Unable to uninstall sql server 2012 from Windows 7(ultimate) 64-bit SP1 version.

I am trying to install sql sever 2012 on my m/c but it's giving me error after partial installation.
Now I have successfully installed Sql Server 2008 R2 on my machine but when I am trying to uninstall 2012 sql server from my machine its giving an error regarding unsupported OS. However as mentioned earlier I have Windows 2007 Ultimate SP1 (64-bit) installed
on my machine which is included in valid platform for sql server 2012. Also I installed visual studio 2013 on my machine but it existed with error SqlServer\LocalDB not installed.

Hi pritamk,
According to your error message, as other post, you can uninstall SQL Server from command line, inaddition, another workaround is that change the compatibility mode of setup.exe to Vista SP2, then run “Remove” option from the control panel. You can refer
to the following steps.
Browse to your SQL setup bootstrap folder, For SQL Server 2012, this is the path "C:\Program Files \Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\".
Go to Setup.exe file and right click on Setup.exe. Then go to properties and click on "Compatibility" tab. Under "Compatibility mode", click on Run this program in compatibility mode for "Windows Vista (Service Pack 2)". Then Click on "Apply" then "OK".
After that go to control panel -> Programs and Features -> and remove SQL Server 2012
There is similar issue about uninstalling SQL Server 2012 RC0 from control panel. You can review the following post.
https://connect.microsoft.com/SQLServer/feedback/details/707706/unable-to-uninstall-sql-server-2012-rc0-from-control-panel
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Similar Messages

Unable to install SQL Server 2012 on windows 7 os

Hello All,
I am trying to install SQL Server Enterprise evaluation edition sp1 on windows 7 os professional edition.
Previously I have used to sql server 2012 enterprise evaluation edition on the same os. I did not have any issues at that time.
But now, I formatted my system and re-installed the same operating system. But now it is showing the below error to me when i tried to install sql server on my system.
Please help me.
Thanks in advance.
Thanks and Regards, Readers please vote for my posts if the questions i asked are helpful.

Hello,
This is a known issue. Please try the workarounds posted on the following link:
https://connect.microsoft.com/SQLServer/feedback/details/707706/unable-to-uninstall-sql-server-2012-rc0-from-control-panel
Look at the Workarounds section.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Cannot uninstall sql server 2012 on Windows 7

This is the error a co-worker gets when trying to uninstall SQL Server 2012. She is running Windows 7 Professional
Service Pack 1, 64 bit OS. She had SQL 2008 installed and then installed 2012 Enterprise as well, because she needed it for a project. The problem is we don't have a license for local instances of Enterprise, so we need to install it. However,
2012 Setup is telling us we don't have the minimum requirements to *install* 2012. Which leads to some interesting questions:
1) Why does the 2012 installer allow you to install but not uninstall when you don't meet system requirements?
2) How does that make any sense?
3) Does she really need to install more software to be able to uninstall? Since SP1 is already installed, what would that be?
Thanks!
Joe

Hello,
In theory, if Windows 7 has SP1 then it is compatible with SQL Server 2012.
Please try to use the procedure explained on the following article:
http://msdn.microsoft.com/en-us/library/ms143412.aspx
If that article does not help, please perform the following steps to manually uninstall SQL Server 2012:
1. Uninstall all SQL Server 2012 components you can using Control Panel -> Programs and Features
2. Backup the registry.
3. Delete the following keys in regedit:
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
6. Rename all the SQL Server folders in the computer like
C:\Program Files\Microsoft SQL Server and subfolders.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Connect SQL Server 2012 from Windows Server 2003 with native client 9.0

Hi,
I currently have a setup where ETL tool Ab Intio, running on a Linux server, connects to the SQL Server 2005 through a passthrough Wintel server with Windows Server 2003 OS using SQL server native client 9.0
Now I have the requirement to upgrade the SQL server from 2005 to 2012.
My question is, will it be possible to connect to SQL server 2012 through Windows Server 2003 with native client 9.0?
As per the specs, I need native client 11.0+ to fully support SQL Server 2012, but then, as per specs, native client 11.0 doesnot run on Windows server 2003. OS upgradation is currently not on the cards.
So will it be possible to the run the basic queries we use currently, if we can connect SQL server 2012 through Windows Server 2003 with native client 9.0/10.0, without updgrading the OS of the Wintel server?
Thanking you in advance!

