Unable to start X on dell inspiron 6400
Hello Guys,
I'm new to Arch, been using Linux for the last couple of years. But finding it hard to getting X to start.
.xinitrc - http://paste.pocoo.org/show/214610
xorg.conf - http://paste.pocoo.org/show/214611
xorg.0.log - http://paste.pocoo.org/show/214612
xorf.0.log.old - http://paste.pocoo.org/show/214613
I get the error message, error setting MTRR inappropriate icotl for device.
I hope this is enough information to help me fix the issue.
Thanks!
Last edited by nperry (2010-05-16 14:45:43)
nperry wrote:
Tried without Xorg, it fails to.
The graphic card in the laptop is ATI Mobility x1300
I have a laptop with an ATI Radeon HD 5730 and had a lot of trouble to get it working.
I suggest you start by reading the wiki at:
http://wiki.archlinux.org/index.php/Ati
Mektub
Similar Messages
-
Problem facing installing Solaris 10 on Dell inspiron 6400.
Hi,
I am facing problem in installing Solaris 10 on my Dell inspiron 6400.
It is giving "cannot find driver for screen device /isa/motherboard@1,61" error.
Please help...
Thanks In Advance
SaurabhHi all,
I've also the same problem, I tried the 11/06 but after GRUB , it hangs. HereBelow the HCL.
No Solaris Driver
No Solaris Driver
Multimedia
Intel Corporation
82801G (ICH7 Family) High Definition Audio Controller
No Solaris Driver
No Solaris Driver
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
Solaris 10 11/06
Solaris 10 11/06
Firewire
Ricoh Co Ltd
Unknown device
hci1394
Note-1
Note-1
Network
Broadcom Corporation
BCM4401-B0 100Base-TX
bfe
Solaris 10 11/06
Solaris 10 11/06
Video
Intel Corporation
Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
vgatext
Solaris 10 11/06
Solaris 10 11/06
Storage
Intel Corporation
82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE
pci-ide
Solaris 10 11/06
Solaris 10 11/06
USB
Intel Corporation
82801G (ICH7 Family) USB UHCI #1
uhci
Solaris 10 11/06
Solaris 10 11/06
USB
Intel Corporation
82801G (ICH7 Family) USB UHCI #2
uhci
Solaris 10 11/06
Solaris 10 11/06
USB
Intel Corporation
82801G (ICH7 Family) USB UHCI #3
uhci
Solaris 10 11/06
Solaris 10 11/06
USB
Intel Corporation
82801G (ICH7 Family) USB UHCI #4
uhci
Solaris 10 11/06
Solaris 10 11/06
USB
Intel Corporation
82801G (ICH7 Family) USB2 EHCI Controller
ehci -
How do I wake up Dell Inspiron 6400 after closing the lid? [SOLVED]
I'm running Arch on a Dell Inspiron 6400 laptop (same as Inspiron e1505). When I close the top to an angle of less than about 30 degrees, the machine goes into some kind of sleep state and Arch is suspended (black screen, no response to anything). It may be easy to wake up Windows from such a condition but what must I do get Arch back and working, short of having to reboot?
Last edited by RobF (2007-07-05 20:08:41)thayer.w wrote:
RobF, it's hard to say, without knowing what your setup is... GNOME, KDE? Any power management software installed such as Powersaved or hibernation scripts?
If you're still having troubles with it, check out the Inspiron 6400 wiki I've been working on. It includes step-by-step instructions on setting up hibernation/suspend features and I can verify it works on my own 6400.
http://wiki.archlinux.org/index.php/Dell_Inspiron_6400
I'm using KDE, and I haven't specifically installed any power management software aside from what came with the Arch base install and KDE.
I went through your Dell Inspiron 6400 Wiki (great work! I'll add to it) and installed acpid and powersave and hoped to install kpowersave or kpowersave-devel but neither of these will compile. kpowersave requires unsermake-svn but unsermake-svn will not compile because of the error: "unsermake-svn is not available for the 'i686' architecture," and: "Note that many packages may need a line added to their PKGBUILD such as arch=('i686')." So much about that.
Trying to build the package kpowersave-devel also aborts with the error:
Checking for Qt... configure: error: Qt (>= Qt 3.2 and < 4.0) (headers an ..... r installation!
For more details about this problem, look at the end of config.log.
make: *** No targets specified and no makefile found. Stop.
==> ERROR: Build Failed. Aborting...
So much about that.
About kpowersave-devel, srabd commented a month ago: "It doesn't compile now, but compiles if you use unsermake instead of make in the two final lines." Wonderful! But as I reported above, "unsermake-svn is not available for the 'i686' architecture."
I seem to be stuck. Any ideas how I can get around this?
Robert -
Hi, does anyone use archlinux on a dell inspiron 6400? Do you have any advice on how to speed up the boot, and configure the machine for best performance? Actually, i don't have any problem or so, just wondering howto increase my system perfomance and remove any kind of useless stuff to speed up my machine a bit
Did you read this wiki article?
http://wiki.archlinux.org/index.php/Max … erformance
Not specific to your machine, but contains some general hints. -
[Solved]No Ethernet or Wireless to work on Dell Inspiron 6400 E1505.
The Dell Inspiron 6400 E1505 wiki says ethernet should work out of box. It is not. I am trying to install wireless drivers. I checked fw-cutter during installation but i guess i have to install broadcom-wl along with it. Make command is not found (probably not installed) How can get ethernet connection to work?
Thanks.
Last edited by donniezazen (2011-12-23 04:04:52)Gusar wrote:We need more info about what kind of hardware is in that thing. So post the output of lscpi -nn
Sorry about that.
lspci -vnn | grep 14e4
Ethernet - Broadcom BCM4401-B0 100Base-TX [14e4:170c]
Network - Broadcom BCM4311 802.11b/g WLAN [14e4:4311]
lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1)
03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832]
03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a)
03:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 05)
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) -
Ipod to Dell Inspiron 6400 problems
Hello
I am trying to connect my 4th gen Ipod to my new Dell Inspiron 6400 laptop and connecting it just makes the pc become very slow. If i wait long enough (an hour or so) it'll come up with Itunes which says the ipod needs formatting, but then crashes as it loads the ipod updater. The Ipod will still work with my old desktop but i want to transfer it to the laptop.
Does anyone know why this is happening? I spoke with Dell and they said i needed to get a fix from Apple, but i can't seem to find anything on the website.
