Unable to switch from 16 to 24 bit, and no Dolby select

Hello,? I have tried everything i could find to fix this but i'm at my witts end here. i just recently upgraded my computer from and A8V Delux motherboard so that i could go to PCI-e A8N-SLI Premium. Upon reformatting the Hard Dri've. i could not get the SPDIF to work correctly it'll let me switch from 48 to 96 KHz, and in the Bit Matching section it won't let me do anythign at all. i have links to the screen shots i took of the 2 windows in Audio Console, they are as follows.SPDIFhttp://img.photobucket.com/albums/v3...ight/SPDIF.jpgAnd? the Bit Matchinghttp://img.photobucket.com/albums/v3...itMatching.jpgI'm currently useing the Sound Blaster X-Fi Fatality Extreme Gamer Pro sound card. To show i have read up, i have switch? PCI slots and have even did a complete windows reapir and stil nothing. after searching here on the forum for the 3 days or so i haven't been able ot get them to work. any help? would be greatly welcomed.
?????????Thank You.

ok i installed winamp which uses 24bit audio when enabled, had the CAC set up for entertainment mode. and still could not get 24bit audio. i used SiSoftware Sandra Pro, and did a hardware test on my audio card. which is the Sb Fatality extreme gamer pro. andseachign through all the audio settings it only shows my sound card using 6bit audio. while playign MP3's through winamp. i have no cracking or popping noises just unable ot have 24bit audio coming from the sound card. any idea's. i have tried everythign that has been posted in this thread before i even made my first post to fix the problem. is this a known issue or something. cause it's ticking me off to have paid $45 for a good sound card and not get my 24bit audio and no dolby audio in games. And yes Sandra will show me if i am using 24bit audio as it did before i upgraded my motherbaord, and on my last sound card which was an audigy LS.Here is a link to the pict shows that the max sample bits is only 6http://img.photobucket.com/albums/v3.../soundtest.jpgMessage Edited by WyckedKnight on 0-20-200704:53 PM

Similar Messages

  • I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    Back up all data. Rebuild the mailbox.

  • Switched from iPhone to Android and now iMessage being sent instead of Text

    A friend of mine recently switched from iPhone to Android and now my text are being sent as iMessage instead of text and he obviously isn't receiving it. How do I fix this bug. I'm using iPhone 4 running iOS 5

    I apologize about the odd style but I'm using voice rec software.  I just got the Galaxy S five and I have this problem too after weeks of searching online I finally figured out the problem it is with iMessage even if you have your old phones imessage switched off. you have to get your friends to text you normally and send. If the text bubble shows up blue, press and hold choose option send as SMS or text and the bubble will change to green green means SMS blue is the iMessage so its up to the iPhone user to take literally a half of an extra step to send a text to you and if they don't do that then they're just jerks

  • I have iWeb '08 and just switched from Mobileme to GoDaddy and using Filezilla.  Now when I make changes through iWeb it doesn't actually publish to my desktop folder.  In fact, it doesn't publish at all but says that it did.

    I have iWeb '08 and just switched from Mobileme to GoDaddy and using Filezilla.  I also just upgraded to Lion.  Now when I make changes through iWeb it doesn't actually publish to my desktop folder.  In fact, it doesn't publish at all but says that it did.  How can I make changes in iWeb and publish to a folder?

    Choose the destination in the publish settings page as shown in the second example on this page...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html

  • I am looking to make the switch from pc to mac and have been eyeing the MBP 13". I would like to know whether it is fine to add RAM and SSD myself? any compatibility or warranty problems? what brand/type of RAM and SSD is the best fit? thank you.

    i am looking to make the switch from pc to mac and have been eyeing the MBP 13". I would like to know whether it is fine to add RAM and SSD myself? any compatibility or warranty problems? what brand/type of RAM and SSD is the best fit? thank you.

    Chamar wrote:
    I'm possibly wrong here but I suspect opening a brand new MBP to add parts yourself will void the warranty.  It is probably in the small print.  I certainly would not risk it for an expensive Apple product.
    Some (Windows) laptops have easy access to memory and disk slots that do not necessitate taking the complete back cover off.  However, Apple does not make life easy for you.
    However, if you are going for a 'used' machine it is probably worth a try.
    Not possibly, definitely wrong, Ram and Hard Drive are considered user replaceable and will not void the warranty if changed.

  • I just switched from Aperture to Lightroom and PS CC.  My images exported from LR and PS suffer color loss.  Where do I begin to correct this problem?

    I just switched from Aperture to LR and PS CC.  My exported images suffer color loss?  How do I correct the issue?
    I shoot with a Canon 5d Mark III in Adobe 1998 Color Space.  I've been exporting JPEGS for web with Color Space sRGB.

