Unable to view components in Object Browser & Properties window- Xcelsius

Hi - I have prepared a dashboard which consits of many labels and just a few components. But as I proceed with taking more components on the dashboard ,I am unable to see the components in the object browser and properties window (it is just visible placed on the canvas but not visible in obj browser and Property window)....can any1 suggest the reason and how to proceed ?

HI,
Check in the object browser, whether there is any group element. if all your components are grouped, then they will appear under that group. if you click on any component which is grouped the property window of the group will be displayed.
if you want to see the propery of each individual component, in the object browser-- expand the node and double click the component to see its properties.
hope this helps
uma

Similar Messages

Unable to view planned order from exceptional summary window

Hello All,
I have ran ASCP plan and it details out the exceptions and recommendations, but I am unable to view planned order from exceptional summary window>recommendations>cilck discrete jobs, no planned orders visible. This issue also shows up for other exceptions, on click of exceptions details it shows up the items but unable to take any actions.
I have tried by giving large no of days to view recommendations in preference.
Can someone help me to reslove issue.
Thanks,
Edited by: user604737 on Jul 18, 2011 6:09 AM

We don't have any query built on the exceptional window. As I am able to view below recommendations
Recommendations
Discrete Jobs 8
Purchase Req 27
When we click on discrete jobs/purchase req, its not showing any planned orders in supply window.
Can you please let me know, which is the backend table which stores supply information which are displayed in exceptional window.
Edited by: user604737 on Jul 18, 2011 9:15 AM

Cannot add new components in Object Browser

Hi,
We have a complex file with about 80 components. The problem is that when I try to add new components, they're not visible in Object Browser. It's possible to drag components into canvas, but not only they don't appear in object browser but also vanish after saving and re-opening the file.
No error messages or hang-ups. It's just as if adding become disabled or something.
I'll appreciate nay help on this

Is the new component hidden in the grouped objects, can you see it in the Objects browser?
You can drag a component out of a grouped object from within the object browser. Select the component and drag it up onto the grouped component name, it should then be outside of the grouping.
What version of Xcelsius are you using?
Regards
[Charles|http://www.reportex.co.uk/xc_waterfallchart.html]

Unable to view video files in browser :[

Does anyone know why Safari is unable to view video files in the browser ??? I used to be able to view .mpg video files right in the browser and when viewing .wmv files Safari would open up Windows Media Player which would then play the file. I really dug that feature. Now when clicking on a .mpg video file, Safari simply downloads the file to my HD and that's it. Is there an easy fix for this issue ??? Hello !!! Anybody ???

Tell the QuickTime plug-in to play the file inside a browser window.
Open System Preferences/QuickTime and click the Advanced tab. Click the MIME Settings button and then put a check mark in MPEG media.
Quit and relaunch your browser for these changes to take effect.

What is the red block on left of Materialized View in SQL Object Browser

Hi
In APEX 4.0 i have a few Materialized Views - all work fine, but when I view them in the SQL Workshop Object Browser, a little red block appears on the left hand side of the MV name.
I'm curious to know what this might mean.
Thanks
Mike

Hi Jari
That is what is puzzling me, because if I examine the Details tab of the particular MV it shows as VALID.
The same shows when I run in SQL:-
select status
from all_snapshots where NAME = 'MV_NAME';
The status is valid.
It is not a problem - just puzzling?!
Thanks anyway.
Mike

Unable to view content on CD, Viewable in windows but not on Mac

I am unable to view the contents on a cd I made a while ago on a MS machine.
In finder the CD has two folders both are empty (mp3's) and under the folder it says no items.
I can see the files on the ms machine and on my mac through a terminal shell.
I could even copy files using terminal onto my mac but when I check them the files are smalller-under a meg.
The cd is formatted in ISO 9660 juliet. These files are accessable in windows.
Can someone explain this to me? I must have a bad setting because I searched this forum and found no posts related to my problem.

