Unable to update Arrival set in R12 OM

HI ,
I am not able to update the arrival set field in sales order line level after copy the order in R12.
Error: A line can belong to either an arrival set or ship set,but it cannot belong to both.
Any idea please
Regards,
Khadar

Do other Forecast sets have the same issue or is this the only Forecast set having this issue?
If you have not instanlled OM or AR, then you can only define and consume Forecasts at 'Item' level.
Regards
Siva G

Similar Messages

I had to change my password on my email password, but went to my setting under mail accounts and it is grey and I am unable to update it there. Can someone tell what I can do? This on an iPad2.

I had to change my password on my email password, but went to my setting under mail accounts and it is grey and I am unable to update it there. Can someone tell what I can do? This on an iPad2.

Duffygibbs wrote:
I did go to settings, restrictions....and there was a list of things...but no "off" or "on" to change.
If the word "Off" is sort of cloudy and the settings are greyed out - that means you do not have restrictions enabled - but just in case - do you use a passcode to lock the iPad?
Exactly what message are you getting and where are you getting the message - what does the "email icon" mean?

Unable to update new carrier setting

unable to update new carrier setting for iPhone 3G, it says error occurred (0xE8000001)

I am having the same problem.
Bought iPhone 3G on Vodafone AU.
Paid Voda to unlock it.
When I plug in to itunes I get a 'your carrier settings can now be updated would you like to proceed' sort of message. The first time I connect it then says 'Carrier Settings Updated' Yet i get no signal.
NEXT TIME I sync, it tries again, and then i get the same error as listed in this post.
I've tried this on TWO PC's (in every port!) and on a MacBook Pro (both USB ports).
I initially thought maybe Vodafone were just being slack in unlocking the phone, but have since found out that APPLE do the unlocking at their end and have basically put my IMEI number on their 'white list', so every time I sync it checks with Apple and lets me have a different version of software that unlocks the phone.
It's very frustrating, because the restore process takes about 15 mins, so I keep just trying random different things, but no one has any firm instructions.
Can I please confirm this is what I am meant to be doing.
1. Swap SIM to NEW sim.
2. Plug in to iTunes.
3. Carrier settings will then update.
4. RESTORE iPhone 3G.
5. SHOULD BE ALL OK... but after restore it will say 'please insert a compatible SIM that is unlocked. (ie, put the vodafone SIM back in!)
Am I missing something obvious? or is this an Apple issue.

I am unable to update either iTunes or iPhone or iPad or ipad2. After timing out I am instructed to check network setting and ensure connection is active. Connection is ok, all other downloads work ok as does iTunes and sync. Any suggestions?

I am unable to update software for iTunes, iPhone, iPad, or iPad 2. Installation times out and recommends I check network settings and the connection is active. It is There are no problems with other downloads/installs. iTunes, sync and devices work fine otherwise. Any suggestions?

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than Network connectivity tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

I am unable to update my album art since I commenced using match (and after upgrading to Yosemite). How can I 'unembed' old cover art and replace?

I am unable to update my album art on my iMac since I started using Match (and after upgrading to Yosemite 10.10.3). A message advises that it's not possible to removed old artwork if it's embedded. How can I 'unembed' old cover art and replace?

Normally artwork recovered with iTunes is stored as a separate artwork file and iTunes refers to that file to display artwork when you click on a track. However, if you then copy the file to another player the artwork file is left behind and the track will not display the artwork on the other player. To get around this it is possible to embed the artwork in the music file itself so it always travels with the file. Artwork can be embedded by you or files from third party sources may arrive with embedded artwork. iTunes apparently now won't replace artwork for such files. You can accomplish this by completely deleting artwork for a file or set of files in Get Info, then getting iTunes to fetch artwork which will then be set as a reference file rather than being embedded.
I use an old iTunes so unless you are using an ancient iTunes it won't help for me to give you great details. To erase artwork I simply get info on a series of files and check the box next to the artwork box without adding any artwork and close. To do it for single file I Get Info, go to the artwork display tab and click delete. Here's a Windows reference for a newer iTunes (but the "old Get Info" reference is for early iTunes 12 and no longer works with newer):I cannot delete embedded album artwork in iTunes 12

Unable to update a field using the Data tab on a VIEW

When viewing data using a VIEW instead of going to the table directly, am unable to change the values in any of the fields
When I click on the list of VIEWs for a schema, then select a view that is based on a SELECT statement for a single table with a Primary key, and then click on the DATA tab to modify the value in one of the fields, SQL Developer does not allow me to change the value.
Went into SQL Plus, and was able to execute an UPDATE statement against the same row of that VIEW, and update that field ("UPDATE vw_mytable SET thisfield = 'YES' WHEN row_id_number = 1'").
Does SQL Developer not allow updating tables through a VIEW?
Will it allow updating in the future? Please say yes.
Oracle 10g DB and latest version of SQL Developer.