Hi Soumya,
Yes, you can use the SQL Server Native Client shipped with SQL Server 2005 to connect to a SQL Server 2012 instance, and there is no need to upgrade the operating system.
Regards,
Mike Yin
TechNet Community Support

Unable to install SQL server 2012 on windows 7 64bit

Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2057043966
Exit facility code: 1380
Exit error code: 2
Exit message: There was a failure to calculate the applicability of setting ALLINSTANCES.
Start time: 2015-03-17 21:43:13
End time: 2015-03-17 21:43:34
Requested action: LandingPage
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x4F2D2386%400xE9BC3D64&EvtType=0x4F2D2386%400xE9BC3D64
Machine Properties:
Machine name: ELKR-1214-1745
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\afaeb7739e47ceedb4b5f79a1e14a784\x64\setup\
Installation edition:
User Input Settings:
ACTION: LandingPage
CONFIGURATIONFILE:
ENU: true
HELP: false
INDICATEPROGRESS: false
QUIET: false
QUIETSIMPLE: false
UIMODE: AutoAdvance
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150317_214254\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException
Message:
There was a failure to calculate the applicability of setting ALLINSTANCES.
HResult : 0x85640002
FacilityCode : 1380 (564)
ErrorCode : 2 (0002)
Data:
SettingId = ALLINSTANCES
WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException@2
HelpLink.EvtType = 0x4F2D2386@0xE9BC3D64
DisableWatson = true
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.CalculateAllSettings(Boolean chainerSettingOnly)
at Microsoft.SqlServer.Configuration.SetupExtension.FinalCalculateSettingsAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingChangeabilityException
Message:
There was a failure to calculate the changeability of setting ALLINSTANCES.
HResult : 0x85640003
FacilityCode : 1380 (564)
ErrorCode : 3 (0003)
Data:
SettingId = ALLINSTANCES
WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingChangeabilityException@3
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateChangeabilityByUser()
at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallQueuedSubscriberDelegates()
at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.Publish(Publisher publisher)
at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.UnableRetrieveConfigObjectForSettingException
Message:
Unable to retrieve a public configuration object type Microsoft.SqlServer.Configuration.SetupExtension.SlpInputSettings for setting ALLINSTANCES.
HResult : 0x85640007
FacilityCode : 1380 (564)
ErrorCode : 7 (0007)
Data:
SettingId = ALLINSTANCES
ConfigObjectType = Microsoft.SqlServer.Configuration.SetupExtension.SlpInputSettings
WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.UnableRetrieveConfigObjectForSettingException@7
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.SettingBridge.GetHostingObject()
at Microsoft.SqlServer.Chainer.Infrastructure.SettingBridge.ChangeabilityByUser()
at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallFunctionWhileAutosubscribing[T](SubscriberDelegate subscriberDelegate, Int32 priority, AutosubscribingFunctionDelegate`1 function)
at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateChangeabilityByUser()
Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.ChainerInfrastructureException
Message:
Unable to generate a temporary class (result=1).
error CS0009: Metadata file 'c:\Windows\assembly\GAC_MSIL\System\2.0.0.0__b77a5c561934e089\System.dll' could not be opened -- 'File is corrupt'
HResult : 0x84b10001
FacilityCode : 1201 (4b1)
ErrorCode : 1 (0001)
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.DeserializeObject(String rootPath, Type type, String elementXPath)
at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.DeserializeObject(String rootPath, Type type)
at Microsoft.SqlServer.Chainer.Infrastructure.SettingBridge.GetHostingObject()
Inner exception type: System.InvalidOperationException
Message:
Unable to generate a temporary class (result=1).
error CS0009: Metadata file 'c:\Windows\assembly\GAC_MSIL\System\2.0.0.0__b77a5c561934e089\System.dll' could not be opened -- 'File is corrupt'
Stack:
at System.Xml.Serialization.Compiler.Compile(Assembly parent, String ns, XmlSerializerCompilerParameters xmlParameters, Evidence evidence)
at System.Xml.Serialization.TempAssembly.GenerateAssembly(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, Evidence evidence, XmlSerializerCompilerParameters parameters, Assembly assembly, Hashtable assemblies)
at System.Xml.Serialization.TempAssembly..ctor(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, String location, Evidence evidence)
at System.Xml.Serialization.XmlSerializer.GenerateTempAssembly(XmlMapping xmlMapping, Type type, String defaultNamespace)
at System.Xml.Serialization.XmlSerializer..ctor(Type type, String defaultNamespace)
at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.DeserializeObject(String rootPath, Type type, String elementXPath)

