Unable to set browser preview options

I posted this a few days ago and didn't get any responses, so
am trying again in case I'll have better luck today. :-)
I hope someone can help because this problem, which suddenly
occured, is makign it impossible for me to do any work in
Dreamweaver and that's driving me crazy... :-0
Thanks!
I feel a bit silly about this - but for some reason I am
unable to set the browser preview options in my preferences. I'm
using Dreamweaver 8 on a Mac OX10.3.9, and trying to designate
Firefox 1.5 as my default primary browser, and Safari 1.3.2 &
IE5 as secondary options. When I first open Dreamweaver I get a
message saying 'Unable to read Preview in Browser Preference.
Please remove all browsers form the list and add them again". So I
remove them all and when I try to add them back, none of my choices
show up in the box. Then I restart and the old ones are still
there. If I try to change the check in the box that indicates
primary or secondary browsers, my program crashes. Anyone have a
clue what's going on? Thanks so much for any help...

This - file:///ether/Patricia Yenawine/images/oxblood_med.jpg
- tells me
that your local root folder is on a network shared drive. I
am guessing
that your problem stems from the fact that network
permissions/protocols are
interfering with your ability to successfully write your
cache files and
your browser preferences.
Do you have the same problem with sites that are truly local
to your
computer?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"amysue102" <[email protected]> wrote in
message
news:e48hoq$ba0$[email protected]..
> Originally posted by: Newsgroup User
> Open DW, select a site, create a new page, and insert an
image from within
> that site to insert on the page. Without saving the page
(!important)
> copy
> the code and paste it into a reply here, please.
>
> Murray,
>
> Thank you! for helping...
> I followed your direction - here's the code:
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=ISO-8859-1" />
> <title>Untitled Document</title>
> </head>
>
> <body>
> <img src="file:///ether/Patricia
Yenawine/images/oxblood_med.jpg"
> width="158"
> height="115" alt="oxblood bowl" />
> </body>
> </html>
>
> May Blessings rain upon you!
>
> Amy
>

Similar Messages

Setting Browser Preview Preferences

I feel a bit silly about this - but for some reason I am
unable to set the browser preview options in my preferences. I'm
using Dreamweaver 8 on a Mac OX10.3.9, and trying to designate
Firefox 1.5 as my default primary browser, and Safari 1.3.2 &
IE5 as secondary options. When I first open Dreamweaver I get a
message saying 'Unable to read Preview in Browser Preference.
Please remove all browsers form the list and add them again". So I
remove them all and when I try to add them back, none of my choices
show up in the box. Then I restart and the old ones are still
there. If I try to change the check in the box that indicates
primary or secondary browsers, my program crashes. Anyone have a
clue what's going on? Thanks so much for any help...

Same thing just happened to me, DW 2004 mx on Mac ox 10.4.10.
"When I first open Dreamweaver I get a message saying 'Unable
to read Preview in Browser Preference. Please remove all browsers
form the list and add them again". So I remove them all and when I
try to add them back, none of my choices show up in the box. Then I
restart and the old ones are still there. If I try to change the
check in the box that indicates primary or secondary browsers, my
program crashes."
Any suggestions? Trash preferences? Reload? I also tried a
restart with an unplug for good measure, no dice. Thanks!

LMS Ver 4.0.1 unable to set error count options

I have a recent new install of Cisco Works and all is working fine. My issue is with a feature that doesn't seem to be present. When I create a report to ccheck on sys logs the report returns all sys log whether they are repetitive or not. Is there a way to have a same sys log error come back with a number of ocurences?
the feature doesn't show up when I create a custom report?
thanks Yvon

Thanks Gaganjeet! I was hoping for a report that would give me for example env-mon syslog and the number of occurences but if this is the only way I will have to live with it.
appreciate the response.
Yvon

How to set the same in mozilla? : 1. Go to Tools(Internet Browser)- Internet Options- Security

''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
2. Select the Security tab
3. Click on the Internet zone icon at the top of the tab page
4. Click the Custom Level button
5. In the Miscellaneous section change Display mixed content to Enable
6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
solved the issue, could u suggest how to set the same in Firefox pls?
Thank you!

