Unable to sync with nano

Hi. First time using ipod or itunes.
Synced my nano with my pc. Songs I got from my cd's transferred without a problem. However, it won't let me sync the songs I purchased from itunes. Gives me an error saying that it is not authorized on this computer.
What am I doing wrong?
Thanks.

Did you actually authorize your purchases on that computer? Authorization is triggered by playing the song for a few seconds in iTunes on your computer.

Similar Messages

I purchased a new computer with windows 8 and unable to sync with itunes

I am unable to sync with itunes, since getting Windows 8

Check this article about syncing to a new computer:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
If you just updated Windows, did you make sure to have the latest updates for your computer?
Did you try to reinstall iTunes and all related Apple software?
Also check this article again:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues

HT4623 just purchased iphone 5 and unable to sync with itunes or icloud- help...

Just purchased iphone 5 and unable to sync with itunes or icloud. when I connect to itunes it says i need itunes 10.7 or later. I've updated itunes and still getting same message. suggestions appreciated

What is your Computer and which operating system is it running...
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download)
From Here > http://www.apple.com/iphone/specs.html

Unable to sync with SharePoint task list

Unable to sync with SharePoint task list
The SharePoint site is invalid - I can hit the site just fine through IE
- The SharePoint site is unavailable. Not so since I can naviagte to it just fine with IE
- The user does not have full or design permissions in the SharePoint site -- My permission level is "Full Control"
All inside a corporate Lan. This is a first time setup? Any ideas?

Hi
If you open up the project file from within the sharepoint list and then click sync what happens?

Unable to sync with MacBook Pro even after installing Po...

Unable to sync with MacBook Pro even after installing PocketMac

why don't you post the same thing again (since you posted it 3 times already)?
perhaps whole you're at it you could post some useful information to get advice like Mac OS, Device, Device OS, other sync software installed...
4.6.1.305 hybrid
Mac Pro 2X2.8 Quad SL

I am unable to sync with my computer, I get a message ; This iphone cannot be used because the Apple Mobile Device service is not started.e

I am all of a sudden unable to sync my iphone with my computer. I get the following error message: This iphone cannot be used because The Apple Mobile Device service is not started.

my iphone with my computer
Windows?
Instructions here > iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

HT1386 I get error code 1156 when attempting to sync my iPad. It says iTunes unable to sync with an unknown error

When trying to sync my 1st generation iPad I get an error message stating that iTunes was unable to sync due to an unknown error (1156). Any suggestions on how to deal with this are greatly appreciated.

iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom
Message was edited by: Texas Mac Man

IPhone 5 unable to sync with iTunes Macbook 2007

I have the Macbook 2007 laptop, and I am unable to update my itunes because i am not running Mac OS C 7 or higher. I am not going to get a newer laptop because my new iphone will not sync with my old data, and I have photos that I do not want to lose that was backed up. Please tell me what I could do. Thank you.

I'm having the same problem. I understand what the system requirements are, but I simply didn't notice them when I ordered the phone.
At any rate, I called Apple today and ordered Snow Leopard. It's a barely newer version of an old operating system ... but it should do the trick. Snow Leopard is 10.6 and you can download the 10.6.8 update on Apple's site once SL is installed.
After I receive the DVD in the mail (really? no download? ridiculous...) I'll install iTunes 10.7 and all should be well. Until then, my iPhone 5 will just be a paperweight.
Good luck!

Unable to Sync with Office 2010 / Outlook 2010

With the semi recent release of Office 2010, and the availability of the Office 2010 beta for about the last year... Unfortunately there has not been a method added to iTunes to support these calendar or contact types.
Any info on this topic would be great. If there is a beta patch available, I would be willing to test it without the fear of being unable to recover a backup of my outlook.pst file.
Thanks for any assitance.

I have a solution that seems to fit globally...
When you download and install Office 2010, you have 3 choices that you may not be aware of: 32-bit, 64-bit, click-to-run.
32-BIT
The 32 bit version is your typical office installation. You need to download the installer and let Office integrate with your system, just like every version to this point has done. This works with iTunes.
64-BIT
I haven't heard anything good about this version yet. Reports say it won't allow syncing with iTunes and various other plugins. Installation works the same as the 32 bit version.
CLICK-TO-RUN
This is a new installation method devised by Microsoft.
http://blogs.technet.com/b/office2010/archive/2009/11/06/click-to-run-delivering -office-in-the-21st-century.aspx
It essentially runs Office as a virtualization on a new Q drive. That means there are no EXE files for iTunes to find. Also, iTunes will not be able to locate a default mail program, even though you have Outlook set as such.
Download time is hugely faster with C2R and updates are seamless. Kinda big brothery to me. If you want to reinstall office with a full, true version, log into your MSN account with the account you used to purchase the software, click my account, click download next the the product you purchased, then click Advanced Options and select the 32-bit version. You will need to uninstall Office 2010 before attempting a new install.
Hope this helps.

