Unable to start Print Service
I think am facing the same situation as in this old forum post:
Error(1042006) Network error [10048]: Unable to connect
I tried to increase the Heap size of print Server (HyS9FRPrint) in registry to Xmx - 2048 MB and Xmx 2048 MB. After this I'm not able to start the PRINT SERVICE.
PATH: HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\Hyperion Reports\HyS9FRPrint: Xmx2048m and Xms2048m.
When I modify the Heap setting to Xmx1538m and Xms1024m, I'm able to start the print service.
Messages recorded in the EVENT viewer is copied below:
======================================================================================================================
The description for Event ID ( 0 ) in Source ( HyS9FRPrint ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Could not initialize the Java Virtual Machine..
======================================================================================================================
Could you please let me know if I have missed any thing in increasing the heap size tp 2048mb. Is there any particular steps for the same?
Thanks,
Vinay.
It is 32bit windows process so maximum you will provably get it to set the JVM to around 1.6GB which you have already found, setting it any bigger and it wont start.
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
Unable to start presentation services , in OBIEE 11g
Hi ,
Unable to start presentation services , in OBIEE 11g :
[2013-01-18T13:38:49.000+05:30] [OBIPS] [INCIDENT_ERROR:1] [] [saw.webextensionbase.init] [ecid: ] [tid: ] Invalid item /system/mktgcache/01HW447397/sawguidstate.[[
File:catalogimpl.cpp
Line:660
Location:
saw.webextensionbase.init
saw.sawserver
saw.sawserver.initializesawserver
saw.sawserverFollow the steps below:
1.Shutdown all OBIEE services.
2.Replace the files sawguidstate and sawguidstate.atrin the location:
<Instance_Home>\instances\<instance_name>\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\<project>\root\system\mktgcache\<name>
with the same files from a backup or from another working instance.
3.Restart all OBIEE services. -
Unable to start print job. Is printer availble? CS3 loaded on Windows 7 64bit
Hello to everyone:
I have a network of PC's. As part of their basic install I load on CS3. I have started to incorporate Windows 7 and found the following problem on all of them but not on any of the XP's.
When my users try to print from Acrobat 8 they receive the following message: "Unable to start print job. I there a printer?".
This happens when they try to print to only one of our printers, the HP designjet 1055. I have both 32bit and 64bit drivers installed on our print server.
I did read a post somewhere that the common files in program files might be playing up because there are 2 program files location on windows 7 - but I didn't get any further on that one.
I'm sure there's a work around for this issue, there has been for the 101 others.
Does anyone have any ideas?Yes, we have AA8 here that comes with CS3 and for the most part it seem to be working fine. Sure I've had the odd compatibility glitch with getting the 32 app to work on win7 64 but I am stumped with this one printer. I have 7 other normal network printers (not large format) and I can print to those through AA8 fine.
If windows can see the HP printer and other apps can print to the HP printer but AA8 can't and at the same time AA8 can see and print to all the other printers it makes me think that this is ether a driver compatibility issue or some programmatic issue. Perhaps I need to point something in the registry to something else? -
Unable to start ifs service after database is restarted
Hi All,
I am getting this weird problem with iFS. I have web application where I connect to iFS to read some of the documents. The problem is when the database is stopped and started with App server still running (ifs is also up and running)... I am getting the following error message.
Any help will be greatly appreciated. I have also attached the java class which I am using to get connection...
