same issue or have a clue on how to fix it?
    Thanks,
    Vertigo

    As Barney-15E has suggested, this looks very much like 2 routers, and some systems talking to router A and some systems talking to router B.
    Bonjour protocols will NOT cross a router boundary, so systems on router A will only see other systems on router A, and systems on router B will only see systems on router B.
    The recommented network setup is to make the router connected to the broadband connection be the ONLY router in the home and configure all other routers so they are in "Bridge" mode. That is to say, the other routers are configured so they just extend the primary router's subnet.
    How a home router is put into bridge mode is different depending on the make and model of router.
    In your case, I think the Belkin should be the primary router, and you should put the Time Capsule into "Bridge" mode. Applications -> Utilities -> Airport Utility -> Time Capsule -> Internet -> Connection Sharing: Off (Bridge Mode).
    Once you put the Time Capsule in bridge mode, all your systems should be on the same Belkin subnet, and now Bonjour will see all the Macs in your home.

  • How to present a Webpage composer content to an end user

    Hi Gurus,
        please give me solution to this.
    how to present an article created in WPC to an end user with proper permission settings.
    Thanks & Regards
        Vipin

    Vipin,
    Following would be some key stpes in order to publish article created in WPC to end user.
    1. Create a WebSite
    Navigate to one of the following folders as appropriate
    To create a Web site: /Web Content/Sites
    To create a subordinate Web site: /Web Content/Sites/<MyWebSite>
    You must create all Web sites in the folder structure beneath /Web Content/Sites
    2. Create Web Component
    Navigate to /Sites/WPC Site/Web Page
    3. Web Page will appear under Sites/WPC Site/Web Pages
    4. Adding Web Content (e.g. article) to Web Page
    Right click on WPC Page and choose Edit Page.User will be presented with default layout of Web Page. This can be changed according to requirements.To Add content, place cursor on pencil icon ( ) and choose Add.Navigate to a folder containing shared content (for example, Site Content), or create new Web content to be displayed exclusively on this page.In the Web content browser, click the icon for an item and use Drag &Drop to drag it into container.
    5. Publishing Web Pages
    Go to the /Web Content/Sites/WPC Site/Site Navigation folder
    Choose New --> Navigation Node.
    Publish the site navigation structure.
    Go to the /Web Content/Sites/WPC Site folder.
    From the context menu for the Site Navigation folder, choose Publish Site Navigation.
    In the Web Page Composer, navigate to the Web site that you want to integrate into the portal navigation, and open the Site Navigation folder there.To copy the path of the navigation.wpc file to the clipboard, choose Copy Path from the context menu for the file.
    Choose Content Administration --> Portal Content
    Open a role for editing and create a folder in that role, beneath which you want to display the navigation structure of the Web site. Select the folder beneath which you want to display the navigation structure of the Web site. Choose the Navigation property category. For the property External Connector, enter the prefix wpcnavigation:// and insert the path from the clipboard.
    The Web site is contained in the role immediately once you have saved it.
    ~Cheers,
    Vivek

  • Uccx integrate with cm end user

    when i integrate the uccx server with cm first time,at the end of the step,uccx will import the end user in cm to add the uccx administrator.cm use ladp sync,it can import the user,but i forget the admin user is not in the ldap server,it is in the cm,so i disable the ldap at once,then i try to import the cm loacl user again,but it can not find any of the user in cm.how can i deal with this issue?
    Sent from Cisco Technical Support iPad App

    if your version of UCCX is 7x or lower, you can run CET from Start > Run > cet > Ok, and then reset the application mode to FRESH_INSTALL, then rerun the initialization wizard.
    Search Results for FRESH_INSTALL in Contact Center
    If your version of UCCX is 8x or higher, you need to call TAC.

  • Unable to see Ess Job Definition in the ESS Test UI

    Hi,
    I am defining a new ESS Job. I have created the Jobdefinition.xml in the Jdev. I have defined the parameters in In the Application defined properties. In the system properties, I have added the Sys Effective Application & Sys_product. In the Access Control section, I have added 2 roles, which are already present in the jazn-data.xml file.I select them, give the roles with Read,write,delete & execute permissions.
    I have included the resource bundle, Display Name Resource key & Description Resource Key.
    But now when I save the job, I'm getting an error.
    It is referring to the Jazn file in some other location & not referring to the one which is present in my project. In my project, I have checked out the file and able to make changes.
    So I'm unable to save the job definition.
    Also My main issue is The job I created & deployed in weblogic server is not visible in the ESS Testing UI.(http://localhost:7101/essUi/faces/EssUIShell).
    Any help will be highly appreciated.
    Thanks,

    Hi,
    The issue is not occuring now.
    I could not identify the root cause but it looks like jazn-data.xml file was locked in another view. Though I have issued check out and it also showed check out, it was not actually available for writing.
    I unbranched and destroyed the transactions in my view and re-created the view, the issue did not occur then.
    Also I have created the job definition and now it is listing in the test UI but fails in the parameters page. I followed the steps mentioned in this post.
    http://myforums.oracle.com/jive3/thread.jspa?threadID=1289852&tstart=0
    But ended up in BUILD FAILURE for some reasons.
    A how-to series will be very helpful.
    Thanks,
    Sangheetha.

