Unable to update or populate data on for

I have created my form but I have been unable to update or populate data on the form with or without the sequence. the sequence updates but cannot see data that has been entered into the database. I may enter data but if I close the form and log back on the data disappears

Please provide more information.
What error message is displaying when you try populating the form with data from the database?
What error message is displaying when you try saving the data from the form to the database?
Did you run the debugger to trace what is happening?
If the sequence is updating, then I would believe it is working.

Similar Messages

Unable to update payment cards data through ORDERS05 in va02

Hi all,
I noticed one thing that in IDOC_INPUT_ORDERS (ie creation of sales order) we have a bdcdata populated for payment cards (for header in VA01) .But when we are changing sales order by IDOC_INPUT_ORDCHG (change sales order VA02) we have no bdcdata populated for updating payment cards ( like CCNUM ) though we are passing these details through IDOC.
Can anyone tell me why bdcdata through idoc posting is getting populated in VA01 but not through VA02 . We can change payment card dara manually in VA02 why cant we achieve the same through idoc.
Please help me as updating payment card data through idoc in VA02 is my requirement .
Do i need to populate it by writing code in an exit in IDOC_INPUT_ORDCHG.
Any help is appreciated.
Thanks and Regards
Sweta

Hi,
Can you please let me know the segment in ORDERS05 Idoc to process the Payment card information and if the standard Function Module can handle the creation of a Sales Order with data for Payment Card.
We have a requirement to map the Tokenized Number of the Credit Card send from a store front end to ECC mapping via SAP-PI.
Thanks in Advance,

Unable to update item master data after upgrade

Greetings,
I have just upgraded from 2005A SP01 PL22 to 8.81 PL05.
After the upgrade, I am unable to update any field in the item master data.
Error message:
In "Warehouses - Setup" window, on "Accounting" tab, choose sales-type revenue account , '_SYS00000001165' [Message 131-52]
I have checked all the warehouses accounting tab and all the revenue account is a sales type account. I have also checked the GL for _SYS00000001165 and it is a COGS GL. After I change its type to "Sales", I am able to update. This shouldn't be the case.
I have also tested creating and update new item master and I have no problem. However, I will have the same problem if i add a new item via duplicating from an old item.
Any advice?
Thank you.

Hi,
Can you also check whether the Item which you are trying to update has Manage G\L Account by as Item, Item group or Warehouse?
If you have checked for the Warehouses, check for the Item Group and at the G\L Determination > Inventory tab as well.
Kind Regards,
Jitin
SAP Business One Forum Team

MY airbook version is 10.5.8 , unable to update higher version .pl advise for maven or itunes latest version

pl advise for maven or itunes latest version,unable to update higher version

The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Unable to update Camera Raw 6.7 for PS CS5

After updating my OS to Windows 8.1, and reinstalling Photoshop CS5 and updates to version 12.0.4, I have been unable to complete the Photoshop Camera Raw 6.7 Update. All other updates to PS and Bridge installed correctly.
The update file downloads completely from http://www.adobe.com/downloads/updates.html, but immediately fails with the following screen:
"Some updates failed to install."
"The following updates were unable to install. If you wish to install these updates, please fix the problems below and retry:
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later."
Is there a known workaround for this problem?

Please provide me with a snapshot from Ps->Help->Update->Preferences.
Please confirm your ACR version from Help->About Plugin->Camera Raw and provide us with the following logs.
You can find them at:
ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected]

MBAM "Enterprise Compliance Report" not updating "Last Contact" date/time for any/all systems.

Running BitLocker/MBAM 1.0.1237.1.
About 1 month ago, "Last Contact" date/time listed in MBAM "Enterprise Compliance Report" stopped updating (last updated 1 month ago) for all systems. However, reporting against these exact same systems individually via
"Computer Compliance Report" shows current/correct "Last Contact" date/time (last updated today).
Have tried http://support.microsoft.com/kb/2620269/en-us but no luck.
Hoping someone has experienced this before, fixed, and can share insights.
Thx,
DCL

You may want to look for communication errors under the MBAM node in Event Viewer.
You may also want to review the registry settings discussed under the
Configure Lab Computers for MBAM Evaluation section of this TechNet article:
HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\ClientWakeupFrequency
HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\StatusReportingFrequency
HKLM\Software\Microsoft\MBAM\NoStartupDelay
Specifically the StatusReportingFrequency
key.
Brandon
MDOP on the Springboard Series on TechNet

Create and Populate Date Dimension for AdventureWorksDW2012

Does anybody have scripts for DimDate for AdventureWorksDW 2012 or 2014?
If I generate Schemas and data, it takes several megabytes. I have requirement that this should be done with script to save space. I have also need to extend the script with local calender requirements.
Kenny_I