oracle.ifs.common.IfsException: IFS-21008: Unable to connect to iFS service
oracle.ifs.common.IfsException: IFS-11013: Unable to start inter-service event exchanger
java.sql.SQLException: No more data to read from socket
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:857)
at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:731)
at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:690)
at oracle.jdbc.ttc7.Oopen.receive(Oopen.java:103)
at oracle.jdbc.ttc7.TTC7Protocol.open(TTC7Protocol.java:466)
at oracle.jdbc.driver.OracleStatement.<init>(OracleStatement.java:413)
at oracle.jdbc.driver.OracleConnection.privateCreateStatement(OracleConnection.java:470)
at oracle.jdbc.driver.OracleConnection.createStatement(OracleConnection.java:379)
at oracle.ifs.server.S_LibraryServiceRdbmsEventExchanger.start(S_LibraryServiceRdbmsEventExchanger.java:243)
at oracle.ifs.server.S_LibraryService.addSession(S_LibraryService.java:2695)
at oracle.ifs.server.S_LibrarySession.<init>(S_LibrarySession.java:1961)
at java.lang.reflect.Constructor.newInstance(Native Method)
at oracle.ifs.server.S_LibraryService.constructSession(S_LibraryService.java:2566)
at oracle.ifs.server.S_LibraryService.connect(S_LibraryService.java:2359)
at oracle.ifs.beans.LibraryService.connect(LibraryService.java:977)
at com.comp.test.utils.iFSSession.getIfsConnection(iFSSession.java:73)
at com.comp.test.controller.ReportRequestAction.processRequest(ReportRequestAction.java:95)
at com.comp.test.controller.ReportRequestAction.execute(ReportRequestAction.java:64)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
--java code
if(!LibraryService.isServiceStarted(serviceName)) {
service = LibraryService.startService(serviceName,servicepasswd);
} else {
service = LibraryService.findService(serviceName);
//CredentialManager to authenticate a user
CleartextCredential cred = new CleartextCredential(name, password);
ConnectOptions connectOpt = new ConnectOptions();
//Sets and gets the Locale of the new session.
connectOpt.setLocale(Locale.getDefault());
//Connects to iFS, establishing a new LibrarySession
ifsSession = service.connect(cred, connectOpt);
//Set the administrator mode state for this session
ifsSession.setAdministrationMode(true);
return ifsSession;I am using the following class to get ifs session from IfsHttpLogin
public class TestIfsSession implements IfsHttpLogin {
* The <code>LibrarySession</code>.
private LibrarySession m_session;
* The <code>FolderPathResolver</code>.
private FolderPathResolver m_resolver;
* Default constructor required by the jsp spec for the USEBEAN tag
* @exception IfsException
public TestIfsSession() throws IfsException {
public void init(LibrarySession libSession)
this.m_session = libSession;
* Return the login's session object.
* @return The <code>LibrarySession</code> object.
public LibrarySession getSession() {
return m_session;
* Return the login's path resolver.
* @return The <code>FolderPathResolver</code> object.
public FolderPathResolver getResolver() {
return m_resolver;
* Called when this object is bound to the HTTP session object.
* @param event
* The event when the object is bound to the Http session.
public void valueBound(HttpSessionBindingEvent event) {
// do nothing
m_category.debug("value bound : ");
* Called when this object is unbound from the HTTP session object.
* @param event
* The event when the object is unbound to the Http session.
public void valueUnbound(HttpSessionBindingEvent event) {
m_resolver = null;
try {
if (m_session != null) {
m_category.debug("removing connection: valueUnbound " + m_session);
m_session.disconnect();
} catch (IfsException e) {
e.printStackTrace();
} finally {
m_session = null; // release the resources
System.gc(); -
[SOLVED] Network Configuration -- unable to start a service file
I am following this wiki page (Using Static IP address step) and created /etc/systemd/system/network.service as instructed
[Unit]
Description=Connect to the other pc
Wants=network.target
Before=network.target
BindsTo=sys-subsystem-net-devices-lan.device
After=sys-subsystem-net-devices-lan.device
[Service]
Type=oneshot
RemainAfterExit=yes
EnvironmentFile=/etc/conf.d/network
ExecStart=/sbin/ip link set dev lan up
ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan
ExecStart=/sbin/ip route add default via 192.168.1.1
ExecStop=/sbin/ip addr flush dev lan
ExecStop=/sbin/ip link set dev lan down
[Install]
WantedBy=multi-user.target
But I am unable to start network.service
$ sudo systemctl start network
Job for network.service failed. See 'systemctl status network.service' and 'journalctl -xn' for details.
$ systemctl status network.service
network.service - Connect to voice
Loaded: loaded (/etc/systemd/system/network.service; enabled)
Active: failed (Result: resources)
$ sudo journalctl -xn
-- Logs begin at Sat 2013-03-30 03:48:02 AMT, end at Thu 2013-04-04 18:17:46 AMT. --
Apr 04 18:17:26 work sudo[24774]: pam_unix(sudo:session): session closed for user root
Apr 04 18:17:44 work sudo[25354]: void : TTY=pts/0 ; PWD=/etc/systemd/system ; USER=root ; COMMAND=/usr/bin/systemctl start network
Apr 04 18:17:44 work sudo[25354]: pam_unix(sudo:session): session opened for user root by void(uid=0)
Apr 04 18:17:44 work systemd[1]: Starting Connect to the other pc...
