Unable to Send Mail - Part Deux

I posted a question yesterday on my inability to send mail to some email addresses. As I mentioned yesterday, I had placed an Ad in Craigslist, and have received several responses. I am unable to respond to those emails through Mail. When I try, it "freezes", and I have to do a Force Quit to get out of Mail.
Yesterday I had only one response to the Ad, and it was thought that it was because the senders ISP was having problems, but I received two other responses from different ISP's, and the email "freezes" like before.
I contacted my ISP, and he suggested that I try to reply to those emails directly through my ISP's website. I tried that, and the emails were sent out OK. We went over my settings in my account and everything was good there.
I did a "Rebuild" in Mail, and that didn't make any difference.
Does anyone have any suggestions?
Thanks,
Jim

I had a similar situation with mail being sent to Verizon addresses through Comcast. Verizon users were not getting my emails so Comcast reset or tweaked the settings and now all is fine. Funny, Comcast said it was a Verizon problem and visa versa. Try your ISP first.

Similar Messages

Unable to send Mail from POP account

I have an Iphone 4 and have upgraded the IOS from 5-1 to 6.1.3. Since then I have been receiving all my mails but i have been unable to send mails from my POP account. the notification "Cannot Send Mail. A copy has been placed in your Outbox. The receipient, "xxyyzz @ gmail . com " was rejected by the server" displayed. Please Help. the same thing happens when I configure my POP account on my Son's Iphone4, and there is no problem in receiving and sending mails from my Outlook. Please Help!!!!!
Can i revert back to IOS5.1.1?????

Contact your email provider and get the correct settings to use for the outgoing mail server (SMTP) on a mobile device. If it's email provided by your ISP, they have likely blocked email from outside their network from relaying to prevent spam.

Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1

Hi All,
We've been setting up a new SBS 2011 server for a client this week. Everything is working, except the staff have 4 x iPhones to connect with Exchange ActiveSync.
There are 2 x iPhone 4's and 2 x iPhone 3Gs's. We can setup the Exchange accounts on each of the phones and they are all able to sync mail and calender etc with the server.
The problem we have is when any of them try to send mail from the phone, it gives an error : "Cannot Send Mail - An error occurred while delivering this message" and it sits in the outbox on the phone.
The newsgroups and forums are littered with people having issues with IOS4 and Exchange 2010 but most of these are from June-August 2010 when IOS4 version was around 4.00 or 4.01
A lot of these people had iPhone 3 handsets running with IOS 3.1.3 which worked with Exchange 2010 but when they upgraded to IOS 4, they had this problem sending mail.
It seems that for most of them, the fix came in the form of IOS version 4.1 which fixed the send issue for them.
We have a variety of Hansets and IOS versions (including an iPhone 3Gs running IOS 3.1.3) but are unable to send mail from any of them:
iPhone 3Gs    IOS 3.1.3
iPhone 3Gs    IOS 4.3.3
iPhone 4       IOS 4.3.3
iPhone 4       IOS 4.3.5
I was surprised that the iPhone 3Gs running 3.1.3 was unable to send either as nearly all the forums etc I read with this issue said the iPhone 3's worked with that IOS version.
Today we used a test iPhone 4 handset from our office to connect to an almost identical Small Business Server 2011 we setup two weeks ago for another client.
The test iPhone 4 was able to connect, Sync and Send email on that server but when set it to connect to this SBS 2011 server, it gets the "Cannot Send Mail" message the same as the others. So clearly the handset is working (on the other server at least),
it must be something misconfigured in this Exchange server right?
We ran the Exchange Remote Connectivity Analyser on the Exchange server and got green ticks across the board.
Outlook Web App and Outlook Anywhere both work normally. Everything we can test on the Exchange server works except sending from any iPhone.
Having said all that, I just setup a Windows Mobile 6.1 handset to sync with the Exchange 2010 server as a test, and it appears to have the same issue.
It will connect & Sync Mail, Contacts and Calendar but if trying to send an email from the phone, it will just sit in the outbox.
Does anyone have some insight into what the problem may be?

