Unable to set site master page and system master page separetly in SP 2013

hi,
How to set site master page and system master page separetly in SP 2013,even setting different master pages through code or UI.Always only  single custom master page is getting applied for both.
Thanks & Regards, Krishna

Check below:
http://msdn.microsoft.com/en-us/library/office/ee537530(v=office.14).aspx
Normally on Masterpage setting of publising site the second option is for Settings page and 1st option is for site.

Similar Messages

  • Security questions not working- unable to set up rescue email and reset questions

    I have been trying to buy things off of the app store for a few months now. Every time I am asked to answer my security questions, I will asnwer them (I know they are correct answers), but it keeps telling me they are wrong and then I get locked out of my account. I've tried looking up how to reset them, but when I go to do it, I dont have the option to reset, or even have a rescue email. I dont even recall having the option to set up a rescue email in the first place. On top of all this, apple's support is so inconvenient, I dont usually have the time to call. Has anyone else been having this problem?

    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you  will need to contact iTunes Support / Apple to get the questions reset - you might be able to set a time to call them when you're able to.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • Unable to set up BIS account and company emails

    Hi,
    I have the following story:
    I changed carrier last week, until that everything worked fine, my yahoo, google and company emails. I use BIS.
    Now, I am not able to setup my company email, but my other emails work ok, m phone is registered. I use these emails since many years and had 3-4 different bb models, having no problem to setup all of them.
    So, i tried my new carrier's website to create a new account, I got the following message:
    Cannot create account:  
    This action cannot be performed using a browser on a computer. Use the email setup application on your BlackBerry® smartphone to create an account.
    I called my previous carrier, they say tham my PIN is deleted from their system.
    My current carrier (vodafone hungary) says taht everything is fine from their side, it should work. And I have to fix my company email. When I try to set it up, I got the message that the server is not responding.
    Any idea?

    Thank you for all of those answers...they help a great deal.
    You should talk with your work email admins to see if there's anything special about their system that needs to be accommodated in your configuration. Also, have them review this KB to be sure that they've opened up all that is required for BIS to properly integrate:
    KB11036 Firewall and connection requirements for the BlackBerry Internet Service
    Further, if the auto-configs do not properly sense what is needed, you may need to use advanced configuration...you select that by intentionally providing your correct email address, but an incorrect password. The next screen that should come up has a check-box for you to say you will provide manual settings...check that and then put into the fields what your email admins tell you is needed. That may perhaps work. It's called advanced integration, and here's the relevant KB:
    KB10154 How to integrate a POP or IMAP email account through advanced integration
    While rare, it is also possible for some internet-facing email systems to not be able to configure into BIS. However, since you say you had this email account previously working on your BB, this result would not be logical -- unless the email admins changed something on their side.
    I am curious about two of your responses though...those you talk about re-registering and creating a new account. One BB PIN can have only one BIS account at any given time (and only on one carrier at a time). So, unless your BIS account were first deleted, you would of course fail to be able to create a new one.
    It is also possible that perhaps you indeed are not providing the proper credentials when you configure...if there is a combination of numbers and symbols in your credentials, then you need to be especially careful when entering those, especially via the device interface. For instance, if your password is
    ab123
    and you enter
    a > b > ALT > 1 > 2 > 3
    the actual result will be
    ab1er
    You must enter
    a > b > ALT > 1 > ALT > 2 > ALT > 3
    in order to wind up with ab123. So, in this example, while on the BB keyboard you think you are typing ab123, you are actually typing ab1er.
    You may also need to take that risk of having a Vodafone rep attempt configuring this into your account for you.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Firefox android opens to about.config as home page. unable to set new home page

    firefox android always opens new tab or browser session on about:config page.
    I've restarted browser and tablet(Samsung Galaxy Tab 3), and this behavior still persists.
    All google searches suggest that the firefox android browser home page cannot be changed but this is obviously not true.
    I've tried solutions that suggest navigating to about:home and modifying bookmarks and these paths do not work.
    The awesome bar is far from awesome!!!!!!
    How do I stop the browser from starting at about:config and how can I make the home page be what I want?