Hi
After applying the steps given by Steve Fan, to verify the indexing status, please follow these steps: -
If the
Indexing Status reports 0 items remaining and Instant Search is still not returning the correct search results, exit Outlook and restart your computer. When you start Outlook again, verify that Outlook is indexing your items
properly by doing the following:
On the
Tools menu, point to Instant Search, and then click
Indexing Status.
Alternatively, click the arrow in the
Instant Search pane, and then click Indexing Status on the menu.
Verify that the number of items in the
Indexing Status dialog box has increased. If the number has not increased, you must wait until indexing is complete for the results.
If you are not getting results after restarting, the next step is to rebuild your search catalog. The search catalog is a file where all of your Outlook and Microsoft
Windows items are indexed. To rebuild your search catalog, do the following:
Exit Outlook.
In Microsoft Windows, click the
Start > Control Panel.
Windows Vista: click
System Maintenance > Indexing Options.
Note: In the classic view, double-click
Indexing Options.
Microsoft Windows XP: Under
See Also, click Other Control Panel Options, and then click
Indexing Options.
Note: In the Classic view, double-click
Indexing Options.
Click
Advanced.
Click Rebuild.
Restart Outlook.
Regrads
Ashish@V

WD MYBOOK LIVE - Unable to access "Public" share by browsing from Windows Explorer: A solution

My Problem: While trying to browse my Public share over the local network with windows explorer (the standard file browser) I was presented with a dialog box asking for a user name and password. None of the configured username and password combinations worked. My Solution: I found a tutorial at the following link, http://community.wd.com/t5/My-Book-Live/GUIDE-Fix-Dashboard-Errors-3xxxx/m-p/513954 which instructed on how to perform a factory restore without losing data. I was reluctant to try this because I was still afraid of being at risk of losing my data. Looking around, I found a script called setSharePublic.sh which allowed me to reset the status of my 'Public' share to public. I ran the script and it worked without a loss of data. I can now browse to my public share over the network with Windows Explorer. I followed the referenced tutorial all the way through step 4. The new step 5 is as follows: 5) Now at the MyBookLive:~# prompt you are going to type
/usr/local/sbin/setSharePublic.sh Public And I abondoned all further steps. I was able to browse on in without waiting or rebooting. It might be useful to note, though I am not sure if it is of any consequence, that my computer is on workgroup HOME and my WD MY BOOK LIVE is on the same workgroup.

Hello and welcome to the WD community.
Thanks for sharing this with the community hopefully this helps other users with similar problems solve it as well.

Only when i use firefox am i unable to view photos in my albums on windows live...please help?

When using my windows live (with firefox) all the photos in my albums appear as grey boxes.

See:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
It is possible that you clicked "Block Images" in the right click context menu while trying to save an image. 
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions 
See [[Options window - Content panel]] 
*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Open the Media tab of the "Page Info" window.
*Select the first image and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

Properties window and Object Browser window not visible anywhere

Although "Properties" and "Object Browser" are ticked in the View menu, the windows do not appear anywhere on the screen (yes I have looked everywhere). The "Components" window appears as normal. It does not matter what Xcelsisus file I am working in, as the problem is the same even when I first launch Xcelsius. I was running Xcelsius Engage 2008 with Office 2003 and did not have this problem. I recently upgraded to Office 2007 and now I have this problem. I run the same software on my notebook without any problem. Very frustrating. Any ideas on how to fix the problem? Thanks JR

Hi JR,
This should be something simple. Please use the shortcut to get focus to :Object Browser" by pressing Ctrl+4, If you are unable to spot the object brower, it must be minimised eighter of the corner of Xcelsius window.
Use "Restore Dwon" button which will be at the right top corner (before Close Button) so that your Xcelsius window become smaller size. Try to find the border of the working window and make it smaller in all 4 sides using mouse. You will find the Object Browser, Property window somewhere.
Please revert if this does not helps you.
With best wishes
BaaRaa.