-- Subject: Unit network.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/7d4958e842da4a758f6c1cdc7b36dcc5
-- Unit network.service has begun starting up.
Apr 04 18:17:44 work systemd[1]: Failed to load environment files: No such file or directory
Apr 04 18:17:44 work systemd[1]: network.service failed to run 'start' task: No such file or directory
Apr 04 18:17:44 work systemd[1]: Failed to start Connect to the other pc.
-- Subject: Unit network.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
-- Unit network.service has failed.
-- The result is failed.
Apr 04 18:17:44 work sudo[25354]: pam_unix(sudo:session): session closed for user root
Apr 04 18:17:46 work sudo[25421]: void : TTY=pts/0 ; PWD=/etc/systemd/system ; USER=root ; COMMAND=/usr/bin/journalctl -xn
Apr 04 18:17:46 work sudo[25421]: pam_unix(sudo:session): session opened for user root by void(uid=0)
Additional info:
I have connected 2 PCs with LAN (Ethernet) cable and want configure them for exchanging files. Both running Arch Linux. I am following the Network Configuration wiki page from the beginning. Didn't have luck with DHCP/dynamic IP, so trying Static IP this time. Restarting the pc with network.service enabled results in same error (in systemctl --failed). Same error message on both PCs.
Trying to run ExecStart lines one by one:
$ sudo /sbin/ip link set dev lan up
$ sudo /sbin/ip addr add 192.168.1.2/24 dev lan
RTNETLINK answers: File exists
$ sudo /sbin/ip route add default via 192.168.1.1
RTNETLINK answers: File exists
Does this mean there already is IP address and route assigned? If so, how to find out which service has done that? Do I need to remove it? Am I following the right wiki page (didn't find another)?
What am I doing wrong and how can I correct this error? / Point me in right direction.
Last edited by axper (2013-04-04 19:26:17)henk wrote:
EnvironmentFile=/etc/conf.d/network
Apr 04 18:17:44 work systemd[1]: Failed to load environment files: No such file or directory
have you checked if the network file exists?
Oh thanks, that line was causing problems! Now I do have network.service(s) running on both PC's with this content:
[Unit]
Description=Connect to my desktop/laptop
Wants=network.target
Before=network.target
BindsTo=sys-subsystem-net-devices-lan.device
After=sys-subsystem-net-devices-lan.device
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/sbin/ip link set dev lan up
ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan
ExecStart=/sbin/ip route add default via 192.168.1.1
ExecStop=/sbin/ip addr flush dev lan
ExecStop=/sbin/ip link set dev lan down
[Install]
WantedBy=multi-user.target
I don't get any errors, and this is network's status (on both PCs) when cable is connected
$ sudo systemctl restart network
$ systemctl status network
network.service - Connect to my desktop
Loaded: loaded (/etc/systemd/system/network.service; disabled)
Active: active (exited) since Thu 2013-04-04 22:43:22 AMT; 8s ago
Process: 9761 ExecStop=/sbin/ip link set dev lan down (code=exited, status=0/SUCCESS)
Process: 9757 ExecStop=/sbin/ip addr flush dev lan (code=exited, status=0/SUCCESS)
Process: 9768 ExecStart=/sbin/ip route add default via 192.168.1.1 (code=exited, status=0/SUCCESS)
Process: 9766 ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan (code=exited, status=0/SUCCESS)
Process: 9764 ExecStart=/sbin/ip link set dev lan up (code=exited, status=0/SUCCESS)
And here wiki page is no more help. How can I test connection?
I try to ping, and it works on both machines (if it's the right thing to test?)
$ ping -c3 192.168.1.2
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=0.039 ms
64 bytes from 192.168.1.2: icmp_seq=2 ttl=64 time=0.050 ms
64 bytes from 192.168.1.2: icmp_seq=3 ttl=64 time=0.060 ms
--- 192.168.1.2 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1998ms
rtt min/avg/max/mdev = 0.039/0.049/0.060/0.011 ms
Now I need to figure out how to share files. Thanks all.
