Unable to set correct resolution in games

Hey,
Tried to start up Jedi Academy to give my 256 graphics card a spin on the new 20" iMac. It's pretty cool, but I can never get the resolution set right. It can only go to 1024x768 instead of 1600xwhatever which is what I want. I know the iMac display is 1680, so is the game just not capable of going any higher? this happens in other full screen apps as well, mostly games. I noticed that if I set my display to 1200 and then try that in the game, it still won't work, it shrinks the display to a fraction of the full screen(hope that makes sense). Any ideas?
Thanks,
Rudz

I've had some curious problems too: I was previously able to run Doom 3 in 1600x1200, but for some reason, lately, the console shows that it can't find a Display Mode, and by default goes to 640x480. I've tried reinstalling the 1,3A patch to no avail. Now I can only go to 1024x768, too.
What's toggling this? Where's the hidden option?
Am curious if this could have been prompted by difficulties with a prebuild of VLC and some Front Row errors I was having...was sthg changed in the Display Modes??

Similar Messages

T420s - Unable to set high resolution when on external monitor via DP.

Sorry, let me clarify -
Unlike the OP, I do *not* switch back to 50 Hz on battery. However, I am running the NVIDIA beta driver. I installed this because with the Lenovo driver, the machine was not outputiting 2560x1600 over the display port. The highest resolution it would output was 2048 x 1000-something (out of the office now and don't have the exact numbers).
So yes, with the Lenovo driver the external DP was working, just not outputting the highest resolution. Installing the Nvidia driver fixed that problem. Whether it is related or not, I don't know, but with this driver I do not get 50Hz resolution on the LCD on battery -- everything stays at 60.
I have not rolled back to the Lenovo driver to test whethe this is reall a driver issue, but suggest that the OP try out the Nvidia driver.
edit note: Change subject to match description.

The unable to set high resolution issue on the T420 (not the T420s) was sent to engineering by JameZ just a few days ago. See more here. I suggest you post there or contact JameZ so they know it also occurs on the T420s.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

Unable to set correct default text code

To enable accented characters to display properly I need to use Western Latin 1 as the default. When I set this manually in "view" it works but although it is set as the default preference, it always reverts to something else when I open Safari.

That seems to answer part of my problem. I am not
sure how to provide an example but it occurs with
MyYahoo in English, when part of the display is in
French. I get the black diamonds with question marks.
If I manually change to ISO Latin 1, the French text
is correctly displayed. However, when I open Safari
again, the sme problem reoccurs.
This would seem to indicate that the MyYahoo English page has html forcing a different encoding than the French text. You can check what it is by doing View > View Source and looking for the "charset" in the first few lines. I suspect it may be UTF-8. Unless Yahoo lets you set the encoding of your page in its preferences somewhere, I do see anything you can do about it.

Error NtpClient was unable to set a manual peer. DNS resolution error When using IP address.

Hya,
We have been migarting to some new DCs. one of the new DCs now has all the master roles call it DC01.
when I try and sync/setup NTP on this server as the the authoritive NTP in the doamin I get:
NtpClient was unable to set a manual peer to use as a time source because of DNS resolution error on '”10.*.*.*,0x1”'. NtpClient will try again in 15 minutes and double the reattempt interval thereafter. The error was: No such host is known. (0x80072AF9)
I am using the following commands to set NTP up on the server.
>net stop w32time
>w32tm /config /syncfromflags:manual /manualpeerlist:"10.*.*.*,0x1"
>w32tm /config /reliable:yes
>net start w32time.
Is anyone aware of what the issue could be?
Ps one of the old dc can still sync to this site manually if tried.
cheers Mike

Hi,
First make sure your DNS is working properly, then please try this article below:
Event ID 134 — Manual Time Source Acquisition
http://technet.microsoft.com/en-us/library/cc756393(v=ws.10).aspx
Hope this helps.

HT4557 I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

Hello daltonfromgbr
Check out the article below to troubleshoot you issue with connecting to Home Sharing. It will walk you through checking firewall settings as well as your network connection.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Regards,
-Norm G.

Unable to set parental controls on itunes b/c my username and password are not correct. How do I reset them? There is no prompt to give any clues what they are.

unable to set parental controls on Itunes b/c my user name and password got rejected. How do I reset them or figure out my username and password?

