Unable to set the speed on dot11Radio Interface

Hello Experts,
I have number of 1130ag access points in our network. The problem i am facing is that when I tried to set the speed on the dot11Radio 0 and 1 interface it doesn't appear
This is the command I am using:
interface dot11Radio 0
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
Please can someone help me.

Hi,
The configurations that you are entering.. that is..
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
is the Default config for 802.11G and by nature the default configurationas will not appear in the running config.. another example is.. By default Aironet Extentions are enabled on the AP runing config, and in the Show run you will see that.. but when you isue the command no dot11 extension aironet thne this command wil show up!! please make the change and then you will be able to see.. here is the link as well which can be used to set the values..
http://www.cisco.com/en/US/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap6-radio.html#wp1101903
lemme know if this answered your question
Regards
Surendra

Similar Messages

Error deploying EJB on weblogic: Unable to set the transaction attribute

Hi,
I'm trying to deploy an application in WL10.3.2 and an error occurred during activation of changes.
Here is the error message from the log file:
<Jun 6, 2011 1:28:27 PM MDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'serverEAR-2' due to error weblogic.application.ModuleException: Exception preparing module: EJBModule(serverEJB-2.8.0.jar)
Unable to deploy EJB: C:\oracle\Middleware\user_projects\domains\base_domain\servers\Server_3\tmp\_WL_user\serverEAR-2\1zw7ao\serverEJB-2.8.0.jar from serverEJB-2.8.0.jar:
Unable to set the transaction attribute for method 'saveActionGroup(EditableActionGroup)' on EJB 'ViewBean'. No matching method could be found. Please verify the method signature specified in the ejb-jar.xml file matches that of your Remote interface for this EJB.
weblogic.application.ModuleException: Exception preparing module: EJBModule(serverEJB-2.8.0.jar)
Unable to deploy EJB: C:\oracle\Middleware\user_projects\domains\base_domain\servers\Server_3\tmp\_WL_user\serverEAR-2\1zw7ao\serverEJB-2.8.0.jar from serverEJB-2.8.0.jar:
Unable to set the transaction attribute for method 'saveActionGroup(EditableActionGroup)' on EJB 'ViewBean'. No matching method could be found. Please verify the method signature specified in the ejb-jar.xml file matches that of your Remote interface for this EJB.
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:391)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:59)
     Truncated. see log file for complete stacktrace
Caused By: weblogic.ejb.container.deployer.DeploymentDescriptorException: Unable to set the transaction attribute for method 'saveActionGroup(EditableActionGroup)' on EJB 'ViewBean'. No matching method could be found. Please verify the method signature specified in the ejb-jar.xml file matches that of your Remote interface for this EJB.
     at weblogic.ejb.container.deployer.MBeanDeploymentInfoImpl.processCTs(MBeanDeploymentInfoImpl.java:1502)
     at weblogic.ejb.container.deployer.MBeanDeploymentInfoImpl.processSpecificMethodCTs(MBeanDeploymentInfoImpl.java:1472)
     at weblogic.ejb.container.deployer.MBeanDeploymentInfoImpl.initializeTransactionAttribute(MBeanDeploymentInfoImpl.java:773)
     at weblogic.ejb.container.deployer.MBeanDeploymentInfoImpl.<init>(MBeanDeploymentInfoImpl.java:259)
     at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:1190)
     Truncated. see log file for complete stacktrace
Please help me...Thanks.

In your ejb-jar.xml you are referring to a method saveActionGroup(EditableActionGroup) which is not defined in your remote interface.
Maybe you have made some typo in the configuration. Check your transaction section, i.e.,
<container-transaction>
            <method>
                <ejb-name>ViewBean</ejb-name>
                <method-name>saveActionGroup</method-name>
                <method-params>
                    <method-param>package.EditableActionGroup</method-param>
                </method-params>
            </method>
            <trans-attribute>Required</trans-attribute>
</container-transaction>or something similar. See if the defined methods are corresponding to the methods defined in the remote interface.