Remember to add feature requests and vote on them on the SQL Developer Exchange!
<br>
<p>We have added updateable views to 1.1, but do remember, not all views are updateable - even in SQL*Plus.</p>
<br>
Sue

Unable to update apps on iPad mini. I have even restored the iPad and now I can't download any of my previously purchased apps.

Can someone help me. I am using an iPad mini with iOS 7.0.4 with wifi connection. Have had no problems until recently when I was unable to update apps and then noticed that some apps would open but no data would be available in apps like intelicast and Pinterest. I have restored the iPad and now I am unable to download any of my previously purchased apps.

1. Make sure iPad is using the latest software
2. Settings>General>Date and Time>Set Automatically>On
3. Make sure Time Zone is correct
4. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo.

Error: 1013231 Unable to update database while in readonly mode for backup

Hi all,
Wen im deleting the members for dimendsion , its giving error (hyperion 11.1 aso)
Error: 1013231 Unable to update database while in readonly mode for backup , how can i solve this problem ,plz can any one help on this
Thanks

Has somebody set the database ready for archiving, maybe some maxl has been run and the db has not been returned from read only mode.
Try running the following Maxl (change app.db to match your app/db)
alter database app.db end archive;
Cheers
John
http://john-goodwin.blogspot.com/

Unable to update apps after 10.5 update

I have been unable to update apps on my iPhone since downloading iTunes 10.5.
I have an established connection in iTunes to my account and can download apps but when I when I click on "# Updates Available" I am asked to sign in again and then receive a message that the iTunes Store is unavailable and to try again later.
All system software is up to date and I have update my iOS to 5. I am able to connect to the store via my iPhone and update there but do not understand why I can't view the updates on my Mac.
Please help

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, select the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
Step 5
According to a report, the error can result from changing the language setting of your Apple ID account. I can't confirm.

Unable to update iphoto or imovie Apps

I'm unable to update my iphoto and imovie Apps, after I uptaded
to Mavericks OS. I didn't change my Apple ID account
and I'm getting the following error:
"This update is for an app downloaded with a different Apple ID. Sign in with that Apple ID and try again."
any suggestions ?

Log out and log back in with the Apple ID you used to either set up your machine or buy the apps.

Unable to update Logical Delete field in AS400

hi all,
We have an ESB process that polls for data in AS400 DB and transfers this data into an Oracle DB. This polling is based on Logical Delete. The data transferred is in the range of some lakhs of records. So we are sending around 5000 records per transaction in ESB. When we deploy the process, the data in AS400 is being read and getting transferred. However, the status field is not changing to 'Read Value'. Due to this, we are facing a lot of issues like, when we're in middle of data transfer and the opmn restarts, the data which has already been transferred is also being read and this is throwing an error because of primary constraint violation. Even after the data transfer, if we delete any rows in Oracle DB, the data transfer resumes as the status field is not updated.
I have worked with logical delete in Oracle DB before and was working fine.
Please help me with Logical Delete functionality in case of AS400 Database and also please let me know the privilages we need to have on the AS400 DB to successfully run this process.
Thanks,
Kamal.

Hi,
According to your post, my understanding is that you was unable to update managed metadata field in designer workflow.
You need to provide the exact string for the MMS value, in the form of <id>;<value>.
The format of the value you wanted to set is uncorrectly, so you cannot update the managed metadata field.
If you want to set the managed metadata field value with correct format, you’d better to create custom action.
There is an article for your reference, although it is about the SharePoint 2010, it is similar to SharePoint 2013.
http://patrickboom.wordpress.com/2013/07/23/workflow-activity-set-managed-metadata-column/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

I am unable to update/restore my iPhone on my MacBook after attempting to downgrade iTunes 10 to iTunes 9.2

