Unable to use SCAT to upload material master in ECC 6

HI
I am unable to use SCAT to upload material master in ECC 6,
an error is triggering
"Releases higher than 6.40 are not permitted
Message no. TT005
Diagnosis
With Web Application Server Release 6.40, you cannot create new automated CATT test cases. However, you can create manual CATT test cases"
canany body please help me to use SCAT
Sreeram

you have to read yourself:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
I certainly do not use SCAT or SECATT to load master data, especially not material master.
A material master has dynamic screens, based on the material type the view selection will be different, based on entries made in MRP view fields become hidden or mandatory. Such things canot be done with a static recording.
SAP provides batch input programs and BAPIs for material master load and additonally loading per IDOC in LSMW (which offers as well batch input and Bapi methods)

Similar Messages

Upload Material master with long text using LSMW

Hello,
i want ot upload material master data via MM01 using LSMW in following views: basic data 1 ,2, purchasing, purchase order text, plant data 1,2.
i have to upload long text in purchase order text with length more then 132 char. (approx 700 char long text). and i have text file in which long text is maintained in a single row. then how can i do it without formating text file or anyother possible solution.
please help.

ca u clarify how can i do it.
suppos i have longtext "Air cooled type air-conditioning unit complete with following components & distance between indoor & outdoor unit is 10 RMT. A).Indoor evaporating unit comprising of cooling coils,insulated drain tray,20 micron HDPE washable filters,blower,motor,electical junction box etc. B).Outdoor condensing unit comprising of hermatic/semiharmetic compressor's.condenser coils,propeller/axial fans,motors,pressure switches/cutout etc.C).Charging of refrigerant gas & oil.D).Inter connecting refrigerating piping of copper duly insulated with EXPANDED POLYETHYLENE tubing.E).Complete electical power wiring of AL.&Control wirng of copper required from indoor & outdoor units.Earthing of the complete system with 8 G G.I.wire. F).Electrical panel will be completed with necessary starter,fuses,switches,timers,over-load relays,contactors,push button and indicating lamps,single phasing preventer etc..and also with remote control with cording. G).The panel should have 1 no.potential free contactor to connect with central fire detection system.The panel should have voltage scanner to ensure stabilized power input to the machine.H).Outdoor unit shall be mounted on MS angle base frame structure duly black painted with synthetic epoxy paint.I).The frame structure shall be mounted on MS plate & serrated rubber pads."
then what i have to do changes in lsmw.?

I want to upload material master (MM01) using LSMW with BAPI method

I want to upload material master (MM01) using LSMW with BAPI method and also later on I may need to change the updated data.
Which business object and Method I should use so that i can do both.
Thanks
kumar n

Hi,
The business object is BUS1001.
Thanks,
Murali

Problem in uploading material master data using BAPI?

Hi all,
I am using BAPI_MATERIAL_SAVEDATA to upload materail master data. Here i have to pass moving average price values in two currenices(using account_view and valuationdata in BAPI). But i found only one field for moving average price i.e moving_pr in valuationdata.
Please help me on how to upload the moving average price in two currencies?
Thanks,
Aravind.

Hi
There is function module BAPI_MATERIAL_SAVEREPLICA where
VALUATIONDATA parameter is in the tables tab.
But I didn't test it. Try, may be it works as you need.

Upload Material Master to non SAP Catalog

Hi Guys,
we are trying to create a process to upload Material Master and/or Purchasing Info Recordes data directly from the backend into an non-SAP catalog. So far I only know about report BBP_CCM_CATALOG_TRANSFER, that uploads replicated material master from SRM into CCM or MDM Catalog.
Are there reports available in the backend (ECC6 EhP3) or in SRM 700 that could extract the data from Material Master and Purchasing Info Records into a format (XML;CSV,..) that could be used to upload these data into a catalog manually or via PI.
Any hints are welcome!
Thx
Dieter

Hi Dieter,
Yes you can run MECCM in your ECC system to transfer PIR and contracts as XML files.
Regards,
Nikhil

LSMW - RMDATIND Upload material master

Hi All,
I'm using LSMW direct input method (RMDATIND) to upload material master. However, I'm having issues on uploading material prices (eg: moving average price) where the format uploaded was incorrect.
LSWM Data Source I've declared for VERPR (Moving Average Price) is character with 14 Length size. Values populated in upload file is eg: 132.93.
The value been created in material master is-> 13 293,00.
Can anyone advise on this issues? Is there any wrong to input value or data source declaration? Thanks.

Hi Blue Sky,
execute the whole process of LSMW in direct input and go to SM35 to check and process the session manually,,
-Regards
Sid

I have uploaded Material Master thr LSMW but Materials are not saved.