Further to this .. I found the solution on a MS Exchange 2010 support forum.
It was not a certificate or firewall issue, looks as thought the “Accepted Domains” in Exchange Mgmt Console –
Org Config – Hub Transport cannot have any spaces in the name field.
I had some spaces and the emails were not downloading fully and able to send. Once I removed the spaces from the Name field and
restarting the Exchange and IIS services emails were now being sent and received ok.
Check
out :
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmobility/thread/321eae51-9cbd-4a5e-85c1-68d8f7b523c3
This
is good one to add to your knowledge bank in case you come across it in the future.
Rgds Gerry

Unable to send mail- mail remains in outbox and I receive error message

Ok, I have used Mail for years. All of a sudden I am unable to send mail. The mail goes to the outbox and then I receive the following error message.
This message could not be delivered and will remain in your Outbox until it can be delivered.
The server "smtp.mac.com" refused to allow a connection on port 25.
I can connect to webmail of course and send mail that way.
I receive mail perfectly.
Not sure what to do...??
Thank you for any help with this.

Read the following article, which applies to all versions of Mac OS X (not just Mac OS X 10.4.2 and earlier as the article states) and can be useful for other mail accounts as well (not just .Mac):
.Mac: Server timeout alert message when sending email

Adobe acrobat error - unable to send mail

I`m using Win 7 pro 64bit with acrobat 9.0 pro 32 bit.
I am now unable to send .PDF`s from either the toolbar or from the File, attach mail.
The system says Ädobe acrobat error - unable to send mail"
Any hep would be appreciated.
Many thanks

I don't remember much of Acrobat 9...
What email client are you using? Are the Acrobat preferences configured to use that email client? Is it running when you try to send that document?
[topic moved to Acrobat forum]

Unable to send mails to outlook from sap system through workflow

Hi ,
Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
Please find the errors belows that traced from sost t code
02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
Regards
RAGHAVENADAR

Hello,
Actually i checked the mail ID for WF-BATCH using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
ABAPer is sending mails through work flow.
Regards
RAGHAVENDAR M

"Unable to send mail" using Verizon email account

No matter what I try, my Incredible will not send an email using my Verizon email account. I receive emails but cannot send. I've verified the account settings numerous times and the verifications always work. But I still get the "Unable to send mail" message. Initially I thought it was the port but I've tried both 25 and 587. Neither work. I know I've sent messages before but it's been a while. Anyone have any ideas?

I tried SSL with 25 and 587 (Verizon recommendation). Still no go.
BTW, there isn't any way to save the Mail size limit and Download options is there. Every time I go thru this I have to go back and set these up again.
Thanks again for your help.

Unable to send mails from Azure SharePoint 2010 VM

Hello All,
I have created Site-to-Site VPN in azure to my on premise, and i have configured SharePoint 2010 environment in that. Then i have configured outgoing mail settings for a web application in that VM, but i am unable to send mails to external domain from it.
But i am able to send mails from my on premise VMs to external domains.
Thanks

Hey There,
Azure does not support smtp relay, you may want to use SendGrid (which working with Microsoft Azure).
After registration you get 400 E-mail per day free of charge.
From technical aspects youll get SMTP server, Username & Password which you can fill in your application.
Hope it helps.
Ido

[nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authentic

Hi,
We have configured SMTP server details in OBIEE 11g OEM to send mail from Agent. When we run Agents, we are getting the error
[nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authenticated
Did anyone face the issue? In that Case, Please give some inputs on that.

Hi Satya,
I would like to few more which I have done today.
I wanted to test telnet SMTP on the OBIEE Installed Machine and I was able to succeed also. Please find below what I did
C:\>telnet mail.smtp.com 25
220 internal.mail.smtp.com Microsoft ESMTP MAIL Service Readt at Fri,
25 May 2012 00:51:00 -0400
ehlo
250-internal.mail.smtp.com Hello [162.44.76.47]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-X-ANONYMOUSTLS
250-AUTH NTLM LOGIN
250-X-EXPS GSSAPI NILM
250-8BITMIME
250-BINARYMIME
250-CHUNKING
250-XEXCH50
250 XRDST
AUTH LOGIN
334 VXN1cm5hbWU6
Uy5SY-------------- Mail User Name
334 UGFzc3dvcmWU6
U2hfpd------------- Mail Password
235 2.7.0 Authentication Successful
mail from:[email protected]
250 2.1.0 Sender OK
rcpt to:[email protected]
250 2.1.5 Recipient OK
data
354 start mail input; end with <CRLF>.<CRLF>
This is a Test Mail
250 2.6.0 <internal.mail.smtp.com>
Queue Mail for Delivery
Mail Received in Inbox
So, My Question is that, I am able to receive the Mail if I directly access SMTP via Telnet then , Why it is not working in OBIEE and it throws error
[nQSError:75006] Failed to send MAIL Command.5.7.1 Client was not authenticated
Please help on resolving the issue?