Any help would be appreciated
MarkDid you read this wiki article?
http://wiki.archlinux.org/index.php/Max … erformance
Not specific to your machine, but contains some general hints. -
Installation on a DELL Inspiron 6400 Laptop - PROBLEMS!!!!
Hi All,
I'm a newbie to Solaris 10 and decided to install the OS on my laptop with XP, OpenSUSE 11, Open Solaris and finally Solaris 10. When i have finished the complete installation, Solaris will re-start and i select Solaris 10 and eventually i get a sendmail error message, which i Ignore and i wait for the desktop login screen to appear before i log in. However, im constantly waiting and nothing happens and there is no GUI and its just hangs. Is anyone experiencing this problem and if they have managed to fix this i would very much appreciate all the help i can get!!
Regards,
SunilI found this website very helpful while I was installing my Solaris software and encountered some problems. You can also check it out in here. http://docs.sun.com/app/docs/doc/817-0544
Liza -
Old HP 1160Le to new Dell Inspiron. Limited print options.
Have just started using new Dell Inspiron, I think Windows 8. Connected with printer in Port 1 with driver for HP Laserjet 1160. Printer works but some print options are not available. Cannot select Print odd number pages or Print even number pages, or Print to File. Probably more limits just not found yet. Have tried looking at defaults, no luck. Tried to find HP Laserjet 1160 Le in wider PC listing, no luck. Yes, the printer is old and just black and white, but has always worked until now. How would you go about adding these printing features or expanding print options in general?
Hi there and welcome to the forums
I saw your post about trying to install and use your PSC 750 on your new Windows 8.1 system. After checking the drivers out for this printer, I have discovered that there is no driver available for Windows 8.1. Perhaps try running the HP Print and Scan Doctor to see if that will help with printing. If not, I would then suggest looking into an upgraded printer which will have more up to date software and would most likely function with 8.1.
HP PSC 750 All-in-One Printer Drivers
If you were to call HP, they may have a trade in option for you, if you're interested, I will include their contact info.
If you're calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
I hope you found this information helpful!
Enjoy the rest of your Tuesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
I am unable to see, access, or navigate to, the far right side of iTunes 11.3.1.2 home screen on Dell Inspiron 3000 Windows 8.1 w/64-bit Pentium Processor.
Try dragging the window away from its location, resizing it, then maximizing it. There's been a bug since iTunes 11 that doesn't always size the window correctly if set to run maximized automatically (which I've notice most particularly on dual-screen systems).
-
I have a new Dell Inspiron 15R. I closed it without shutting it down and when I tried to start it up I get a blank screen with my cursor. What's wrong.
You may get a reply here but it's best to post a question in the columns it naturally belongs to; in this case Dell forums.
-
Hi all
Ihave installed solution manager4.0 with java addin,all of the sudden iam unable to start the j2ee engine,work process got ended
Please find the log below
E:\usr\sap\ABC\DVEBMGS01\work
DEV_DISP:log
=========
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid ABC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 320
Fri May 16 21:41:01 2008
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 320) [dpxxdisp.c 1231]
shared lib "dw_xml.dll" version 52 successfully loaded
shared lib "dw_xtc.dll" version 52 successfully loaded
shared lib "dw_stl.dll" version 52 successfully loaded
shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Fri May 16 21:41:06 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >intel_ABC_01 <
DpShMCreate: sizeof(wp_adm) 12672 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05F00040, size: 4607512)
DpShMCreate: allocated sys_adm at 05F00040
DpShMCreate: allocated wp_adm at 05F01E28
DpShMCreate: allocated tm_adm_list at 05F04FA8
DpShMCreate: allocated tm_adm at 05F04FD8
DpShMCreate: allocated wp_ca_adm at 062CA570
DpShMCreate: allocated appc_ca_adm at 062D0330
DpShMCreate: allocated comm_adm at 062D2270
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06353130
DpShMCreate: allocated gw_adm at 06353170
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 063531A0
DpShMCreate: allocated wall_adm at 063531A8
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3652
argv[0] = E:\usr\sap\ABC\DVEBMGS01\exe\jcontrol.EXE
argv[1] = E:\usr\sap\ABC\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\ABC\SYS\profile\ABC_DVEBMGS01_intel
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2122
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=ABC
argv[7] = -DSAPMYNAME=intel_ABC_01
argv[8] = -DSAPPROFILE=E:\usr\sap\ABC\SYS\profile\ABC_DVEBMGS01_intel
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
***LOG Q0K=> DpMsAttach, mscon ( intel) [dpxxdisp.c 11414]
DpStartStopMsg: send start message (myname is >intel_ABC_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Fri May 16 21:41:07 2008
DpJ2eeLogin: j2ee state = CONNECTED
Fri May 16 21:41:13 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1544
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2125) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3652)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri May 16 21:41:46 2008
ERROR => W0 (pid 3808) died [dpxxdisp.c 14021]
ERROR => W1 (pid 3872) died [dpxxdisp.c 14021]
ERROR => W2 (pid 2132) died [dpxxdisp.c 14021]
ERROR => W3 (pid 3212) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 2184) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 3064) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 2744) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W7 (pid 2652) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W8 (pid 3216) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:41:56 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri May 16 16:11:56 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3808 Ended no 1 0 0
1 DIA 3872 Ended no 1 0 0
2 DIA 2132 Ended no 1 0 0
3 DIA 3212 Ended no 1 0 0
4 UPD 2184 Ended no 1 0 0
5 ENQ 3064 Ended no 1 0 0
6 BTC 2744 Ended no 1 0 0
7 SPO 2652 Ended no 1 0 0
8 UP2 3216 Ended no 1 0 0
Dispatcher Queue Statistics Fri May 16 16:11:56 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Fri May 16 16:11:56 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri May 16 16:11:56 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:01 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >intel_ABC_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3252) (SOFT_KILL)
Stop icman
killing process (3456) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3252 HANDLE:1628)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:02 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3252 HANDLE:1628)
wait for end of icman
[DpProcDied] Process lives (PID:3456 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:03 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3456 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:04 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3456 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3456 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3456 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3456 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3456 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3456 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3456 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3456 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3456 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 21:42:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3456 HANDLE:1636)
[DpProcDied] Process died (PID:3652 HANDLE:1612)
DpStartStopMsg: send stop message (myname is >intel_ABC_01 <)
NiIMyHostName: hostname = 'intel'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Fri May 16 21:42:14 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11698]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1572 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1572 (pos=3)
SiSelNRemove: removed sock 1572
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/9
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1572
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 320) [dpxxdisp.c 10087]
Good Bye .....
log_bootstrap_ID0165133.0.log:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[..\..\work\log_bootstrap_ID0165133.log]/>
<!PATTERN[log_bootstrap_ID0165133.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter([%24d] %m)]/>
<!ENCODING[Cp1252]/>
<!FILESET[0, 2, 2097152]/>
<!PREVIOUSFILE[log_bootstrap_ID0165133.1.log]/>
<!NEXTFILE[log_bootstrap_ID0165133.1.log]/>
<!LOGHEADER[END]/>
[May 15, 2008 8:08:55 AM ] -
[May 15, 2008 8:08:55 AM ] Bootstrap MODE:
[May 15, 2008 8:08:55 AM ] <INSTANCE GLOBALS>
[May 15, 2008 8:08:55 AM ] determined by parameter [ID0165133].