Last edited by axper (2013-04-04 19:04:43) -
Unable to start a service execution
While uninstalling NW7.02 i came across with an error (while selecting continue with run a new option) of
unable to start a service execution.
Please check the following information for the possible reason and inform the installation development.Hi Vidushi,
Remove all the sapinst exe file and sapinst_dir.
kill all the process of sapinst.
set the new TEMP variable and start the sapinst.
With Regards
Ashutosh Chaturvedi -
No eprint icon on my printer /unable to start web services
I have a HP officejet 65001 plus special edition. windows 7 64 bit. I do not have a eprint icon on my printer nor am I able to start web services. Message unable to complete update. Just prints out a page as follows:Connect h10141.www1.hp.com:80 HRRP/1.0 Proxy authorization: Basic Og==. Please help me. I have updated firmware. Powered off/on. Have spent numerous hours trying to get this to work!!!! Yhank you
Hi karenames50,
I apologize for the inconvenience of this error message, I just have a couple of questions to confirm some information.
How did you update the firmware?
Can you confirm the printer firmware is this version?: CIP1FN1126AR
( You can find this information by printing a printer status report, under Setup(Tool icon)>Reports>Printer Status Report
If that is the current firmware version they you can try to power down both the printer and the router. Then power on the router, let it come fully online, then power on the printer. Once all devices are fully powered on try activating web services again.
Please let me know the result.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
Hi,
I have completed installation of Oracle Clusterware 10.2.0.1 on Linux X86, RHEL 4 (using OCFS2). This is a two node system.
After running a few tests we had some disk corruption on the shared storage system and hence we had to reformat the shared filesystem (only the shared FS not the local filesystems on the nodes). I copied the backup OCR and VDISK files into their original directories after the formating, and moved the mirror backups into their original directory. But I am unable to start the cluster services, I have tried the following
$./crsctl start crs
Attempting to start CRS stack
The CRS stack will be started shortly
$
Didn't work, no services started up.
I then tried the following command
$ ./init.crs start
Startup will be queued to init within 90 seconds.
But again I don't see the crs daemons up and running.
I don't see anything in the logs (crsd, css, evmd etc) the last lines there were before we shutdown everything and then formated the shared storage.
If anyone has come across a similar issue then please advice on possible errors I could look for or how to work around this to get the crs services started so that I can install the database software. Any help/advice will be appreciated
Thanks.Hi,
since you mention the reformatting of the shared disks:
Check /var/log/messages for things like
"Cluster Ready Services waiting on dependencies. Diagnostics in /tmp/crsctl.xxxx",
best use cat /var/log/message | grep crsctl.
After that the mentioned /tmp/crsctl.xxxx file.
You might find Oracle Error PROC-0026 there:
"Error while accessing the physical storage".
What is meant is the OCR.
Check if user/group of the raw devices is still oracle:oinstall, it might have changed to root:disk by reformatting.
I myself had this case unexpectedly now some times even WITHOUT any reformatting, I suspect that touching the raw devices with Linux LVM might change ownership.
regards
Robert -
hai,
i was instlled 12.0.4 on RHEL AS 4.0 32 bit operating system. everything is working fine. after some days unexpectullay IPADREss of server was changed.
know the apps services i was unable to start. can u tell me we need to chane in any files this ipadrress????You just need to change the IP address in the etc file and bounce the services. If this does not help, then run AutoConfig on the database and the application tiers.
-
Unable to start Presentation Services- Windows 7
Hi,
I'm unable to start the Presentation Services , when i do so i am getting a message "Internet Explorer cannot display the webpage"
Windows 7 ultimate.
All services started like BI server, BI Presentation and Java Host
Installation were successful, able to open Repository.
BI Publisher is also getting started.
I need to look into the Answers, unable to start the Presentation Services, any help is very much appreciated !
ThanksHi,
Can you past it sawlog0.log message also Make sure below points (just double check and test it)
1) Check your instanceconfig.XML file (better if u have back up plz restore it then change it u r current catalog)
2) In the RPD, go to Manage -> Variables. Look through your initialization blocks and see if any are being used to set the USER variable.
