Unable to send file to FTP server
Hi All,
I am using a File to File scenario. In that i am using FTP. The file is not reaching the target side. It is displaying the following error. I have checked the Target directory, it is correct.I am able to send manually FTP File to the same target directory.
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: An error occurred while connecting to the FTP server 'acmxrtdb:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 C:\BankFiles\FromSAP\Wells: The filename, directory name, or volume label syntax is incorrect. '. For details, contact your FTP server vendor..
Please help me in solving this. It would be very helpful to me.
Thanks & Regards,,
Raju.D
Hi,
the path specified is not correct.
The value "0 C:\BankFiles\FromSAP\Wells" is not valid if the protocol is FTP. This is the physical directory on the operating system.
If you're using an FTP server you need to know the path to the file on the FTP.
To do this I suggest to connect to the FTP using Internet Explorer and navigating the FTP folders until reaching the right one.
Then on the url bar you should got something like this: "ftp://server:21/path/to/file/". Use "/path/to/file" as value for the file adapter configuration.
Hope this help
Francesco
Similar Messages
-
I have to turn off Firewall to send files to ftp server
My ISP changed to a different server, since when I have had to turn off the firewall on my Mac 10.4.8 if I want to connect to it to upload or download files.
If the Firewall is on, Transmit (my ftp program) seems to be able to log in, but the list of files doesn't appear. The staus reads as 'status: retrieving list of files'. When I turn off the Firewall, the list of files appears.
Have 'passive mode' on or off makes no difference.
Any thoughts gratefully received.
Kind regards
RichardHave you asked your ISP what changes you might be required to make?
They changed something required to login. Why is this a "mac" issue?
When you have Firewall turned on, and try an upload...you can examine the logs to see what kind of things are logged during this apparent FTP failure.
OK, Have you tried another FTP client? (CyberDuck, Fetch, etc)
Have you tried using Terminal to do a manual FTP (and do away with the silly GUI's?)
Enable firewall
open Terminal.
type ftp<enter>
type open [name/IP of your server location]<enter>
you'll be asked for authientication...login...
type ls<enter> {that's an ell, and an ess}
Any results? (type quit<enter> to end your FTP session -
Connection refused Error while writing file to FTP server.
Hi All,
We got below error while writing file to FTP server. Any one have any idea on this?
sABCS_1.0_8e88588d4fb54ebd2ac7ef66c8421d52.tmp/writeEncryptedFile.wsdl [ Put_ptt::Put(opaque) ] - Could not invoke operation 'Put' against the 'FTP Adapter' due to:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server. [Caused by: Connection refused]
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.Hmmm ...
Same issue as your post from three months' earlier?
Re: Error while putting file in sftp location. -
Not able to send file Using FTP in SSIS 2005
I am using SSIS 2005
I am trying to send file to ftp server using FTP task in SSIS but i am getting following error.
Error Message-:An error occurred in the requested FTP operation.
Detailed Description-:550 /FileName.txt: Access is denied.
RemotefilePath is /
I need a advice.
Thanks in advance.I got this error recently from the FTP task in SSIS:
Unable to send files using "FTP".
I had everything correct, by the book. I was trying to send a file, but I got the same error when trying to receive a file.
I already verified that I could send the file via command line FTP, so the FTP was not "secure FTP" (which wouldda required FileZilla or WinSCP or something similar) and my credentials were fine.
But I still got the above error. Heck, I was beginning to thing that the FTP task in SQL Server 2008 was broken and just couldn't send files.
Well, this issue is now resolved. The problem was in the
destination folder. I was assuming that the root folder for my FTP account held the files.
So I entered the destination folder as this:
/data_in/
But... the FTP task sees the root folder as one up from that.
So I had to use my account name in the path... meaning I had to change the destination folder to this:
/myaccountname/data_in/
(where "myaccountname" was my login to the FTP site.)
I hope this post helps someone else.
Donna -
Unable to send file in binary mode to ftp server using AIR application
Hi, Can any one help me. i am trying to send local files to ftp server in binary mode from AIR application using sockets.
I cant use PASV mode for this FTP server because security restrictions. when i am trying to send Binary command i am always getting
error code 500 which is unrecognized command. I googled for solutions but i cant find any one using Binary mode to send data every example is using PASV mode to send
file.
code example:
private function upload():void{
sendCommand("binary ");
private function sendCommand(arg:String):void {
arg +="\n";
s.writeUTFBytes(arg);
s.flush();
in response i am getting unrecognized command.I'm successfully using an ftp example from http://http://projects.maliboo.pl/FlexFTP/
that I converted to spark and uses a popup progress window.