Unable to view options in TOAD

Hi,
Please excuse me if my question is not related to this category ....
My problem is unable to view the EDITOR & SCHEMA BROWSER in different tabs at the bottom
And whenever i open the schema browser it's getting overlapped on to the EDITOR ....
So each and every time i need to minimize one tab and use the other...
Please tell me the options to set this proper...
Thank you

YOu can use the option Tile horizontal or tile vertical in the window tab of the Toad. by default it will always overlap and there will be task bar below the browser from where you can toggle between the opened windows in Toad.
But for now youcan use tile horizontal or tile vertical.
Regards

YOUTUBE: unable to view youtube videos through bro...

YOUTUBE: unable to view youtube videos through browser.
since I updated to Symbian Belle, I'm now unable to view youtube videos through my browsers.
I tried both the native browser and opera mobile browser.
Site: m.youtube.com

Have you tried reinstalling the update?
Please connect your device to Nokia Suite and reinstall the current firmware from the updates tab. If that does not do the trick, please fully back up your data (Tools > Back up). And hard reset device: type *#7370# on the keypad. Default lock code is 12345.
Feel free to let us know how you get on and post other questions in the relevant boards.
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Unable to view image in HTMLDB SQL Workshop Object Browser

Table: DEMO_IMAGES
Image Id:
Image Name: Bill.JPG
Mime Type: image/pjpeg
Image: Unable to display page region ORA-00932: inconsistent datatypes: expected NUMBER got BLOB
Debug:
1: begin
2: wwv_flow_sw_page_calls.edit_row(:OBJECT_NAME,:OB_SCHEMA,:F4500_P47_ID);
3: end;
Any help appreciated.. Bill

HI,
Check in the object browser, whether there is any group element. if all your components are grouped, then they will appear under that group. if you click on any component which is grouped the property window of the group will be displayed.
if you want to see the propery of each individual component, in the object browser-- expand the node and double click the component to see its properties.
hope this helps
uma

The Crystal Report Viewer is unable to create its resource objects

Recently our Clients have updated to Windows 7 and IE8. we are having issues to view the Reports in Infoview.
The web server operating server is Windows 2003, Crystal Reports XI Release 2 and BOE R2 SP2 is installed in it. Activex Viewer is downloading fine in client machine having Windows XP OS (IE Version is 7) but for the same url ActiveXViewer.cab is not getting downloaded in Windows 7 Enterprise (IE Version is 8). It throws the error u201CThe Crystal Report Viewer is unable to create its resource objects.u201D
Does BOE R2 SP2 support on IE8?
Thanks

Tested Windows 7 And IE8 browser to view Reports in Infoview for different user preference setting.
1.       Active X Viewer u2013 Fails to open in View Mode and errors out with message as u201CThe Crystal Report Viewer is unable to create its resource objectsu201D
2.       DHTML Viewer u2013 Could able to open/export/print the Report.
3.       Advance DHTML Viewer - Could able to open/export/print the Report .
4.       Java Viewer u2013 Could able to open/export/print the Report, but noticed the fonts are overlapping.

"Crystal Report Viewer is unable to create its resource objects"

I'm using Crystal Reports Server XI and getting the error/pop up box: "Crystal Report Viewer is unable to create its resource objects" when trying to view a report through the website.
Any suggestions would be appreiciated. I'm very unfamiliar with Crystal Reports but it's fallen into my lap to install and suppor this application.
I have tried changing some browser settings to allow ActiveX content and such but that hasn't seemed to help. I also tried downloading a particular 3 .dll's files to my desktop and registering them, as well as re-registering them on the server. They were CRVIEWER.dll, swebrs.dll, sviewhlp.dll.
I'm using IE 7.0 and CR Server XI is installed in a Windows 2003 R2 SE server. IIS seems to be setup OK. I haven't changed any of the default installation settings that were configured during the installation on the virtual directory that was created. I received no errors during the installation. I'm also not seeing anything obvious pop up in the event logs. I still have yet to do a log parser query looking for anything that says crystal reports.
Thanks!
Edited by: Wendy Beatty on Sep 23, 2008 9:50 PM