''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
2. Select the Security tab
3. Click on the Internet zone icon at the top of the tab page
4. Click the Custom Level button
5. In the Miscellaneous section change Display mixed content to Enable
6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
solved the issue, could u suggest how to set the same in Firefox pls?
Thank you!

Unable to find Shopping Cart Preview Option in SRM Shopping cart Applicatio

Hi Guys,
I am a testing some scenarios in SRM-MDM Catalog and SRM Shoppincart where i have to add some items from SRM-MDM Catalog to Shopping cart preview but i dont find any Shopping Cart preview option. Can any one make me clear how to know which SRM Portal User has privelege to see that Shopping Cart Preview option.
Thanks
Ravi

Hi Ravi,
Can any one make me clear how to know which SRM Portal User has privelege to see that Shopping Cart Preview option.
This totally depends on the settings made for that User in Configuration UI.
When you open your Configuration UI with User Master and password Blank (empty), you will get screen as shown in page 24/28 Configuration view. Here you will select User e.g. User1 not Default User to whom do you want to assign Shopping Cart Preview Option by clicking on radio button Cart Preview in shopping options under General tab. Then the same user you will define in External webservice.
Please refer Page 24/28 of this below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8?quicklink=index&overridelayout=true
Kindly revert with result.
Regards,
Mandeep Saini

[CUPS] Unable to set my new CUPS server with an HP printer (solved)

Hello,
I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
(all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
Here are a list of installed package : cups ghostscript gsfonts hplip
The printer (USB) :
(lsusb)
Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
(dmesg)
usb 2-2: new full speed USB device using uhci_hcd and address 4
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
Current configuration (only change made to original configuration) :
Listen <ip_serveur>:631
<Location />
Order allow,deny
Allow From all
</Location>
<Location /admin>
Order allow,deny
Allow From all
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow From all
</Location>
When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
I look in log and I can just see this :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
I googled for one hour, but is not more working right now ...
Some questions :
- the printer is not detected? Is it because of the ACLs errors ?
- what the hell is "ACLs" for cups ? Never seen that before ...
So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
Any idea on what to do/try now ?
EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
Unsupported format 'application/vnd.cups-command'!
Current log file :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
(web interface)
"/usr/lib/cups/backend/hp failed"
(error_log)
E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
- hpijs, 3.10.9
- hpijs, 3.10.9.11
- hpcups, 3.10.9
Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
Thanks for all .. hope you don't think I'm crazy ^^
Last edited by loopx (2011-01-09 20:31:21)

WD and their lack of support for Mavericks:
A recent email from WD reads:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
What can I do now that I installed the flames of **** onto my computer?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

The preview option in FCK doesn't work when using trought an external app!

Hello everyone!
I have an issue with the FCK-editor when using in an external application.
We are executing the “WCM_EDIT_DATA_FILE” service to launch the FCK contributor application in a portal (Webcenter) so we can edit datafiles. The preview option (preview butto) does not apply a region template and the content is shown in the same order as defined in the region definition. Viewing the same datafile trough Site Studio I can see that the preview option applies a region template.
I've compared the links but I am not getting anywhere.....
The links for the preview are:
Via the portal:
http://MyServer/vcc/idcplg?IdcService=SS_QD_GET_RENDITION&coreContentOnly=1&dDocName=DF_NEWS_BERLIN_8&dID=765&wcm.contributor.mode=false&IgnoreContributorOnly=true&previewId=1276003853183&WCMPopupId=POPUP09875462424653607178
Via Site Studio:
http://Myserver/VCCPOC/index.htm?wcm.contributor.mode=false&IgnoreContributorOnly=true&previewId=1275983448108&WCMPopupId=POPUP07808631203986127290
I can see that the portal link has the same parameters as the Site Studio link and some more. I even tried adding a region template in the url by adding my template as a parameter like this "&templateDocName=RT_BOUND_DETAIL_VIEW" just to force it but without any luck. The same goes for the "view differences"-button in the FCK editor.
Has anyone had this problem?
Thanks

