Unable to view entries in FAGLL03 for Zero Balance Clearing Account

Hi experts,
We are facing a unique problem. We are not able to view the line items of the Zero Balance clearing account. The master data of the G/L has been activated for line items but still the display of the items is not happening. I am getting the foll message:
Account 19900000, company code 1100 is clearing account
Message no. MSITEM111
Diagnosis
You have stored account 19900000 in company code 1100 as a clearing account. At the same time, you use line item management with this account.
System Response
Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
Procedure
Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.
Regards,
Sateesh

Hi
In splitting case you need not the give the line item display tab for Zero Balance Clearing Account.
Just remove that line item display in FS00 for Zero Balance account. You could be able to see the entries in FAGLL03
Regards
Sandeep

Similar Messages

  • Zero Balance Clearing Account for New GL

    Hi SAP Gurus,
    We have one unique situation for zero balance clearing account for New GL.
    We have one global chart of account to which all company codes are assigned. We implemented document splitting with zero balance clearing for 1 splitting characteristics.  We defined clearing account for zero balance for the same as well.
    We need to post to different account only for one company code for zero balancing while other company codes will be posting to same clearing account.  But as per me, we can only define one GL Account per Chart of Account for zero balancing.
    Pls. suggest if you have any solution to this situation.
    Regards,
    Chirag

    Hi,
    Do you have a business rationale for this requirement? Apparently you are using the same Chart of Accounts and hence cannot assign a different GL Account.
    This account will always have zero balance at GL Account level and will not be relevant to your legal reporting. A better solution would be to use the one account that all company codes can agree upon and use.

  • How to findout line  items of zero balance clearing account?

    Hi Friends,
    my zero balance clearing account shows balance.
    we have 6 business areas and document splitting activated.
    Trial balance is matching at co.code level.but its mis matching at business area level.
    Line item management is checked in the master data of zero balance clearing account.
    How to find out the line items of the zero bal.clearing account so that i ll get the relevant business area amount and ll pass journal entry accordingly and ll get the balanced trial balance at business area level.
    What is the table for zero balance clearing account line items?
    suggest.
    Regards,
    Sumeay

    Dear
    I am also facing the same problem. We are having 7 business areas. Trial balance is tallied even at busness area level. However, the zero balance clearing account is showing balance in each business area ( we can say "inter business area balncess.").
    Please help
    Regards.

  • Zero Balance clearing account shows balance?

    HI All,
    My "zero balance clearing account" shows balance and hence my trial balance is not matching.
    We have posted some WA(goods receipt) documents from MM side and cancelled those due to wrongly entered of internal order in those documents.And Debit line item is missing in those cancelled documents and hence credit amount is showing in my zero balance account.
    How can i get rid of this problem and match my trial balance ?
    Regards,
    Sumeya Offrin

    Hi Sumiya,
    Check the Trial Balance GL Line Item wise through FAGLL03/FBL3N - G/L Account Line Items.
    If any correction reverse the Entry do it again.
    One more Check the MM Transactions All materials are reversed are not.
    Check the Stock Balance in MB5B through GL Wise Stock Account.
    Regards,
    Kishore K

  • Zero-Balance clearing account - account determination

    Hi all
    For the different accounting principle (US GAAP / IAS and so on) we do not use the ledger solution, we use the account solution.
    There numbering for the accounts is as follows:
    xxxx00 accounts for all accounting principles
    xxxx01 accounts for US GAAP
    xxxx02 accounts for IAS
    xxxx03 accounts for local GAAP
    In the same way, we set up the cost elements for assessment (e.g. 920'003) and the corresponding GL-account for the backward integration from CO -> FI (e.g. 930'003).
    Requirement:
    For the profit center, the must be establised a complete balance sheet and P&L statement. This for all 3 accouting priniples.
    Means we need a complete P&L statement und balance sheet per profit center for US GAAP, IAS and local GAAP.
    Problem:
    As soon as a cross profitcenter assessment is done in the CO-OM (form cost center A to cost center B), there is a booking on the zero-balance clearing account.
    In the customizing you can just set one single zero balance clearing account (in our case 199'990). But for a correct setting up of the 3 accounting principles we should be able to customize different zero-balance clearing accounts:
    Example:
    in CO-OM (cost center assessment)
    Profitcenter A: -100 cost element  920'003
    Profitcenter B: +100 cost element  920'003
    in FI-module (backward integration CO to FI):
    Profitcenter A: -100 GL account 930'003 -> ok
    Profitcenter A: +100 GL account 199'990 -> Problem  -> should be 199'993
    Profitcenter B: +100 GL account930'003 -> ok
    Profitcenter B: -100 GL account 199'990 -> Problem  -> should be 199'993
    If you could set up different zero balance clearing accounts, then you could print out the balance sheet and P&L statement in the FI module per profit center as follows:
    US-GAAP:  accounts xxxx00 and xxxx01
    IAS:            accounts xxxx00 and xxxx02
    local:          accounts xxxx00 and xxxx03
    Swiss GAP FER: xxxx00 und xxxx01 Konten
    Steuer: xxxx00 und xxxx02 Konten
    kalkulatorisch: xxxx00 und xxxx03 Konten
    Thanks very much for any input.
    Pius