Hi,
I would like to add that if you see summary.txt file you would see
Message:
Unable to generate a temporary class (result=1).
error CS0009: Metadata file 'c:\Windows\assembly\GAC_MSIL\System\2.0.0.0__b77a5c561934e089\System.dll' could not be opened -- 'File is corrupt'
HResult : 0x84b10001
FacilityCode : 1201 (4b1)
ErrorCode : 1 (0001)
You can see file is corrupt. So either you have to download the setup file again or there can be chance that Antivirus caused some issue.
Plus if you see starting of summary.txt you could see
Requested action: LandingPage
The error message came while landing page was being loaded/or was in action so again I think it is some thing related to corrupt media or antivirus.
Please
1. Download ISO file again and extract using WINRAR, don't use Winzip
2. Disable Antivirus.
3. Make a new folder and extract installable there.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Unable to install SQL Server 2012 on Windows 8.1

hi Gurus,
I have been trying to install SQL 2012 and unable to do that! I have done it before on another laptop and I am really not clear why it is not working now.
Toshiba
64 bit
Windows 8.1
12 GB memory
thanks in advance
ebro

hi Gurus,
I have been trying to install SQL 2012 and unable to do that! I have done it before on another laptop and I am really not clear why it is not working now.
Toshiba
64 bit
Windows 8.1
12 GB memory
thanks in advance
ebro

Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS

Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.

Hi,
    I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2053898239
Start time:                    2015-02-08 23:03:01
End time:                      2015-02-08 23:07:31
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS:        Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS:            Use the following information to resolve the error, and then try the setup process again.
Next step for RS:              Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine:       Use the following information to resolve the error, and then try the setup process again.
Next step for FullText:        Use the following information to resolve the error, and then try the setup process again.
Next step for Replication:     Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name:                  RLC_WORK
Machine processor count:       4
OS version:                    Future Windows Version
OS service pack:
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered Configured
SQL Server 2012
Client Tools Connectivity                1033
11.2.5058.0     No         Yes
SQL Server 2012
Client Tools Backwards Compatibility     1033
11.2.5058.0     No         Yes
SQL Server 2012
Client Tools SDK                         1033
11.2.5058.0     No         Yes
SQL Server 2012
SQL Server Data Tools                    1033                 Express Edition
11.2.5058.0     No         Yes
SQL Server 2012
LocalDB                                  1033
Express Edition      11.0.2100.60    No         Yes
Package properties:
Description:                   Microsoft SQL Server 2012
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
Installation location:         C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition:          Express
Slipstream:                    True
SP Level                       2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title:                         Service Pack 2
Knowledge Based Article:       KB 2958429
Version:                       11.2.5058.0
Architecture:                  x64
Language:                      1033
Update Source:                 Slipstream
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      true
AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Disabled
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  MULTIDIMENSIONAL
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    true
ENU:                           true
ERRORREPORTING:                true
FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD:                 <empty>
HELP:                          false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SQLEXPRESS
INSTANCENAME:                  SQLEXPRESS
ISSVCACCOUNT:                  NT AUTHORITY\Network Service
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          AllFeatures_WithDefaults
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           RLC_WORK\Robert
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  true
TCPENABLED:                    0
UIMODE:                        AutoAdvance
UpdateEnabled:                 true
UpdateSource:                  Slipstream
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature:                       Management Tools - Complete
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Reporting Services - Native
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Full-Text and Semantic Extractions for Search
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?

Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li

Unable to install SQL Server 2012 Developer

I have a problem with installing SQL Server 2012 (no matter which edition I choose). Installation usually runs well, but near the end shows up an error:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
BUTTONS:
OK
The help link points to not-existing article on MSDN page. After I click OK button, the installation reaches it's end and shows up another, which tells, that Database Engine Services, Reporting Services - Native, Data Quality Services, Full-Text and Semantic
Extractions for Search and SQL Server Replication failed to install.
After that I am able to start, for example SQL Management Studio, but cannot connect to database. Also services of SQL Server (Server, Server Agent, Full-text Filter, Reporting Services) are stopped and I am not able to start them manually (any try throws an
error: "The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details").
I tried complete reinstalling of SQL Server, cleaning registry entries, different editions of that software - none method helped. Also, I tried the .iso images of installation media on other computers - it worked well and installed without any errors. My OS
is Windows 8.1 x64.