    In the about:config page entry on the desktop there is a homepage entry, but does not show up on my android, odd.
    Try this > Settings > Customize > Home
    Change setting here and open a new tab to see if changes are made.
    Also check the about:addons page to see if you have any homepage add ons that has saved the about:config page as the home page.
    Looking forward to your reply!

  • Unable to set site permissions for AD group

    Hello,
    I have upgraded TFS from 2012 to 2013 Update 2 and using SharePoint SP1.
    The TFS server is installed in Domain A which has Trust to Domain B (domain B doesnt have trust to domain A). User account that the TFS runs under is from Domain B, also application pool in IIS runs under account from Domain B.
    Problem is that i cannot add domain groups from Domain A to the site permissions, i can add users but not the groups.
    The error i get when adding domain group from Domain A: "The user does not exist or is not unique"
    Does anybody have that or had this kind of problem?

    It is the Application Pool account making the query to retrieve the groups, so you would need to establish a trust from Domain B -> A.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Change site master page not working in team site

    For an intranet site I have a heavily customized master page but want to retain the default v4 master for admin pages. I haven't activated publishing for the site but can access changesitemasterpage.aspx and set the site and system master page.
    Action:
    Set site master to custom, set system master to v4
    Expected result:
    Exactly what the description says:
    "The system master page will be used by administrative pages, lists, and document library views on this site."
    Actual result:
    ALL pages use the v4 master.
    The only way to get the custom master to work is to change the system master setting to "custom".  But then the styling interferes with the functionality of the admin pages. Is this another case of SP not doing what it says it's going to do,
    or is it broken?

    Hi  ,
    For your issue, there are two approaches you can refer to:
    1.Activate publishing feature, set custom master page for “Site Master Page”. The site master page will be used by all publishing pages - the pages that visitors to your website will see.
    2.Go to  C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\LAYOUTS,  you can find all the application pages in the folder (such as settings.aspx) . Open the aspx page
    and find the dynamicMasterPage attribute at the page tag, change the value to default.master instead of custom.master. (not recommend)
    Reference:
    http://social.technet.microsoft.com/Forums/en-US/93611bbb-e9b1-4ec0-8011-5b6fbc4e8b2c/change-master-page-in-team-site-in-share-point-2010?forum=sharepointcustomizationprevious 
    http://msdn.microsoft.com/en-us/library/office/ee537530(v=office.14).aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Unable to set network time and date

    My Applet TV2 is unable to set the network time and date making it so I cannot login to my itunes account so not Netflix or anything making it pointless. I have tried adjusting my router settings (although I've used the same router for over and year and this just started randomly) I have ensured Port's 123 are open, I've restored the ATV2 4 times and have reset my router. I've seen links showing how to use SSh to set the time but I'm unsure if that will work. Any help is appreciated as I'm at a loss at this point

    Welcome to the Apple Community.
    Of the things I've seen work for people in the community you seem to have done most of them, but did you try these.
    Restart Apple TV by removing ALL the cables for a moment or two.
    Ensure that the DNS address's used by the Apple TV and the router are the same and are the address recommended by your ISP.

  • How to set the X-position and Y-position

    I started an application but was struck due to a problem.
    The problem was : I was unable to set the X-position and Y-position in the desired place... Any one who can help please help me to continue my application......
    I wanted to set my choice group elements in the center of the screen.. help me plz....

    You want to change to x/y position of what? The main frame?
    If it is the Frame class take a look into the CDC/PP specification:
    "An implementation may prohibit resizing of Frames by a user. In such a case, attempts to make any Frame resizable will fail silently"

  • ErrorStoreDP  (Unable to set attribute(s).)

