Unable to view photos after adjustments (except in preview mode)

I upgraded to Aperture 2.0 and would like the program but for an annoying glitch. Each time I open aperture I can make edits to one or two photos without problems, but then photos start to disappear from the viewer window. There is nothing but a blank canvas where they were. The photos will only reappear after a restart to aperture. The will appear in Preview Mode just fine.
Anyone have any ideas what the problem could be. I recall this happening a few times with 1.5.6, but this is now happening every time I use Aperture 2.0.
Thanks.

yes I get this more often on my Powerbook G4, and have had it a couple of times on my brand new MacBook Pro. With the MBP it's usually half or quarter of the image turning black. With the PG4 it's the whole image turning black. There are several threads on here about this issue with lots of respondents. This issue existed in 1.x and was fixed at some point (was gone in 1.5.6). Sadly it's returned.

Similar Messages

  • Unable to view photos received via e-mail or texting

    Hi,
    I have been unable to view photos that I received via a text message. I do receive the yellow bubble alert telling me to download.  After I hit the download button, it just hangs.  I also attempted to send myself a photo from my work email address by mailing to [email protected]    Again, I received the notification to download the photo and after hitting the download button--nothing!   Am I doing something incorrectly?   A setting to be made perhaps?  FYI, I am running the latest update for the Charge.
    Thx for the help!

    mikemoor wrote:
    Well since nobody here responded, I called Verizon Tech Support directly.  I was instructed to remove the battery while leaving the power on (that's important--do NOT power off!).  Then depress the power button in succession twenty (20) times.  Replace the battery cover and power up as normal.  All fixed!!!    Thanks to "Julius"  at VZW.  Obviously, this is some type of reset sequence for the Charge.
    Depress the power button 20 times with the battery still out or after putting the battery back in?

  • Unable to view planned order from exceptional summary window

    Hello All,
    I have ran ASCP plan and it details out the exceptions and recommendations, but I am unable to view planned order from exceptional summary window>recommendations>cilck discrete jobs, no planned orders visible. This issue also shows up for other exceptions, on click of exceptions details it shows up the items but unable to take any actions.
    I have tried by giving large no of days to view recommendations in preference.
    Can someone help me to reslove issue.
    Thanks,
    Edited by: user604737 on Jul 18, 2011 6:09 AM

    We don't have any query built on the exceptional window. As I am able to view below recommendations
    Recommendations
    Discrete Jobs 8
    Purchase Req 27
    When we click on discrete jobs/purchase req, its not showing any planned orders in supply window.
    Can you please let me know, which is the backend table which stores supply information which are displayed in exceptional window.
    Edited by: user604737 on Jul 18, 2011 9:15 AM

  • Unable to view photos although after sycronising after upgrade to IOS 5.1.

    Hi, I'm unable to view the photos after syncronising although application shows that I've successfully syncronise 9 photos. None can be displayed.This is after upgraded to IOS 5.1.Pls help.

    Completely agree with you, bladddddd.
    There really should be a toggle in the cellular menu to switch between LTE, 3G & 2G. Carriers in some parts of the world may well be switching off the 2G service, but that doesn't apply to everyone & certainly not where I am in the UK.
    I spoke to AppleCare about my problem last month, but they were unfortunately quite hopeless, not knowing that the easiest way for me to recover my original carrier settings in iOS 6.0.2, would have been for me to carry out a full reset & restore from a backup. :(
    I did too pass on my annoyance with the inability to switch back to 2G, should I want to, after an over-the-air carrier settings update has taken place & has subsequently replaced the 3G toggle with the LTE toggle.
    I have also completed the feedback form some weeks ago. I hope others having this same issue will do this too:
    http://www.apple.com/feedback/iphone.html
    Hopefully, Apple may bother to actually take some notice of this problem, which will now affect a lot of iPhone 5 users.
    The next iOS update will hopefully include the ability to override a carrier settings update & falling back to a 2G signal, should users want to, or need to, particularly in order to reduce the strain on the battery.
    Until such an update is released, I'm sticking to iOS 6.0.2 :(

  • Unable to View SMS, Error- Uncaught exception: Index 87 = 87

    Hi
    Pls help - I am unable to view my SMS (Both Sent and Received). Not getting any notification also.  If i compose SMS after sending it disappears.  And I am getting error -Uncaught exception: Index 87 >= 87 everytime i switch on the device. Not able to find the SMS in Messages>View Folder>SMS Inbox also.  I have tried by wiping all applications, device has enough memory- 127MB.  Even Checked Firewall... Pls help...
    Regards
    Sandeep
    Solved!
    Go to Solution.