    Does your issue have anything to do with switching from Aperture?
    In other words, if you take a new photograph with your camera, and import it in Lightroom, then export it, is there still a problem?
    Or is the problem somehow tied to transition from Aperture, or photos migrated from Aperture...?
    I'm guessing the reason you brought up Aperture is that you did not have export "color loss" issues in Aperture, like you are having in Lightroom, but since you didn't say... (just want to be sure).
    ~R.

  • Switched from DSL to cable and now can't find apple tv in itunesdevice list

    I just switched from DSL to Cable and now for whatever reason I cannot find my apple tv in the itunes device list on my desktop computer. If I use another laptop through the same wireless router I can see the apple tv no problem. My apple tv can see my wireless router and connect to the internet and watch youtube/trailers/etc.
    I have tried restoring the apple tv, and have also tried uninstalling and reinstalling the itunes on the desktop. I also reset the wireless router...none of the above seem to work. any suggestions would be greatly appreciated as this has been crazy frustrating...thanks in advance.

    If you have an AirPort Extreme or a Time Capsule, you need to use the AirPort utility to access it. Otherwise, your router has a control panel that you can access by entering the router's IP address into your web browser. You'll have to check your router's documentation for the default login name and password, but it's often admin admin or root root (which is why you should at least change the password as soon as possible).

  • I am trying to switch from video to camera and when I push on the photo button, it remains on video.  I've tried turning it on and off, but that doesn't help.

    I am trying to switch from video to camera and when I push on the photo button, it remains on video.  I've tried turning it on and off, but that doesn't help.  Any suggestions?

    Tapping the words don't work in iOS 7. Just swipe up or down anywhere on the screen until the mode that you want to use appears in yellow type on the right side. Yellow type indicates the selected mode.
    Remember - swipe up or down to get to the mode that you want to use.

  • Switched from 9900 to q10 and a particular i cannot receive messages from a particular bbm pin

    switched from 9900 to q10  and a particular i cannot receive messages from a particular bbm pin
    the messages are not being delivered to me from a particular pin

    Can you send messages to that particular pin?
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • TS5185 I have a friend who switched from iPhone to Samsung and I am only one that has to turn off iMessage to send a text! I have deleted her then readded and nothing seems to work and she has turned off iMessage on her other apple devices. Is there a sol

    I have a friend who switched from iPhone to Samsung and I am only one that has to turn off iMessage to send a text! I have deleted her then readded and nothing seems to work and she has turned off iMessage on her other apple devices. Is there a solution!

    I have completely deleted twice! Deleted from iCloud contacts and windows contacts! Nothing has changed! Thanks for your idea!

  • I recently switched from PC to Mac and am able to find and transfer most of the larger files of music to iTunes, but there are about 750 songs that are held in sub-files that require me to dig in and transfer them one by one to iTunes.. I've tried transfe

    I recently switched from PC to Mac and am able to find and transfer most of the larger files of music to iTunes, but there are about 750 songs that are held in sub-files that require me to dig in and transfer them one by one to iTunes.. I've tried transferring the parent folders, but it doesn't seem to work.  Does anyone know of a more efficient way of getting iTunes to dig into the subfolders and transfer the music without me having to go one by one?

    There is a good general guide to switching from Windows to Mac at the following link that touches on moving music as well How to Move to a Mac - Get your stuff from your PC to your new Mac
    There are also these guides:
    How to move music between authorised computers
    Networking with a Windows PC
    Don't forget to deauthorise your old PC if you are disposing of it so you don't use up your 5 allowances: About iTunes Music Store Authorisation and Deauthorisation

  • How to store data from textfile to vector and delete a selected row.

    Can someone teach me how to store data from textfile to vector and delete a selected row. And after deleting, i want to write the changes in my textfile.
    Do someone has an idea? :)

    nemesisjava wrote:
    Can someone teach me how to store data from textfile to vector and delete a selected row. And after deleting, i want to write the changes in my textfile.
    Do someone has an idea? :)What's the problem? What have you done so far? What failed?
    What you described should be pretty easy to do.

  • Unable to switch from Windows Update to Microsoft Update

    On a new Windows 7 64 bit computer I am unable to access Microsoft updates. Windows update works fine, but when I click the link to get updates for other Microsoft Products it will only take me to the screen that tells me to use the start menu to check for
    updates. I have also tried other links to Microsoft Update from other Microsoft webpages and end up with the same result.
    I have Office 2013 Standard installed and activated, and from previous installation experience know that I should be able to access numerous updates through this method.
    To verify that I am able to install updates for Office I manually downloaded and installed one Office 2013 update through the Microsoft download site.
    How do I get this machine to switch to Microsoft Update?