    Hi,
    Im trying to deploy a aplication on the portal, with:
    /opt/SUNWps/bin/pdeploy deploy -u "uid=user,ou=people,o=jes" -w pass -p pass -d "o=jes" MercadoAccionario2.war;
    but when its is executing, throw the next message:
    errorStoreDP (Unable to set attribute(s).)
    and, i dont know what it mean,
    please, somebody helpme

    Hi :
    I managed to isolated the error via de pdeploy.debug log:
    </Provider>
    </Providers>
    </DisplayProfile>
    com.iplanet.am.sdk.AMException: Unable to set attribute(s).
    at com.sun.portal.desktop.context.DSAMEConnection.setTemplateAttribute(DSAMEConnection.java:1078)
    at com.sun.portal.desktop.context.DSAMEConnection.setAttributeByDN(DSAMEConnection.java:526)
    at com.sun.portal.desktop.context.DSAMEAdminDPContext.storeDPDocumentByDN(DSAMEAdminDPContext.java:205)
    at com.sun.portal.portlet.cli.PDDPUpdater.storeDPDocument(PDDPUpdater.java:236)
    at com.sun.portal.portlet.cli.PDDPUpdater.addProviders(PDDPUpdater.java:98)
    at com.sun.portal.portlet.cli.PDDeploy.process(PDDeploy.java:229)
    at com.sun.portal.portlet.cli.PortletDeployerCommand.runCommand(PortletDeployerCommand.java:209)
    at com.sun.portal.portlet.cli.PortletDeployerMain.main(PortletDeployerMain.java:60)
    com.iplanet.am.sdk.AMException: Unable to set attribute(s).
    at com.iplanet.am.sdk.ldap.DirectoryManager.processInternalException(DirectoryManager.java:433)
    at com.iplanet.am.sdk.ldap.DirectoryManager.setAttributes(DirectoryManager.java:2576)
    at com.iplanet.am.sdk.AMDirectoryManager.setAttributes(AMDirectoryManager.java:830)
    at com.iplanet.am.sdk.AMCacheManager.setAttributes(AMCacheManager.java:867)
    at com.iplanet.am.sdk.AMObjectImpl.store(AMObjectImpl.java:1753)
    at com.iplanet.am.sdk.AMObjectImpl.store(AMObjectImpl.java:1679)
    at com.sun.portal.desktop.context.DSAMEConnection.setTemplateAttribute(DSAMEConnection.java:1020)
    at com.sun.portal.desktop.context.DSAMEConnection.setAttributeByDN(DSAMEConnection.java:526)
    at com.sun.portal.desktop.context.DSAMEAdminDPContext.storeDPDocumentByDN(DSAMEAdminDPContext.java:205)
    at com.sun.portal.portlet.cli.PDDPUpdater.storeDPDocument(PDDPUpdater.java:236)
    at com.sun.portal.portlet.cli.PDDPUpdater.addProviders(PDDPUpdater.java:98)
    at com.sun.portal.portlet.cli.PDDeploy.process(PDDeploy.java:229)
    at com.sun.portal.portlet.cli.PortletDeployerCommand.runCommand(PortletDeployerCommand.java:209)
    at com.sun.portal.portlet.cli.PortletDeployerMain.main(PortletDeployerMain.java:60)
    It seems to show up when a war file has too many portlets, i believe its a display profile issue. Is the number of porlets a parameter?, any idea will be extremely useful, otherwise i would have to migrate to jboss or apache.
    Sabrewolf.

  • How to set custom master page for social/sites.aspx in sharepoint 2013

    How to set custom master page for social/sites.aspx in sharepoint 2013.?
    File path is
    C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\FEATURES\SocialDataStore\SocialDataStoreList\sites.aspx
    Thanks in advance

    Hi,
    You could open the sites.aspx in Notepad or SharePoint designer, and set the master page to your own master page directly via editing:
    <%@ Page language="C#" MasterPageFile="~masterurl/custom.master"      Inherits="Microsoft.SharePoint.Portal.WebControls.FollowedContentWebPartPage,Microsoft.SharePoint.Portal,Version=15.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c"
    %>
    Regards,
    Rebecca Tu
    TechNet Community Support

  • In the Options box, no matter what I set my Home Page to (Current Pages, Blank Page, Default) I am unable to change my homepage settings; they absolutely will not change and I can't figure it out.