Hi
i have uploaded Material Master through LSMW but unfortunetly Matreials are not saved in system.

Hi
Check first with one record you are able to create the material Manually by using tcode MM01.
Or Rerun the batch Input in Foreground mode so that you can see the error or whether Materila no is created
I do not think so any test mode in Batch Input session.
Check the Log in SM35 for your session if you have any error messages.
Hope it helps
Karthik

Upload material master data

Hi friends,
can u provide prog for upload material master data by using bapi bapi_material_savedata.
i need to pass the following fields .
                MARA-MATNR
           MARA-MBRSH
              MARA-MTART
            MARA-MATKL
             MARA-MEINS
          MAKT-SPRAS
            MAKT-MAKTX
            MVKE-VKORG
          MVKE-VTWEG
                MVKE-MTPOS
             MARA-TRAGR
                      MARC-WERKS
           MARC-EKGRP
               MBEW-BWKEY   and also using dynamic internal table.

Hi siddu,
As a developer you should ask for the code.
Try u r self writing the code.If u struck any where just post the question.
There wil be many threads regrading material master data.
Give ur bapi BAPI_MATERIAL_SAVEDATA and search in the forum then u will get so many threads.
serach from there and write accrding to ur req.
Thanks,

Using BAPI to upload Equipment Master (IE01)

Hi,
Can any one help to do below object...that i need for resume.
Pls provide me compelete details with code or else give me guidelines in detail to carrayout.....
i should be thankful to you....
Using BAPI to upload Equipment Master (IE01). Fields that are uploaded are Equipment category, valid to date, Equip. Description, object type, Acquisition value, Acquisition date, Maintenance Plan, plan section, catalog profile. Input file is accessed from application server. Error log file is created at application server.
with regards
bheem

If this is a onetime load, you can use LSMW to do this.
Object 0400. Must easier than writing a report from scratch.
Albert

Need to upload material master.

Hi experts,
I am periodically required to change values in some fields from MRP 1,2,3 and 4 views. It takes hell of a time as there are many material codes..nearly 500 every month.
My question is is there any other quick input method like creating an excel file for that data and upload it?
I remember in mylast company for uploading material master the consultants provided us with that kind of query/data run.
Regards,
Sam

Dear ,
You need to run BDC in Back ground for uploading Material Master parametrs or new material creation .It can be Batch process.
Or Goto T-code MM17 mass change check tables there, and retreive data one by one from se16, then merge your file. or develop report detailed report for this then download.
Look up the following therads which is self explaintaory :
http://wiki.sdn.sap.com/wiki/display/ABAP/MaterialMasterUpload+Program
http://wiki.sdn.sap.com/wiki/display/Snippets/BDCProgramtoUploadMaterialMasterData+(MM01)
http://www.sap-img.com/abap/upload-material-master-finish-goods.htm
Just discuss with your ABAPer and provide him the Excell sheet with necessary parametrs .
Regards
JH
Edited by: Jiaul Haque on Oct 11, 2010 3:29 PM

Bapi or IDOC which create material master in ECC

Hi Guys,
Can any one let me to know by which function modules or Bapi or IDOC available to create material master in ECC?
Regards,
Veera

hi,
there are lot many ways of creating Mat master.
1: you can go for idocs: /CWM/MATMAS_BAPI, /SAPSLL/MATMAS_SLL, ARTMAS, MATMAS..
2: you can use LSMW batch method:
Object               0020   Material master
Method               0000
Program Name         RMDATIND
Program Type         D   Direct Input
3: you can use BAPI as suggested above:
Business Object      BUS1001006   Standard material
Method               SAVEDATA                    Create and change materia
Message Type         MATMAS_BAPI                 Create and change materia
Basic Type           MATMAS_BAPI03               Create and Change Materia
ags.

How to upload material master using BAPI

I have a flat file with 3 fields MATNR,MAKTX,MEINS and I want to create material master with 2 views basic data1 & basic data2 with three fields using BAPI
Can anyone tell me how to do this only using three fields and 2 views
and also i want to know what is the exact difference between session call transaction BAPI and LSWM methods.
Thank you,
Pradeep Reddy M.