[May 15, 2008 8:08:55 AM ] -
[May 15, 2008 8:09:01 AM ] Missing RunningMode property - runningin NORMAL mode.
[May 15, 2008 8:09:01 AM ] Instance [ID165133] will run in [NORMAL] mode, performing action [NONE]
[May 15, 2008 8:09:01 AM ] Discovered property [instance.en.port] with value [3200] !
[May 15, 2008 8:09:01 AM ] Discovered property [instance.en.host] with value [intel] !
[May 15, 2008 8:09:01 AM ] Synchronizing file [.\.hotspot_compiler].
[May 15, 2008 8:09:01 AM ] ...Synched ok!
[May 15, 2008 8:09:01 AM ] Synchronizing file [..\..\SDM\program\.hotspot_compiler].
[May 15, 2008 8:09:01 AM ] ...Synched ok!
[May 15, 2008 8:09:01 AM ] * Synchronizing native files...
[May 15, 2008 8:09:01 AM ] Synchronizing file [.\..\os_libs\sapbiado.dll].
[May 15, 2008 8:09:01 AM ] ...Synched ok!
[May 15, 2008 8:09:01 AM ] Synchronizing file [.\..\os_libs\PDFManipulation_native.zip].
[May 15, 2008 8:09:04 AM ] ...Synched ok!
[May 15, 2008 8:09:04 AM ] Synchronizing file [.\..\os_libs\rscp4j.dll].
[May 15, 2008 8:09:05 AM ] ...Synched ok!
[May 15, 2008 8:09:05 AM ] Synchronizing file [.\..\os_libs\FontManagerService_native.zip].
[May 15, 2008 8:09:18 AM ] ...Synched ok!
[May 15, 2008 8:09:18 AM ] Synchronizing file [.\..\os_libs\XMLFormService_native.zip].
[May 15, 2008 8:09:19 AM ] ...Synched ok!
[May 15, 2008 8:09:19 AM ] Synchronizing file [.\..\os_libs\LicenseSupportService_native.zip].
[May 15, 2008 8:09:20 AM ] ...Synched ok!
[May 15, 2008 8:09:20 AM ] Synchronizing file [.\..\os_libs\rscp4j.pdb].
[May 15, 2008 8:09:20 AM ] ...Synched ok!
[May 15, 2008 8:09:20 AM ] Synchronizing file [.\..\os_libs\jmon.dll].
[May 15, 2008 8:09:21 AM ] ...Synched ok!
[May 15, 2008 8:09:21 AM ] Synchronizing file [.\..\os_libs\ServicesNatives2_native.zip].
[May 15, 2008 8:09:21 AM ] ...Synched ok!
[May 15, 2008 8:09:21 AM ] Done!
[May 15, 2008 8:09:22 AM ] Synch time: 26953 ms
[May 15, 2008 6:31:15 PM ] -
[May 15, 2008 6:31:15 PM ] Bootstrap MODE:
[May 15, 2008 6:31:15 PM ] <INSTANCE GLOBALS>
[May 15, 2008 6:31:15 PM ] determined by parameter [ID0165133].
[May 15, 2008 6:31:15 PM ] -
[May 15, 2008 6:31:23 PM ] Missing RunningMode property - runningin NORMAL mode.
[May 15, 2008 6:31:24 PM ] Instance [ID165133] will run in [NORMAL] mode, performing action [NONE]
[May 15, 2008 6:31:24 PM ] Discovered property [instance.en.port] with value [3200] !
[May 15, 2008 6:31:24 PM ] Discovered property [instance.en.host] with value [intel] !
[May 15, 2008 6:31:24 PM ] Synchronizing file [.\.hotspot_compiler].
[May 15, 2008 6:31:24 PM ] ...Synched ok!
[May 15, 2008 6:31:24 PM ] Synchronizing file [..\..\SDM\program\.hotspot_compiler].
[May 15, 2008 6:31:24 PM ] ...Synched ok!
[May 15, 2008 6:31:24 PM ] Synch time: 8750 ms
[May 15, 2008 6:42:44 PM ] -
[May 15, 2008 6:42:44 PM ] Bootstrap MODE:
[May 15, 2008 6:42:44 PM ] <INSTANCE GLOBALS>
[May 15, 2008 6:42:44 PM ] determined by parameter [ID0165133].
[May 15, 2008 6:42:44 PM ] -
[May 15, 2008 6:42:48 PM ] Missing RunningMode property - runningin NORMAL mode.
[May 15, 2008 6:42:48 PM ] Instance [ID165133] will run in [NORMAL] mode, performing action [NONE]
[May 15, 2008 6:42:48 PM ] Discovered property [instance.en.port] with value [3200] !
[May 15, 2008 6:42:48 PM ] Discovered property [instance.en.host] with value [intel] !
[May 15, 2008 6:42:48 PM ] Synchronizing file [.\.hotspot_compiler].
[May 15, 2008 6:42:48 PM ] ...Synched ok!
[May 15, 2008 6:42:48 PM ] Synchronizing file [..\..\SDM\program\.hotspot_compiler].
[May 15, 2008 6:42:48 PM ] ...Synched ok!
[May 15, 2008 6:42:49 PM ] Synch time: 5141 ms
[May 15, 2008 8:00:02 PM ] -
[May 15, 2008 8:00:02 PM ] Bootstrap MODE:
[May 15, 2008 8:00:02 PM ] <INSTANCE GLOBALS>
[May 15, 2008 8:00:02 PM ] determined by parameter [ID0165133].
[May 15, 2008 8:00:02 PM ] -
[May 15, 2008 8:00:06 PM ] Missing RunningMode property - runningin NORMAL mode.