This is a user to user support forum. We are all iphone users just like you.
You are not addressing Apple here at all.
This is an odd way to ask your fellow iphone users for help. Berating oterh users will not help you.
"it's too fragile"
No it is not. i have never damaged one, nor has anyone I know.
" U loose data when Ur phone is locked"
No you don't. Why do you think this?
"and there is no customer support!!! "
Wrong yet again. Apple has an 800 number and they have many retail stores and they have support articles that you can access using the search bar. Or you can contact them throgh express lane online
"but I will go back with Blackberry "
Please do.
Good ridance

Gnome 3.4.1 unable to set resolutions for a dual-monitor setup

I use Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller.
I updated my system to the latest version of everything. Gnome-Shell works, gnome-control-center works, but the Displays icon doesn't (clicking on it does nothing). I even downgraded it to the version 3.2.2 but it didn't help. Is there any other way to set the resolutions?
Edit: xrandr can do the resolution thing. But problems start appearing:
[ly@archlev ~]$ gedit
gedit: symbol lookup error: gedit: undefined symbol: gtk_ui_manager_add_ui_from_resource
[ly@archlev ~]$ gnome-system-monitor
gnome-system-monitor: symbol lookup error: /usr/lib/libgtkmm-3.0.so.1: undefined symbol: gtk_application_window_get_type
Last edited by dxxvi (2012-04-24 05:38:12)

Have you tried XRandR through an xorg.conf file: Here?
If it doesn't work you can always drop to a terminal and
sudo rm /etc/X11/xorg.conf
to remove the file and reboot and you should be back where you started.
Don't forget to substitute the VGA1 and HDMI1 ports in that example with your ports as given by
xrandr -q
Edit: in the unlikely event you already have an xorg.conf file don't forget to back it up in case you need to restore it instead of the above rm command.
Last edited by headkase (2012-04-24 05:47:49)

Unable to get 1920x1080 resolution [Solved]

I am trying out a Philips 24" LCD monitor, capable of 1920x1080 at 60Hz. My graphics card is an nVidia FX-5600DT and I am using the nvidia-173xx driver. At present I can only get 1280x1024.
Here is my xrandr output:
Screen 0: minimum 320 x 240, current 1280 x 1024, maximum 1280 x 1024
default connected 1280x1024+0+0 0mm x 0mm
1280x1024 50.0*
1280x960 51.0
1024x768 52.0
896x672 53.0
800x600 54.0 55.0
640x512 56.0
640x480 57.0 58.0
512x384 59.0
400x300 60.0
320x240 61.0
Here is my xorg.conf file where I have attempted to force 1920x1080:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Sun Nov 8 21:50:38 PST 2009
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "dbe"
Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30 - 83
VertRefresh 56 - 75
Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118
Option "PreferredMode" "1920x1080_60.00"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV31 [GeForce FX 5600]"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
And here is my Xorg.0.log output:
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 10 12:11:30 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0312:147b:8f19 nVidia Corporation NV31 [GeForce FX 5600] rev 161, Mem @ 0xde000000/16777216, 0xe0000000/268435456, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.22 Sun Nov 8 21:42:44 PST 2009
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 173.14.22 Sun Nov 8 20:43:40 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5600 (NV31) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 04.31.20.38.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5600 at PCI:1:0:0:
(--) NVIDIA(0): Philips 244E (DFP-0)
(--) NVIDIA(0): Philips 244E (DFP-0): 140.4 MHz maximum pixel clock
(--) NVIDIA(0): Philips 244E (DFP-0): Internal Dual Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(WW) NVIDIA(0): No valid modes for "1920x1080"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0): "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (62, 89); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(WW) NVIDIA(0): Option "PreferredMode" is not used
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event5"
(II) Logitech USB Receiver: Found 12 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found relative axes
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found absolute axes
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(WW) Logitech USB Receiver: ignoring absolute axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Note "(WW) NVIDIA(0): No valid modes for "1920x1080"; removing." from the log. How do I somehow ensure a valid mode? Any other ideas appreciated.
Larry
Last edited by lagagnon (2010-02-11 00:00:30)

Maybe under "Screen" put a virtual resolution, like:
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
Virtual 1920 1080
Sorry if you tried this already or isn't what you want. I just remember having this issue on a desktop I used to have (although I no longer have it), and had nVidia graphics that for some reason wouldn't allow the resolution I wanted so I plugged in Virtual and it worked. Probably not the most elegant ways to achieve it but it worked for me and I didn't see any problems. Anyway, worth a try.