    Hi sandeep23101985
    Welcome to BlackBerry Support Forums
    There are no specific  Knowledge Base regarding the error Uncaught exception : index 87 >= 87 or similar, As you had already wiped or deleted all applications from your device but still error appearing so to rule out any software issue you can reload your Device OS ,but first do your device backup using BlackBerry Desktop Software,For further instruction please refer to this Knowledge Base :
     KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows.
    After Reload restore your backup.I hope it will solve your issue.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Unable to view catalog after migrating from OBIEE10g to 11g

    Hi All
    I migrated "rpd and catalog" using "Upgrade Assistant" utility (Ora_Home\bin\ua.bat) available in OBIEE 11g. But after migration, I am unable to view my catalog and even create analysis reports in Analysis of 11g.
    Do I need to do something additional. Although I am able to login to repository.
    Thanks..

    Ideally it shud...can you try this tutorial with Sample or Paint objects ??
    http://howtobi.wordpress.com/2011/01/14/upgrading-obiee-10g-content-to-11g/

  • Unable to view photos on iPhone 4S

    Hi,
    There are some photos which I am unable to view on iPhone 4S 64 GB. When I open those photos it opens up with a white screen but I am able to view those in the camera roll. It only happens when I open the picture to view it in the normal size. This photos are taken from the same device. I've performed Reset, refresh but its still the same.
    Regards,
    Amit P

    Hello Bruce,
    Thank you for contacting Apple Support Communities. Since you didn't specify if your issues concerned Wi-Fi or cellular networks, I am providing links to articles on troubleshooting each.
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/TS4429
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Regards,
    Jeff D.

  • Unable to view photos that others post on facebook since upgrade

    was able to view photos that friends posted on facebook until ungraded to current version of firefox. Now those photos are just blank white spaces.

    You can use these steps to check if images are blocked:
    *Open the web page that has the images missing in a browser tab.
    *Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    *Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    *Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    *Select the first image link and scroll down through the list with the Down arrow key.
    *If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.com/kb/Images+or+animations+do+not+show

  • TS4403 unable to view photo stream in windows

    I am unable to view my photostream on my pc.  I keep getting an error that iphotostream stopped working do I wish to debug or cancel I'm not sure how to fix this. It also says that photostream is not enabled in the windows folder, but it has been enabled in the icloud control panel. Thanks.

    You first need to go into the System/iCloud preference pane and activate PhotoStream:
    Then you'll be able to activate it in iPhoto.
    OT

  • Folders Show up in Catalog, but unable to view photos in folders after a certain folder

    System: Windows 7, 32Bit, Core2Duo w/ 2GB Ram, LightRoom 5.5 hooked up to a Nikon D5200 for Tethered capture & review only.  Currently we have 1727 folders and 5530 pictures in the Catalog.
    We use this system to take product images for a website and the images are stored on a mapped drive file server.   Today when trying to review some of the more recent pictures it would not select the folder/open the photos (but you could see the first picture in the folder in the preview window).   I was running LR 5.3 so I upgraded to 5.5 to see if that would fix the problem but it did not.   I am able to see the pictures if I click on the root folder and it works as expected.
    Older folders/pictures work they way they should, but everything taken after Monday did not work. (Monday happens to also be the last day a backup of the catalog was done).   When I revert to Monday's backup all of the folders/images work.  When I try to import the missing folders/pictures into the Monday backup , I have the same issue at the same point.  I have tried creating a new catalog from scratch and have the same problem, however the "break-point" (where I can no longer see inside the folders) changed to a slightly earlier [in the series] folder.  
    I can browse the mapped network drive and see all of the folders/pictures without problem.  I have also tried Synchronizing the folders and optimizing the catalog but neither had any effect.
    Have I hit some sort of folder limit?  I read there was no "hard" limit file/folder limit per catalog, but with the way it is acting, it is almost like I found a hidden folder limit.

    I can see all of the folders in the folder list, just can not click on the last 30-40 so maybe 1700 is limit
    The folders are setup as:  (each folder has 1-4 pictures inside)
    p:/parts_pictures
    p:/parts_pictures/part1/
    p:/parts_pictures/part2/
    p:/parts_pictures/part1727/
    In LightRoom it shows up as
    ->p:/parts_pictures
         - part1
         - part2
         - part3
         - part1727
    (note: I am using the part1, part2, part3 as an example.. the actual folder names are our internal 6 digit ID)

  • Epson 810 printer unable to view photos on iMac

    I recently purchased an Epson Artisan 810 and connected it wirelessly. The printer connects to the iMac OS X 10.5.8 and is able to print, but it is unable to transfer pictures from my memory card to my mac. My memory card is a Memory Stick Pro Duo, 2 GB, the camera is a Sony Cyber-shot. The info from Epson is that a Memory Card icon should show on my desktop,it does not. And according to Epson, since I can see the pics on the Epson screen, I should be able to see them on my Mac. After spending over 45 minutes with an 2 Epson techs, they gave up and said the problem is with my iMac and that I had to call Apple because it is their problem. I did call Apple tech support, but their opionion is that it is an Epson problem, not an apple problem. I don't know whose problem it is except mine, but my cheap old HP never had a problem allowing me to see my pics on my iMac. I have tried installing and uninstalling both wireless and usb drivers, but neither allows a working Memory Icon on the desktop nor any way to view the photos. Sorry for the length of this request. Any help would be appreciated.