Hello,
Please uninstall SQL server completely from add remove program.Make sure you uninstall it completely
Now right click on Setup.exe file which is there in SQL Server installable and select run as administrator to start installation.
On page where you are asked to provide startup account for SQL Server service select NT Authority\System or Local System account.
This issue is basically after installation SQL Server is not able to bring online database services using account which you selected .Local system account will allow it to come online
After installation change startup account to domain account with least privilege
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Uninstall SQL Server 2012 in Command Prompt

I need to make an uninstall script for SQL Server 2012 Express but I can't figger it out.
After I uninstalled the SQL instance with following command:
C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\setup.exe /Action=Uninstall /FEATURES=SQL,AS /INSTANCENAME=SQLEXPRESS /QUIETSIMPLE
There are still a couple of programs that I want to remove:
Microsoft SQL Server 2008 Setup Support Files
Microsoft SQL Server 2012 Transact-SQL ScriptDom
Microsoft SQL Server 2012 Native Client
SQL Server Browser for SQL Server 2012
Microsoft VSS Writer for SQL Server 2012
Microsoft - SQL Server 2012 Express
Microsoft SQL Server 2012 Setup (English)
Can someone please help me removing them without using 'Add or Remove Programs'
and preferably without any interaction.

Hi Michael1105,
Are there any other instances except SQL Server Express in your system?
To completely uninstall SQL Server Express include the Browser, Writer and other SQL Server components, I recommend you use the
ConfigurationFile.ini file. Below is an example for you.
Firstly, you can perform the following steps to generate a configuration file.
1. Right click SQL Server 2012 from control panel and select Remove
2. Follow the wizard through to the Ready to Remove page. The path to the configuration file is specified in the
Ready to Remove page in the configuration file path section.
3. Cancel the setup without actually completing the uninstallation, to generate the INI file.
Secondly, you can specify the configuration file at the command prompt and uninstall SQL Server 2012 Express, or you can change the scripts in configuration file to meet your requirement, then copy the scripts
in command prompt to uninstall SQL Server 2012 Express.
Reference:
Install SQL Server 2012 Using a Configuration File
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Need help installing sql server 2012 on windows server 2012 core

Hi Guys
I am having trouble installing sql server 2012 on windows server 2012 core. I am doing this on VM and my VM is not connected to internet.
This setup is part of preparing lab for sql serve exam 70-462. I would really appreciate your help.
I am including the links to the log files that were generated after installation. There are following 2 files
Component Update and
Detail_Global_Rules
Thanks

Hi
iworkonline,
Regarding to your original question, you can work around it according to Prashanth’s post or unclick the “Include SQL Server Product Updates" checkbox when installing SQL Server on your VM.
Regarding to your second question, I make a test using TechNet Virtual Lab and everything works as expected . Below are my steps.
1. Choose Web client after laughing the Lab.
2. Choose SQLONE machine and “OPEN CHARMS” as follows, then search SQL Server Management Studio, use it to connect to the default instance (which has been installed in the lab).
From your description, you get error message “Device not ready”. Could you please post more details? Are you installing SQL Server 2012 on the TechNet Virtual Lab?
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Itunes 10 Hangs When Started On Windows 7 Ultimate 64 bit - Sp1 Beta 178

Hi
Itunes 10 hangs when started on Windows 7 Ultimate 64 bit - Sp1 Beta 178
I have tried following things :
-Scanned for Virus + SpyWare
-Scanned for Corrupted System Files
-Scanned for Errors in registry
-Cleaned up items that startup with windows
-Installed latest Ati Catalyst 10.8 Drivers
-Checked settings in Itunes Version 10
My Mobile Model :
Apple Iphone 3gs 16 Gb
My Hardware and software :
HP Pavilion m9660sc PC
Intel Core I7 980X 3.33 Ghz
DDR3 PC2-8500 6 Gb Memory
HDD WDC WD10EADS-65L5B1
DVD-RW TSSTcorp TS-H653Z
LG L225WT Size 22 Screen
AMD Radeon HD 4850 1 Ghz Memory
Mainboard Pegatron Intel X58 Express
Windows 7 Ultimate 64 bit
Windows 7 Service Pack 1 Beta 178
Adobe Reader 9.3.4 - Norwegian
Spotify Version 0.4.7
Microsoft Security Essentials 2.0 Beta
Personal Ancestral File 5
Java(TM) 6 Update Version 21
Google Sketchup Pro 7.1
Google Chrome Version 6.0.472.53
Tales Of Monkey Island Version 2.0.0.0
Kai Anders Wold - [email protected]