    Dear,
    If I understood your requirement correctly then you want different ZERO balance clearing GL Account for below type  GL Accounts
    xxxx00 accounts for all accounting principles
    xxxx01 accounts for US GAAP
    xxxx02 accounts for IAS
    xxxx03 accounts for local GAAP
    Please correct me if I am wrong. If correct then you can post accounting entries to different GL Account by using Substitution OBBH. You have to decide the pre-requisite and on the basis of that you can write the substituon.
    Hope this helps.
    Br,Vivek

  • Problem with document splitting and zero balance clearing account

    Hi SAP Gurus,
    We've already configured the document splitting functionality in our project, however we still encounter some issues with the outcome of posting documents. For some scenarios, the document split functionality seem to work. Below is such example
    Scenario # 1
    Entry View:
    40  Expense (cost ctr 0001)
    31  AP
    GL view:
    40 Expense (cost ctr 0001)
    31 AP (cost ctr 0001)
    However, whenever 2 GL items are included in the document, the document split functionality acts differently.
    Scenario # 2
    Entry View:
    40 Expense # 1 (cost ctr 0001)
    40 Expense #2 (cost ctr 0002)
    31 AP
    GL view:
    40 Expense # 1 (cost ctr 0001)
    40 Expense #2 (cost ctr 0002)
    31 AP (no cost ctr assignment)
    40 Zero Balance Clrg  (no cost ctr assignment)
    50 Zero Balance Clrg (cost ctr 0001)
    40 Zero Balance Clrg (no cost ctr assignment)
    50 Zero Balance Clrg (cost ctr 0002)
    I was just wondering how come the AP item did not split accordingly to the cost center indicated in the entry view. Can anyone please assist me on this one? Thanks in advance and best regards.

    Hi Milind,
    Thanks for the reply.
    I've done the below configuration and assigned cost/profit center update. It now works for profit center split. It still does not split accordingly per cost center though.
    SAP Customizing Implementation Guide > Financial Accounting (New) > Financial Accounting Global Settings (New) > Ledgers >Ledger > Assign Scenarios and Customer Fields to Ledgers
    In the below configuration, cost center is not an available option. Unlike the profit center which is available here.
    SAP Customizing Implementation Guide > Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Define Document Splitting Characteristics for General Ledger Accounting
    The profit center split looks fine now, however the cost center split still is only reflected in the expense items and not on the AP item.
    Any ideas on how to actually split the AP line items according to the cost center assignments ?
    Edited by: Patrick on May 9, 2011 7:46 AM

  • Nature of GL for Zero Balance Document splitting & CO-FI reconciliation

    Dear Experts
    1. What should be the nature of GL account for Zero Balance  Clearing A/c for document splitting? Should it be P&L or B/S?
    Should it be on open item managed? I've read note 961937 but it doesnt talk about it.
    2. Also what should be the nature of GL required for CO-FI real time integration? P&L or B/S? If its P&L then should cost element be created for it?
    Please advice?
    Regards
    Kapil

    Hi,
    1. Zero Balance Clrng Account: Balance sheet and Open item managed
    2. CO-FI Intrgration account: P/L account and Line item display
    Thanks

  • Unable to view HCM adobe forms for one employee in sap portal

    Dear Sap Gurus,
    we are Unable to view HCM adobe forms for one employee in sap portal.
    Regards
    Srinivas

    Hi,
    What error you getting? Did the user has the authorisation? Is his system has Adobe installed?
    Please perform normal checks.

  • HT5731 I purchased doc mcstuffins on the iPad. Downloaded several times which takes at least a day to do. Still unable to view episodes. Akers for a frustrated mommy & 3yr old. Did I just waste $30????

    I purchased doc mcstuffins on the iPad. Downloaded several times which takes at least a day to do. Still unable to view episodes. Akers for a frustrated mommy & 3yr old. Did I just waste $30????