Hi Wendy,
This issue might be better addressed by our .NET development forum, however, some of the things that come to mind are:
1. As a test are you able download the Active X Viewer from the client machine by accessing it via a URL:
http:// <yourserver>/crystalreportviewers/ActiveXControls/ActiveXViewer.cab
Does it prompt you do download the .CAB file?
2. If you have more than one version of the Active X Viewer installed on the client machine, go through this SAP Note (1215398) from the Service Market Place to remove it.
3. Check your browser settings (Tools|Security|Custom Level) to make sure Active Controls are set to at least prompt.
4. Confirm with your network administrator if there are group policies that restrict the installation of Active X Controls or if users do not have the rights to install.
Regards,
Wallie

Apex 4.0 - Can see view data in SQL*Plus but no data in Object Browser

Hi There,
I have just started using Apex 4.o and migrated some apps. I have an issue with a report, but see the same issue with Object browser, which is easier to describe.
I have a view:
create or replace view V_PLJ_USERDEF_CODES (
         CODE_SET_ID,
         CODE_SET_CODE,
         CODE_SET_DESC,
         CODE_ID,
         CODE_SYS_CODE,
         CODE_VALUE,
         CODE_DESC,
         DISPLAY_SEQ,
         DISPLAY_FLAG,
         LANGUAGE_CODE) as
select CS.CODE_SET_ID,
         CS.CODE_SET_CODE,
         CS.CODE_SET_DESC,
         C.CODE_ID,
         C.CODE_SYS_CODE,
         C.CODE_VALUE,
         C.CODE_DESC,
         C.DISPLAY_SEQ,
         C.DISPLAY_FLAG,
         C.LANGUAGE_CODE
    from PLJ_CODES C,
         PLJ_CODE_SETS CS
   where C.CODE_SET_ID         = CS.CODE_SET_ID
     and CS.CODE_SET_TYPE_CODE = SYS_CONTEXT('PLJUMPSTART','C_USERDEF_CODE_SET');This returns data in SQL*Plus, but no data in Object Browser OR report region based on this view.
Workspace parses in the same schema as tested in SQL*Plus.
If, in report, I swap out view, and use underlying table - no problem.
Any ideas -
thanks
P

Hi all,
Thanks for getting back so promptly.
It just seems weird to me, as tables are just fine, but not views.
In the underlying schema:
SQL> sho user
USER is "ICSREPORTING"
SQL> select count(*) from plj_codes;
COUNT(*)
       107
SQL> select count(*) from v_plj_userdef_codes;
COUNT(*)
        29And in the APEX schema
SQL> sho user
USER is "APEX_040000"
SQL> select count(*) from icsreporting.plj_codes;
select count(*) from icsreporting.plj_codes
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> select count(*) from icsreporting.v_plj_userdef_codes;
select count(*) from icsreporting.v_plj_userdef_codes
ERROR at line 1:
ORA-00942: table or view does not exist
SQL>However, in SQL browser, I can see the data in PLJ_CODES but in V_PLJ_USERDEF_CODES, just the message "This view has no data". Indeed, it is like this for all views.
I even explicitly granted access to APEX_040000 but no good.
In fact, I would like to know more about how Apex gets access to do DML against the underlying parsing schema(s).
This is a little frustrating though. It worked just fine in lots of apps in version 2.1 to 3.2
Am I missing something
paul
p.s I knew there would be a question about the context, but I had already checked that. :)
Edited by: PJ on Nov 19, 2010 4:09 AM

Unable to view components in Object Browser & Properties window- Xcelsius

Similar Messages

Maybe you are looking for