Hi Stijn,
Here is the link to the SS-services:
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10615/c11_ss_services.htm#insertedID0
And here is the link to the CS-services:
http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/developer/services_reference_10gr3en.pdf
The name of the service that creates new data file is CHECKIN_NEW_FORM.
Saving the file from the FCKEditor makes the browser window "greyed out" so for the time being we are hitting the "go back"-button in the browser to return to the portal... as we open the editor in the same window as the portal. However, there must be another solution as this is fare away from user friendly!
Let me try to answer some of your questions:
- Are you also using the Site Studio publishing functionality (we will not)
No, we are not either.
- where will your site design be done (we'll try to do as much as we can in WebCenter to keep it all in one place; we might even just output XML with our templates from SS, and transform it in WebCenter using different "templates")
We are also planning to have it all in WebCenter. We are using SS for creating region templates and subtempalates used in the portal (Webcenter/ADF) for showing the same data files in different ways. That means that we also have elements, region definitions, placeholders and so on in the SS.
- what are you doing with inline images in the FCKEditor (we want contributors to be able to upload there images easily from the Editor, without the need to browse to UCM)
Well, for the time being the contributor must browse the some images from the CS because the images must have a certain height and width... so that is our way of controlling that the user is choosing from the approved images. When it comes to images in the text the contributors can add as many images as they want that are not from the CS. They can just copy/paste them in the editor from whatever location they want.
- is it correct that the metadata tab cannot be used in combination with profiles defined in UCM (see other thread WebCenter Content
I've heard that before so my guess is that it's true. My question then is how do I do to hide the metadata tab if I do not use it?
- will you be using the ctrl-shift-F5 functionality to edit content, or just create a link to the WCM_EDIT_... service in a popup window?
We create a link to the WCM_EDIT_... service that opens in the same window as the portal.... but as I mentioned earlier that is not the most user friendly solution so we probably must change that....
Now back to my problems:
I know why the preview trough the portal and the site studio differs.
The services that are used when previewing content trought the SS are:
SS_SET_PREVIEW_ELEMENT_DATA
SS_GET_PAGE
LOAD_DOC_ENVIRONMENT
The services that are used when previewing content trought the portal are:
SS_SET_PREVIEW_ELEMENT_DATA
SS_QD_GET_RENDITION
LOAD_DOC_ENVIRONMENT
The SS_GET_PAGE actually shows a page in SS and as soon as there is a region template attached to the page you are able to see the content the way you want. That is not the case then calling the SS_QD_GET_RENDITION service. So my question is if there is a workaround where I can force a region template to be used con conjunction with the SS_QD_GET_RENDITION service?
Anyone? All ideas are really appreciated!

Excel Named Items not showing up in Browser View Options list

Hi,
Using excel 2013 - when I create named ranges under the 'formulas' tab, I expect to see them show up in the 'show' tab under Browser View options. However they aren't there - when I look at the 'items in the workbook' list I only see the charts and
pivot tables in my workbook, not the named items.
Is there some setting I need to flip on to see these times (and then use them in sharepoint)?
Thanks

Today, I tried it again and now I could see the Name range under Browser View Options list, this is my step as below:
1. Type the value in Cell A1 to B4. (Same as the screenshot as the last reply)
2. Directly type Test in Name Box.
3. Go to File > Info > Browser View options > Items in the Workbook.
Now the Name is appearing.
But when we define a name to a blank range, we would not see the Name in the Browser View options anymore. Try in your site.
By the way, My using version is Office 36 ProPlus, version 15.0.4551.1005.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Unable to set volume attribute "min-autosize" for volume