  • XML IDOC post to R/3 Via WAS - want to see error content with JavaScript

    Hi,
    I am posting XML IDOCs to our R/3 system via a webpage that I have built with JavaScript.  I am posting to the WAS, which is configured to read the XML IDOC with SAP's standard class handler CL_HTTP_IDOC_XML_REQUEST.  We are on basis 620 support pack SAPKB62041.
    In my webpage, I have the JavaScript code set to read the status and statusText so I can see the response from WAS when I post my XML IDOC.  However, I am getting back very generic information when I encounter a 409 error.  THe statusText is always "input_not_found".  So I debugged the class handler code and found that SAP is returning back the more descriptive error info in HTML format.
    I ran a packet sniffer to see what WAS returns and the info looks like this:
    <html><head><title>IDoc-XML-inbound not ok</title><h1>IDoc-XML-inbound not ok</h1></head><body>
    E:Table Lookup Error:300 Cannot map value for field MESCOD in table ZFI_IF_IDOCORG using values
    SNDSAD = |TE|  and RCVLAD = |GL|  and MESTYP = |ACC_DOCUMENT|</body></html>
    I want to know how I can get my webpage to read this HTML info and store that into an alert so I can read this text that I'm returning back to the HTTP post.
    This is how my script looks.  I'm using IE6.
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <html>
    <head>
         <title>Test XML</title>
    <SCRIPT ID=clientEventHandlersJS LANGUAGE=javascript>
    <!--
    function XMLHTTPButton_onclick(DataToSend) {
         var xmlhttp = new ActiveXObject("Microsoft.XMLHTTP");
         xmlhttp.Open("POST","http://some_server:1089/sap/bc/zxml_idoc?sap-client=200&sap-language=EN",false);
         xmlhttp.setRequestHeader("Content-Type", "text/xml");
         xmlhttp.send(DataToSend);
            alert(xmlhttp.Status);
            alert(xmlhttp.statusText);
         alert(xmlhttp.responseXML.xml);
    //-->
    </SCRIPT>
    </head>
    <body>
    <BR>
    This page posts to
    <BR>
    http://some_server:1089/sap/bc/zxml_idoc?sap-client=200&sap-language=EN
    <FORM name=xmlform method=post >
    <P><TEXTAREA style="WIDTH: 623px; HEIGHT: 369px" name=xmlData rows=23 cols=77>
    </TEXTAREA>
    <P>
    <INPUT type="button" value="Submit XMLHTTP" id=XMLHTTPButton name=XMLHTTPButton
    LANGUAGE=javascript onclick="return XMLHTTPButton_onclick(document.xmlform.xmlData.value)">
    </form>
    Previously with this class handler, SAP returned the detailed info back to the "alert(xmlhttp.statusText)" and I had no problem seeing the return info.  But now they have decided to format it in HTML and I don't know how to view this text since it has no ID on it to pull this into an alert box.
    If anyone has any ideas, please let me know.
    Thanks,
    Andrea

    Ok!
    I have solve the problem. So, I was trying to connect via SSO within an user that was not registered in R/3 and I forgot it.
    Sorry for the inconvenience.

  • Unable to see Macintosh HD with Alt Option

    Hi,
    I am novice user in OSX Systems, and i trying to install the OS from the scratch but i don t know why ... i dont see the internal HDD to install
    I tried two diffrent options, after erase the HDD with GUID partition using the Disk Utility Option.
    First i boot the system with cmd + r option and then with  internet access i made the download of necessary files to install, after several hours of download an error appear:
    "Unable to find recovery disk!!"
    Second, i made a bootble disk with usb pen with the same tool (disk utility) i erased the pen with GUID partion, and i did the restore with .dmg image.
    When i boot the system using the usb pen, i noticed the i can't see the internal Macintosh Disk so i select the USB disk to start the installation, after a few moments an error appear !
    "There was a problem installing "Mac OSX".
    I really, really appreciate any help on this, i m trying to figure out why i can't install the OSX system ... why i cannot see the internal Macintosh Disk when i boot the system using USB Pen
    I replaced the internal HHD disk but the behavior is the same ...
    Sorry for english ...
    Please Help ! ! !
    Regards