Hi Pradeep Reddy Miriyala,
This a example you can use, the views are related with each table only have to adapt to your case.
Best regards
Jaime Cordeiro
*& Report ZMM01_BAPI_01                                               *
REPORT ZMM01_BAPI_01                           .
               STRUCTURE DECLARATIONS                             *
TABLES: BAPIMATHEAD, "Headerdata
        BAPI_MARA,    "Clientdata
        BAPI_MARAX,   "Clientdatax
        BAPI_MVKE,    "SalesData
        BAPI_MVKEX,   "SalesDatax
        BAPI_MARC,    "Plantdata
        BAPI_MARCX,   "Plantdatax
        BAPI_MBEW,    "ValuationData
        BAPI_MBEWX,    "ValuationData
        BAPI_MLGN,    "Storage
        BAPI_MLGNX,   "StorageX
        BAPI_MAKT,    "Material description
        BAPI_MARM,
        BAPI_MARMX,
        bapi_mean,
        BAPI_MLAN,
        BAPIRET2.     "Return messages
DATA: BEGIN OF LSMW_MATERIAL_MASTER,
> Initial Data
     matnr(18),
     mtart(4),
     WERKS(4),
     VKORG(4),
     VTWEG(2),
     LGNUM(3),"retirar
> Basic Data 1
     MAKTX(40),
     MEINS(3),
     MATKL(9),
     BISMT(18),
     SPART(2),
     PRDHA(18),
     BRGEW(17),
     NTGEW(17),
     GEWEI(3),
     VOLUM(13),
     VOLEH(3),
     EAN11(18),
     NUMTP(2),
> Sales 1
     DWERK(4),
     TAXKM(1),
> Sales 2
     KTGRM(2),
     PRODH(18),
     MTPOS(4),
> Sales: General/Plant
     MTVFP(2),
     TRAGR(4),
     LADGR(4),
     PRCTR(10),
> Purchasing
Novas entradas
     EKGRP(3),
     KAUTB(1),
     XCHPF1(1),
     EKWSL(4),
     WEBAZ(3),
     INSMK1(1),
     KORDB(1),
> Foreign Trade
     STAWN(17),
     MTVER(4),
     HERKL(3),
     HERKR(3),
> Purchase Order Text View
Identificar Campos
     TextoEN(100),
     TextoPT(100),
     TextoPL(100),
     TextoES(100),
> MRP1
     DISGR(4),
     DISMM(2),
     DISPO(3),
     DISLS(2),
     BSTMI(18),
     BSTRF(13),
> MRP2
     BESKZ(1),
     RGEKZ(1),
     LGPRO(4),
     LGFSB(4),
     EPRIO(4),
     WEBAZ1(3),
     PLIFZ(3),
     FHORI(3),
> MRP3
     PERKZ(1),
     STRGR(2),
     VRMOD(1),
     VINT1(3),
     VINT2(3),
> MRP4
     ALTSL(1),
     FEVOR(3),
> Work Sch
     INSMK(1),
     XCHPF(1),
     UEETO(3),
> Plant Storage 1
     MHDRZ(4),
     MHDHB(4),
> Plant Storage 2
     PRCTR1(10),
     EPRIO1(4),
> WM 1 S01 comum a todos
     LTKZA_S01(3),
     LTKZE_S01(3),
     LGBKZ_S01(3),
> WM 1 SHV
     LTKZA_SHV(3),
     LTKZE_SHV(3),
     LGBKZ_SHV(3),
> WM 1 SQW
     LTKZA_SQW(3),
     LTKZE_SQW(3),
     LGBKZ_SQW(3),
> WM 2
     LHMG1(13),
     LHME1(3),
     LETY1(3),
     LHMG2(13),
     LHME2(3),
     LETY2(3),
     LHMG3(13),
     LHME3(3),
     LETY3(3),
> Accounting 1
     BKLAS(4),
     VPRSV(1),
     VERPR(23),
     PEINH(5),
   END OF LSMW_MATERIAL_MASTER.
DATA:V_FILE TYPE STRING.
DATA:VolumUnitConv(3).
DATA:UnitConv(3).
               INTERNAL TABLE DECLARATIONS                         *
*to store the input data
DATA:
BEGIN OF it_matmaster OCCURS 0.
        INCLUDE STRUCTURE LSMW_MATERIAL_MASTER.
DATA:
END OF it_matmaster.
*for material description
DATA:BEGIN OF IT_MATERIALDESC OCCURS 0.
        INCLUDE STRUCTURE BAPI_MAKT .
DATA:END OF IT_MATERIALDESC.
*FOR gross wt
data: begin of it_uom occurs 0.
        include structure BAPI_MARM.