    El3ees wrote:
    I will be taking my laptop in on monday morning again and im assuming i will be waiting for another 4 weeks maybe more.
    Don't take your laptop back. Find out the number for Apple Care in your part of the world and call them. Tell your story to them. If the person on the phone can't help you, ask for their supervisor. Keep asking for supervisors until you get exactly what you want to get. If that mean you want to get the problem fixed without having the computer gone for four weeks, then keep asking for supervisors till you get someone who can do that for you.
    Be prepared to be on the phone for a while, so arrange a speaker phone, water to hand etc. Be patient.
    As for "crappy computers"--my MBA has worked flawlessly since the day I got it. As good if not better than any Apple laptop I've ever had, and I've had several.This is the thing though, there is a percentage of failure rate that occurs in electronics. It occurs whether we're talking about televison sets or toasters. If it's electric, it has that failure rate. Now sometimes a thing will be bad and in that case the word gets out and everyone knows that particular electronic has surpassed the normal failure percentage. The Airs, however, have not done that. Their reputation, so far, has been incredibly solid and good. So you can assume that you, unfortunately, got one out of that small percentage of electronics that have an issue.
    Laptops, let us remember, are doing a lot in a very small area. A lot can go wrong, and it's pretty amazing how many don't, especially given how many are made and sold. Sometimes we get the bad apple in the barrel, it doesn' t mean that the company making it has gone down hill. We hope the manager of the store, or the company, or someone will do right by us. If they don't, then we need to make sure they do. Keep asking for upper management till you get what you want.

  • MIRO for freight: freight clearing account not getting debited

    All SAP Gurus,
    We are doing MIRO for planned delivery cost (freight) and facing some problem in account determination.
    Actually the ideal cycle goes like this:
    The stock account is debited with the planned delivery costs at goods receipt and the system makes the offsetting posting to a freight clearing account. This posting is then cleared by an offsetting entry to the vendor account at invoice receipt.
    In our case accounting  entries are going correct at the time of GR.
    But at the time of MIRO insted of freight clearing account, stock account is again getting debited.
    Where may be the problem?
    Please help.
    Regards,

    Hi
    Check what are the debit and credit accounts for Freight transaction key in OBYC (check corresponding account key for freight condition in pricing procedure). If you maintain them correctly (generally we only maintain one GL account without specifying debit/credit in OBYC), then entry should be GR/IR freight clearing account debit at time of MIRO.
    Check the accounting entry in MIRO - the posting keys you are seeing (when you scroll to right hand side in accounting document you can see transaction).
    Thanks

  • Can we create a cost element for a Balance Sheet account?

    Hi folks,
    Is it possible to create a cost element for a balance sheet account? If yes, what are the scenerios we would need it and how is it done?
    thanks in advance

    Hello
    Please review the below information regarding cost elements category 90 : Financial Accounting Balance Sheet Accounts                                                                               
    Category 90  is automatically assigned when you create cost elements in CO whose   general ledger accounts in FI are asset reconciliation accounts            
    (special balance sheet accounts), not income statement accounts. You       
    cannot change this category in CO master data maintenance.                                                                               
    FI does not require CO account assignments to cost elements of             
    category 90. However, if you enter an account assignment, it is only       
    recorded statistically for real objects.                                                                               
    Category 90 allows you to check order or project budgets for fixed         
    asset procurement. To do so, enter the investment order or WBS element     
    in the corresponding field in the asset master. The Asset Management       
    component ensures that the order or element automatically appears in       
    the document when you access the asset procurement.                        
    The R/3 System debits the order/WBS element statistically in the           
    Controlling component, which you can then monitor with availability        
    control.                                                                   
    You can treat cost elements of category 90 as activity-independent as      
    part of cost center planning. 
    Also see note 75980  for further information.  From the note:
      The use of cost element category 90 is only provided in the standard        
      system in the following two cases:                                                                               
    1.  As of Release 3.0G, asset acquisitions and down payments which are      
          assigned directly to a fixed asset or asset under construction can      
          be assigned to an account on internal orders or WBS elements            
          statistically. In this manner, for example, an availability check       
          can be triggered on the order or the WBS element for asset posting.                                                                               
    2.  As of Release 4.0, cost elements of category 90 can also be created     
          for material stock accounts to display material make-to-order stocks    
          on sales orders or customer projects.                                   
    Regards
    Javier Reviriego

