Unable to setup disk-based store for IWSSessionManager

Help me, please...
I was able to setup disk-based store for IWSSessionManager in my test environment using options in contexts.properties but in my production enviroment is not working at all...
Server is working (restarts) fine and accepted changed maximum number of sessions but I don't see any new session files created in SessionData dir - and I for sure should be able to see few dozens of them...
Any ides why or how can I troubleshoop the problem?
Server is iPlanet Webserver 6.0SP4.

I'll jump in with a similar issue.  If I try to access 192.168.1.1 on my brand new WRT54G I get "The address is not valid".  This is with firewall and antivirus switched off, the cable from the router to my DSL modem pulled (if it's plugged in I go right through the router and get the setup page on my DSL modem), and an address of 192.168.0.102 assigned automatically.
Any help would be appreciated so I can finish upping the security level on my home network.

Similar Messages

  • Unable to Connect to iTunes Store for Apple TV Purchases

    For the past 2 days I have been unable to make purchases from the iTunes store with Apple TV. I get the message "Unable to connect to iTunes Store. Temporarily unavailable. Try again later."  Despite this message, I have a valid internet connection and I can still connect to the iTunes store to preview movies and TV shows content with my Apple TV. I just cannot make any purchases. My Apple TV software is currently up to date and I have valid credit in my iTunes account.
    Apple support have suggested that I contact their support community to see if anyone can help me resolve this problem.

    Also having issue, it is ridiculous. Kinda defeats the purpose of having TV if you can't stream any content from iTunes since the change to no hard drive. Come on Apple, I think your better than this.
    I have read on a couple forums that they suspect Family Share as the issue, does everyone have Family Share on? I for one do.

  • Macbook pro6,2 unable to connect to app store for software update

    Purchased a used macbook pro6,2. When I ask the macbook to update software, the can't connect on app store page comes up. I can connect to iTunes.

    Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
    The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
    How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1. If you don't own another Mac
    a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    2. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    3. Partition and install OS X
    a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    c. An unusual problem may arise if all the following conditions apply:
              OS X 10.7 or later was installed by the previous owner
              The startup volume was encrypted with FileVault
              You're booted in Recovery mode (that is, not from a 10.6 installation disc)
    In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
    d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    4. Other issues
    a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • Unable to drag disk to destination for Restore in Disk Utility

    I am trying to restore from a disk image in Disk Utility. I dragged the image to the Source Box. When I drag the partition from an external firewire drive to the Destination box, it won't accept it. I have tried to do this with partitions on two separate external firewire drives. The partitions are 10GB. The image file is 6GB

    I had this problem just now. On the left side of your Disk Utility should be the partition/volume you want to use as your destination. Try dragging your destination partition/volume into the "Destination Disk" field. Worked for me.

  • I have been unable to access the App Store for two days. Anyone else experiencing this and what am I doing wrong?

    What am I doing wrong?

    Do you mean the "can't connect to the iTunes Store" message?
    Can't connect to the iTunes Store - Support - Apple
    Best Fixes for 'Cannot Connect to iTunes Store' Errors | iPad Insight

  • Unable to connect to itunes store for last 4 days

    My Itunes program has never given me any problems until Monday August 24th. I just bought an iphone and I wanted to get the newest update which is version 3. Itunes wouldnt let me update my iphone until I updated my itunes to version 8.2. Well it looked like all was going well as my phone was updated successfully to version 3 and it looked like my itunes was updated to 8.2.1.6 also. When I tried browsing the itunes store, I kept getting the error "Itunes could not connect to the itunes store". I am still getting this error. My computer has no problems getting to the internet so I know it is not my computer. I have looked at almost all relevant posts on here without success. I have uninstalled itunes and installed version 7 and that didnt work either.I would really appreciate any help anyone could give me.

    Here is my diagnostic report:
    Microsoft Windows Vista Business Edition Service Pack 1 (Build 6001)
    Dell Inc. Latitude D531
    iTunes 8.2.1.6
    QuickTime 7.6.2
    FairPlay 1.4.10
    iPod Updater Library 8.1d19
    CD Driver 2.1.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.5.2.2
    Apple Mobile Device Driver 1.43.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number 0A94F5ADF476D1A8
    Current user is an administrator.
    The current local date and time is 2009-08-28 16:54:05.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc., ATI Radeon X1270
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {94E14409-4596-4B20-A417-54BC807EAF28}
    Description: Dell Wireless 1395 WLAN Mini-Card
    IP Address: 192.168.1.9
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Fri Aug 28 16:14:43 2009
    Lease Expires: Sat Aug 29 16:14:43 2009
    DNS Servers: 192.168.1.1
    192.168.1.1
    Adapter Name: {A7AC4FC5-110F-49F2-9A87-E3C3C32D8A0F}
    Description: Broadcom NetXtreme 57xx Gigabit Controller
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Wed Dec 31 19:00:00 1969
    Lease Expires: Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Connection attempt to iTunes Store was unsuccessful.
    The network connection timed out.
    Secure connection attempt to iTunes Store was unsuccessful.
    The network connection timed out.
    Secure connection attempt to iPhone activation server unsuccessful.
    The network connection timed out.
    Last successful store access was 2009-08-24 19:12:55.
    ** CD/DVD Drive Tests **
    LowerFilters: Afc (1.0.0.2), PxHelp20 (2.0.0.0),
    UpperFilters: pwd_2k (7.2.0.16), GEARAspiWDM (2.1.0.1),
    D: HL-DT-ST DVD+RW GCA-4040N, Rev C108
    Drive is empty.
    Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off.
    ** iPod/iPhone Connectivity Tests **
    iPodService 8.2.1.6 is currently running.
    iTunesHelper 8.2.1.6 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Most Recent Device Not Currently Connected:
    iPod classic running firmware version 2.0.1
    Serial Number: 8K841V7N2C5
    iPhone 3G running firmware version 3.0
    Serial Number: 889297QCY7H
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.