[May 15, 2008 8:00:06 PM ] Instance [ID165133] will run in [NORMAL] mode, performing action [NONE]
[May 15, 2008 8:00:06 PM ] Discovered property [instance.en.port] with value [3200] !
[May 15, 2008 8:00:06 PM ] Discovered property [instance.en.host] with value [intel] !
[May 15, 2008 8:00:06 PM ] Synchronizing file [.\.hotspot_compiler].
[May 15, 2008 8:00:06 PM ] ...Synched ok!
[May 15, 2008 8:00:06 PM ] Synchronizing file [..\..\SDM\program\.hotspot_compiler].
[May 15, 2008 8:00:06 PM ] ...Synched ok!
[May 15, 2008 8:00:07 PM ] Synch time: 4344 ms
[May 15, 2008 9:19:05 PM ] -
[May 15, 2008 9:19:05 PM ] Bootstrap MODE:
[May 15, 2008 9:19:05 PM ] <INSTANCE GLOBALS>
[May 15, 2008 9:19:05 PM ] determined by parameter [ID0165133].
[May 15, 2008 9:19:05 PM ] -
[May 15, 2008 9:19:11 PM ] Missing RunningMode property - runningin NORMAL mode.
[May 15, 2008 9:19:11 PM ] Instance [ID165133] will run in [NORMAL] mode, performing action [NONE]
[May 15, 2008 9:19:11 PM ] Discovered property [instance.en.port] with value [3200] !
[May 15, 2008 9:19:11 PM ] Discovered property [instance.en.host] with value [intel] !
[May 15, 2008 9:19:11 PM ] Synchronizing file [.\.hotspot_compiler].
[May 15, 2008 9:19:11 PM ] ...Synched ok!
[May 15, 2008 9:19:11 PM ] Synchronizing file [..\..\SDM\program\.hotspot_compiler].
[May 15, 2008 9:19:11 PM ] ...Synched ok!
[May 15, 2008 9:19:15 PM ] Synch time: 9672 ms
[May 16, 2008 8:07:18 PM ] -
[May 16, 2008 8:07:18 PM ] Bootstrap MODE:
[May 16, 2008 8:07:18 PM ] <INSTANCE GLOBALS>
[May 16, 2008 8:07:18 PM ] determined by parameter [ID0165133].
[May 16, 2008 8:07:18 PM ] -
[May 16, 2008 8:07:24 PM ] Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:360)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:302)
... 14 more
[May 16, 2008 8:07:24 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
[May 16, 2008 8:09:52 PM ] -
[May 16, 2008 8:09:52 PM ] Bootstrap MODE:
[May 16, 2008 8:09:52 PM ] <INSTANCE GLOBALS>
[May 16, 2008 8:09:52 PM ] determined by parameter [ID0165133].
[May 16, 2008 8:09:52 PM ] -
[May 16, 2008 8:09:56 PM ] Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:360)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:302)
... 14 more
[May 16, 2008 8:09:56 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
[May 16, 2008 8:50:02 PM ] -
[May 16, 2008 8:50:02 PM ] Bootstrap MODE:
[May 16, 2008 8:50:02 PM ] <INSTANCE GLOBALS>
[May 16, 2008 8:50:02 PM ] determined by parameter [ID0165133].
[May 16, 2008 8:50:02 PM ] -
[May 16, 2008 8:50:06 PM ] Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:360)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:302)
... 14 more
[May 16, 2008 8:50:06 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
[May 16, 2008 9:41:08 PM ] -
[May 16, 2008 9:41:08 PM ] Bootstrap MODE:
[May 16, 2008 9:41:08 PM ] <INSTANCE GLOBALS>
[May 16, 2008 9:41:08 PM ] determined by parameter [ID0165133].
[May 16, 2008 9:41:08 PM ] -
[May 16, 2008 9:41:12 PM ] Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:360)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:302)
... 14 more
[May 16, 2008 9:41:12 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
DEV_JCONTROL LOG:
trc file: "E:\usr\sap\ABC\DVEBMGS01\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 3652
system name : ABC
system nr. : 01
started at : Fri May 16 21:41:06 2008
arguments :
arg[00] : E:\usr\sap\ABC\DVEBMGS01\exe\jcontrol.EXE
arg[01] : pf=E:\usr\sap\ABC\SYS\profile\ABC_DVEBMGS01_intel
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=2122
arg[04] : -DSAPSYSTEM=01
arg[05] : -DSAPSYSTEMNAME=ABC
arg[06] : -DSAPMYNAME=intel_ABC_01
arg[07] : -DSAPPROFILE=E:\usr\sap\ABC\SYS\profile\ABC_DVEBMGS01_intel
arg[08] : -DFRFC_FALLBACK=ON
arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 3688] Fri May 16 21:41:06 2008
[Thr 3688] *** WARNING => INFO: Unknown property [instance.box.number=ABCDVEBMGS01intel] [jstartxx.c 841]
[Thr 3688] *** WARNING => INFO: Unknown property [instance.en.host=intel] [jstartxx.c 841]
[Thr 3688] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c 841]
[Thr 3688] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [E:\usr\sap\ABC\DVEBMGS01\j2ee\cluster\instance.properties;E:\usr\sap\ABC\DVEBMGS01\SDM\program\config\sdm_jstartup.properties]
-> ms host : intel
-> ms port : 3900
-> OS libs : E:\usr\sap\ABC\DVEBMGS01\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : E:\usr\sap\ABC\DVEBMGS01\j2ee\cluster\instance.properties
-> files [01] : E:\usr\sap\ABC\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : intel
-> ms port : 3900
-> os libs : E:\usr\sap\ABC\DVEBMGS01\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : E:\usr\sap\ABC\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID16513300 : E:\usr\sap\ABC\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID16513350 : E:\usr\sap\ABC\DVEBMGS01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID16513300 : E:\usr\sap\ABC\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] ID16513350 : E:\usr\sap\ABC\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] sdm : E:\usr\sap\ABC\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
[Thr 3688] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 3688] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 3688] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\ABC\DVEBMGS01\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 256M
-> root path : E:\usr\sap\ABC\DVEBMGS01\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : E:\usr\sap\ABC\DVEBMGS01\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : E:\usr\sap\ABC\DVEBMGS01\exe\jstartup.jar;E:\usr\sap\ABC\DVEBMGS01\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0165133
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = E:\usr\sap\ABC\DVEBMGS01\exe\jlaunch.exe
-> arg[00] = E:\usr\sap\ABC\DVEBMGS01\exe\jlaunch.exe
-> arg[01] = pf=E:\usr\sap\ABC\SYS\profile\ABC_DVEBMGS01_intel
-> arg[02] = -DSAPINFO=ABC_01_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=E:\usr\sap\ABC\DVEBMGS01\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_3652
-> arg[06] = -nodeName=bootstrap
-> arg[07] = -jvmOutFile=E:\usr\sap\ABC\DVEBMGS01\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=E:\usr\sap\ABC\DVEBMGS01\work\std_bootstrap.out
-> arg[09] = -locOutFile=E:\usr\sap\ABC\DVEBMGS01\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=E:\usr\sap\ABC\SYS\profile\ABC_DVEBMGS01_intel
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=2126
-> arg[14] = -DSAPSYSTEM=01
-> arg[15] = -DSAPSYSTEMNAME=ABC
-> arg[16] = -DSAPMYNAME=intel_ABC_01
-> arg[17] = -DSAPPROFILE=E:\usr\sap\ABC\SYS\profile\ABC_DVEBMGS01_intel
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;E:\oracle\DEV\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;E:\usr\sap\ABC\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;E:\usr\sap\ABC\DVEBMGS01\j2ee\os_libs;E:\oracle\DEV\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;E:\usr\sap\ABC\SYS\exe\uc\NTI386
[Thr 2388] JControlDPMessageFunc: Thread 2388 started as handler thread for R/3 dispatcher messages.
