Unable to see page icons in panel

I am having trouble viewing my pages within the pages panel. I am using InDesign CS4. When I open the file and click on the pages panel, it isn't expanding fully, and it takes me about 5 or 6 tries to get it to resize. Once I resize it, the page icons are way over to the far right, and every time I open the file, they keep moving over more to the right, until they just disappear off the screen. At this point I deleted my InDesign preferences, and reopened the file, but it just reset it to where the pages panel isn't fully expanded, and when I do expand it, the pages icons are way over to the right again. You can see in the image how the pages icons are way over to the right. They will keep moving more and more to the right until they will just dissappear. I have also tired restarting InDesign and the computer, but got the same results.

As I noted above, I did do that after the page icons had completely disappeared from the panel. After I deleted my preferences (by pressing shft+ctrl+alt when opening InDesign), I opened the file and it was set up as seen above in the screen shot. So the icons came back, but they are still floating to the right.

Similar Messages

When my z2 is locked unable to see notification icons

Hi all
when my z2 is locked I am unable to see notification icons, like missed calls, messages and emails. Please help me

Hi Andy1374, welcome to the community!
If you can't remember your passcode then you can do one of the following:
Run a software repair on the handset (this will delete all user data)
or Log into my Xperia (if you have previously set it up) > Locate the device > Press Lock > Enter code > now a different unlock box should appear on your screen > enter the code.
To run a software repair:
Download PC Companion or Bridge for Mac.
Running the software repair on PC Companion:
1. Install and open PC Companion then select Support Zone.
2. Phone Software Update.
3. Start.
4. Repair Phone
5. Continue
6. Accept data removal
7. Next
8. Wait for prepare
9. Select Phone
10. Follow the connection steps
Running the software repair on Bridge for Mac:
1. Launch Bridge for MAC without the handset connected.
2. On the Main Window select "Xperia > Repair Xperia
Device".
3. Ensure the phone is charged and select "Ok" in the
following window.
4. Select Continue on the following page.
5. Wait until the initialising step is finished the
continue as below.
6 . Select your model of phone from the list that appears
7. Follow the connection steps that appear, ensuring that
you are holding the relevant button down before during and
after the connection phase until the update/repair begins.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Unable to see page-content control filed in subsite level for responsive sharepoint site !!

Hello.
Actually, I am facing unexpected issue with responsive design package for SharePoint 2013 environment. I
am done with lots of try here and there but no luck yet so finally putting my issue here to get the help on this.
I have applied responsive design package from this codeplex solution - http://responsivesharepoint.codeplex.com/
Which is working as expected , however when I add the following snippet in "Banded" Page layout , I am unable to see the Page Content field on pages at subsite
level, however I can see the same field on root site pages of site collection.



<div id="ctl02_label" style="display:none">Page Content</div><div id="ctl02__ControlWrapper_RichHtmlField" style="display:inline" aria-labelledby="ctl02_label"><div align="left"><div nowrap="nowrap"><span nowrap="nowrap">Page Content</span></div><div><div>Page Content field value. Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.</div></div></div></div>


can you please direct me to resolve this issue ? ( I wonder
if anyone has face the same )
Even , I don’t see the page content field in sub site pages for default "Blank Web part Page layout".
I have also noticed that in responsive design webpart page layout is having only
"Page Image" field in first row as shown in following screen:
While in default publishign design , I can see many page content fields as shown
in following screen:
Is this by responsive design ? or Is there any problem in page layout - I am not sure !! :(
Looking really forward for the resolution on this issue.
Thanks and Best regards,
Dipti Chhatrapati

Hello,
Just sharing the root cause of this issue which may help to others facing same.
The reason behind this behavior was actually silly :) which is always the case once we know it !
somehow , page content types was not having "Page-Content" filed rather it was using publishing columns but not page layout columns and hence I was unable to see the page layout columns in my page.
Thanks and Regards,
Dipti Chhatrapati

Unable to see page in design view

Is someone able to tell me what it is about this page that
offends Dreamweaver's design view sensibilities?
I am stuck.
Thank you.
http://inbx.us/designhelp/

Probably one, or more of the 54 errors found here -
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Finbx.us%2Fdesignhelp%2F
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"PaulBroni" <[email protected]> wrote in
message
news:ge4sea$23u$[email protected]..
> Is someone able to tell me what it is about this page
that offends
> Dreamweaver's design view sensibilities?
>
> I am stuck.
>
> Thank you.
>
>
http://inbx.us/designhelp/

I am unable to see icons.