data:end of it_uom.
DATA: BEGIN OF IT_UOMX OCCURS 0.
        INCLUDE STRUCTURE BAPI_MARMX.
DATA:END OF IT_UOMX.
data:begin of it_mean occurs 0.
        include structure bapi_mean.
data:end of it_mean.
DATA: BEGIN OF it_MLAN OCCURS 0.
        include STRUCTURE BAPI_MLAN.
DATA: END OF it_MLAN.
DATA:BEGIN OF IT_MLTX OCCURS 0.
        INCLUDE STRUCTURE BAPI_MLTX.
DATA:END OF IT_MLTX.
*to return messages
DATA:BEGIN OF IT_RETURN OCCURS 0.
        INCLUDE STRUCTURE BAPIRET2.
DATA:END OF IT_RETURN.
DATA : imat TYPE TABLE OF bapimatinr WITH HEADER LINE.
DATA: text LIKE bapi_mltx OCCURS 0 WITH HEADER LINE.
DATA: matnrAct(18),oldMart(4).
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-002.
PARAMETERS:P_FILE LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1 .
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = 'P_FILE'
    IMPORTING
      FILE_NAME     = P_FILE.
               TO UPLOAD THE DATA                                  *
START-OF-SELECTION.
V_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = V_FILE
     FILETYPE                      = 'ASC'
     HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
    tables
      data_tab                      = IT_MATMASTER
   EXCEPTIONS
     FILE_OPEN_ERROR               = 1
     FILE_READ_ERROR               = 2
     NO_BATCH                      = 3
     GUI_REFUSE_FILETRANSFER       = 4
     INVALID_TYPE                  = 5
     NO_AUTHORITY                  = 6
     UNKNOWN_ERROR                 = 7
     BAD_DATA_FORMAT               = 8
     HEADER_NOT_ALLOWED            = 9
     SEPARATOR_NOT_ALLOWED         = 10
     HEADER_TOO_LONG               = 11
     UNKNOWN_DP_ERROR              = 12
     ACCESS_DENIED                 = 13
     DP_OUT_OF_MEMORY              = 14
     DISK_FULL                     = 15
     DP_TIMEOUT                    = 16
     OTHERS                        = 17
IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
check sy-subrc eq 0.
               DATA POPULATIONS                                    *
LOOP AT IT_MATMASTER.
    IF IT_MATMASTER-MATNR EQ '' .
      oldMart = IT_MATMASTER-Mtart.
      CALL FUNCTION 'MATERIAL_NUMBER_GET_NEXT'
        EXPORTING
          MATERIALART                = IT_MATMASTER-Mtart
       IMPORTING
         MATERIALNR                 = matnrAct
RETURNCODE                 =
EXCEPTIONS
NO_INTERNAL_INTERVAL       = 1
TYPE_NOT_FOUND             = 2
OTHERS                     = 3
      if sy-subrc = 0.
        BAPIMATHEAD-MATERIAL = matnrAct.
      endif.
    ELSE.
      BAPIMATHEAD-MATERIAL = it_matmaster-matnr.
    ENDIF.
Preenchimento dos dados do ecrã inicial
   BAPIMATHEAD-MATERIAL = IT_MATMASTER-MATNR.
    BAPIMATHEAD-IND_SECTOR = 'M'.
    BAPIMATHEAD-MATL_TYPE = IT_MATMASTER-Mtart.
    "declaration of views
    BAPIMATHEAD-BASIC_VIEW = 'X'.
    BAPIMATHEAD-MRP_VIEW = 'X'.
    BAPIMATHEAD-STORAGE_VIEW = 'X'.
    BAPIMATHEAD-WAREHOUSE_VIEW = 'X'.
    BAPIMATHEAD-ACCOUNT_VIEW = 'X'.
    If IT_MATMASTER-Mtart EQ '31'.
      BAPIMATHEAD-SALES_VIEW = 'X'.
      BAPIMATHEAD-WORK_SCHED_VIEW = 'X'.
    ENDIF.
    If IT_MATMASTER-Mtart EQ '51'.
      BAPIMATHEAD-SALES_VIEW = 'X'.
      BAPIMATHEAD-WORK_SCHED_VIEW = 'X'.
    ENDIF.
