Unable to view Public Folder Under Excel SpreadSheets in BO Explorer 3.1

Hi ,
I require to create Info Space using the data in an excel sheet. I am unable to configure the excel since the public folder is not present under the Excel Sheet option. Pls brief if this is got something to do with the version?
Thanks in advance!

Hi Priyank,
To find your audit reports:
https://service.sap.com/sap/support/notes/1389973
For more information on audit, have a look at this post which contains usefull information about audit
BOE XI R3 -- Auditing Parameters.
Regards,
Philippe

Similar Messages

  • Unable to expand public folder in Outlook 2013 and Exchange 2013 CU6

    Hello,
    we have just migrated Exchange 2010 to 2013. Everything works great, except public folders, which we are not able to expand in Outlook 2013. Public folders can be added to OWA without any problem, so just the Outlook 2013 is a problem (we never tried any
    other version, as all the e-mail clients installed here are Outlook 2013).
    The public folders are visible under node Favorities in Outlook 2013, but whenever we click any folder, the Public folders disappear completely from the left navigation pane or the message is shown on the right pane, that the public folder cannot be opened.
    When Outlook is started, a dialog is sometimes opened, which contains prefilled Microsoft exchange server, mailbox, button Check name, which is disabled. The only thing which can be done with that dialog is clicking the button Ok.
    Any help is appreciated, the desperation level starts to be reaching max threshold.
    Kind regards,
    John.

    Thank you for your quick response. I have tried removing and creating new Outlook profile many times, without any effect.
    1) When I switch to the online mode, only the node All Public Folders is displayed in the left navigation pane and after I start the Outlook the dialog mentioned above is displayed. The node Favourities is not visible.
    2) In offline node, node App Public folders is visible and whenever I click it, message "Cannot expand the folder" is shown. After checking Download favourities, the list of public folders is available, but whenever I click any folder, it shows
    "We didn't find anything to show here." and "The folder is up to date." in the bottom status bar. The content is rendered correctly in OWA and these public folders contain many e-mails and subfolders. None of these is rendered in Outlook.
    Thanks in advance for any tips and inspiration, we start to run out of ideas. I am more than sure that it will be something simple, but we can't still figure it out.

  • Info View Public Folder not displayed

    I have installed BO XI r2 and have configured two users in the CMC within a development environment with 35 named licenses. When i start Info View and log in as a new user the Public Folder is not displayed only Inbox and the Personal folder. Anybody know why the Public folders are not displayed. Permissions?
    I have not changed any settings for Admin or Everyone and setup the new user by adding them to an existing group with full control.

    It's a permissions issue most likely, you need to give the Group this users belong to minimum View rights on the Root folders.
    go to CMC>Folders>Rights

  • Unable to set Public Folder Permissions

    I have created a Public Folder Mailbox and Public Folder. When I go to set permissions via the EAC, the "User" field is grayed out...when I Browse for a user I can search and select a user, but that user is not carried over to the User field where
    you would set permissions.  I am unable to see ANYYONE with permissions via the EAC. However, when I access my Public Folders in Outlook 2013, I and a co-worker both have "Author" level permissions.
    I am an Administrator on the system and have added myself to the Public Folders role and anything else that looked even remotely related :-o
    Thanks for the help!
    -Nick 

    Hi,
    We can try settings the permission on the specific folders by using the exFolders tool:
    https://gallery.technet.microsoft.com/office/Exchange-2010-SP1-ExFolders-e6bfd405
    Thanks,
    Simon Wu
    TechNet Community Support

  • Unable to view a folder in InfoView

    Hi,
    A user is unable to see a folder in InfoView even though he is added to a Windows AD sub-group. The sub-group is nested to a parent Windows AD group and parent Windows AD group is added to this folder.
    Other members in the group are able to view the folder, but not this member. When I checked the u201CMember Ofu201D property for this member, the Parent Windows AD group is not seen.
    We are using Windows AD credentials for logon to InfoView and Business Objects XI 3.1 version.
    Have anyone came across similar issue.
    Thank you.

    Hi,
    Restart the CMS server once and test the issue again. Also refer the following SAP Notes:
    SAP Note - 1328995
    SAP Note - 1325901
    Regards,
    Nakul

  • Unable to delete a folder under Artists and albums...

    Hi..Im not able to delete a folder under Artists and albums in the music player. When deleting im getting msg as "File is Corrupted. Operation Cancelled". Can somebody suggest me how to get rid of the folder??