I am unable to use iTunes credits for game credits When I try to purchase a box comes up with an error has occurred please try later"

I am unable to use iTunes credit for game credit purchase. A box comes up with " an error has occurred Please try later" any advice greatly appreciate. Thanks

mgpainter wrote :
prince2012 wrote:
Hi mgpainter
Welcome to the Community
Sorry I am not a RIM employee, But still regarding your problem have a look at this RIM Knowledge Base to resolve the error .Try it and see if it resolves your problem : KB25882 .
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Thanks for the welcome and the reply!
I looked at KB25882 and my settings are good, so that didn't help.
I had this problem over a year ago, and someone at RIM found a bit set that shouldn't have been set and fixed it (that is my terminology for what happened).
I am really looking for a way to contact RIM directly. I hate going through the mill with my carrier to get it escalated to RIM for resolution...... <sigh>
Hi mgpainter
Most easiest way to Contact RIM is through your Carrier but as you don't prefer that than there is another way of support called Incident Based Support but just want to inform you that its not free.If you want have a try BlackBerry Incident Based Support .
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

The application was unable to start correctly (0xc0000142). Click OK to close the application. error: 0x6740090A-0x20003

Hello,
I have installed the app-v 5 client on a 2012 rd server. After publishing the application I’m getting the error “The
application was unable to start correctly (0xc0000142). Click OK to close the application.”
The registry value
NtfsDisable8dot3NameCreation is already set on 2.
The error in the eventlog is
“could not be started because the App-V Subsystem 'Virtual Filesystem' could not be initialized. {error: 0x6740090A-0x20003}”
Thanks in advance
Rene

See this blog post: http://blogs.technet.com/b/gladiatormsft/archive/2013/06/11/app-v-5-0-on-these-0xc0000142-errors-and-where-they-are-coming-from.aspx
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Unable to set session in Oracle Portal useing reverse proxy

I have deployed a reverse proxy (using Oracle HTTP Server) in front of a Oracle Portal Install (version 10.1.2.0.2). The steps followed to set this up came from the following documents:
Steps mentioned in Section 9.2 Configuring a Reverse Proxy for OracleAS Portal and OracleAS Single Sign-On for a reverse proxy on a Oracle HTTP Server.
http://download-west.oracle.com/docs/cd/B14099_15/core.1012/b13998/variants.htm#ASTED005
Also performed steps mentioned in -> Section 5.3.7 - Step 7: Enable Session Binding on OracleAS Web Cache of the Oracle® Application Server Portal Configuration Guide 10g Release 2 (10.1.2) -- B14037-03.
My current (example names shown only)setup details are as follows:
Reverse Proxy for SSO server (running on internal.oracle.com:7777): proxy.oracle.com:7777
Reverse Proxy for Portal server (running on internal.oracle.com:7778): proxy.oracle.com:7778
With the above steps completed, I can successfully use the http://proxy.oracle.com:7777/pls/orasso for login into SSO without any issues.
Users get authenticated successfully.
I can also use http://proxy.oracle.com:7778/pls/portal for viewing pages on the portal fine . All self referencing links have also been successfully modified to point to proxy.oracle.com:7778.
However, an attempt to login in the portal is not successful. Clicking on the 'Login' link successfully redirects to the SSO login page (http://proxy.oracle.com:7777/<login-page>). However, after successful authentication, the success page fails to show up and the user gets shown the initial login portal home page again.
There are no error messages shown on the screen.But it seems that user session is failing to be initiated/set correctly, as shown by the log file (in $PORTAL_ORACLE_HOME/j2ee/OC4J_Portal/application-deployments/portal/OC4J_Portal_default_island_1/application.log ):
06/11/21 16:49:31 portal: [module=RepositoryServlet, ecid=83928411196,1] Repository Gateway: LWUser: PUBLIC, Cookie: oracle.uix=0^^GMT+10:00;
portal=9.0.3+en-au+us+AUSTRALIA+22BC75924EEAD8A2E040007F010019F7+8DAC5E3559C95F5E0090A6F56FFA58192CB0F437CA57A9102A6394F1EB7FAB5DEE3BFA12C65
91C0C009B6......
06/11/21 16:49:31 portal: [module=RepositoryServlet, ecid=83928411196,1] ERROR: Repository Gateway error: Database Error: ORA=20001 ORA-20001:
Unable to obtain session information from the cookie. Please close your browser and reconnect.
ORA-06512: at "PORTAL.WPG_SESSION", line 149
ORA-06512: at line 22
Any help with this will be appreciated.
Thanks.