I am unable to see icons(.png) in a website developed in GWT 2.4 Framework, when viewing it in ipad(6.1.3) in safari. I am unable to see any icons whatsoever when I have hosted my application in Jboss 7. But on hosting it on Jetty server, I could see them all. I have tried clearing the cache, cookies etc, and also reoving website data. But I can view the website well when it is hosted in Jetty but not the same while hosting it in Jboss. Can you please help me out?

Hi, after trying for a bit I found the solution. The key is to use ClientBundle for image resource instead of specifying the images directly in your code. It is cleaner. Works perfectly in Jboss now! Still, I feel this should'nt have arised in the first place. When the same code works in chrome, why should safari be any different? Food for thought.

Unable to display blinking icon for JTree

I am unable to see blinking icon for JTree node. If I use any other image which is not blinking, then I am able to see icon.
If blinking image is used, it shows blank image.
Please refer to following code.
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Component;
import java.net.URL;
import javax.swing.ImageIcon;
import javax.swing.JApplet;
import javax.swing.JScrollPane;
import javax.swing.JTree;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.tree.DefaultTreeCellRenderer;
public class TreeApplet extends JApplet {
JTree tree;
DefaultMutableTreeNode root;
DefaultMutableTreeNode node1;
DefaultMutableTreeNode node2;
DefaultMutableTreeNode node3;
DefaultMutableTreeNode node4;
private ImageIcon errorIcon = null;
private URL resource = null;
private static final long serialVersionUID = 1L;
public void init() {
     errorIcon = loadIcon("images/errorBlink.gif");
     root = new DefaultMutableTreeNode(new ProcessInfo("root", "error"));
     node1 = new DefaultMutableTreeNode(new ProcessInfo("Node1", "info"));
     node2 = new DefaultMutableTreeNode(new ProcessInfo("Node2", "warn"));
     node3 = new DefaultMutableTreeNode(new ProcessInfo("Node3", "debug"));
     node4 = new DefaultMutableTreeNode(new ProcessInfo("Node4", "error"));
     node1.add(node2);
     node3.add(node4);
     root.add(node1);
     root.add(node3);
     setLayout(new BorderLayout());
     tree = new JTree(root);
     tree.setCellRenderer(new TreeRenderer());
     add(new JScrollPane((JTree) tree), "Center");
private class TreeRenderer extends DefaultTreeCellRenderer {
     private static final long serialVersionUID = 1L;
     public TreeRenderer() {
          this.setBackgroundSelectionColor(Color.lightGray);
          this.setBorderSelectionColor(Color.BLACK);
     public Component getTreeCellRendererComponent(JTree tree, Object value, boolean sel, boolean expanded, boolean leaf,
          int row, boolean hasFocus) {
          super.getTreeCellRendererComponent(tree, value, sel, expanded, leaf, row, hasFocus);
          setIcon(getStatus(value));
          return this;
     private ImageIcon getStatus(Object value) {
          DefaultMutableTreeNode node = (DefaultMutableTreeNode) value;
          ProcessInfo nodeInfo = (ProcessInfo) node.getUserObject();
          String status = nodeInfo.getStatus();
          if ( status != null ) {
          if ( status.equalsIgnoreCase("error") ) {
               return errorIcon;
          return null;
private ImageIcon loadIcon(String name) {
     ImageIcon icon = null;
     resource = this.getClass().getResource(name);
     if ( resource != null ) {
          icon = new ImageIcon(resource);
     return icon;
}

1. Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
2. A renderer is just a "rubber stamp" used to paint on the table/tree/list/whatever. You can't display animation in an ImageIcon by setting it to a renderer. Since the JLabel subclass used as the renderer isn't a part of any visible component hierarchy, the icon won't be refreshed with new frames.
db

Unable to see the personalization link on any page

Hi,
I am unable to see the personalization link on any of my pages (not even on login page).
I am setting the profile option value to "Yes" for the profile option
FND: Personalization Region Link Enabled
Also I have bounced the Apache.
Please help me as I am stuck due to this.
Thanks,
Anoop

Did you enabled the profile option Personalize Self-Service Defn (FND_CUSTOM_OA_DEFINTION) .It must be set to Yes.
Abhay

I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room an

I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room and am able to access the internet on my laptop, Ive also been able to through the Bose Soundlink air wifi set application connect the bose speaker to the Wifi too.
I am only able to play my itunes through my macbook speakers and cannot find the airplay button which should be next to the volume slide once turned down to less than 1/3 of the volume..