3) make sure if have LDAP settup (external table via init blog)
4) if you can back of your RPD,Catalog restore it then try to access it (for testing) if its works then u r current issue catalog may be corrupted webcat
if your providing sawlog0.log ..it will be easy to find the issues
Thanks
Deva -
Hi group,
I have applied patch 12.1.2 and followed some steps to configure SOA Gateway and after that I am unable to start Apache Server.
I have enabled "debug" option in opmn.xml file as follow:
<debug path="F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\logs\ora\10.1.3\opmn\opmn.dbg" comp="internal;ons;pm" rotation-size="1500000" rotation-hour="0" />
But nothing is created in opmn.dbg file.
Service is started in Windows, but when I try to query it, it displays as follow:
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd start
Thu 05/13/2010 01:15 PM
Starting Oracle Process Manager (OPMN) ...
CALL F:\ORAEBS_APPS\apps\tech_st\10.1.3\opmn\bin\opmnctl.exe start
Service is already running
opmnctl: opmn already running
STATE : 4 RUNNING
exiting with status 0
ERRORCODE = 0 ERRORCODE_END
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd status
Thu 05/13/2010 01:15 PM
Checking status of OPMN managed processes...
Unable to connect to opmn.
Opmn may not be up.
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
Any advice or help will be really appreciated.
Thanks in advance.
Kind regards,
Francisco Mtz. OviedoHussein,
I don't get any error when I stop and start using Services Windows.
You know, file opmn.dbg is empty and there is no file opmn.log at F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\logs\ora\10.1.3\opmn
I am able to run AutoConfig without any problem.
This is what I am getting when I try to use command mode:
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adapcctl.cmd start
Thu 05/13/2010 01:33 PM
Unable to connect to opmn.
Opmn may not be up.
Oracle Process Manager Deamon (OPMN) is not running
exiting with status 1
ERRORCODE = 1 ERRORCODE_END
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adapcctl.cmd status
Thu 05/13/2010 01:34 PM
Checking status of OPMN managed processes...
Unable to connect to opmn.
Opmn may not be up.
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd status
Thu 05/13/2010 01:34 PM
Checking status of OPMN managed processes...
Unable to connect to opmn.
Opmn may not be up.
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd start
Thu 05/13/2010 01:34 PM
Starting Oracle Process Manager (OPMN) ...
CALL F:\ORAEBS_APPS\apps\tech_st\10.1.3\opmn\bin\opmnctl.exe start
Service is already running
opmnctl: opmn already running
STATE : 4 RUNNING
exiting with status 0
ERRORCODE = 0 ERRORCODE_END
Thanks in advance.
Kind regards,
Francisco Mtz. Oviedo -
Unable to Start Presentation service
Hi All,
I am unable to start the presentation service. The logs shows following error message. Could you please guide me
racle BI Presentation Services 10.1.3.4.1 (Build 090414.1900) are starting up.
Type: Error
Severity: 20
Time: Sun Jul 03 20:11:39 2011
File: project/webodbcaccess/odbcenvironment.cpp Line: 98
Properties: ThreadID-2308
Location:
saw.webextensionbase.staticinit
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
ODBC driver preload failed. ODBC library name: 'nqsodbc.dll'
Type: Error
Severity: 20
Time: Sun Jul 03 20:11:39 2011
File: project/webodbcaccess/odbcenvironment.cpp Line: 100
Properties: ThreadID-2308
Location:
saw.webextensionbase.staticinit
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
The specified module could not be found.
Type: Error
Severity: 42
Time: Sun Jul 03 20:11:39 2011
File: project/webodbcaccess/odbcenvironment.cpp Line: 195
Properties: ThreadID-2308
Location:
saw.webextensionbase.staticinit
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
Allocation of SQLEnvironment failed (SQLError: -1). Please ensure that the odbc driver is in your environment path.
Type: Error
Severity: 20
Time: Sun Jul 03 20:11:39 2011
File: project/sawserver/winmain.cpp Line: 74
Properties: ThreadID-2308
Location:
saw.sawserver.initializesawserver
saw.threads
Allocation of SQLEnvironment failed (SQLError: -1). Please ensure that the odbc driver is in your environment path.