[Thr 3688] Fri May 16 21:41:13 2008
[Thr 3688] *** ERROR => invalid return code of process [bootstrap] (exitcode = 66) [jstartxx.c 1642]
[Thr 3688] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = 66)
[Thr 3688] JControlCloseProgram: started (exitcode = 66)
[Thr 3688] JControlCloseProgram: good bye... (exitcode = 66)
Hi All
Iam able to connect to database see the log below, all the services are running fine,iam unable to login to abap instance,all wp getting ended,
C:\Documents and Settings\abcadm.INTEL>r3trans -d
This is r3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_o
ra_tnsname = 'DEV'"
r3trans finished (0012).
E:\usr\sap\ABC\DVEBMGS01\work>echo WHENEVER SQLERROR exit SQL.SQLCODE 1>v9start.sql
E:\usr\sap\ABC\DVEBMGS01\work>echo connect / as sysdba 1>>v9start.sql
E:\usr\sap\ABC\DVEBMGS01\work>echo startup 1>>v9start.sql
E:\usr\sap\ABC\DVEBMGS01\work>echo exit 1>>v9start.sql
SQL*Plus: Release 10.2.0.2.0 - Production on Sat May 17 08:35:47 2008
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 394264576 bytes
Fixed Size 1289664 bytes
Variable Size 268436032 bytes
Database Buffers 121634816 bytes
Redo Buffers 2904064 bytes
Database mounted.
Database opened.
iam unable to start config tool or visual admin ended with no connection to database
trc file: "dev_disp", trc level: 1, release: "640"
Sat May 17 08:28:42 2008
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 2844
***LOG Q00=> DpSapEnvInit, DPStart (03 2844) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Sat May 17 08:28:47 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04550040, size: 3192688)
DpShMCreate: allocated sys_adm at 04550040
DpShMCreate: allocated wp_adm at 04551B58
DpShMCreate: allocated tm_adm_list at 04554478
DpShMCreate: allocated tm_adm at 045544A0
DpShMCreate: allocated wp_ca_adm at 047FB0E8
DpShMCreate: allocated appc_ca_adm at 04800EA8
DpShMCreate: allocated comm_adm_list at 04802DE8
DpShMCreate: allocated comm_adm at 04802E00
DpShMCreate: allocated vmc_adm_list at 04849AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04849AF8
DpShMCreate: allocated wall_adm at 04849B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 915 blocks reserved for free list.
ES initialized.
Sat May 17 08:28:48 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( intel) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Sat May 17 08:28:49 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Sat May 17 08:29:28 2008
ERROR => W0 (pid 3116) died [dpxxdisp.c 12187]
ERROR => W1 (pid 3124) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3132) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3140) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3148) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3156) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3164) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3172) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3116 (SIGUSR2)
ERROR => DpWpKill(3116, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3124 (SIGUSR2)
ERROR => DpWpKill(3124, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3132 (SIGUSR2)
ERROR => DpWpKill(3132, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3140 (SIGUSR2)
ERROR => DpWpKill(3140, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3148 (SIGUSR2)
ERROR => DpWpKill(3148, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3156 (SIGUSR2)
ERROR => DpWpKill(3156, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3164 (SIGUSR2)
ERROR => DpWpKill(3164, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3172 (SIGUSR2)
ERROR => DpWpKill(3172, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1653
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat May 17 08:29:38 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Sat May 17 02:59:38 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3116 Ended no 1 0 0
1 DIA 3124 Ended no 1 0 0
2 UPD 3132 Ended no 1 0 0
3 ENQ 3140 Ended no 1 0 0
4 BTC 3148 Ended no 1 0 0
5 BTC 3156 Ended no 1 0 0
6 SPO 3164 Ended no 1 0 0
7 UP2 3172 Ended no 1 0 0
Dispatcher Queue Statistics Sat May 17 02:59:38 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Sat May 17 02:59:38 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T8, U9, , intel, 08:29:07, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Sat May 17 02:59:38 2008
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1653
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat May 17 08:29:43 2008
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3100) (SOFT_KILL)
Stop icman
killing process (3108) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 8
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/8
LOCK WP ca_blk 2
return errno (-17) to T8
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T8 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1476
dp_tm_adm[8].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1210993188
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 8
DpListInsert: insert elem 8 into tmadm_free_list (at begin)
DpListInsert: 193 elems in tmadm_free_list
DpListRemove: remove elem 8 from tmadm_inuse_list
DpListRemove: 8 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:3100 HANDLE:1624)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1653
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat May 17 08:29:44 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3100 HANDLE:1624)
[DpProcDied] Process died (PID:3108 HANDLE:1616)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'intel'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/8
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1632
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2844) [dpxxdisp.c 8495]
Good Bye .....
Thanks
Uday -
Dell Inspiron 14R WLAN Card Disabled
Hello,
I have a Dell Inspiron 14R running Windows 7 64 bit. I have had my PC from this past November; about 7 months.