If you don't need to use sockets I can post a sample project.
I believe I still connect with PASV, but have no problems sending Binary files.
I don't think they're commands that are dependent on each other -
No Data in PDF file in FTP server
Hi All,
I am trying to place a PDF file in FTP server.
Used
CONVERT_OTFSPOOLJOB_2_PDF to convert spool to PDF
SCMS_TEXT_TO_XSTRING
FTP_R3_TO_SERVER to transfer data to FTP.
I am able to see PDF file in FTP and no of pages matches with that of R/3 but there is no data in PDF file.To get pdf file , you need to set the itcpo-tdgetotf = 'X' and need to pass in the exporting parameter (options in open_form function module ).Then in close_form function module take all the data of otfdata table into an internal table . Then use SX_OBJECT_CONVERT_OTF_PDF function module to convert it to pdf.
I will show with an example.
tables itcpo.
DATA: ch_otf TYPE STANDARD TABLE OF itcoo.
DATA: w_otf TYPE itcoo.
DATA: w_pdf TYPE solisti1. "For PDF
DATA: i_content_txt TYPE soli_tab.
DATA: temp1 TYPE sx_format VALUE 'OTF',
temp2 TYPE sx_format VALUE 'PDF'.
DATA: c_printer TYPE sx_devtype VALUE 'PRINTER'.
DATA: w_transfer_bin TYPE sx_boolean. "Content
DATA: i_content_bin TYPE solix_tab, "Content
wa_content_bin TYPE solix,
i_objhead TYPE soli_tab.
itcpo-tdnoprint = 'X'.
itcpo-tdpreview = 'X'.
itcpo-tdgetotf = 'X'.
These three parameters need to be passed along with other required parameters
CALL FUNCTION 'OPEN_FORM'
EXPORTING form = xformular
language = ekko-spras
OPTIONS = itcpo
archive_index = toa_dara
archive_params = arc_params
device = xdevice
dialog = xdialog
mail_sender = sender
mail_recipient = recipient
EXCEPTIONS canceled = 01.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = RESULT
tables
otfdata = ch_otf.
LOOP AT ch_otf INTO w_otf.
CONCATENATE w_otf-tdprintcom w_otf-tdprintpar
INTO w_pdf.
APPEND w_pdf TO i_content_txt.
ENDLOOP.
converting otf file to pdf file
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
format_src = temp1 "'OTF'
format_dst = temp2 "'PDF'
devtype = c_printer
CHANGING
transfer_bin = w_transfer_bin
content_txt = i_content_txt
content_bin = i_content_bin
objhead = i_objhead
len = v_len_in
EXCEPTIONS
err_conv_failed = 1
OTHERS = 2.
Then open dataset and transfer to ftp of the content of table content_bin(i_content_bin) as shown in above example.
I think this will be helpful for you -
Files from FTP server to Application server
Hi All,
I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface. Actually the process is already established at clientsite for placing master data files like product, plant etc from FTP server to App server through FTP adapter. Now my requirement is to move transaction data file with completely different structure as master data to App server. If we place these trasaction data file in same folder/directory as master data files does SAP XI pick this file also. If not what are the steps I need to follow to achieve this. I know that if we create new configuration it will work but I question is does master data interface picks this transaction data file also.
Right now our process for master data files is SAP XI picks the files and deletes the file from FTP server folder. The master data file names are plant_attr.csv, product_attr.csv etc and transcation data file name is salestrasactiondata.csv. I need to move these files to application server on daily bases.
I appreciate your help .
Regards
Bob.> I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface.
Hello Bob,
Yes it is possible.
There can be two ways of doing it.
1. N:1 mapping, BPM will require for this.
N:1 Mapping refer this blog
IDOCs (Multiple Types) Collection in BPM
BpmPatterns CollectMerge
part1 BPM with Patterns explained Part-1
part2 BPM with Patterns explained Part-2
Second option
Create 3 scanarios in integration directory and correspondingly in integration repositoy create different data types, message types, mappings & interface mappings and then in each of scenario us different message interface and interface mapping.
> I know that if we create new configuration it will work but I question is does master data interface picks this transaction data file also.
>
If you are using N:1 scenario then use *.csv in your sender adapter under file name parameter and then all the files will be picked up from same directory.
If you are using second option (3 different scenarios) then also you can pick the different files from same directory. You will be having 3 sender adapters in this case, So, one for picking master data, and another for product data and the last one for transaction data.