We have a TDP volume(destination), that is in snapmirrored state from 7Mode to cDOT.While trying to resize/increment the volume size by say 100g we get the following error. clusterName> volume size volumneName -vserver vserverName +100gWarning: Volume "vserver:volumeName" is a SnapMirror destination volume. The Filesystem Size for this volume is derived from its source and cannot be changed. The specified size will be used as the Volume Size.
Do you want to continue? {y|n}: y Error setting size of volume "vserver:volumeName". Unable to set volume attribute "min-autosize" for volume
"volumeName" on Vserver "vserverName". Reason: Volume 'volumenName' is a snapmirrored volume.
vol size: Flexible volume 'volumeName' size limit set to 8022664413184. Any idea ? Volumes autosize mode is false.

Hi I am not trying to change any setting. I am trying to increase the size of the volume. I understand in case of a Snapmirrored volume the fs_fixed options is ON.But one can always increase the actual volume size using vol size command. Even if I increase the size on ONTAP on the file system side it will show as the size same as source. I understand that. So my question is why is it prevenitng me from increasing the size. RegardsAdai

Browser preview menu bar navigation problems

Hey everyone I have a very strange problem that I honestly have no idea at all how to handle.
Below is a template I've put together. It's for a pump repair business site (to provide clarity on any content).
Everything was going smoothly, until I previewed it in the browser (using Firefox and Chrome). I can jump from page to page about twice, but, after that, especially when I try to return to the home page, I recieve an error like this:
' No webpage was found for the web address:file:///C:/Users/John/Desktop/Design/Merit%20Pump%20Website/MeritPump_Template.dwt '
And I am also not able to access my submenus in the browser preview, and inevitably NOTHING will work after the first few jumps between pages.
My code is below. Thank you so much for any help- this is my last major roadblock before I am able to publish.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>Untitled Document</title>

<style type="text/css">

</style>
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script src="../Scripts/swfobject_modified.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />


</head>
<body class="oneColFixCtrHdr">
<div id="container">
<div id="header">
    <h1>
      <object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="781" height="200">
        <param name="movie" value="../Merit Pump Site Images/Merit_Banner-02-01.swf" />
        <param name="quality" value="high" />
        <param name="wmode" value="opaque" />
        <param name="swfversion" value="9.0.45.0" />
        
        <param name="expressinstall" value="../Scripts/expressInstall.swf" />
        
        
        <object type="application/x-shockwave-flash" data="../Merit Pump Site Images/Merit_Banner-02-01.swf" width="781" height="200">
          
          <param name="quality" value="high" />
          <param name="wmode" value="opaque" />
          <param name="swfversion" value="9.0.45.0" />
          <param name="expressinstall" value="../Scripts/expressInstall.swf" />
          
          <div>
            <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
            <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" /></a></p>
          </div>
          
        </object>
        
      </object>
    </h1>
</div>
<ul id="MenuBar1" class="MenuBarHorizontal">
    <li><a href="../MP-index.html">Home</a>    </li>
    <li><a href="../MP-Kobepumps.html" class="MenuBarItemSubmenu">Services</a>
      <ul>
        <li><a href="../MP-Kobepumps.html">KOBE Pumps</a></li>
        <li><a href="../MP-Myerspumps.html">MYERS Pumps</a></li>
<li><a href="../MP-Industrial.html">Industrial</a></li>
<li><a href="../MP-Oilfield.html">Oil Field</a></li>
      </ul>
    </li>
    <li><a href="../MP-Contact.html">Contact</a>    </li>
    <li><a href="../MP-About.html">About Us</a></li>
</ul>
<div id="mainContent">
<p> </p>