I was using my PC, and suddenly, I started to experience wireless problems. I was unable to get onto the internet. Other devices on my wireless network are able to log on to our network, although that is irrelevant because my radio wasn't picking up anything at all, when it always had from that same location. The connection worked fine using an ethernet cable. After the problem occurred, my Targus Bluetooth mouse also stopped working. This is what I have tried:
Going into Network and Sharing Center, disabling my network adapter, and then enabling it again. This usually does the trick. After doing it over 5 times, it never worked.
Doing a simple system restore. I attempted restoring 3 different times to an update within the last week, each of which failed (probably another issue altogether).
Re-installing my WLAN CARD Driver, and then restarting. This didn't solve the problem.
Checking the Device Manager. It reported that the wireless card was running properly.
Using the DW WLAN CARD Utility. It says under the Link Status tab, after Connection Status, Radio Disabled. I tried right-clicking the icon in my Notification Area, and then clicking Enable Radio. It then shows an alert saying "The WLAN card is still disabled. Use the wireless switch or hotkey to enable it." Pressing Fn + F2, which is also supposed to enable the radio, did nothing, with no action or sign whatsoever from Windows. I also tried running tests under the Diagnostics tab. All hardware tests passed, with the Connection test giving me this alert again: "The WLAN card is still disabled. Use the wireless switch or hotkey to enable it," and then failing. The same thing happened when running the CCX Client diagnostics.
What should I do? The problem is obvious that my card is disabled, as all signs point to that. Does anyone have any ideas on how I could fix it? I've tried everything I know, not to mention countless Google searches.
Thanks!I am experiencing the same issue with my Inspiron N4010. The network card has disappeared from the system devices. After a reboot, the network connected for about 15 seconds and then went away. I had the system devices displayed at the same time and the network card also disappeared when the network went down. The card worked fine until today. What is the cheapest route to fix this?
Also note the sound has come and gone over the past year. It is not working at the moment. It would be nice to fix both, but will the cost be greater than buying a new laptop or tablet?
I can't say I will ever buy a Dell product again. These laptops seem to only last a year or two. Even my more expensive work laptop which is less than a year old has had its motherboard and hard drive replaced. -
Dell Inspiron 1300 laptop wont connect to router anymore
Eveything was great untl I had to change the encryption code on the router, now I cant get the laptop to connect to the router anymore. Nothing was changed on the computer and the only thing that was changed on the router was the encryption code. The Dell laptop has a 1370 mini wireless card in it running windows XP, and I updated it last night to the latest driver. My Dell Inspiron 1525 laptop has no problem connecting to it. The wireless router is a WRT54GS. I have also started wireless zero configuration and checked the box to let windows control my wireless. And the box in properties that says "Enable IEEE 802.1authentication for this network" is not checked.
Sometimes when I try to connect it, it will say connected when it isnt connected to anything. Other times when I try to connect it will connect to another wireless internet in the neighborhood that doesnt have any encryption. And then other times I get the message that says "windows was unable to find a certificate to log you on to the network". I got it to connect when I took the the encryption off the router but for some reason it doesnt want to connect with encryption on it. I am using WEP 64bit. I checked all the settings on both the laptops and the wireless settings are exactly the same. I dont understand why mine will connect and the other one wont. Any ideas?You can try manually adding the network on your computer, Also change the SSID on the router if it is linksys(default).
To add the network manually try the below mentioned settings.......
Click on Start and go to the Control Panel and double click on Network Connections, right click on Wireless Network Connection disable it and then Re-enable it .
Right click on Wireless Network Connection and click on Properties,Now on this window, click on the second tab Wireless Network and give a check mark on "Use windows to configure my wireless" and then remove all the network names present in the Preferred Networks Window. Then click on OK...
Right click on the Wireless Network Connection again and click on View Available Wireless Networks and try to re-connect to your network...
Now it will give you the opportunity to put the network/security key, make sure you enter the correct network key and confirm it...
It will connect...
That should resolve the issue for you. -
DEll Inspiron 15z 5523 keyboard backlight not working
hi,
Yesterday I bought Dell Inspiron 15z 5523.The keyboard backlight does not work. I have tried the following:
OS (Windows 8 64 bit)
1) Fn+ F6 -- > Nothing happened
2) Opened Windows mobility center --> Keyboard back light option not available
3) c:\Program Files\Dell\QuickSet\BacklitKB -- > Unable to detect the backlight keyboard
Please Help .. Thank youHi haseebanwar,
I am sorry about the situation, Please send me the system service tag or express service code through a private chat, I will see what best can be done.
Click on my username select start a private conversation and send me the details. Please refer to the link below where to locate the service tag or express service code.
http://dell.to/162b3za
Let me know about the progress -
Unable to start xorg after latest nvidia update
Hi,
I have NVIDIA GeForce GTX 750 card. I did update to version 346.47 of nvidia driver and figured out that after reboot SDDM dont start. I disabled login manager and tried to start xorg server manually but without success. I see that there is segmentation fault in log but don't understand where it comes from exectly.
Output of /var/log/Xorg.0.log:
[ 18.250]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 18.251] X Protocol Version 11, Revision 0
[ 18.251] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 18.251] Current Operating System: Linux lolik-pc 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 18.251] Kernel command line: \boot\vmlinuz-linux rw root=UUID=d0592c05-2ed2-4bd2-be47-6a2762e5c3c3 rootfstype=ext4 initrd=boot\initramfs-linux.img
[ 18.252] Build Date: 22 February 2015 12:50:32PM
[ 18.253]
[ 18.253] Current version of pixman: 0.32.6
[ 18.254] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.254] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.255] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 28 13:33:14 2015
[ 18.260] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.261] (==) No Layout section. Using the first Screen section.
[ 18.261] (==) No screen section available. Using defaults.
[ 18.261] (**) |-->Screen "Default Screen Section" (0)
[ 18.261] (**) | |-->Monitor "<default monitor>"
[ 18.261] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.261] (==) Automatically adding devices
[ 18.261] (==) Automatically enabling devices
[ 18.261] (==) Automatically adding GPU devices
[ 18.267] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 18.267] Entry deleted from font path.
[ 18.267] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 18.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 18.271] Entry deleted from font path.
[ 18.271] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 18.272] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 18.272] Entry deleted from font path.