    There was another thread on this very same problem some time back; from what I remember, it was not resolved. For one thing, it could very well have something to do with the fact that you have it connected wirelessly; have you tried connecting the printer with a USB cable to see if it works then?
    If you are not wanting to print the pics while the card is inserted in the printer, may I suggest what would be a much easier and simpler solution: download the pictures to your Mac and then control the pictures (and the printer) from there. You could use a USB card reader (very inexpensive), insert it and download them directly - why go through another device.

  • Bug Report - Unable to rearrange photos after importing with XMP.

    Summary: Files that have been 'exported' from another copy of Lightroom by attaching the XMP can then not be rearranged via drag-and-drop.
    System: Windows Vista, Lightroom 1.0
    I have several folders in the Lightroom database. Except for one folder, all of the images in the folders were imported into the Lightroom database directly from the hard drive holding the images.
    For one folder, the original images were first imported into a separate installation of Lightroom (on my laptop), sorted, adjusted, etc, and then the "Export XMP" routine was used for allowing import into the Lightroom database on my desktop. Import took place without any issues.
    Later it was discovered that the images can not be drag-and-drop rearranged in the folder that contains the files that were imported after the XMP export, but that images that are contained within folders that were imported directly into Lightroom can be properly drag-and-dropped.

    Catherine,
    I'm not sure why, but I've also noticed that clips on the viewer don't show up. You can work on them, however, by moving the clip to the timeline. Once its there and selected, it will show up in the Ken Burns window when you click on photo.
    Hope that helps.

  • Am suddenly unable to view photo's in online boutiques...

    The last Mavericks update took out the photo's in my shopping sites AND emails...just updated Flash to see if that helps - it did not.  Am at a loss...I use Firefox, but same issue in Safari.  Any ideas how to fix this?  Thank you!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Unable to view photo browser to import photos

    Friends,
    I'm running FCPX 10.1.  I am unable to easily view the photo browser to import photos.  The screenshot below shows what I see when I click on the photo import pane:
    The screenshot below shows what I see when I click on the under photos to display the entire photo (Aperture) library:
    How can I fix this?
    Thanks!
    Steve

    I also had the same problem. Then I open iMovie, clicked on the iPhoto and Aperture section. When I got back to FCP X my photos, Gearage Band sections were back. But the photo section must be selected before you quit FCP X. Then open open FCP X, and the photos en Garage Band and other audio effects will be back. But when you select another section like themes or transitions before you quit FCP X, the photo section wil be gone again and had to start the procedure again to get it back. That is my experience of the missing photos and audio effects.

  • Unable to view photos in library. I already rebuilt my tumbnail caches....

    I am having the this problem: I can see the photos on the scroll in small view but when I click on a photo to make it large and view it there is a gray screen with a white dotted line around an exclamation point.
    I rebuilt the thumbnail cache, as some earlier discussion suggested. BUT I DID RENAME AND MOVE SOME FILES BY MISTAKE from the Iphoto library, which I tried to revert to its original settings, but its still unnable to link the tumbnails to the photos. Is there anyway to recover my photos or at least be able to see new ones I take from now on?

    Matencio:
    Welcome to the Apple Discussions. Are all of the photos that way or just some? If it's all then it's more than just messing with the library from the Finder that's at work here. If most of the photos are visible you can try following Tutorial #1 before creating a new library and importing the Originals folder from your current library.
    If all photos are affected then you're looking at starting from scratch with a new library as follows:
    Creating a new library while preserving the rolls from the original.
    Move the existing library folder to the desktop.
    Launch iPhoto and, when asked, select the option to create a new library.
    Drag the Originals folder from the desktop into the open iPhoto window.
    This will create a new library with the same rolls as the original library. However dates on the rolls may be different but can be edited as you would the roll title.
    In the future I recommend you make a backup copy of the Library6.iPhoto file after each import and after doing a lot of editing and organizing in the library. Then if you experience a similar crash all you need to do is replace the damaged database file with the backup copy and you'll be back to the same place in the library as when you make the backup.
    Once this is completed you can delete the Originals folder from the desktop and the iPhoto Llibrary folder. If desired, you can keep the older library folder to try other fixes on it.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Maybe you are looking for