If you mean to populate the DimDate table with range of dates, try the following:
Create table #dates (
[date] date not null
declare @d date
set @d ='2010-01-03'; --- change this to the start date that you want
while @d < '2017-01-01' --- change this to the end date that you want
begin
set @d= DATEADD(DAY,1,@d)
insert into #dates (date) values (@d)
end
select date,
[YEAR] = datepart(year, date),
[MONTH No.] = datepart(month, date),
[MONTH] = case datepart(month, date) when 1 then '01 January'
when 2 then '02 February'
when 3 then '03 March'
when 4 then '04 April'
when 5 then '05 May'
when 6 then '06 June'
when 7 then '07 July'
when 8 then '08 August'
when 9 then '09 September'
when 10 then '10 October'
when 11 then '11 November'
when 12 then '12 December'
end,
[day]= datepart( day, date),
[weekday] = case datepart(weekday, date) when 1 then 'Sunday'
when 2 then 'Monday'
when 3 then 'Tuesday'
when 4 then 'Wednesday'
when 5 then 'Thursday'
when 6 then 'Friday'
when 7 then 'Saturday'
end
from #dates

Unable to update Adobe Reader plug in for Firefox 28

Everytime I try I can download the update but am unable to get it to run.

Hi Fedupinnz,
Please refer to the KB : http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
to enable the Acrobat plugin in Firefox.

Updated: Roll out date changes for London

FYI Londoners. A newly updated roll out map for London has been published today on the main BT Infinity Website.
Happy/Sad?? Comments...

Beulah Hill has moved from March 31st and June 30th to now September 30th on the map. The phone line checker states "not going to happen for 6 months".
Anyone else noticing anything odd?

Update Rule 8ZCDSDS03 and 80CDS_DS07 for data mart

Hello Guru´s
My proble is this
8ZCDSDS03 Update rules to Data marts for cube 0SD_C03
80CDS_DS07 Update rules to Data marts for cube 0SD_C11
are in gray i don´t know why. do you have and explanation or a solution for that.
whit best regards
agt

Hi Antonio,
Any time you make a change to a cube, check the update rules feeding it and activate them. Also check if this InfoCube is supplying data to other data targets and check the 8* update rules and activate if required.
Right now you can double click the grey rules and activate them and transport the active rules (if required)
Hope this helps...

Can not update request in data target

Hi,
We have a process chain for master data (10 parallel) loads. One of the load
failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
When I checked the InfoPackage
(a) update: full load
(b) it has data selection
(c) processing :PSA and then to data targets
(d) Data targets: update in all data targets for which active rules exist.
But I do not see any list of data targets here.
Can some one please suggest me how do I correct this load failure.
Thanks

Hi Wondewossen, NS and Nagesh,
Thanks for the information. I am in support, and the developer is
not here now.
I have checked Header tab in the monitor, in this there
is a update symbol and infosource name and an -->
but after arrow there is nothing.
when I click on this I get a message
"No active update rules exist".
Can you please advice me how to I correct this.
Thanks

Unable to update sales order unsing the BAPI 'BAPI_SALESORDER_CHANGE'

Hi All,
I am unable to update the payment method field for some sales orders using the bapi 'BAPI_SALESORDER_CHANGE'. I am getting the reason in the table RETURN as 'Field 'ZLSCH' cannot be changed, VBAPKOM 000050 ready for input'.
Could anyone throw some light on it.
Thanks a ton.
Regards,
Santosh Kotra.

Hi
Without reversing invoice we can't update price and this is standard bevaior which is logical too. For your scenario I am wondering why would you want to change price for a line item or order which is alrady invoiced and posted to FI. What difference would it make to change price in sale order when this has already been posted in FI?
Thank$

Unable to update iTunes (since May 2012)

I have been unable to update itunes on my PC for a couple of months now. It tells me that it can't access a folder/file that doesn't exist. Anyone else have this issue? And, Anyone know how to fix it?

It tells me that it can't access a folder/file that doesn't exist.
What's the precise text of that message, please? (There's a few different ones I can think of that you might be getting.)

HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

HT1386 Unable to update older ipad (model MB292LL) to ios 6 - when checking for update msg says ios 5.1.1 and is already up to date.

Unable to update older ipad (model MB292LL) to ios 6 - when checking for update msg says ios 5.1.1 and is already up to date.

That is correct.
You have an original iPad.
iOS 5.1.1 is the end of the line - that is the latest iOS that model can use.

Unable to update or populate data on for

Similar Messages

Maybe you are looking for