I am unable to update/restore my iPhone on my MacBook after attempting to downgrade iTunes 10 to iTunes 9.2. I am currently running iTunes 10 on my MacBook right now because it was my only option to get iTunes back on my MacBook. Everything is fine with syncing my device but the only problem I keep encountering is the restoring and updating options. When I restore my device it tells me that It could not be restored at this time. When I update it, iTunes tells me that it cannot complete the current build. I know for a fact I am missing some files that were deleted when I attempted the downgrade. Anybody know what files I am currently missing that is causing this?
- Jonny Appleseed 

acarstensen, Help has arrived! Let's take a closer look to see what's going on. Does your device have any physical/liquid damage? Did this issue begin after a recent software update or app download? EfrainM_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Unable to update record in web Form

Hi, i am unable to update record in a form. I am building a custom form using forms 6i and putting it on the web in oracle applications 11.5.9
I used template.fmb as a starting point for my form. I have one datablock based on a table. Insert, update and delete properties are set to yes on the property pallete of data block. The table against which i am running the form has a primary key which is a combination of two fields. I am able to update a record with pure SQL running against the table.
My form now brings back a record from the db like it should but whenever I try to update that record either by pressing Action Save or by clicking button that has update statement in it, instead of doing an update, it does an insert and tells me that this record already exists and that i entered value(s) that must be unique for each record. It thinks I want to insert but I want to update. What am i doing wrong???
Update allowed value is set to Yes in all the items in the data block and at the data block level as well. Querly_only is set to no.
What's even more frustratinng is that I've ran the form manually before starting with template.fmb and have been able to update the table but when I put it on the web and used template.fmb it stopped working!
I am very new to forms, can anybody suggest anything? Please help!!!

When you populate the 2nd block with a select into query, it's the same as just typing the data into the block. The record is treated as one needing to be inserted, not as one that is queried.
To populate it using a true query, but with data from the LOV, you can do this:
Programmatically set the default_where clause of the block based on the LOV. For example, if a name is chosen from the LOV in an item called LOV1, you could do:
set_block_property('block2','default_where','name='''||:block1.lov1||'''');
or if the LOV is a number, like a department number:
set_block_property('block2','default_where','deptno='||:block1.lov1);
The tricky part when you build your where clause is that you must surround strings with single quotes, and the way to do this is to use two single quotes to represent an actual single quote in the where clause. Otherwise a single quote is interpreted as part of the PL/SQL syntax.
Then, just navigate to block 2 and execute a query:
go_block('block2');
do_key('execute_query');
I hope this works for you. I didn't have time to test this, so I hope I didn't make any syntax errors when typing.

Unable to update when executed, table gets lock Execution does not stop Execution even for an hour

Following is my Query unable to update when Executed table gets lock Execution does not stop even for an hour.
update Employees
set Status = 'Close'
where statusid IN (select statusid
from MyView
where DownloadedDate ='2014-07-27 00:00:00.000'
here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid
i tried in various ways but not able to solve, statusid column have no index on, i tried using cursor but it does not work.
plz let me know how to solve this Issue, THANKS IN ADVANCE.

Hello,
You should better post your question to a more related Forum, like Transact-SQL or SQL Server Database Engine; this Forum is for samples & community Projects.
Have you checked the execution plan if indexes are used?
You could update the data in chunks, e.g. 10.000 rows per execution. For this you have to add a TOP clause and a filter to update only those, who are not updated yet.
update TOP (10000) Employees
set Status = 'Close'
where statusid IN
(select statusid
from MyView
where DownloadedDate ='2014-07-27 00:00:00.000')
AND Status <> 'Close'
Olaf Helper
[ Blog] [ Xing] [ MVP]

Unable to update, when executed table gets lock and Execution does not stop even for an hour.

Following is my Query, which unables to update. When Executed, table gets lock and Execution does not stop even for an hour.
update Employees
set Status = 'Close'
where statusid IN (select statusid
from MyView
where DownloadedDate ='2014-07-27 00:00:00.000'
here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid
i tried in various ways but not able to solve, statusid column have no index on, i tried using cursor but it does not work.
plz let me know how to solve this Issue, Its very Important to get solve as all my further work depends on Updation
, THANKS IN ADVANCE.

See also your other thread with the same question:
http://social.msdn.microsoft.com/Forums/en-US/80243625-fc3b-4ee1-bce1-4adcdbc16c14/unable-to-update-when-executed-table-gets-lock-execution-does-not-stop-execution-even-for-an-hour?forum=sqlserversamples
Olaf Helper
[ Blog] [ Xing] [ MVP]

Unable to update Arrival set in R12 OM

Similar Messages

Maybe you are looking for