IPhone 3G unable to sync with Mac.

My iPhone 3G running 3.0 is unable to sync or charge with my MacBook Pro.
The phone will sync alright with any other computer in the house, just not this one. I have tried uninstalling, then reinstalling iTunes. It most definitely isn't any of the USB ports on the computer, all other USB devices work perfectly. The phone will only show up in iTunes when put in DFU mode. When attempting to restore the phone in DFU mode it downloads OS 2.2, During the restore it later gives me a restore error message (20).
I then tried to restore the iPhone 3G on one of my Windows machines, it worked, it installed 3.0 as opposed to 2.2.
When trying to plug it into the MBP again, it's a no go. I just don't get it, it worked just fine until I decided to backup my phone yesterday, it never would show up in iTunes. The phone shows up in system profiler under USB. The phone also seems to charge and sync during the startup of the computer but then just cancels as if never connected.
I'm also running the latest version of iTunes and OS X.
Any type of help would be greatly appreciated!

Hi,
Try resetting the SMC on the MacBook Pro as described here: http://support.apple.com/kb/HT1411
If the issue persists, it may be related to a 3rd-party software. You can generally disable the software causing the conflict by logging into another user account or temporarily moving the /Macintosh HD/ Library/StartupItems folder, as described here: http://support.apple.com/kb/HT2602
If there is a conflict, you'll want to contact the software vendor for updates, uninstalling or troubleshooting tips.
-Jason

Unable to sync with computer. does not recognize Iphone and wants me to restore factory settings. Tried restoring several times in past but problem persists.

Unable to sync iphone4. iphone not recognized. wants me to restore factory settings. I've done that several times and problem persists.This has been an issue sunce buying the phone.

Hello @dazegoneby,
I understand that your HP Pavilion p6-2220t Desktop PC running Windows 7 used to connect to your home network without an issue, but recently it does not recognise the network. I am providing you with an HP Support document: Troubleshooting Your Wireless Network and Internet Connection (Windows 7), which has steps to help resolve issues such as this. Now I am not recommending that you do the step that asks you to reset up your router as you have other devices that are working fine so that would not be the issue.
If the above document does not resolve your issue could you please re-post with either a screen shot of your Device Manager showing what is listed in Network Adapters or re-post with which wireless card you have.
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

BB Connection issue : Unable to sync with network ...

Hi,
A few months ago I upgraded my router and associated components and posted here to get the lines stuck IP profile refreshed. After that was performed everything was great up until the 30/4/13 when a power cut occurred around midday. Since this date my router has been trying to to sync with the exchange with no success and has reported the adsl link is down after every attempt.
I have tried the following troubleshooting steps: (Router is a Billion 7800n connected to the master socket)
* Power cycled the router
* Performed a factory reset on the router
* Tried connecting via the engineer's test socket
* Tried bypassing the fitted BT accelerator plate
* Tried a different adsl filter between router and master socket
* Checked adsl filters are still present/connected on any other connected comms equipment
* Checked for noise problems on the line (none found)
All above steps did not make any difference the router still attempts to sync and reports the adsl link as down.
The only step I have been unable to perform is testing with another router (the 8 year old home hub gave up the ghost a long time ago). I have borrowed a BT 2wire router from work and will hopefully be able to test if the problem is my router this evening.
After a busy weekend I finally got round to contacting the helpdesk yesterday evening who performed some tests and couldnt find a fault. They escalated the issue to 'level 2' and I was told I would get a call from them between 8.45-9.45 pm yesterday evening, surprise surprise no call was received so I have come here for help as this forum was so helpful before.
Thanks
Solved!
Go to Solution.

I tried the 2wire router yesterday evening and it behaved exactly the same as my router. About an hour later BT finally rang me (better late than never i suppose) and after I explained the trouble shooting steps I had taken they confirmed that there is a fault with the line and an engineer visit was booked for today.
I received a call from an openreach engineer today who I suspect was at the exchange who asked me to confirm if the router was now sync'ing, after I advised him that it still was not he confirmed that the power outage had knackered some of the equipment in the exchange which was why I was unable to sync. He advised that an appointment had been made to swap out the faulty kit which would take place around midnight either tonight or tomorrow.
So now hopefully its just a case of waiting 24/48 hours for service to be restored.

Unable to Sync with iPhoto albums

Using iTunes 6.01 and iPod Video I wish to sync with iPhoto (5.04) albums.
In iTunes Preferences/iPod/Photos I have selected the Synchronize photos from iPhoto but am unable to select an album (Copy selected albums only is grayed out and no albums appear in the selection box). iPhoto operates OK and photos are stored on external firewire drive.
Does anyone have any ideas?