    If IT_MATMASTER-Mtart EQ '65'.
      BAPIMATHEAD-PURCHASE_VIEW = 'X'.
    ENDIF.
Preenchimento de dados relativos a MARA
    BAPI_MARA-BASE_UOM = IT_MATMASTER-MEINS.
    BAPI_MARA-MATL_GROUP = IT_MATMASTER-MATKL.
    BAPI_MARA-OLD_MAT_NO = IT_MATMASTER-BISMT.
    BAPI_MARA-DIVISION = IT_MATMASTER-SPART.
    BAPI_MARA-PROD_HIER = IT_MATMASTER-PRDHA.
    BAPI_MARA-NET_WEIGHT = IT_MATMASTER-ntgew.
    BAPI_MARA-UNIT_OF_WT = IT_MATMASTER-GEWEI.
    BAPI_MARA-TRANS_GRP = IT_MATMASTER-tragr.
> Novas Entradas
    IF IT_MATMASTER-Mtart EQ '65'.
      BAPI_MARA-BATCH_MGMT = IT_MATMASTER-XCHPF1.
      BAPI_MARA-PUR_VALKEY = IT_MATMASTER-EKWSL.
      BAPI_MARAX-PUR_VALKEY = 'X'.
    ELSE.
               BAPI_MARA-BATCH_MGMT = IT_MATMASTER-XCHPF.
ENDIF.
> Novas Entradas
      BAPI_MARA-MINREMLIFE = IT_MATMASTER-MHDRZ.
      BAPI_MARA-SHELF_LIFE = IT_MATMASTER-MHDHB.
      BAPI_MARAX-MATL_GROUP = 'X'.
      BAPI_MARAX-OLD_MAT_NO = 'X'.
      BAPI_MARAX-BASE_UOM = 'X'.
      BAPI_MARAX-DIVISION = 'X'.
      BAPI_MARAX-PROD_HIER = 'X'.
      BAPI_MARAX-NET_WEIGHT = 'X'.
      BAPI_MARAX-UNIT_OF_WT = 'X'.
      BAPI_MARAX-TRANS_GRP = 'X'.
      BAPI_MARAX-BATCH_MGMT = 'X'.
      BAPI_MARAX-MINREMLIFE = 'X'.
      BAPI_MARAX-SHELF_LIFE = 'X'.
Preencimento de dados Relativos a MKVE
      BAPI_MVKE-DELYG_PLNT = IT_MATMASTER-DWERK.
      BAPI_MVKE-SALES_ORG = IT_MATMASTER-VKORG.
      BAPI_MVKE-DISTR_CHAN = IT_MATMASTER-VTWEG.
      BAPI_MVKE-PROD_HIER = IT_MATMASTER-PRODH.
      BAPI_MVKE-ITEM_CAT = IT_MATMASTER-MTPOS.
      BAPI_MVKE-ACCT_ASSGT = IT_MATMASTER-KTGRM.
      BAPI_MVKEX-SALES_ORG = IT_MATMASTER-VKORG.
      BAPI_MVKEX-DISTR_CHAN = IT_MATMASTER-VTWEG.
      BAPI_MVKEX-PROD_HIER = 'X'.
      BAPI_MVKEX-ITEM_CAT = 'X'.
      BAPI_MVKEX-DELYG_PLNT = 'X'.
      BAPI_MVKEX-ACCT_ASSGT = 'X'.
Preencimento de dados Relativos a MARC
      BAPI_MARC-PLANT = IT_MATMASTER-WERKS.
      BAPI_MARC-AVAILCHECK = IT_MATMASTER-MTVFP.
      BAPI_MARC-LOADINGGRP = IT_MATMASTER-LADGR.
      BAPI_MARC-PROFIT_CTR = IT_MATMASTER-PRCTR.
      IF NOT IT_MATMASTER-Mtart EQ '51'.
        BAPI_MARC-COMM_CODE = IT_MATMASTER-STAWN.
        BAPI_MARC-COUNTRYORI = IT_MATMASTER-HERKL.
        BAPI_MARC-REGIONORIG = IT_MATMASTER-HERKR.
        BAPI_MARCX-COMM_CODE = 'X'.
        BAPI_MARCX-COUNTRYORI = 'X'.
        BAPI_MARCX-REGIONORIG = 'X'.
      ENDIF.
      BAPI_MARC-MRP_GROUP = IT_MATMASTER-DISGR.
      BAPI_MARC-MRP_TYPE = IT_MATMASTER-DISMM.
      BAPI_MARC-MRP_CTRLER = IT_MATMASTER-DISPO.
      BAPI_MARC-LOTSIZEKEY = IT_MATMASTER-DISLS.
      BAPI_MARC-MINLOTSIZE = IT_MATMASTER-BSTMI.
      BAPI_MARC-ROUND_VAL = IT_MATMASTER-BSTRF.
      BAPI_MARC-PROC_TYPE = IT_MATMASTER-BESKZ.
      BAPI_MARC-BACKFLUSH = IT_MATMASTER-RGEKZ .
      BAPI_MARC-ISS_ST_LOC = IT_MATMASTER-LGPRO.
      BAPI_MARC-DETERM_GRP = IT_MATMASTER-EPRIO.
      BAPI_MARC-SM_KEY = IT_MATMASTER-FHORI.
      BAPI_MARC-PERIOD_IND = IT_MATMASTER-PERKZ.
      BAPI_MARC-PLAN_STRGP = IT_MATMASTER-STRGR.
      BAPI_MARC-CONSUMMODE = IT_MATMASTER-VRMOD.
      BAPI_MARC-BWD_CONS = IT_MATMASTER-VINT1.
      BAPI_MARC-FWD_CONS = IT_MATMASTER-VINT2.
      BAPI_MARC-ALT_BOM_ID = IT_MATMASTER-ALTSL.
      BAPI_MARC-PRODUCTION_SCHEDULER = IT_MATMASTER-FEVOR.