Mailx unable to send mails to outside world?

hi
on a solaris sparc 9 environment mailx command is unable to send mails to the outside world. What could be the reason & needs to be checked?
thanks

sounds basic, but what's your entry of malhost in /etc/hosts pointing to? If it's not there, add the entry with the IP address of your SMTP host.
when sending test mail from mailx, have another window open thats tail-ing the contents of /var/log/syslog - that usually contains good info about sendmail.
another thing worth checking is the rules on your SMTP gateway. If this is a new host, it may need adding to the list of authorised relay list. Also check to see if the SMTP host is alowed to relay mail outside of its own domain too.

HT1277 i can receive mail but unable to send mail

i can receive mail but unable to send mail

I'm yet another person who upgraded to Maverick OSX. I'm now thinking, "BIG mistake". Mail was working perfectly. Then, last night, Mail stopped sending.
I've checked everything. Comcast servers are set up correctly. Mail works fine on my ipad, but will not send. It gives me a SMPT error of "Cannot send message using the server comcast.net--authentication rejected" Comcast.net (Offline). I can not get it back online. I've also tried the fixes here, but there is no info.plist by those names in my library!
Anyone have any other ideas how to get this working again? Apple's OS's have been pretty decently stable in the past. I had no thought that the upgrade would be so problematic. Live and Learn.
Thanks for any suggestions.
-Rachel

I am unable to send mail from my Orange.fr account on my ipad add

Orange.fr lost personal data on Sunday, so I decided to change the password on my mail account which I did successfully can pick up and send mail via Thunderbird on my PC. However, I had to delete my orange account from the mail application as it would let me change the password in settings. I can now receive mail OK, but I an unable to send as I get the message that "That the username or password for "SMPT (email address)@smtp.orange.fr" is incorrect. I have checked the server settings against those on Orange.fr website, and they are correct. Any ideas what the problem is?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I'm unable to send mail please can someone help me fix it

I have suddenly started to get an error message when sending some of my mail it is telling me to go to my "Temporary Directory Settings" as it's unable to send through C:\Users\Tina\AppData\Local\Temp\nsmail.tmp
I have tried unticking my email attachments in my anti virus as I was told to do the last time I had a problem, but to no avail. Please can someone help me fix this and preferably in step by step form ?

I suggest you contact McAfee for instructions. I don't use their product and a year after it started making life hard for Thunderbird users i am sure they can offer constructive workarounds.

Unable to send mail on ipad

I am unable to send email to a specific address from my iPad. I can send from iPhone and iMac this address. Any ideas. Just updated all mobil devices to iOS 7.0.6 but the problem still exists.

I solved my problem by entering user name and password in the outgoing server fields in my mail account. It says they are optional but not for me.

Unable to send mail

I am suddenly unable send mail from my computer using Mail, though I am able to receive mail. This happened around the time ".mac" turned into "mobile me". The support pages only detail mail setup for OS 10.4.9 or later. I am on 10.3.9. Do I need to upgrade my whole operating system to continue to use Mail with my account? If not, what settings do I need to change?

Hi Mike,
.mac changed to Mobileme about 7 months ago, so maybe it is not related to this at all.
Your .mac email address should still work with 10.3 Panther.
Have a look at this posting at this link;
http://discussions.apple.com/thread.jspa?messageID=8685673&#8685673
regards roam

Unable to Send Mail - Part Deux

Similar Messages

Maybe you are looking for