<p>Merit Pump and Equipment is an authorized dealer for <b><font color="#900">Kobe, Weatherford and Myers</font></b> pumps supplying you with both pumps and parts. We are also a factory authorized pump service center for your pump repair needs.</p>
<p class="MsoNormalCxSpMiddle" style="line-height:normal;"> <b><font color="#900">Myers</font></b> offers a complete line of submersible sump, sewage, effluent,   grinder, non-clog and wastewater pumps, controls, basins and accessories, reciprocating, self-priming and pumping systems for residential, agricultural, commercial, municipal and industrial applications.</p>
<p class="MsoNormalCxSpMiddle" style="line-height:normal;"><b><font color="#900">Myers Aplex</font></b> offers a complete line of high quality, medium to heavy duty reciprocating pumps for both intermittent and continuous duty.</p>
<p class="MsoNormalCxSpMiddle" style="line-height:normal;"> <b><font color="#900">Kobe</font></b> offers a unique vertical plunger pump, as well as the Weatherford horizontal   design for high pressure applications. The "Kobe" pump is especially well suited for extreme pressure services up to 30,000 PSIG.</p>
<p align="center" class="disclaimer" style="line-height:normal;"> </p>
<p align="center" class="disclaimer" style="line-height:normal;"><em>Other Lines we carry include LMI metering pumps, Hydra-cell pumps, Vector Peristaltic pumps, Grinnell butterfly valves, Milliken Valves, All-Flo diaphragm pumps, Blancett flow meters, Pacer pumps, Proco Products expansion joints and others.</em></p>
<p align="center" class="MsoNormalCxSpMiddle" style="line-height:normal;"> </p>
<table id="Table_01" width="740" height="60" border="0" cellpadding="0" cellspacing="0">
    <tr>
      <td><a href="http://www.columbiantectank.com"><img src="../Merit Pump Site Images/Service1.jpg" alt="" width="195" height="60" border="0" /></a></td>
      <td><img src="../Merit Pump Site Images/Service2.jpg" width="172" height="60" alt="" /></td>
      <td><a href="http://www.femyers.com/"><img src="../Merit Pump Site Images/Service3.jpg" alt="" width="184" height="60" border="0" /></a></td>
      <td><img src="../Merit Pump Site Images/Service4.jpg" width="189" height="60" alt="" /></td>
    </tr>
</table>

<p align="center" class="MsoNormalCxSpMiddle" style="line-height:normal;"> </p>
</div>
<div id="footer">
    <p><span class="footer">© 2006 Merit Pump & Equipment CO. All rights reserved. | Home | About | Contact | FE Myers | Kobe Triplex |</span></p>
    <p><span class="footer">975 Lincoln Way West, Wooster, OH 44691 | PO Box 960</span></p>
</div>
</div>
<script type="text/javascript">

</script>
</body>
</html>

Hi!
1. file:///C: /Users/John/Desktop/Design/Merit%20Pump%20Website/MeritPump_ Template.dwt '
1.1 Suspicious are always these strings starting with file:///, what means, "DW thinks that every file you have linked to is outside the local root folder":
1.2. Don't use spaces in folders/filenames. Spaces get converted %20, you could use underscores eg.
2. ../MP-Kobepumps.html
Where is this file located? Please control your path in DW, maybe you need ../../, maybe you can do without it, depending on which level the file is situated/nested.
... maybe you can post a link to your page, no matter how it looks like.Hans-G.

Unable to set Guest Network

I have set up a Wifi Network using one Apple Airport Extreme.
While me regular WiFi network is hidden and working fine, I am unable to set up the guest network.
I have enabled the guest network option with a password. under the wireless tab in airport utility
My internet connection is using DHCP.
The Router Mode in Network is OFF (Bridge Mode)

The Router Mode in Network is OFF (Bridge Mode)
That.....is one of your problems, since the Guest Network option will not operate correctly when the AirPort Extreme is configured to operate in Bridge Mode.
The other problem that you have.....is that Bridge Mode is actually the correct setting for the AirPort Extreme when you have another router "upstream" on your network......as you do.
To confirm that you have a modem/router or gateway device on your network........and not a simple modem, which is the device that you really need to enable the Guest Network to operate correctly.....please post back with the make and model number of your existing modem/router or gateway device that is providing your regular Wi-Fi network at the present time.