  • Unable to View low level items for Phantom Assembly - Order created in APO

    Hi All,
    I am unable to view the sub items when I create planned orders in APO and production orders in ECC. But when the order for the same material is created in ECC, I can see all the sub items. I see that this issue is only for Phantom Assemblies.
    And I cannot say that all the items in the Phantom do not appear, actually some of them do appear in BOM explosion.
    For example:
    Pld Ord is created for A in APO
    Prd Ord for A is created in ECC
    A has B, C and F as requirements
    and  B is phantom
    B has D and F as requirements
    Then my BOM explosion shows
    ..1 B
    ..2 D
    ..1 C
    ..2 D
    ..2 E
    ..1 F (This only gives the quantity required to make A)
    But it should also list how much of F (..2 F) is required to make B.
    Where as it comes up in ECC.
    Do I need to change the material settings for Phantom or is it just the UOM that is creating an issue?

    Hi All,
    I am unable to view the sub items when I create planned orders in APO and production orders in ECC. But when the order for the same material is created in ECC, I can see all the sub items. I see that this issue is only for Phantom Assemblies.
    And I cannot say that all the items in the Phantom do not appear, actually some of them do appear in BOM explosion.
    For example:
    Pld Ord is created for A in APO
    Prd Ord for A is created in ECC
    A has B, C and F as requirements
    and  B is phantom
    B has D and F as requirements
    Then my BOM explosion shows
    ..1 B
    ..2 D
    ..1 C
    ..2 D
    ..2 E
    ..1 F (This only gives the quantity required to make A)
    But it should also list how much of F (..2 F) is required to make B.
    Where as it comes up in ECC.
    Do I need to change the material settings for Phantom or is it just the UOM that is creating an issue?

  • Unable to view sent message from one of my email accounts

    I have two email addresses from my email server. On one of the accounts, I am unable to view the text of the messages in the sent mailbox and I get the following message:
    The message from (my email address is shown here) concerning “Insurance” has not been downloaded from the server. You need to take this account online in order to download it.
    The server says there is nothing in my sent box on the server to download. I have selected the choice in the preferences area that says to delete messages from the server "right away" when they are downloaded.

    Patrick,
    If running Tiger, see:
    http://discussions.apple.com/thread.jspa?threadID=413196
    If running 10.3.9, as your Profile says, then you likely have an "Overstuffed" Sent mailbox. See the Topic at the following link, and the topic linked from within it:
    http://discussions.apple.com/thread.jspa?threadID=121837
    and
    http://docs.info.apple.com/article.html?artnum=25812
    Ernie

  • Enhancement LMR1M002 for GR/IR clearing account in MIGO

    Hi ,
    Did anyone implement the enhancement LMR1M002 to change the GR/IR clearing account while using tcode MIGO.
    Please help me how to implement the SAP customer exit , there is a note  SAP Note 301477 and  165692  but I was unable to  code
    Regards
    Prasanth Kasturi

    Discussion moved. Please use Internationalization and Unicode for CIN related queries.

  • Value difference for GR/IR Clearing Account in case of MIGO and MIRO.

    Hello Experts,
    One of our client has asked me about clarification regarding GR/IR Clearing Account shows different values when MIGO and MIRO posting. Scenario is that,
    SEZ
    Calculation of import Duty
    Input goods
    Material Base Value
           2,171,385
    Landing Cost
                 21,714
    For computing Customs landing charges need to be added
    BED @
    10%
               219,310
    Loaded in material cost
    CVD, @
    12%
               289,489
    Credit taken
    Customs Education Cess
    3%
                 15,264
    Loaded in material cost
    ADDL Duty
    4%
               108,686
    Credit taken
    Customs Duty
               632,749
    CVD
    12%
               219,310
    All duty
    4%
               108,686
    Cenvat
               327,996
    CST
           43,427.70
    2214812.7
    Hence Material cost in GR/IR should be Rs. 22,14,813
    Diff (2219092-2214813= 4279)
    Whereas it is taking Rs. 22,19,092
    My concern is that GR/IR Clearing Account consider only Material cost and non deductible tax amount i.e. CST which is loaded on material cost but system consider some different values, please check the above calculation. When user post MIRO in that case system automatically konck off GR/IR Clearing Account and post difference amount i.e. RS. 4279 to Inventory Account which is wrong. I dont know how system behaves in such manner.
    Please giude me on this issue as soon as possible.
    Regards,
    Vishal Jadhav

    Discussion moved. Please use Internationalization and Unicode for CIN related queries.

Maybe you are looking for