    With a Option key boot you get the Boot Selection screen that looks like this.
    What shows up are drives/partitions that the Firmware Thinks it can boot from. That Base System entry isn't really OS X or any thing you can Boot from.
    Holding down the Command + r keys at startup will do one of 2 thing. Boot the system from the built in Recovery HD partition or if you are lucky and there is no partition containing the Recovery HD files it might then boot the system from the online internet system. That is IF your model year Mac can access that online system, some can and some can't.
    Also if your system can access that Online system holding down the Command + Option/alt + r keys at startup, and keep them held down until you see a globe on the screen, will take you directly to the Online system.
    Not sure why you are booting from a USB drive? Does that drive have a version of OS X installed on it? Did you make a copy of the Recovery HD files on it using the Lion Recovery disk assistant program.
    Re-reading your intial post I see you made the USB drive with Disk Utility. It has been my experience that using disk utility to clone one drive to another works sometimes and mostly NOT, for me at least. So I use one of those Cloning software programs.
    If you boot to the online system use Disk Utility to Repartition the internal drive As One Partition to Remove all traces of any OS version, and Recovery HD files, that are on it. Then use the Option to Reinstall Mac OS X and if you get a error to the tune of something like, this system isn't in the data base then your Mac did not come with Lion Pre-Installed when it was new. It came with an older version of OS X and you will need the origiinal system reinstall dvd discs.

  • No videos recording and unable to see new pictures with iOS 6

    I recently updated my Iphone 4S with iOS6 and when I try to record a video the app crashes. Is there anything that I may do to resolve this situation?
    On the other hand pictures taken are not visible on the camera roll. I only can see old pictures but no newones.
    Is anyone having the same issues?
    Any clue?

    Followed every one of the many branches to this link. Not a single thing helped. Ultimately completely removed Firefox from my desktop and then reinstalled it (importing my address book from my laptop).
    Makes me a lot less of a fan of Mozilla, if the program is this inherently unstable.
    :-(

  • Unable to view flash content with Flash 10,0,22,87 as an Non Admin

    We currently have an issue with in our Citrix farm with Windows 2003 Servers (x64, R2, SP1) Where Flash Flash 10,0,22,87 is installed and working fine when logged in as a Domain administrator but will not work as a normal (non administrative user) to confirm I've given a user who it did not work for Domain admin rights and it started working straight away. I'm using (and published within Citrix) the 32bit version on IE for compadibility reasons and have also tired this on a Window 2003 Server (x86 R2 SP1) and am getting the same results so I have to assume the issue is with Flash and not with my setup.
    I've tried the following recommendations:
    Remove with Adobe Flash removal tool and Reinstalling via website with an Domain admin login using the change user /install command
    Remove with Adobe Flash removal tool and Reinstalling via install_flash_player_ax.exe installer with a domain admin account using the change user /install command
    Allowing Domain users Modify Premissions (to both the Directories and Files) to the M:\WINDOWS\system32\Macromed\Flash\swflash.ocx & M:\WINDOWS\SysWOW64\Macromed\Flash\Flash10b.ocx
    Following KB article http://kb2.adobe.com/cps/624/624850b5.html and applying the premission changes recommended
    Following KB article http://kb2.adobe.com/cps/191/tn_19148.html and checking the registry premissions on these items
    I've enabled all ActiveX and Java related IE options in Group Policy to allow the to run for the Internet Zone
    When going to http://www.adobe.com/software/flash/about/ either as a Domain admin or a Regular user it confirms that "You have version 10,0,22,87 installed"
    Still I cant seem to get flash components of websites to load when logged in as a non Administrative User.

    this is what fixed the issuefor me:
    Be sure to try this on a test machine and back it up if needed.
    In the system registry
    For each of the following registry keys:
    HKEY_CLASSES_ROOT\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}
    HKEY_CLASSES_ROOT\CLSID\{D27CDB70-AE6D-11cf-96B8-444553540000}
    HKEY_CLASSES_ROOT\CLSID\{1171A62F-05D2-11D1-83FC-00A0C9089C5A}
    HKEY_CLASSES_ROOT\TypeLib\{D27CDB6B-AE6D-11CF-96B8-444553540000}
    Right-click the key, select "Permissions"
    In the Permissions Dialog click the "Advanced" button Click "Add"
    Enter "Everyone" and click "OK" to accept Select "Allow" for the "Query Value", "Enumerate Subkeys", "Notify" and "Read Control" permissions. Do not change any existing permissions.
    Source -  http://www.adobe.com/go/624850b5

  • EA3:  Unable to See the contents in Materialized Views

    I have been using sql developer 1.2.1.
    I exported my connections as an xml and imported it in EA3 Version 1.5.0.53.
    In Version 1.2.1, I am able to see the tables under Materialized Views, but in EA3, If I click on the folder which says "Materialized Views" nothing happens.
    DB
    Database version to which I am connecting -> Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
    SQL Developer
    Oracle SQL Developer 1.5.0.53
    Version 1.5.0.53
    Build MAIN-53.04
    Thanks
    Maha

    variable SCHEMA VARCHAR2
    exec :SCHEMA :='JDESTAGE'
    select name,object_id, '' short_name,
    o.OWNER OBJECT_OWNER
    from sys.all_snapshots s,sys.all_objects o
    where s.owner = o.owner
    and s.name = o.object_name
    and s.owner = :SCHEMA
    and o.object_type = 'MATERIALIZED VIEW' ;
    Result
    anonymous block completed
    NAME OBJECT_ID SHORT_NAME OBJECT_OWNER
    0 rows selected
    -Maha

Maybe you are looking for