      IF NOT IT_MATMASTER-Mtart EQ '65'.
        BAPI_MARC-IND_POST_TO_INSP_STOCK = IT_MATMASTER-INSMK.
        BAPI_MARC-OVER_TOL = IT_MATMASTER-UEETO.
        BAPI_MARCX-IND_POST_TO_INSP_STOCK = 'X'.
        BAPI_MARCX-OVER_TOL = 'X'.
      ENDIF.
> Novas Entradas
      IF IT_MATMASTER-Mtart EQ '65'.
             BAPI_MARC-PUR_GROUP = IT_MATMASTER-EKGRP .
             BAPI_MARC-AUTO_P_ORD = IT_MATMASTER-KAUTB .
             BAPI_MARC-GR_PR_TIME = IT_MATMASTER-WEBAZ .
             BAPI_MARC-IND_POST_TO_INSP_STOCK = IT_MATMASTER-INSMK1 .
             BAPI_MARC-SOURCELIST = IT_MATMASTER-KORDB .
             BAPI_MARC-EXPIMPGRP = IT_MATMASTER-MTVER .
             BAPI_MARCX-PUR_GROUP = 'X'.
             BAPI_MARCX-AUTO_P_ORD = 'X'.
        BAPI_MARCX-GR_PR_TIME = 'X'.
        BAPI_MARCX-IND_POST_TO_INSP_STOCK = 'X'.
        BAPI_MARCX-SOURCELIST = 'X'.
        BAPI_MARCX-EXPIMPGRP = 'X'.
      ENDIF.
> Novas Entradas
      BAPI_MARCX-PLANT = IT_MATMASTER-WERKS.
      BAPI_MARCX-AVAILCHECK = 'X'.
      BAPI_MARCX-LOADINGGRP = 'X'.
      BAPI_MARCX-PROFIT_CTR = 'X'.
      BAPI_MARCX-MRP_GROUP = 'X'.
      BAPI_MARCX-MRP_TYPE = 'X'.
      BAPI_MARCX-MRP_CTRLER = 'X'.
      BAPI_MARCX-LOTSIZEKEY = 'X'.
      BAPI_MARCX-MINLOTSIZE = 'X'.
      BAPI_MARCX-ROUND_VAL = 'X'.
      BAPI_MARCX-PROC_TYPE = 'X'.
      BAPI_MARCX-BACKFLUSH = 'X'.
      BAPI_MARCX-ISS_ST_LOC = 'X'.
      BAPI_MARCX-DETERM_GRP = 'X'.
      BAPI_MARCX-SM_KEY = 'X'.
      BAPI_MARCX-PERIOD_IND = 'X'.
      BAPI_MARCX-PLAN_STRGP = 'X'.
      BAPI_MARCX-CONSUMMODE = 'X'.
      BAPI_MARCX-BWD_CONS = 'X'.
      BAPI_MARCX-FWD_CONS = 'X'.
      BAPI_MARCX-ALT_BOM_ID = 'X'.
      BAPI_MARCX-PRODUCTION_SCHEDULER = 'X'.
Preencimento de dados Relativos a MLGN
      BAPI_MLGN-WHSE_NO = 'S01'.
      BAPI_MLGN-WITHDRAWAL = IT_MATMASTER-LTKZA_S01.
      BAPI_MLGN-PLACEMENT = IT_MATMASTER-LTKZE_S01.
      BAPI_MLGN-STGESECTOR = IT_MATMASTER-LGBKZ_S01.
      BAPI_MLGN-L_EQUIP_1 = IT_MATMASTER-LHMG1.
      BAPI_MLGN-L_EQUIP_2 = IT_MATMASTER-LHMG2.
      BAPI_MLGN-L_EQUIP_3 = IT_MATMASTER-LHMG3.
      BAPI_MLGN-LEQ_UNIT_1 = IT_MATMASTER-LHME1.
      BAPI_MLGN-LEQ_UNIT_2 = IT_MATMASTER-LHME2.
      BAPI_MLGN-LEQ_UNIT_3 = IT_MATMASTER-LHME3.
      BAPI_MLGN-UNITTYPE_1 = IT_MATMASTER-LETY1.
      BAPI_MLGN-UNITTYPE_2 = IT_MATMASTER-LETY2.
      BAPI_MLGN-UNITTYPE_3 = IT_MATMASTER-LETY3.
      BAPI_MLGNX-WHSE_NO = 'S01'.
      BAPI_MLGNX-WITHDRAWAL = 'X'.
      BAPI_MLGNX-PLACEMENT = 'X'.
      BAPI_MLGNX-STGESECTOR = 'X'.
      BAPI_MLGNX-L_EQUIP_1 = 'X'.
      BAPI_MLGNX-L_EQUIP_2 = 'X'.
      BAPI_MLGNX-L_EQUIP_3 = 'X'.
      BAPI_MLGNX-LEQ_UNIT_1 = 'X'.
      BAPI_MLGNX-LEQ_UNIT_2 = 'X'.
      BAPI_MLGNX-LEQ_UNIT_3 = 'X'.
      BAPI_MLGNX-UNITTYPE_1 = 'X'.
      BAPI_MLGNX-UNITTYPE_2 = 'X'.
      BAPI_MLGNX-UNITTYPE_3 = 'X'.
Preencimento de dados Relativos a MBEW
BAPI_MBEW,
BAPI_MBEWX,
      BAPI_MBEW-VAL_CLASS = IT_MATMASTER-BKLAS.
      BAPI_MBEW-PRICE_CTRL = IT_MATMASTER-VPRSV.
      BAPI_MBEW-STD_PRICE = IT_MATMASTER-VERPR.
      BAPI_MBEW-PRICE_UNIT = IT_MATMASTER-PEINH.
      BAPI_MBEW-VAL_AREA = 'CLPS'."IT_MATMASTER-BWKEY.
      BAPI_MBEWX-VAL_AREA = 'CLPS'."IT_MATMASTER-BWKEY.