Unable to set the selected value for a ADF LOV

Hi,
I am developing an application using jdeveloper 10.1.3 and Struts.
I have created a ADF LOV on my JSP Page as given below:
<html:select property="lob" onchange="javascript:selectLOB(this.form)">
<html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
</html:select>
When i submit the form, i am able to get the value of the selected Value in the List.
JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
Row r = (Row) listBinding.getSelectedValue();
String SoLob = (String) r.getAttribute("LobLob");
But i am unable to set the selected value back in the list when i return to the form again.
I tried the following:
int x = listBinding.getSelectedIndex();
listBinding.setSelectedIndex(x);
It would be really helpful if some one could let me know what needs to be done.
Thanks,
Subashini

Gyan,
I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
"Rendered" on the field so that based on search parameters we can hide result table column.
After searching online, I modified the controller code as follows
1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
3. Modified the controller code as follows :
        OAApplicationModule am = pageContext.getApplicationModule(webBean);
        OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
        OADBTransaction txn = am.getOADBTransaction();
        if (testvo != null)
          OARow row = (OARow)testvo.first();
            if (a.equalsIgnoreCase("Approved"))
                 row.setAttribute("Testrender", Boolean.FALSE);
            else
                 row.setAttribute("Testrender", Boolean.TRUE);
        } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
Its using only the value of one search parameter but not the second one .
The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
So can you please let me know how to proceed from here ?

Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
Jukka

Hi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." Any thoughts, Thank you.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.

Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

Sir, i set the speed dial in home page,but when i open the new tab its show only the blank page,can you say the ways to show the speed dials whenever i open tab

plz say the way to set the speed dials which i set in home page whenever i open the new tab instead of blank page

Make sure the new tab feature is enabled:
* On the address bar, go to '''about:config''' (Just be careful)
* Set '''browser.newtabpage.enabled''' to '''true'''
To set the homepage to show the new tab page:
* Go to Firefox Menu > Preferences > General
* Set '''When Firefox starts''' to '''Show my Home page'''
* Set '''Home Page''' to '''about:newtab'''
So that a new tab opens the new tab page
* On the address bar, go to '''about:config''' (Just be careful)
* Set '''browser.newtab.url''' to '''about:newtab'''

Unable to set the ip address for hosted network client after creating WIFI hotspot

Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
HI all
I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
but the problem I am facing is slight different
I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
as soon as I close the window, the ip address also disappears
when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
so what cause the failure in internet connectivity but success in hotspot connectivity?
check the screen shots...
can u help me..
its little complicated

Hi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support

Unable to set the colorIndex Property of the Interior Class

HI
Iam trying to Update the Accound Dim with New Property 'CostAcc" IN SAP BPC.
i entered the text and lenth of the property then i clicked on Modify The Dim Property. then its giving a warning message"Unable to set the colorIndex Property of the Interior Class"
BPC Experts pls send me a sollution
Thanks in advance
Regards
NarsiP
SAP BPC Consultant
OutLookSoft SA

Did you process your account dimension before to add you property?
Are you sure that your account dimension was working before to apply your modification?
Did you add just one property ore more properties?
Did you delete any existing properties?
Did you try to do modify account dimension without adding any porperties to see if that dimension is fine?
Regards
Sorin Radulescu