So, in case of master data use "plant_*.csv" as a file name and directory name.
In case of product data, use "product_*.csv " as a file name and source directory will remain same.
similarly do it for transaction data.
So by this way all 3 sender adapters will perform their job to pick the different files from same source directory.
Regards,
Sarvesh -
Windows 8.1 Pro - FTP.exe not able to put file to FTP Server
Hi
We have replaced our Windows XP environment to Windows 8.1 Pro. Now I have problem with sending files through FTP to very old devices. Devices are runninng FTP Servers. Each time I try to "PUT" file on Windows 8.1 I receive message after some time:
"Connection closed by remote host"
If I make the same on Windows XP file is stored on FTP successfully.
From Windows 8.1 I am able to upload software only via Filezilla, but I need command line solution like FTP.exe or ncFTP.exe (non of them are able to stor file)
I have observed in Wireshark, that ftp.exe sends about 80kB of data, waits for some time and then it stops.
Summary of my problem:
Source Appl
Destination
Status
Win XP ftp.exe
FTP Server upload ok
Win 8.1 ftp.exe
FTP Server upload failed
Win 8.1 ncFTP.exe
FTP Server upload failed
Win 8.1 filezilla
FTP Server upload ok (but no command line solution)
Win 8.1 environment:
- standard installation of Windows 8.1 with newest Microsoft patches
- firewall ports - opened for inbound and outbound traffic
- no antivirus
FTP Server on problematic devices:
- old FTP Server, transfer in passive mode
I need command line solution tu upload files. Now I am not able to upload 1500 devices as we don't have Windows XP anymore.
What I have observed, when I type "PUT file" it takes about 20-30 seconds to start transfer on Windows XP or through filezilla.
Is there any problem with timeout in Windows 8.1 when it transfer files to old FTP server (working in passive mode)?
Thanks and regards,
MarcinHi Marcin,
Here is a thread talking about Windows 8.1 and FTP, see:
Windows 8.1 and FTP problems
https://social.technet.microsoft.com/Forums/windows/en-US/db3793a6-2810-464c-af9a-522b05f51ba9/windows-81-and-ftp-problems?forum=w8itprogeneral
Further, I am currently checking on the issue, if more things found out, I will update here.
Thank you for your understanding.
Best regards
Michael Shao
TechNet Community Support -
Urzent: Delete files in FTP server using FTP receiver adapter
Hi Experts,
We are doing 2 asyncronous scenarios. frst scenario should delete existing file and place the request file. Second scenario should pick(delete) response file and delete request file it placed also.
Scenario 1 : File(NFS) to FTP (Asynchronous)
Scenario 2: FTP to NFS (Asynchronous)
Scenario 1: (Receiver FTP Adapter )
step-1: PI has to delete all existing files in FTP server
step-2: PI has to place Request file in FTP
Scenario-2: ( Sender FTP Adapter)
step-1: PI has to Delete request file i FTP server
Step-2: PI has to pick and delete response file in FTP server
Doubts:
How can we do above steps in PI
Thanks,
MuraliHi Krish - For scenario -1 You have to make use of the OS commands to delete the files on FTP server before placing the request file.
-> write some script which wil connect to the FTP server and delete the files.
-> call that script from the file adapter "using execute OS commands" option
For scenario -2 :
pick both the files(request and response) and set the processing mode to delete..
during the receiver determination, process only request files(based on filename/content) -
Receiver-File-Adatper creates empty files on FTP-Server
Hi experts,
I have a problem with my IDOC-to-File-scenario. My Mapping converts IDOCs to XML-files. Then the xml-files should be send to a ftp-server in New York. but only the filename is created on the ftp-server in New York. but without any content.
At first I tested the scenario with a ftp-server in our company. and it works. the files and the right content were created. so the scenario and the mapping are working correctly.
Have you any idea what the problem is?
Thanks and best regrads
ChristopherDont use anonymous login. Please provide user name and password.
Also go to adapter engine queue. There see the details description of your message. There it will specify which file got created, on which FTP server, in which folder and also how many bytes XI has transferred. If possible let me know these details.
Also try uploading any other file to FTP.
For this got to Command prompt.
1. open (o) IP ADDRESS
2. User name
3. Password
4. go to specified folder
5. Use PUT command to save the file on FTP server.
If after all these empty files is getting created then contact your system administrator and tell him to check firewall settings. Because there are few parameters which allows data transfer.