Hi Chris,
The begin of the expection stack gives you the reason:
06/11/03 09:13:59 java.sql.SQLException: The method 'setSavepoint' cant be called when a global transaction is active
The reason is, that either the whole global transaction must be commited or rollbacked.
I don't know your actual configuration, but between the methods begin() and commit()/rollback() of the UserTransaction instance, OC4J/OracleAS uses a global transaction (= XA transaction) in your configuration. The state of a global transactions is completely under the control of the application server and several restrictions must be considered. One of them is, that you can't use the method setSavePoint/. E.g. you can't also call the method setAutoCommit(true) in this state, or change the transaction isolation level via setTransactionIsolation(newLevel).
This is NOT a limitation of the OC4J/OracleAS but is true for ALL application servers.
P.S. I can successfully set savepoints and rollback to savepoints in weblogic 9.0This means, that WebLogic 9.0 doesn't use a global transaction in this case.
Because I don't know your configurations (Oracle and WebLogic) I can't say, why the behave different in this situation.
Best,
Manfred

Unable to set Guest Network

I have set up a Wifi Network using one Apple Airport Extreme.
While me regular WiFi network is hidden and working fine, I am unable to set up the guest network.
I have enabled the guest network option with a password. under the wireless tab in airport utility
My internet connection is using DHCP.
The Router Mode in Network is OFF (Bridge Mode)

The Router Mode in Network is OFF (Bridge Mode)
That.....is one of your problems, since the Guest Network option will not operate correctly when the AirPort Extreme is configured to operate in Bridge Mode.
The other problem that you have.....is that Bridge Mode is actually the correct setting for the AirPort Extreme when you have another router "upstream" on your network......as you do.
To confirm that you have a modem/router or gateway device on your network........and not a simple modem, which is the device that you really need to enable the Guest Network to operate correctly.....please post back with the make and model number of your existing modem/router or gateway device that is providing your regular Wi-Fi network at the present time.

Why are images not displaying at correct resolution in emails?

I've just upgraded to Windows 7 (64bit).
Thunderbird is not displaying images at the correct resolution: images that I insert into the body of an email and images used in my signature.
The images appear larger than they should and pixelated.
It seems that images are not displaying at the correct resolution inside my emails, whereas in other programs on my machine images are displaying correctly.
When I insert and image into an email using insert>image, the resulting "Image Properties" window displays the image's dimensions correctly. This confirms my suspicion that the resolution is not displaying correctly inside emails (a lower resolution than elsewhere on my screen, which would explain why the images appear bigger and pixelated).
I'd appreciate any help in fixing this problem.
Regards,
Catsix

Hi Zenos,
I've discovered what is causing the problem, but I still need a way to fix it, if possible.
The cause of the problem is that in Windows 7 Control Panel > Display I have set the size of "text and other items" to 150% (otherwise everything is much too small too read on my screen's recommended resolution of 1920×1080).
I discovered that Irfan Viewer was also displaying at the incorrect resolution, but I managed to solve that problem by right-clicking on the IrfanView.exe icon and following Properties > Compatibility and selecting "Disable display scaling on high DPI settings".
I tried the same procedure with Thunderbird, but it made no difference. It is still displaying at the incorrect resolution.
Any suggestions?
Regards,
Catsix

How do I set document resolution

I'm trying to create a pages document that can be exported as a pdf, then converted to an ebook for uploading to an iPad. I've set the document size to 5"x7.5" (2x3 ratio) but can't find a method to set the document resoluton to 120 dpi. When I create the files and convert them (regardless of which PDF quality I use), the pdf file is fine and displays properly, but the conversion splits each page of the pdf file into four separate pages. I'm guessing that's due to the difference in the resolution between 300 dpi and 120. Any ideas?