Error Deployer BEA-149231 Unable to set the activation state to true

Hi Friends ,
We are using weblogic 10.3.5.0, one of the deployment module is in failed status.
In the application logs we could see the following error
ERROR Util: Initial Spring Application Context creation failed: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'datasource' defined in class path resource [spring.xml]: Invocation of init method failed; nested exception is javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.cpt to perform lookup operation
in the weblogic server logs we could find the follow error
<24-Jan-2013 08:47:43 o'clock CET> <Warning> <HTTP> <BEA-101162> <User defined listener org.apache.myfaces.webapp.StartupServletContextListener failed: java.lang.ExceptionInInitializerError.java.lang.ExceptionInInitializerError
at com.db.cpt.biz.Utilities.Util.<clinit>(Util.java:114)
at com.db.cpt.web.listener.MyPhaseListener.<clinit>(MyPhaseListener.java:26)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
Truncated. see log file for complete stacktrace
Caused By: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'datasource' defined in class path resource [spring.xml]: Invocati
on of init method failed; nested exception is javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.cpt to perform lookup operation.
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1170)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:427)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:249)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:155)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:246)
Truncated. see log file for complete stacktrace
Caused By: javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.xxx to perform lookup operation.
at weblogic.jndi.internal.ServerNamingNode.checkPermission(ServerNamingNode.java:443)
at weblogic.jndi.internal.ServerNamingNode.checkLookup(ServerNamingNode.java:423)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:180)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<24-Jan-2013 08:47:43 o'clock CET> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'xxx'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.cpt to perform lookup operation.
at weblogic.jndi.internal.ServerNamingNode.checkPermission(ServerNamingNode.java:443)
at weblogic.jndi.internal.ServerNamingNode.checkLookup(ServerNamingNode.java:423)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:180)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
Can you please advise us how can we resolve this issue which with i am struggling
Raja

Kumar,
thanks for the update.
we fixed the issue,
for a particular user we didnt add his membership in a group in security realm, we added the user to a particular group, and then restarted weblogic, and deployed the module, and then status of deployment becomes successful.
Raja

Unable to set the default sending account in Mail?

I have three IMAP accounts set up in Mail and when I want to send an outgoing email can easily use the drop down to pick which account is used. The issue is I'd like to specify which of the three is used by default. I've searched on how to do this and the supposed answers are not working for me.
First, in Mail preferences, it's been posted you can drag the order of the accounts. That does not work for me at all, they are not draggable.
Second, in System Preferences there's been some talk of setting defaults in the Mail, Contacts & Calendars panel. When I try to access one of the accounts there it asks me for the password, I enter the correct one, and it fails saying unable to verify the password.
Can this be done at all? Is there a bug in System Preferences?
Thanks in advance!

Spinland,
Try this and see if it helps you....
this was posted by victoryhat in another discussion on Lion. This is what I have done and it worked for me.
http:/https://discussions.apple.com/message/18677085#18677085

Unable to set the image size interms of percentage

Hi Friends,
In my webdynpro application I am using IWDImage, I need to set the height and width of that image interms of percentage ratherthan pixels. I gave 50% for both height and width but I was not unable to get the image. While setting size of the image by number of pixels I am able to get the image.
Could you people please tell me why I am unable to get the image while setting the image size interms of percentage.
Thanks in advance,
Sandeep Kumar Bonam.

Hi sandeep,
I tried that by giving %, its working fine.
try once again...
how are u doing that....
otherwise u try with different heights and widths...

Unable to set custom speed to motion path on Camera

This is a followup question to "Controlling speed along motion paths"
(Many thanks to Mark Spencer and specialcase for the their excellent insights getting me this far =)
After experimenting with motion paths and realizing they were indeed what I was looking for, I set up my project so that the camera would follow specific paths along 2d images. Everything worked perfectly until I tried to modify the speed along which the camera travels along those paths.
In the motion path, in the speed drop down menu, I can select Constant, Ease in etc.... all the way to Custom, but they work slightly differently than I expected: while before (ie. applying motion curves to objects as opposed to the camera) I was able to getting a diagonal line in the Keyframe Editor where I could modify keyframes using bezier curves to adjust the speed, now, choosing the various speed options appears to change the "Transform.Position.X" and "Transform.Position.Y" curves directly.
When I select "Custom", "Motion path" and Custom Speed" appear in the keyframe menu above the Camera drop down, but its curve appears only as a dotted, completely horizontal line in the graphing window. The "Transform.Position.X" and "Transform.Position.Y" curves also revert to horizontal dotted lines. If I try to add curves to the custom speed line, the X and Y curves remain horizontal and the camera does not move.
Is there some reason I cannot get custom speeds for cameras without losing my motion path data?
Is there some way to work around this?
Thanks again for all of your help,
Tim