[ 18.272] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 18.272] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 18.272] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.272] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.272] (II) Loader magic: 0x815d80
[ 18.272] (II) Module ABI versions:
[ 18.272] X.Org ANSI C Emulation: 0.4
[ 18.272] X.Org Video Driver: 19.0
[ 18.272] X.Org XInput driver : 21.0
[ 18.272] X.Org Server Extension : 9.0
[ 18.273] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 18.273] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.273] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 18.273] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 18.273] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[ 18.274] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 18.274] (--) PCI:*(0:1:0:0) 10de:1380:1462:3102 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 18.274] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.274] (II) LoadModule: "glx"
[ 18.275] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.342] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.342] compiled for 4.0.2, module version = 1.0.0
[ 18.342] Module class: X.Org Server Extension
[ 18.343] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 18.343] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.343] loading driver: nvidia
[ 18.343] (==) Matched nvidia as autoconfigured driver 0
[ 18.343] (==) Matched nouveau as autoconfigured driver 1
[ 18.343] (==) Matched nv as autoconfigured driver 2
[ 18.343] (==) Matched intel as autoconfigured driver 3
[ 18.343] (==) Matched nouveau as autoconfigured driver 4
[ 18.343] (==) Matched nv as autoconfigured driver 5
[ 18.343] (==) Matched modesetting as autoconfigured driver 6
[ 18.343] (==) Matched fbdev as autoconfigured driver 7
[ 18.343] (==) Matched vesa as autoconfigured driver 8
[ 18.343] (==) Assigned the driver to the xf86ConfigLayout
[ 18.343] (II) LoadModule: "nvidia"
[ 18.344] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.349] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.349] compiled for 4.0.2, module version = 1.0.0
[ 18.349] Module class: X.Org Video Driver
[ 18.350] (II) LoadModule: "nouveau"
[ 18.350] (WW) Warning, couldn't open module nouveau
[ 18.350] (II) UnloadModule: "nouveau"
[ 18.350] (II) Unloading nouveau
[ 18.350] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 18.350] (II) LoadModule: "nv"
[ 18.350] (WW) Warning, couldn't open module nv
[ 18.350] (II) UnloadModule: "nv"
[ 18.350] (II) Unloading nv
[ 18.350] (EE) Failed to load module "nv" (module does not exist, 0)
[ 18.350] (II) LoadModule: "intel"
[ 18.350] (WW) Warning, couldn't open module intel
[ 18.350] (II) UnloadModule: "intel"
[ 18.350] (II) Unloading intel
[ 18.350] (EE) Failed to load module "intel" (module does not exist, 0)
[ 18.350] (II) LoadModule: "modesetting"
[ 18.350] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.350] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.350] compiled for 1.17.1, module version = 1.17.1
[ 18.350] Module class: X.Org Video Driver
[ 18.350] ABI class: X.Org Video Driver, version 19.0
[ 18.350] (II) LoadModule: "fbdev"
[ 18.350] (WW) Warning, couldn't open module fbdev
[ 18.350] (II) UnloadModule: "fbdev"
[ 18.350] (II) Unloading fbdev
[ 18.350] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.350] (II) LoadModule: "vesa"
[ 18.350] (WW) Warning, couldn't open module vesa
[ 18.350] (II) UnloadModule: "vesa"
[ 18.350] (II) Unloading vesa
[ 18.350] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 18.350] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 18.350] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.351] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.351] (++) using VT number 1
[ 18.351] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 18.351] (II) Loading sub module "fb"
[ 18.351] (II) LoadModule: "fb"
[ 18.351] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.352] (II) Module fb: vendor="X.Org Foundation"
[ 18.352] compiled for 1.17.1, module version = 1.0.0
[ 18.352] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.352] (II) Loading sub module "wfb"
[ 18.352] (II) LoadModule: "wfb"
[ 18.352] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.353] (II) Module wfb: vendor="X.Org Foundation"
[ 18.353] compiled for 1.17.1, module version = 1.0.0
[ 18.353] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.353] (II) Loading sub module "ramdac"
[ 18.353] (II) LoadModule: "ramdac"
[ 18.353] (II) Module "ramdac" already built-in
[ 18.354] (II) modeset(G0): using drv /dev/dri/card1
[ 18.354] (WW) Falling back to old probe method for modesetting
[ 18.354] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.354] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 18.354] (==) NVIDIA(0): RGB weight 888
[ 18.354] (==) NVIDIA(0): Default visual is TrueColor
[ 18.354] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.354] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.948] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 18.948] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 750 Ti (GM107-A) at PCI:1:0:0 (GPU-0)
[ 18.948] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 18.948] (--) NVIDIA(0): VideoBIOS: 82.07.32.00.18
[ 18.948] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 18.952] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 750 Ti at PCI:1:0:0
[ 18.952] (--) NVIDIA(0): CRT-0
[ 18.952] (--) NVIDIA(0): DELL U2211H (DFP-0) (boot, connected)
[ 18.952] (--) NVIDIA(0): DFP-1
[ 18.952] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 18.952] (--) NVIDIA(0): DELL U2211H (DFP-0): Internal TMDS
[ 18.952] (--) NVIDIA(GPU-0): DELL U2211H (DFP-0): 330.0 MHz maximum pixel clock
[ 18.952] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 18.952] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 18.952] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18.952] (**) NVIDIA(0): device DELL U2211H (DFP-0) (Using EDID frequencies has
[ 18.952] (**) NVIDIA(0): been enabled on all display devices.)
[ 18.953] (==) NVIDIA(0):
[ 18.953] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 18.953] (==) NVIDIA(0): will be used as the requested mode.
[ 18.953] (==) NVIDIA(0):
[ 18.953] (II) NVIDIA(0): Validated MetaModes:
[ 18.953] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 18.953] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 18.983] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 18.983] (--) NVIDIA(0): option
[ 18.983] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 18.983] (==) modeset(G0): RGB weight 888
[ 18.983] (==) modeset(G0): Default visual is TrueColor
[ 18.983] (II) Loading sub module "glamoregl"
[ 18.983] (II) LoadModule: "glamoregl"
[ 18.983] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 18.995] (II) Module glamoregl: vendor="X.Org Foundation"
[ 18.995] compiled for 1.17.1, module version = 1.0.0
[ 18.995] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.995] (II) glamor: OpenGL accelerated X.org driver based.