      BAPI_MBEWX-VAL_CLASS = 'X'.
      BAPI_MBEWX-PRICE_CTRL = 'X'.
      BAPI_MBEWX-STD_PRICE = 'X'.
      BAPI_MBEWX-PRICE_UNIT = 'X'.
---------------------------------------------------> Material Descrition
      IT_MATERIALDESC-LANGU = sy-langu. "'EN'.
      IT_MATERIALDESC-MATL_DESC = IT_MATMASTER-MAKTX.
      APPEND IT_materialdesc.
Gross Weight, Volume and EAN
*Volume é preciso uma rotina de conversão
      CALL FUNCTION 'CONVERSION_EXIT_CUNIT_INPUT'
        EXPORTING
          INPUT                = IT_MATMASTER-VOLEH
LANGUAGE             = SY-LANGU
       IMPORTING
         OUTPUT               = VolumUnitConv
       EXCEPTIONS
         UNIT_NOT_FOUND       = 1
         OTHERS               = 2
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'CONVERSION_EXIT_CUNIT_INPUT'
        EXPORTING
          INPUT                = IT_MATMASTER-MEINS
LANGUAGE             = SY-LANGU
       IMPORTING
         OUTPUT               = UnitConv
       EXCEPTIONS
         UNIT_NOT_FOUND       = 1
         OTHERS               = 2
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      IT_UOM-GROSS_WT = IT_MATMASTER-BRGEW.
      IT_UOM-ALT_UNIT = UnitConv.
     IT_UOM-ALT_UNIT_ISO = IT_MATMASTER-GEWEI.
      IT_UOM-UNIT_OF_WT = IT_MATMASTER-GEWEI.
      IT_UOM-EAN_UPC = IT_MATMASTER-EAN11.
      IT_UOM-EAN_CAT = IT_MATMASTER-NUMTP.
      IT_UOM-VOLUME = IT_MATMASTER-VOLUM.
      IT_UOM-VOLUMEUNIT = VolumUnitConv.
     IT_UOM-VOLUMEUNIT_ISO = IT_MATMASTER-VOLEH.
      APPEND IT_UOM.
      IT_UOMX-ALT_UNIT = IT_MATMASTER-MEINS.
     IT_UOMX-ALT_UNIT_ISO = IT_MATMASTER-GEWEI.
      IT_UOMX-GROSS_WT = 'X'.
      IT_UOMX-UNIT_OF_WT = 'X'.
      IT_UOMX-EAN_UPC = 'X'.
      IT_UOMX-EAN_CAT = 'X'.
*Volume
      IT_UOMX-VOLUME = 'X'.
      IT_UOMX-VOLUMEUNIT = 'X'.
     IT_UOMX-VOLUMEUNIT_ISO = 'X'.
      APPEND IT_UOMX.
      CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
        EXPORTING
          headdata             = BAPIMATHEAD
          CLIENTDATA           = BAPI_MARA
          CLIENTDATAX          = BAPI_MARAx
          PLANTDATA            = BAPI_MARc
          PLANTDATAX           = BAPI_MARcx
          VALUATIONDATA        = BAPI_MBEW
          VALUATIONDATAX       = BAPI_MBEWX
          WAREHOUSENUMBERDATA = BAPI_MLGN
          WAREHOUSENUMBERDATAX = BAPI_MLGNX
          SALESDATA            = BAPI_MVKE
          SALESDATAX           = BAPI_MVKEX
        IMPORTING
          RETURN               = IT_RETURN
        TABLES
          MATERIALDESCRIPTION = IT_MATERIALDESC
          UNITSOFMEASURE       = IT_UOM
          UNITSOFMEASUREX      = IT_UOMX
          MATERIALLONGTEXT     = text
          TAXCLASSIFICATIONS   = it_MLAN.
      if it_return-type eq 'S'.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
     endif.
     WAIT UP TO 10 SECONDS.
      WRITE : / IT_RETURN-MESSAGE.
      CLEAR: IT_MATERIALDESC[],
             IT_UOM[],
             IT_UOMX[],
             it_MLAN[],
             IT_RETURN,
             text,
             BAPIMATHEAD,
             BAPI_MARA,
             BAPI_MARAx,
             BAPI_MARc,
             BAPI_MARcx,
             BAPI_MBEW,
BAPI_MBEWX,
BAPI_MLGN,
BAPI_MLGNX,
BAPI_MVKE,
BAPI_MVKEX
    ENDLOOP.