  • Initial setup of triple store for use with Jena

    I have an instance of Oracle 11g that I want to use as the Persistent data layer for Jena. Can anyone point me to a good tutorial covering this?
    I'm quite confused as to whether there's anything on the database server itself I actually need to configure, or whether I can just go to town creating models directly via the Jena API.
    Thanks from an oracle noob,
    joe

    For 11g server, there is no need to configure anything special to the database to use Jena. (Of course, you need to do catsem11i.sql and then invoke sem_apis.create_sem_network...)
    On the client side, you do need to download Jena Adaptor 2.0 (see the following links)
    http://www.oracle.com/technology/tech/semantic_technologies/htdocs/documentation.html
    http://www.oracle.com/technology/software/tech/semantic_technologies/index.html
    After than, just include sdordfclient.jar in your classpath together with ojdbc5.jar and Jena
    libraries.
    The following readme has some code snippets.
    http://www.oracle.com/technology/tech/semantic_technologies/documentation/jenaadaptor2_readme.html
    Cheers,
    Zhe Wu

  • How to setup a release strategy for store generated purchase order

    Hi there,
    Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
    Greatly thank for your help.
    Kind Regards,
    2tea

    Please go thru the below Release Procedure and check whether you have maintained all the settings properly.
    PO RELEASE STRATEGY
    The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
    Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
    e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
    CT04 - Create Characteristic e.g. NETVALUE
    Click Additional data Table name CEKKO Field name GNETW and press enter
    (for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
    In the Basic data (X refers to tick),
    X Mutliple values
    X Interval values
    In the Value data, in the Char. value column, type >10000 and press enter
    Save your data
    CL02 - Class
    Class - Create REL_PUR
    Class type - 032
    Click Create
    Description - Release Procedure for Purchase Order
    In the Same Classification section, click Check with error
    In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
    OMGS - Define Release Procedure for Purchase Order Type
    Release Group - New entries
    Rel.group Rel. Object Class Description
    02 REL_PUR Rel. Strategy for PO
    Release codes - New entries
    Grp Code
    02 01
    Release indicators
    Release indicators Release Description
    0 Blocked
    1 X Release
    Release Strategy
    Release group 02
    Rel.strategy 01
    Release codes 01
    Release status 01
    Classification Choose your check values
    OMGSCK - Check Release Strategies
    (make sure there are no error messages)
    Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
    Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
    In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
    The person with the release authorization have to use ME28 to release the Purchase Order.
    Regards,
    Ashok

  • I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • HT3606 how do i get a recovery disk or download for os 10.5.8?  my system was installed by an apple store when replacing my hard drive.  i did not get a backup disk.

    how do i get a recovery disk or download for os 10.5.8?  my system was installed by an apple store when replacing my hard drive.  i did not get a backup disk.  macbook is a 1.1 from mid 2006 and 10.5.8 is as far as i can go..  use this as a utility backup when my new macbook pro with mt lion screws something up---which seems like a daily event. do i have to install a lesser version of leopard then install the update.  does software update even work anymore for leopard?  im so in the dark and when i look at the console i just freak.

    Hello, your best bet would be to clone your drive to an external drive, which will be bootable.
    Get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/
    You're not likely to see any updates show up for 10.5.x
    The very first MacBook 1,1s can actually run 10.6, which is updatable to 10.6.8, but will only run in 32 bit mode on yours.
    http://www.everymac.com/systems/apple/macbook/specs/macbook_1.83.html
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
    Other countries...
    http://support.apple.com/kb/HE57

  • I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

    I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

    Apple's response to my email:
    "I understand that you can't update your apps using your iPad.
    Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available.
    Thank you for your patience. Apple wants your iTunes experience to be as enjoyable as possible. Have a great day!"

  • HT3702 I purchased a book called Activity-based costing for $3.99. I tried to open the file but it said my computer does not have IOS. I have a smartphone and I am unable to view the book. I am requesting since I am unable to use the book activity-base co

    I purchased a book called Activity-based costing for $3.99. I tried to open the file but it said my computer does not have IOS. I have a smartphone and I am unable to view the book. I am requesting since I am unable to use the book activity-base costing, a refund.
    Kevin

    I don't know what you are saying. How do I get my money refunded.

  • I am not getting the verification e mail, for my apple id and unable to use the apple store

    Hi There,
    I am uable to get the verification e mail for my apple id and unable to use the apple store.
    Regards,
    Ameera

    G to appleid.apple.com and then to manage ID and see if you can get the ID working there

  • I have setup and iPad mini for my mother with her own iCloud account. I have shared a photo album that has downloaded, but I am unable to view any pictures

    I have setup and iPad mini for my mother with her own iCloud account. I have shared a photo album that has downloaded, but I am unable to view any pictures. What do I do?

    I assume you mean on her iPad. Have you tried connecting on another network.

  • Is the App Store for iPhone down?  "unable to connect to store" all day.  :(

    Unable to connect to App Store from iPhone most of the day. 

    Thank you Ocean20.  Mine just says "loading" for approximately 3 minutes, then goes to "unable to connect..."

Maybe you are looking for