Thanks for your help. Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV. I guess I'm just stuck with using iPhoto on my MB Air. Thanks again.
paul

Unable to see the pageviewer in a page from pages library in a custom page layout

<File Url="Inbox.aspx" Type="GhostableInLibrary" Level="Published" Path="myPages\Pages\Inbox.aspx" >
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="Header" ID="inboxwp1">
<![CDATA[<WebPart xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/WebPart/v2">
<Title>Inbox</Title>
<FrameType>Default</FrameType>
<Description>Displays another Web page on this Web page. The other Web page is presented in an IFrame.</Description>
<IsIncluded>true</IsIncluded>
<ZoneID>wpz</ZoneID>
<PartOrder>0</PartOrder>
<FrameState>Normal</FrameState>
<Height></Height>
<Width />
<AllowRemove>true</AllowRemove>
<AllowZoneChange>true</AllowZoneChange>
<AllowMinimize>true</AllowMinimize>
<AllowConnect>true</AllowConnect>
<AllowEdit>true</AllowEdit>
<AllowHide>true</AllowHide>
<IsVisible>true</IsVisible>
<DetailLink />
<HelpLink />
<HelpMode>Modeless</HelpMode>
<Dir>Default</Dir>
<PartImageSmall />
<MissingAssembly>Cannot import this Web Part.</MissingAssembly>
<PartImageLarge>/_layouts/15/images/mscntvwl.gif</PartImageLarge>
<IsIncludedFilter />
<Assembly>Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly>
<TypeName>Microsoft.SharePoint.WebPartPages.PageViewerWebPart</TypeName>
<ContentLink xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">/_layouts/15/AppPages/InboxRedirectPage.aspx</ContentLink>
<SourceType xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">URL</SourceType>
</WebPart>]]>
</AllUsersWebPart>
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="LeftWP" ID="wpLeft">
<![CDATA[
<webParts>
<webPart xmlns="http://schemas.microsoft.com/WebPart/v3">
<metaData>
<type name="myWebParts.ProjectLinks.ProjectLinks, m, Version=1.0.0.0, Culture=neutral, PublicKeyToken=52f3214933d771f7" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">myprojectLinks</property>
<property name="Description" type="string">My Visual Web Part</property>
</properties>
</data>
</webPart>
</webParts>
]]>
</AllUsersWebPart>
<Property Name="ContentTypeId" Value="0x010100C568DB52D9D0A14D9B2FDCC96666E9F2007948130EC3DB064584E219954237AF390076F7B5D03DD146D699D042E1C5D76EF7" />
<Property Name="FileLeafRef" Value="Inbox.aspx" />
<Property Name="Title" Value="Inbox" />
<Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/myPageLayout/myPage.aspx, my custom Page Template"/>
<Property Name="ContentType" Value="myPageCT" />
<Property Name="_ModerationStatus" Value="3" />
<Property Name="FileDirRef" Value="Pages" />
<Property Name="FSObjType" Value="0" />
</File>
I have created a custom page layout in my site collec. using VS 2012 and deployed am able to see the page in the pages lib [inbox.aspx].
Here, I have added a page viewer web part and I want to redirect to another application page, which is already coded [inboxredirect.aspx] in my solution[its another dll - another SP solution which has appln pages and web parts
etc - ]
The issue is that, i am unable to see the page viewer web part when the page is displayed. inbox.aspx is a page which is created once my custompagelayouts solution is deployed and when i navigate to this page, i am stuck . i am getting
the " access denied " message is displayed.
can anyone help why this error is displayed?
in my inboxredirect.aspx page i am inherting from unsecuredlayoutspagebase class, so i dont think , access denied message should come.
using System;
using System.Configuration;
using Microsoft.SharePoint;
using Microsoft.SharePoint.WebControls;
namespace myproj.Layouts.AppPages
public partial class InboxRedirectPage : UnsecuredLayoutsPageBase
string projectName = string.Empty;
protected void Page_Load(object sender, EventArgs e)
string siteUrl = SPContext.Current.Web.Url;
using (SPSite site = new SPSite(siteUrl))
using (SPWeb web = site.OpenWeb())
string urlProjectName =Request.UrlReferrer.ToString();
projectName = urlProjectName.Split('/')[5];
//end
SPUser user = web.CurrentUser;
if (user != null)
above is my appln page to which i am redirecting.