I'm not sure if there is some setting I have wrong:
When I try this, while I am able to set keyframes, the motion path data is reset. (ie. the Transform X and Transform Y curves reset to 0).
In the Keyframe Editor, I can make new curves for the X and Y values and for Timing, but the camera does not follow the motion path, it follows the new x and y curves. Trying to get those curves to match the motion path exactly is a large hassle.
This might help:
If I apply the motion path to an shape rather than to the camera, everything works perfectly (the object moves along the motion path, and I am able to set keyframes for the Custom Speed curve with no problems whatsoever). If I then copy the motion path directly from the shape and paste it to the camera layer, the path appears as a red curve (as it should), but the camera does not move.
Is there some way I can upload the motion file so that you can see what exactly is going on?
Thanks again,
Tim

I am unable to set the classpath from unix shell script

) I am new to java, provide me the solution to my problem, as it is urgent
I am unable to execute shell script on unix machine, the code is given below:
Basically it is not setting the classpath
dbUpload .java is astand alone java program to retrieve the report instance statistics from crystal server
Created a jar file from dbUpload.java as
Jar �cvf dbUpload.jar dbUpload.class
Here is mycode(script.sh)
CLASSPATH=/u01/CrystalList/cecore.jar:${CLASSPATH}:
CLASSPATH=${CLASSPATH}:/u01/CrystalList/cereports.jar:
CLASSPATH=${CLASSPATH}:/u01/CrystalList/dbUpload.jar:
Export CLASSPATH
Echo ${CLASSPATH}
Java dbUpload

venkat123,
if the code you posted is the original code of your script - it has some misspellings. Please try this one - it works for me both on solaris and linux.
#! /bin/bash
CLASSPATH=/u01/CrystalList/cecore.jar:$CLASSPATH
CLASSPATH=$CLASSPATH:/u01/CrystalList/cereports.jar
CLASSPATH=$CLASSPATH:/u01/CrystalList/dbUpload.jar
export CLASSPATH
echo $CLASSPATH
java dbUpload

Unable to set the Cursor focus on a particular field in OA Page

Hi,
I have a custom page with 3 controllers . Now when i delete a row from the Advance table, the focus of the cursor goes to the top of the page. My requirement is that, the focus should remain in the Advance table region itself.
I tried to set the focus using the below code. It dosent work. Could there be an issue since iam using more than one controller for the page?
OABodyBean bodyBean = (OABodyBean)pageContext.getRootWebBean();
bodyBean.setInitialFocusId("item164"); // item164 is the messageTextInput field in the Advance table region.
I tried to get the Initialfocus value after its set. The value shows as 'item164'. However , it doesnt focus on that item.
Please help me out in fixing this issue.
Thanks
AG

Hi,
Thanks for the Info. Can you help me with this java script or if you can provide me any reference it would be hepful.
Basically the focus has to stay in that particular AdvanceTable region where the row is deleted. Not required that the focus has to point to the next row after the delete.
Thanks
AG
Edited by: 928445 on Apr 26, 2012 12:06 AM

Unable to 'set the default source system' to Install Business Content

Hi,
Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
Could you please help me out?
Thank you.

Hi,
It seems to be a bug in version 3.5.
Do like this:
After you open the screen to <i>choose the dafault source system</i>
Clcik on 3rd button(F6) available in the bottom of the scrreen.
And then select teh tick mark for required system.
And then click on Continue button
You have do this step before you drop the cube to right side of the cube.
Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
Drag and drop required cube with dat flow before.
Now you can see the Transfer rules with selected Source system only in the collected Objects.
With rgds,
Anil Kumar Sharma .P

Unable to set the speed on dot11Radio Interface

Similar Messages

Maybe you are looking for