Upload Material Master using LSMW BAPI BUS1001006-SaveData

Hi Gurus,
I'm working with material master upload using the BAPI BUS1001006-SaveData.
I'm wondering on how can I know what structure should I populate on step 4 of LSMW "Maintain Field Mapping and Conversion Rules".
Seen some tutorials on material master upload but it wasn't explained there why or what structure should be populated..
Thanks and Regards.

I just check each structure one by one to which the field is appropriate depending on its description....

Problem in uploading material master data using BDC?

Hi all,
I am using BDC call transaction method to upload material data. Here i am facing a problem that a value in the flat file is going to the wrong screen field . But my recording done properly.
In recording, after entering the data in the view BASIC DATA1 and trying to enter the text . For this i need to scroll down the scroll bar and after that i am clicking on basic data text and entering the text. Here i am not touching the languge field.
But the problem is the text to be entered into the basic data text is storing in language and giving error.
Please help me by specifying the reason and solution for this problem? Whether i did any mistake in recording in scrolling?
Thanks,
Vamshi.

Hi
Go with BAPI for such huge transactions and screens. Use BAPI: BAPI_MATERIAL_SAVEDATA.
Regards,
Vishwa.

Error While Uploading Material Master Through Bdc Call Transaction

Hi Sap Gurus,
I am doing Bdc call Transaction for Material Master Uploading.
But After Entering data for 4-5 screen i got a error_
Field Mara-iprkz doesn,t exit in the screen saplmgmm 4000
Field Mara-prctr doesn,t exit in the screen saplmgmm 4000
Field Mbew-stprs doesn,t exit in the screen saplmgmm 4000
Field Marc-mtvfe doesn,t exit in the screen saplmgmm 4000
Enter Valuation class.
This is my Programme....................................
<removed by moderator>
Thanks in advance.
Arindam
Moderator message: please post only relevant code parts, your post must be less than 5000 characters to preserve formatting.
Edited by: Thomas Zloch on Apr 16, 2011 9:29 PM

Sorry for my obvious answer, but you should ask a more precise question.
Your errors are that you try to enter fields but they don't exist, so it sounds logic.
And the error "Enter Valuation class." means that the field is mandatory. So you must enter it.
Re-record the transaction using SHDB (eventually play with the http://wiki.sdn.sap.com/wiki/display/ABAP/Recordduringplay), run it in A display mode, and correct your program.
Sandra
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'MVKE-SKTOF'
                              'X'.
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'MARC-PRCTR'
                              wa_mara-prctr."'MUMBAI'.
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'MARA-IPRKZ'
                              'D'.

Unable to use SCAT to upload material master in ECC 6

Similar Messages

Maybe you are looking for