Here is the latest update :
Removing Microsoft Security Essentials 2.0 Beta fixed the itunes 10 hangs.
Kai Anders Wold - [email protected]

Installing Windows 7 Ultimate 64 bit upgrade version on an Apple MA877FN/A

Hello all,
I've an Apple MA877FN/A running Vista 32 bit and Mac OS X 10.5.8
I want to install Windows 7 Ultimate 64 bit upgrade version (student license) on my machine.
Is this possible?

Custom clean install.
If it is shipped as .ISO burn the DVD in Vista, if you use Apple DU then burn at reduced 2x speed.

Unable to install SQL Server 2012 Standard: Error code 0x851A0019

Hi All,
I am trying to install sql server 2012 standard edition on windows server 2008R2 but at the end of the installation it is giving me the following error message:
"The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes."
And in the log file I got the following error message:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
(I have posted part of the log file)
Need your help to resolve this issue.
Thanks,
MKNayeem

Hi,
Thanks for your reply.
I have already followed that article. I have changed the user to local account user, but it did not work.
Like you said the sql server is installed, but it is not starting the services. Following is the error log file message:
2015-03-16 10:12:15.27 Server Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Feb 10 2012 19:39:15
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
2015-03-16 10:12:15.27 Server (c) Microsoft Corporation.
2015-03-16 10:12:15.27 Server All rights reserved.
2015-03-16 10:12:15.29 Server Server process ID is 5724.
2015-03-16 10:12:15.29 Server System Manufacturer: 'VMware, Inc.', System Model: 'VMware Virtual Platform'.
2015-03-16 10:12:15.29 Server Authentication mode is MIXED.
2015-03-16 10:12:15.29 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG'.
2015-03-16 10:12:15.29 Server The service account is 'NT Service\MSSQL$BNG1SECISO'. This is an informational message; no user action is required.
2015-03-16 10:12:15.29 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\mastlog.ldf
2015-03-16 10:12:15.29 Server Command Line Startup Parameters:
-s "BNG1SECISO"
2015-03-16 10:12:15.57 Server SQL Server detected 2 sockets with 1 cores per socket and 1 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-03-16 10:12:15.57 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-03-16 10:12:15.57 Server Detected 16383 MB of RAM. This is an informational message; no user action is required.
2015-03-16 10:12:15.57 Server Using conventional memory in the memory manager.
2015-03-16 10:12:15.67 Server This instance of SQL Server last reported using a process ID of 2452 at 16-03-2015 07:03:13 (local) 16-03-2015 01:33:13 (UTC). This is an informational message only; no user action is required.
2015-03-16 10:12:15.67 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2015-03-16 10:12:15.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-03-16 10:12:15.69 Server Software Usage Metrics is disabled.
2015-03-16 10:12:15.70 spid6s Starting up database 'master'.
2015-03-16 10:12:15.78 Server CLR version v4.0.30319 loaded.
2015-03-16 10:12:15.82 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-03-16 10:12:17.36 spid6s Error: 824, Severity: 24, State: 2.
2015-03-16 10:12:17.36 spid6s SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:377; actual 261:2228225). It occurred during a read of page (1:377) in database ID 1 at offset 0x000000002f2000 in
file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and
must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Thanks
MKNayeem

Unable to install sql server 2012 eval edition with the downloaded files

Error which I get when i try to launch the installer
I have downloaded them in a single folder
Note : windows os is win 7 with sp1
Mudassar

TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
Unable to open Windows Installer file 'C:\Users\mabdu1\Downloads\SQLServer2012SP1-FullSlipstream-ENU-x64\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi'.
Windows Installer error message: The system cannot open the device or file specified.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?
LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xDC80C325
BUTTONS:
&Retry
Cancel
Now I am getting this error after I downloaded 2012 sp1 iso and extracted it to do the installation
Mudassar

Unable to uninstall sql server 2012 from Windows 7(ultimate) 64-bit SP1 version.

Similar Messages

Maybe you are looking for