Type: Error
Severity: 30
Time: Sun Jul 03 20:11:39 2011
File: project/webcomm/rpcserver.cpp Line: 145
Properties:
Location:
saw.unknown
Assertion failure: m_pImpl != 0 at line 145 of ./project/webcomm/rpcserver.cpp
Type: Information
Severity: 30
Time: Sun Jul 03 20:43:45 2011
File: project/sawserver/sawserver.cpp Line: 386
Properties: ThreadID-2752
Location:
saw.sawserver
saw.sawserver.initializesawserver
saw.threadsHi Andy,
First of all,rpd should be in synchronization with the database in order to get the data.
So,you need to create ODBC as in the earlier reply.
than you need to give the details of odbc in connection pool of rpd.
than test the connection by rightclick on table in physical layer and click update row count option if your table gets updated then you will make sure that your rpd is in sync with database.
If you want any instance help you can call me at any time to +919701233345.
Assign points if your problem solved or make it helpful if it helps you.Since,it is encouraging.
Regards,
Lakshmipathi. -
Unable to start MYSQL service on Mac Mini
Trying to installed JAMF software on Mac Mini server. One of the configuration steps required setting up a database from the terminal but it requires the MYSQL service to be running and I'm unable to get this service to start. Any ideas or suggestions?
MikeWhat happens when you try to start it? Any messages shown in the logs?
-
Unable to start "Printer Assistant" Officejet Pro 8600
Printer Assistant and my 8600 have worked well for over a year. Now I can't start "Printer Assistant". This may have been triggered by an update to Win 8.1. Others on the Discussion Board have been told to uninstall all HP programs, reboot, and then download the "full feature" package from the HP site.
I've done all that. Installation works fine. Print, fax, and scan all work fine when tested. A shortcut was installed on the desktop. But I cannot start the "Printer Assistant" either from the desk top, the start button, or from the program file.
I used Trouble Shooter to try and find the problem. From the trouble shooter I was able to open "HP Scan - HP Officejet Pro 8600". From there I could initiate a successful scan. But the only route to this page that I have found is through the Trouble Shooter.
Printer Assistant is loaded on my computer: File Ver 28.0.1315.0; 5.16MB; Date Modified 10/17/12.
Got any ideas?
This question was solved.
View Solution.Hi Sticks10,
Thank you for your response, I appreciate the clarification. I still think the patch is a good idea to try.
If it still does not work, try the following in this order:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Turn Windows Defender on or off. (This will work in Windows 8.1).
Disable any firewalls. Turn Windows Firewall on or off. (This will work in Windows 8.1).
Create a new user account. Create a user account.
Re-install the software using the HP Printer Install Wizard for Windows.
Hope this works for you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Unable to start subscription service for Adobe Photoshop CS5
Hi there.
I'm trying to install Adobe Photoshop CS5 on my laptop and every time, after installing the product and entering the serial number, the process fails and tells me 'We are unable to start your subscription for Adobe Photoshop CS5 Subscription Edition.'
It then asks me to relaunch the product and do the installation process again. I have tried this numerous times and it keeps saying the same thing.
Please help!Best contact Adobe Customer Support; start from http://helpx.adobe.com/contact.html
[topic moved to Downloading, Installing, Setting Up forum]
Maybe you are looking for
-
How to view one photo with one XMP based adjustment side by side with another XMP version?
Hi, I was wondering if there is a simple way of quickly and easily comparing side by side the same photo that may have different adjustments made to it. I do some freelance work where in one job I receive up to 800 images to edit. After my work is c
-
Question about returning Apple products
I'm looking to buy a Macbook Pro from Amazon.com. Can I exchange it at an Apple retail store if there's something wrong with it? Thanks
-
We use a SQUID proxy server in our company network. For ensuring legal compliance we use proxy user authentication. Configuring our IOS 6.1.2 devices for our wireless networks does not work in any of the possible ways: - no Proxy doesn't work - as ex
-
Missing parent object when using FXML - cannot manipulate other content
Hi, today I was playing around with FXML and embedded it into a custom made "Dialog" class (an abstract class to provide some basic stuff, like add OK/Cancel Button, handle result type and so on programmatically). Basically I've created an implementa
-
Re: Second fan won't run on GE62 2QD Apache Pro?
Quote from: eeshayus on Today at 13:07:26But when I am using it, say playing Smite with Nvidia graphics on, I don't feel the exhaust like how I feel with the first fan. Since fan 2 is for GPU the fan reac...