Unable to set columns under Layout Margins and Columns

On certain pages in my 40 page document, I am unable to set the number of columns by using Layout>Margins and Columns. The columns option is dimmed out. I have tried to set them on a blank page and pages where columns were previously set (I can see the guides). I am using a single Master for page numbering and it is applied to every page in the document. There are pages where I can set the columns. I've done some page comparison and can't find the setting that might control this. Using InDesign CS6 on Windows. Thank you.

Why are you not using multiple column text frames instead of 2 text frames with columns on the master page? This would give more flexiblity.

Unable to set default program for .pdf

CURRENT PROBLEM:
As show in print screen, when i attempt to set default program nth happens at all. The only way i can open any .pdf file now is by 1st opening adobe reader 9 and select the .pdf file manually
INITIAL STAGE OF PROBLEM:
Problem started after upgrading to windows 7 from vista. Windows 7 is able to recognise adobe reader 8 as a valid default program since it is in windows.old. Thus the default for .pdf is adobe reader 8 (it was installed in vista).
Subsequently, installing adobe reader 9 isof no use as it will be ignored and windows 7 will only continue to use adobe reader 8 as the default reader when i try to open a .pdf file, unless if i manually opened adobe reader 9 and selected a .pdf file manaually
However, I am unable to uninstall adobe reader 8 as the "program and feature" can only identify adobe reader 9 and does not think that adobe reader 8 exists.
ATTEMPTs TO SOLVE:
Thus, I removed windows.old by using the disk cleanup. However, I am still unable to set adobe reader 9 as the default reader. Instead, .pdf are no longer accessible/"open-able" unless I 1st opened adobe reader 9 and then selected a .pdf manaually.
I've attempted reinstalling and restarting comps etc, they dun seem to help. I suspect the OS is now only able to recognise adobe reader 8 from windows.old as a valid program directory due to some registry issues since it was initally set as the default when i 1st upgraded the OS. Now that adobe reader 8 is removed, there might be some corrupted registry somewhere that needs to be set right again?
Really need help with this. Thanks a million.

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

How to setting the printing option in javafx 2.1 or later?

Hi,
We need to printing pdf document in our project, it's can use the open source to do it now, but it's has some problem when running the program in other pc.
Step 1, It's setting the program with full screen in our program.
Step 2, In the button event, we call JDK swing print dialog to setting the page option.
They will not bring the swing frame to front, and the Javafx program unable to response cause by the swing printdialog.
If anybody know how to deal with the paper option setting by Javafx, Please help me, thanks a lot.

Vibhor - You are developing using the Oracle Application Express facility running on Oracle Database 10g Express Edition. You can export applications you develop there for use on Oracle Application Express versions 2.0 and higher which can be used with Oracle Database server versions 9.2.0.3 and higher.
Electing to install an application as Run Application Only will prevent the editing of the application definition by the end user. This can be useful if you assume that the end user will have access to the Application Builder in his database, which is likely if the end user's database is Oracle Database 10g Express Edition (XE). However, there is no way to prevent an XE user from having complete control over applications installed into those databases. If the end user's database is not XE, then only an Oracle Application Express site administrator will be able to change the application's Run Application Only setting to Run and Build Application but all developers with developer accounts in the Application Builder will be able to view and edit the application definition.
Further, when you say "he can easily access my code", remember that the application definition is contained completely within the export file that you distribute but you may have in mind your PL/SQL source code as well. PL/SQL can be wrapped using a utility to make it more difficult to see in clear text.
Scott

Unable to set browser preview options

Similar Messages

Maybe you are looking for