Solved it myself guys... (Well the major part)
Got help from here...
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/blank-open-save-dialog-when-browsing-document-library-from-office-clients.aspx
and
http://www.sharepointconfig.com/2011/02/vs2010-list-definition-template-missing-file-dialog-view/
with some tweaks of my own..
Still working on it because its showing SharePoint 2010 header... And I need 2013 look...

Unable to see JSF pages in Design View after upgrade to Netbean 6.1

Hi:
I have a Sun Java Studio Creator Update 2 Project and I upgraded to Netbean 6.1 according to Sun's migration guide. It compiles and runs OK, but i can not see any page in design view at all.
Any one has any idea?
thanks

Hi Sriram,
I want to see commit stats on SM50 while background job runs. I unable to see on after upgrade.
all db stats are updated. On Sm50 screen unable to see Database commit count.
Cheers,
Harish

I do not have the pages icon on the bottom right of Safari ios 7. When I press the plus sign at the top right I see 'private' on the bottom left side but there are no buttons on the bottom right at all. I am trying to get Safari to have the tab Rolodex

I am super frustrated with Safari in ios 7. I do not have the pages icon on the bottom right of Safari ios 7. When I press the plus sign at the top right I see 'private' on the bottom left side but there are no buttons on the bottom right at all. I am trying to get Safari to have the tab Rolodex look of the tabbed windows. So I can see the pages. Hope this is making sense. Why am I not seeing the pages button on the bottom right of Safari?
Thanks!

Bummer! Hopefully this will change in the future. At least I know now that I am not crazy for not seeing the pages icon! Thanks so much :)

Unable to see ServerSettings link SLD home page

Hi All,
I'm unable to see Unable to see ServerSettings link SLD home page.
I want to seversettings in SLD.
This is the link i used: http://sapsp7:50100/sld/admin/index.jsp
Please help me out.
~Sridhar

Check this thread
https://forums.sdn.sap.com/click.jspa?searchID=390707&messageID=584723
Regards, ANilkumar

When I open the Page Thumbnails panel, all the document's thumbnails are blank. How do I restore the ability to see page material in Page Thumbnails?

When I open the Page Thumbnails panel, all the document's thumbnails are blank. How do I restore the ability to see page material in Page Thumbnails?

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

HT4061 recently downloaded Ios7 to iphone4. am unable to get app icons on to home page. can only open by using spotlight. any help would be appreciated

recently ugraded iphone4 to Ios7. am unable to get app icons on home screen. can only access by using spotlight. any help appreciated

Hi, are you saying that your homepage is completely devoid of Apps, even the dock at the bottom of the screen?
Regards,
Steve

Where is the Pages Icon?

I am trying to move pages around in a pdf using Acrobat Pro 8.1.5, and between multiple pdfs. I do not have a pages icon in my navigation panel, nor do I have thumbnails of the pages in the navigation panel. When I go to View > Navigation > Pages, I get the pages window, but I cannot move pages in between pdfs. I know I've done this before and it is a feature when the thumbnails appear in the Navigation Panel, but does not appear to be possible in the Pages view. Help!!

You've verified the app is on your phone, by doing a spotlight search, correct? You've looked on every page & in every folder, correct? If so: Settings>General>Reset>Reset Home Screen Layout...see if you see it now.
Remember, with iOS 7.0, you can put as many apps as you want in a folder, but only 9 will be visible.

Unable to see page icons in panel

Similar Messages

Maybe you are looking for