[ 19.024] (EE)
[ 19.024] (EE) Backtrace:
[ 19.025] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
[ 19.026] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fc93cef353f]
[ 19.028] (EE) 2: /usr/lib/libX11.so.6 (_XSend+0x2b) [0x7fc932e6a0bb]
[ 19.028] (EE) 3: /usr/lib/libX11.so.6 (_XFlush+0x15) [0x7fc932e6a575]
[ 19.028] (EE) 4: /usr/lib/libX11.so.6 (_XGetRequest+0x65) [0x7fc932e6d055]
[ 19.028] (EE) 5: /usr/lib/libX11.so.6 (XQueryExtension+0x4d) [0x7fc932e605ed]
[ 19.028] (EE) 6: /usr/lib/libX11.so.6 (XInitExtension+0x32) [0x7fc932e54392]
[ 19.028] (EE) 7: /usr/lib/libXext.so.6 (XextAddDisplay+0x4f) [0x7fc932c2338f]
[ 19.028] (EE) 8: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x5f3f7) [0x7fc93322c3d7]
[ 19.028] (EE) 9: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x804) [0x7fc93316ebf4]
[ 19.028] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 19.028] (EE) 10: /usr/lib/libEGL.so.1 (?+0x804) [0x7fc933417ef4]
[ 19.028] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 19.028] (EE) 11: /usr/lib/libEGL.so.1 (?+0x804) [0x7fc933418924]
[ 19.028] (EE) 12: /usr/lib/libEGL.so.1 (NvEglRegClientApi+0x4f36) [0x7fc933425866]
[ 19.028] (EE) 13: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x99) [0x7fc935930539]
[ 19.029] (EE) 14: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x29ce) [0x7fc935fc7e9e]
[ 19.029] (EE) 15: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
[ 19.029] (EE) 16: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
[ 19.029] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fc93cee0800]
[ 19.029] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
[ 19.029] (EE) 19: ? (?+0x29) [0x29]
[ 19.029] (EE)
[ 19.029] (EE) Segmentation fault at address 0x0
[ 19.029] (EE)
Fatal server error:
[ 19.029] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 19.029] (EE)
[ 19.029] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 19.029] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 19.029] (EE)
[ 19.031] (EE) Server terminated with error (1). Closing log file.
Output of command "lspci -k | grep -A 2 -i "VGA""
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Device d000
Kernel driver in use: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750 Ti] (rev a2)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3102
Kernel driver in use: nvidia
Output of command "modinfo nvidia"
filename: /lib/modules/3.18.6-1-ARCH/extramodules/nvidia.ko.gz
alias: char-major-195-*
version: 346.47
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm,i2c-core
vermagic: 3.18.6-1-ARCH SMP preempt mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp
In addition, in order to disable sddm I downloaded latest Arch linux installation CD (2015.02.01) but I was unable to start PC with this version. Loading stuck after first 3 lines, after "triggering udevevents".
I had old version 2014.08 and it worked ok.
Thanks,
AlexeyI just wanted to echo eugeneyche's comment. I ran the same steps mentioned by ElectricPrism but that didn't really fix them. I had to add nomodeset to my kernel parameters. I now want to know what's really going on. For the record, this was my backtrace:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): device Ancor Communications Inc ASUS VE278 (DFP-1) (Using
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): EDID frequencies has been enabled on all display
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): devices.)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0):
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0): will be used as the requested mode.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0):
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): Validated MetaModes:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (--) NVIDIA(0): option
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): RGB weight 888
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): Default visual is TrueColor
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Loading sub module "glamoregl"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) LoadModule: "glamoregl"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Loading /usr/lib/xorg/modules/libglamoregl.so
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Module glamoregl: vendor="X.Org Foundation"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: compiled for 1.17.1, module version = 1.0.0
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: ABI class: X.Org ANSI C Emulation, version 0.4
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) glamor: OpenGL accelerated X.org driver based.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Backtrace:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fad6053a53f]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 2: /usr/lib/libxcb.so.1 (xcb_writev+0x0) [0x7fad56046100]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 3: /usr/lib/libX11.so.6 (_XSend+0x19e) [0x7fad564b122e]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 4: /usr/lib/libX11.so.6 (_XFlush+0x15) [0x7fad564b1575]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 5: /usr/lib/libX11.so.6 (_XGetRequest+0x65) [0x7fad564b4055]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 6: /usr/lib/libX11.so.6 (XQueryExtension+0x4d) [0x7fad564a75ed]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 7: /usr/lib/libX11.so.6 (XInitExtension+0x32) [0x7fad5649b392]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 8: /usr/lib/libXext.so.6 (XextAddDisplay+0x4f) [0x7fad5626a38f]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 9: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x5f3f7) [0x7fad568733d7]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 10: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x804) [0x7fad567b5bf4]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) unw_get_proc_name failed: no unwind info found [-10]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 11: /usr/lib/libEGL.so.1 (?+0x804) [0x7fad56a5eef4]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) unw_get_proc_name failed: no unwind info found [-10]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 12: /usr/lib/libEGL.so.1 (?+0x804) [0x7fad56a5f924]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 13: /usr/lib/libEGL.so.1 (NvEglRegClientApi+0x4f36) [0x7fad56a6c866]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 14: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x99) [0x7fad58f77539]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 15: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x29ce) [0x7fad5960ee9e]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 16: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 17: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fad60527800]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 19: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 20: ? (?+0x29) [0x29]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Segmentation fault at address 0x0
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: Fatal server error:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Caught signal 11 (Segmentation fault). Server aborting
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: Please consult the The X.Org Foundation support
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: at http://wiki.x.org
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: for help.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Please also check the log file at "/dev/null" for additional information.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Server terminated with error (1). Closing log file.
Mar 09 19:57:56 dexter systemd-coredump[449]: Process 448 (Xorg) of user 0 dumped core
Maybe you are looking for
-
Problems with spaces in directory or file names and Word.exe
Hi I'm trying to open a file with Word from my java aplication, and I have a problem with some file/directory names. I have this String cmd = "c:\\Program Files\\Microsoft Office\\Office10\\WINWORD.EXE" + " " + path; try { Runtime.getRuntime().exec(c
-
Format question for a ABAP report
Hi experts, Exist a way to create or use a format to print an output of an ABAP report that adjust to the screen? I have a Abap report that in the output have some subtrees for the information displayed.... but if the user expand a lot the subt
-
Group policy error: Failed to open group policy object on this computer.
Hi all, I received this message when i tried to look at the local group policy setting on one of my machines (Windows XP SP3), which is joined in my domain. "Failed to open group policy object on this computer. You may not have appropriate rights. De
-
Problems setting up an iCloud email address
I want to set up an additional email address, an icloud.com address. But the checkmark next to Mail is already checked, because I am signed in with my Apple ID.
-
Only 147 photos are being shown on my photo stream with the new photos version
I've taken around 600 new photos the last two weeks. But on my photo stream album are only 147 photos being shown. How can I fix this problem? I've tried to turn and off photo stream. But nothing changed. I use photos Version 1.0 (209.52.0) on a mac