    Hi,
    According to your description, I think you may had a misunderstand between these two updates installation. Here is a paragraph which talking about Use Windows Update to Check for Updates to other Microsoft Products:
    By default, Windows Update can download and install updates for Windows 7 and features that are part of the operating system (such as Internet Explorer). You can also merge the functionality of Microsoft Update—a service for managing updates to Microsoft
    Office and several other Microsoft products—into Windows Update so that you no longer need to visit Office Online to get updates.
    If you do not already have Windows Update integrated with Microsoft Update, you will see the message “Get updates for other Microsoft products” on the Windows Update home page. To enable checking for other products, click the Find Out More option shown beside
    this message. This will take you to the Microsoft Update site for some quick installation steps. You only need to do this once. Thereafter, the Windows Update home page will indicate that you receive updates “For Windows and other products from Microsoft Update.”
    From: http://technet.microsoft.com/en-us/magazine/ff642466.aspx
    Hope this helps. If you need further assistance on this particular issue or any other Windows related issue, let us know and we will be glad to assist you.
    Roger Lu
    TechNet Community Support

  • Switched from Podpress to Powerpress and now feed is not updating in iTunes - Please help

    Please help...at my wit's end!
    A few days ago I switched from using Podpress to Powerpress for my podcast. I followed all instructions and my feed appears to be valid. However, my podcast is not updating in iTunes at all and when I tried to resubscribe, I got an error message that said that there are no playable episodes.
    Please, please...someone help. I really don't know what else to do and trying to get support from Apple or Blubrry has been fruitless.
    My feed is: http://www.surrealla.com/feed/podcast/
    Thank you!

    Hi Roger,
    Well, I was unable to locate the old feed (I don't even know if it exists in the conventional way, since it was set up by Podpress), and attempted to remove my podcast completely from iTunes in order to start fresh. Unfortunately, it appears as though iTunes no longer does this and instead directs you to add a <block> tag to your feed....and around we go.
    So I've pleaded via Express Lane to please, please have someone change my feed to the new http://www.surrealla.com/feed/podcast/ ...that old feed should have never been set up that way in the first place. Argh.
    Question: Can I resubmit my podcast to iTunes without deleting the old one? I'd hate to do that...seems tacky...but I have no idea what else to do if the pleading doesn't work.
    Thank you again - you've been so helpful!

  • Logic error in rotating a bot towards a target (switch from -180 to 180 and vice versa causes error)

    Hi,
    I am making a Bot class. This function rotateTo makes the bot rotate towards some coordinates, xTarget and yTarget.
    There are two targetRadians lines because it is easier to read for me.
    The target radians shows the angle of the target from the bot where the bot angle is this.angleRot.
    if the bot-angle minus the target-angle (it says in radians but is actually in degrees) is less than 0 it turns right and if it is greater than or equal to 0 then it turns left.
    public function rotateTo(xTarget, yTarget):Void {
                        targetRadians = Math.atan2(yTarget-this.yPos, xTarget-this.xPos);
                        targetRadians = Math.round(radiansToDegrees(targetRadians));
                        trace(targetRadians);
                                  if (this.angleRot-targetRadians<0) {
                                            turnBot(5);
                                  } else {
                                            turnBot(-5);
    This basically works. The bot rotates towards the target at 5 degrees per frame.
    The angle setup is that if the target x, y is below the bot x, y, the target angle is about 90, if it's to the right its about 0, if its above it's about -90 but as the angle is decreased to -180 from above to the left of the bot, when it goes below the bot (and to the left) the target angle switches to 180.
    So something like: with the bot in the middle and the target being located at one of the numbers;
              -90
    -180               -1
    180               1
               90
    The fact the target angle switches from -180 to 180 or 180 to -180 confuses the bot and the bot decides to turn ALL the way the opposite direction BECAUSE;
    if the bot angle is 160 and target angle is 175, the bot angle increases because target is greater than bot angle. If the target angle changes to -180, bot angle decreases even though it's more efficient to change from 160 to -180 through increasing the bot angle as at 180 it changes to -180. I just cannot work out the logic to use to make this work though.
    Any suggestions? Thanks.

    Hey I got it to work finally:
    public function rotateTo(xTarget, yTarget):Void {
                        targetRotation = Math.atan2((yTarget-this.yPos), xTarget-this.xPos)*180/Math.PI;
                        if (this.angleRot-targetRotation>180) {
                                  this.angleRot -= 360;
                        } else if (this.angleRot-targetRotation<-180) {
                                  this.angleRot += 360;
                        if (this.angleRot-targetRotation<0) {
                                  turnBot(5);
                        } else {
                                  turnBot(-5);
    so basically I added a couple of if statements before the main business.... I don't really have a coherent explanation for the fix but it works!

Maybe you are looking for