Because if firewall problem is there then u wont be able to put a file manually on that FTP server.
Let me know the output.
Warm Regards,
Gouri -
EA6500 - unable to setup Folder Access / FTP Server / Media Server functions
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.
Also, the Cisco light on the router keeps blinking. I'm googling to find out how to troubleshoot these situations but I'm having no luck.
I appreciate any help with these situations.DoublePromo wrote:
I contacted customer service, and they helped me troubleshoot. The description of the router and it's capabilites appears misleading to me - "Folder Access" - I thought it gave one the capability to file share between different computers that are on the same network. It's only for files that are on a USB stick that's connected to the router. Oh well. Good thing I still have Network Magic Pro.
In addition to this, storage functionality on the router doesn't need any software for it to work. The router should be able to detect the external drive when connected and get it configured on the router's interface unlike network magic which you've mentioned where the program must be installed to all computers in the network for it to be able to see all devices present in the network and share files and folders through it. -
Using wildcards (*) in sender file adapter - FTP type
Hi guys!
Dooes it work using wildcards in sender file adapter (FTP type(!) (filesystem obviously work))? I tried it and it failed. it works only for exact name..
I read some articles about FTP and the result is, that ftp work always only with 1 file, so I'm wondering, if this is possible.
Thanks for info!
OlianThanks for all replies..
I know of course, that * can be used, I use it in many scenarios too. But on a FileSystem. It is not working if the sender type is FTP.
*, ., *.dat, ... nothing like that works.. Just exact file name.
I am able to pick up file, if I specify it's exact name, so there should be no problem with permissions..
Please, I'd appreciate one reply with comfirmation: yes, we are using asterisk (*) , we access source files via FTP and they are processed.
Is there anybody with this experience, that it works?
Thank you!
Olian -
Problem while reading the file from FTP server
Hi Friends,
I have a problem while fetching files from FTP server.
I used FTP_Connect, FTP_COMMAND function modules. I can able to put the files into FTP server.
but I cant able to pick the files from FTP server.
anyone have faced similar issues kindly let me know.
Thanks
GowrishankarHi,
try this way..
for reading the file using FTP you need to use different unix command ..
Prabhuda -
How to read .xls file from FTP server t oInternal table
Hi
am using the FTP_SERVER_TO_R3 to read xls file from FTP server to internal table
but the data i get in LT_TEXT is special characters.
CALL FUNCTION 'FTP_SERVER_TO_R3'
EXPORTING
handle = hdl
fname = f_name "ProdDataFromCRM.xls.
* CHARACTER_MODE = 'X'
* IMPORTING
* BLOB_LENGTH =
TABLES
BLOB = lt_text
* TEXT = lt_text
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4
can any one help me out to get the exact data..
Really appreciate your quick response..
Thank YouHi, if you really retrieve an excel file, you can not see the data in ABAP. You may see them in Excel. For this you may use
CALL METHOD document->open_document_from_table
of the interface i_oi_document_proxy for OLE objects. You can access the data with reference to the interface i_oi_spreadsheet.
Please check [Desktop Office Integration (BC-CI)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf] for details.
But, who knows, perhaps you want "And Now For Something Completely Different".
Regards
Clemens -
Need to copy .txt file from FTP server and downloaded on local server directory.
I need to figure out a way to copy .txt file from ftp server in local server directory using sql jobs.
Below links will help achieving it:
https://www.virtualobjectives.com.au/sqlserver/ftp_scripts.htm
http://www.mssqltips.com/sqlservertip/2884/sql-server-integration-services-ssis-ftp-task-for-data-exchange/
Maybe you are looking for
-
Clearing document not generated on cancelling billing document
When we cancel a billing document through VF11 the cancelled billing document generates a reverse document. The billing document and the cancelled billing document are not getting cleared i.e they show as an open item in the customer account.
-
I have updated to Firefox 33.0.3 and now I am getting untrusted connection errors when trying to go to Yahoo.com and Amazon.com this happens with both http and https. My time is in sync. I tried deleting the cert8.db file. I have looked at other solu
-
PS Project not appearing in cProjects Accouting tab
I am able to create the PS Project from cProjects through status management (Flag for transfer) after the required accounting intergation and other configurations. However, I have a concern when I am linking an existing PS project to a newly created
-
Accented characters take unknown shapes on web pages
I can't read French accented characters on many web pages I use. Please help me solve this problem.
-
I upgraded my Ipad mini as recomended to 7.0.3. The sound is terribly distorted in all video playback and music. Thanks for helping