> I'm trying to create a pages document that can be exported as a pdf, then converted to an ebook for uploading to an iPad.
There are several formats for e-paper and e-book interchange, and the several formats are in two main document models. One set of formats follows from ISO 8879 Standard Generalized Markup Language and the other set of formats follows from ISO-IEC 10180 Standard Page Description Language. For instance, the e-Pub and HTML formats follow from ISO 8879 and the PostScript and PDF formats from ISO-IEC 10180.
> I've set the document size to 5"x7.5" (2x3 ratio) but can't find a method to set the document resoluton to 120 dpi.
In the PS and PDF family of formats, document co-ordinate space has no resolution (: it is resolution indepedent). Objects in the co-ordinate space can either be resolution-independent (: scalable shapes that only get a resolution when they are rasterised to a specific device, for instance, TrueType typography, Type 1 typography, lines, and boxes), or resolution-dependent, for instance, photography.
For resolution-dependent objects, applications support two workflows. Some applications such as Apple Pages work on the assumption that you set the resolution in the software you use for exposure correction, other applications such as Adobe InDesign and QuarkXPress work on the assumption that you can do this later when the publication is processed. However, since you can't upsample from a lower to a higher resolution successfully in QuarkXPress or InDesign, it makes no difference if you don't save the resolution you need from the source application software.
So, begin by selecting the photographs you want, correct the exposures, and save the exposures with the ICC profile for the colour correction space into a named folder at the resolution you want. Then place them in whatever application you want, and save into PDF.
> but the conversion splits each page of the pdf file into four separate pages. I'm guessing that's due to the difference in the resolution between 300 dpi and 120. Any ideas?
Since the document co-ordinate space in PostScript version twenty-something in the original Apple LaserWriter of January 1985 is always resolution-independent, it has been possible to tile several pages in the document space onto a single page in the device space of the printer. The number of pages you can tile depends in principle on the tiling geometry in the application that writes the page description program (2-up, 4-up, 8-up, 16-up and so forth), and in practice on the size of the printer format (A4, A3, A3 and so forth).
If a single page is split into several pages, then either the user has to have asked for this (for instance, when proofing a very large document co-ordinate space by tiling it onto a very small device space for a poster on a LaserWriter), or the user has to have accidentally made the settings for the printing system assume that this is the case. Without knowing what printer or what printer driver you have installed, a suggestion might be that your printer driver is passing the wrong information backwards to the system software. Printer drivers are made by printer manufacturers and may be specific to the printer model. You might have more luck if you ask the printer manufacturer's list. Otherwise, try the formatting option 'for any printer' when you write out your PDF page description program, open the page description program in Apple Preview, and then let the printing system do what it does - hopefully to your satisfaction.
Best,
Henrik

Unable to view higher resolution pictures in forms

Hi All,
There is an existing custom form, which has a table data block consisting of header_id,BLOB(image) fields.
there are "upload_image" and "remove_image" buttons.
when i press upload button a window opens and i select an image and press OK it is uploaded into into table.
The code is as below
plist := GET_PARAMETER_LIST (:SYSTEM.custom_item_event_parameters);
GET_PARAMETER_ATTR (plist, 'OPENDIALOG', ptype, pvalue);
uploaded_file := pvalue;
v_chr_path :=
SUBSTR (uploaded_file, 0, INSTR (uploaded_file, '\', -1)
- 1);
v_chr_name := INSTR (uploaded_file, '\', -1) + 1;
GET_PARAMETER_ATTR (plist, 'LASTDIR', ptype, pvalue);
set_last_dir (pvalue);
SET_CUSTOM_ITEM_PROPERTY ('FILE_DIALOG', 'GFMAGENT', fnd_web_config.gfm_agent );
gfm_access_id := fnd_gfm.authorize (NULL);
SET_CUSTOM_ITEM_PROPERTY ('FILE_DIALOG', 'ACCESSID', TO_CHAR (gfm_access_id) );
SET_CUSTOM_ITEM_PROPERTY ('FILE_DIALOG', 'UPLOADFILE', TO_CHAR (NULL));
SELECT file_id INTO v_num_file_id FROM fnd_lob_access WHERE access_id = gfm_access_id;
g_num_header_id := :main_block.header_id;
transfer_file ------>database procedure to upload image
(o_errbuf => v_chr_err_buf,
o_retcode => v_num_retcode,
o_num_imag_size => v_num_image_size,
i_num_access_id => gfm_access_id,
i_chr_button => g_chr_button,
i_chr_area => g_chr_area,
i_num_header_id => g_num_header_id
execute query;
transfer_file has query as
EXECUTE IMMEDIATE ' UPDATE '
|| i_chr_area
|| ' SET '
|| i_chr_button
|| '= (SELECT FILE_DATA FROM FND_LOBS FL,
fnd_lob_access FLA
WHERE FLA.access_id = :1
and FLA.file_id =FL.FILE_ID ),
last_update_date = sysdate
WHERE HEADER_ID = :2'
USING i_num_access_id, i_num_header_id;
image are loaded to database table
I am able to view images of resolution less than 720X600 (approx) in front end.
But I am unable to view higher resolution images.
Can Some one help me how can i View higher resolution images?

Forms version?
Have you read the Restrictions in Form Builder help under READ_Image Built-in?
Cheers,

Unable to set correct resolution in games

Similar Messages

Maybe you are looking for