    Up to about a month ago, I never had any problems setting my Home Page to Using Current Pages. Then, all of a sudden, I am unable to make any changes to my Home Page no matter what I change the settings to. I work for the US Forest Service and I don't know if some program was loaded that prohibits any changes from being made. Any help would be most appreciated.

    This link may help - https://support.mozilla.com/kb/Preferences+are+not+saved

  • I have been using Safari for years and have always kept it on "private." Starting two days ago, I suddenly found myself unable to log onto my blog and many other sites that I normally log onto when private is set. Why?

    I have been using Safari for years and have always kept it on "private." Starting two days ago, I suddenly found myself unable to log onto my blog and many other sites that I normally log onto when private is set. This so annoying, I just switched to Firefox. I don't like Firefox nearly as much as I like Safari. What is happening? How do I fix the problem?
    Thank you.

    Might be a corrupted database ...
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.

  • WVC54GCA Error: Unable to set system configuration

    I logged in as administrator into the WVC54GCA website.
    When I try to Disable theled, I get an error message popup box, saying "Error: Unable to set system configuration".
    This same message also appears when I try to enter a "Description" for the camera.
    Both of these settings are part of the Basic Setup of the camera'a web site.
    Does anyone know the solution to this problem?
    Thanks in advance,
    Ervarings Deskundige

    Try to use another computer,login into the Camera setup page and try to disable the LED operation..If that does not work then,reset the camera and re-configure it.

  • Unable to set columns under Layout Margins and Columns

    On certain pages in my 40 page document, I am unable to set the number of columns by using Layout>Margins and Columns. The columns option is dimmed out. I have tried to set them on a blank page and pages where columns were previously set (I can see the guides). I am using a single Master for page numbering and it is applied to every page in the document. There are pages where I can set the columns. I've done some page comparison and can't find the setting that might control this. Using InDesign CS6 on Windows. Thank you.

    Why are you not using multiple column text frames instead of 2 text frames with columns on the master page? This would give more flexiblity.

  • Service Desk Unable to set status to Customer Action and Proposed Solution

    Hi Everyone,
    We are unable to set a service desk issue to the status Customer Action or Proposed solution.
    I have someone create a new issue in the bakend system and when I receive the issue I assign it to myself as the processor. When I try to set teh status to Customer action it is grayed out.
    I have checked the following:
    1. As a test I assigned My user with sap_all profile so does not appear to be authroisation related
    2. The status profile has all six standard values (New, customer action, In Process, Sent to SAP, Proposed Solution, Confirmed).
    3. The transaction types have been defined using the standard profiles for Text Det. Procedure, Partnet Determination Procedure, Status Profile. The Partner Function ORG is set to Sold-To-Party , The date profile is a SRV_SLA_ITEM and the Action profile is set to SLFN0001_ADVANCED. The Org Data Prof is set to a customer defined one: ZSSC000000001.
    4. I have checked transaction ppoma_crm and the org structure and my user is assigned to a team lead position.
    Your assistance is greatly appreciated.
    Michael

    Hi Michael,
    please check your status profile for the "lowest status no." and "highest status no." values of the status values as Alex mentioned!
    You can find this in SPRO under "SAP Solution Manager> Scenario-Specific Settings>Service Desk>Service Desk>Status Profile".
    If the "high" value of the status "New" is lower than the status number of status "Customer Action" than you can not set the message from "New" to "Customer Action"!
    Hope this helps,
    Christoph

Maybe you are looking for