Not sure if you are still having this problem, but I think the issue might be corrupt or malformed data being written by iPhoto to the albumdata.xml file in your iPhoto library folder.
One common cause of this is having an ampersand in a keyword (e.g. "vacations & travel") and then using the keyword in a smart album. Having an ampersand in a folder in the Finder path where your library is located can also cause this, as can keywords that use foreign character encodings.
The quick way to find out the offending corrupt data is to download iPhoto Library Manager (http://homepage.mac.com/bwebster/iPhotoLibraryManager.dmg) and then point it to your iPhoto library folder. The album column will tell you the line number of the malformed data in the XML file, and then you can open the XML file, locate the line number and see what item is causing the issue. If it is a keyword, just open iPhoto and delete it. If it is a caption or other text, delete or rename in iPhoto. Do not edit the albumdata.xml file directly, as this file is automatically generated by iPhoto and any changes you make will be overwritten. (more detailed steps on troubleshooting this issue is at http://homepage.mac.com/bwebster/Documentation/iPLM/pgs/albumdata.html)

Unable to sync with Palm Desktop

Here's my problem. I haven't been able to sync with my elderly Palm IIIC for about 2 years. Now my daughter gave me her Palm Zire 31. All my data are in my Palm Desktop on my iMac G5. Somewhere along the way I tried using iSync and got a bunch of stuff in my Mac address book. So I did a hard reset on the Palm Zire 31, then successfully hot-synced on my G5. But my nice address from my Palm Desktop file isn't coming over, just the crummy one from the Mac address book I think. My Palm Desktop address file has all the names in categories etc. I have tried making sure I have the correct conduits for syncing with the Palm desktop, and I tried telling the Sync operation to override with the Mac contents. I just want to move all my address data from my Palm Desktop on my Mac to the Zire. Any help here?

If you want to move all of the address data from your Palm Desktop to your handheld organizer, there is only one way to do it: using the Palm-supplied conduits to do so, not iSync and it's built-in iSync Palm Conduit. The transfer of all of the data from the Palm Desktop, including categories, simply is not supported by iSync or the iSync Palm Conduit.
The Missing Sync for Palm OS is an alternative, but you have to plan carefully how you do this, as you must first move the data from the Palm Desktop to either your device—or, through an export/import process—directly into both iCal and the Address Book. iCal task data doesn't survive this process, only calendaring data. In either event, categories don't transfer.
You'll have to perform some manual categorization on both your device and in the Address Book, and iSync will not support these changes. It won't reverse or otherwise modify them, it simply won't synchronize them. This is the case because you must overwrite the data on your handheld the first time you use the Missing Sync for Palm OS to synchronize.
The Missing Sync for Palm OS will, but only when using Mac OS X 10.4.4 or later, and an advanced Palm device with Palm OS 5.4 or later on board, as I recall. Only the Z22 would qualify, if that contention is true. Here is a list of Palm OS versions tied to specific handheld devices:
http://kb.palmone.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=69,E=0000000000412440418,K=2 589,Sxi=8,useTemplate=Case.tem,CASE=10714
My Treo 600, with Palm OS 5.2.1, does not qualify as an advanced device and does not support categorization in the same manner as later devices do.

IPhone 4 iOS 6.0.1 upgrade issues; back-up won't load and unable to sync with iTunes

I've just updated my iPhone4 to iOS 6.0.1 and went through the back-up routine. The back-up routine appeared to partially update, displaying an error, however has brought through my contacts, previous messages and has even maintained my bluetooth connection with the car. The phone appears to function ok although it will now not sync with my iTunes and so will not download music and Apps to the phone. I've tried to re-run the back-up however it just hangs with a message box advising that it is 'Estimating time remaining', a message that just hangs there for ages with no apparent actions (by ages I mean 15 minutes +).
Any advice would be much appreciated; to say this is extremely frustrating is an understatement.
Many thanks.

Hello, having the same problem, but the answer by KiltedTim is too simplistic. Butcher60, any news? I have tried removing everything, still the same. It is true that Vista fails loading the driver, but, in my case, I noticed that:
- if you reboot the sistem, the first time you connect any ios device, it is detected either by vista and by itunes. BUT if you disconnect it and connect it again, or connect another ios device, it is not detected enymore, neither by vista nor by i tunes, and you get the message, in managing resources, that the drivers of Apple mobile devices cannot be initialized (code 37)!!! This is so bad when you are doing an update (it is what happened to me), because, if you connect the device the first time, and then start the update, when reaching the point in which the device reboots, it is like connecting it for the second time, itunes does not detect it, and the device goes in recovery mode, so you must use another computer (with XP no such a problem, it seams) to complete it.
- BUT the problem is not only by vista, something happend with itunes 10.7, because I went back to a recovery point before itunes last version, and the driver are loaded by vista every time, only when using itunes 10.7 the same error occurs, and I did not find any solution (because downgrading itunes is not possible)
So, vista worked detecting ios devices before ios6 and itunes 10.7, it works without itunes 10.7 detecting every device, but it does not work with last i tunes. Can someone do something???

Unable to sync with nano

Similar Messages

Maybe you are looking for