    Connect phone to computer with usb cable (select mass storage mode) and try to delete folders using computer's file manager.

  • Unable to remove public folder

    Hi i am doing transition of Exchange 2007 to Exchange 2013
    During Testing i could not remove public folder database in Exchange 2007 so i had to remove it from schema.
    CONFIGURATION -- CN=Microsoft Exchange,CN=Services,CN=MyOrganization,CN=AdministrativeGroup,
    CN=MyServer,CN=InformationStore,CN=PublicFolderStorate,CN=PublicFolderDatabase
    I have deleted the PublicFolderDatabase object. then it worked.
    I just need to cross check, is this right object in schema to be deleted

    Hi ,
    Yes the above mentioned path is right.But the above mentioned  path belongs to the configuration partition in AD not on schema partition.
    Thanks & Regards S.Nithyanandham

  • Unable to view /Developer Folder

    Hi All,
    I am using Macosx Lion. I dont know but after the updation of LION.  I cant view some folders like "developer" which contains all the development tools.
    Please tell m hoe to view the developer folder in macosx lion
    Thanking you,
    Bharath Ch

    The normal permissions are that the owner (root) and admin group can read & write, while everyone else has only read permissions.  There shouldn't be any other extended attributes or ACL entries.

  • Unable to view Report Filters on Excel Services web part

    I have an Excel 2010 file with Pivot Charts. I want users to be able to select filters for the pivot charts to modify their chart/report as needed.
    This excel file with Pivot Charts is visualized using Excel Services Web Part on SharePoint 2010.
    My problem: The Pivot Chart Filters do not appear on SharePoint. They are available when the file is opened in Excel 2010.
    Is there a way to have chart/report filters show up on SharePoint (excel services web part)?

    As per the article below it seems that Pivot Chart Filtering is not available with Excel services. The article reads
    "PivotChart reports are not interactive when displayed in a browser. You cannot filter a PivotChart report directly, but if you interact
    with the PivotTable report that supplies data for the PivotChart report, the PivotChart report updates accordingly. This means if you filter the PivotTable report, the PivotChart report updates to show the filtered data set."
    Unsupported Features in Excel Services
    Though this article is for MOSS 2007 but if you read the following article for SP 2010 it reads "All other unsupported features continue
    to behave as they do in Office SharePoint Server 2007 for Excel Services."
    http://msdn.microsoft.com/en-us/library/ff595319(v=office.14).aspx
    Amit

  • Unable to view windows folder

    hi sir,
    I am new to solaris ,i installed solaris 10 ,now i am facing one problem in accessing window's folders ,I can browse any machine but i am not able to see any folder of that machine It gives error message that u don't have permission to see that other machine has window 2000 and no one see my machine ,but they are able to ping my machine what is resion i dont know .
    pls help my all work held up now

    I am new to solaris ,i installed solaris 10
    solaris 10 ,now i am facing one problem in accessing
    window's folders ,I can browse any machine but i am
    not able to see any folder of that machine It gives
    error message that u don't have permission to see
    that other machine has window 2000 and no one see my
    machine ,but they are able to ping my machine what is
    resion i dont know .Solaris does not have the ability to browse Windows shares. You can use the 'smbclient' tool to access shares , but this is an ftp-like interface

  • Camera will not keep photos and unable to view this site under mobile

    Anyone else have a problem with the camera not keeping a picture.  It happens intermittently. 
    Secondly. How do I view the forums using mobile instead of full site? This stopped working with the new OS ver.
    Solved!
    Go to Solution.

    Hi KMucci
    Re: Viewing the site as Mobile. Have you checked your Browser Settings - Settings/Developer Tools/Desktop Mode?
    It may relate to the issue you're experiencing as the default is mobile, but you could look if you're unaware of the option.
    Disclaimer:
    I know a little about lots of things,
    yet not a great lot about those little-things.
    Ultimately, I'm here to learn.

  • Unable to view Imported DC from NWDI in the webdynpro explorer view

    Hello,
    I am facing problem with NWDS version 2.0.22. we are upgradeing EP04 SPS 14 to sps 22.  When I import a DC project from NWDI from inactive view of development configuration perspective I cannot see the created DC's in Webdynpro Explorer view of webdynpro perspective but it is showing in Navigator view.
    Also when I create Webdynpro Project or Webdynpro DC locally I was able to see it in Webdynpro Explorer view.
    Can any one please tell me why I was not able to view imported Webdynpro DC's that I create from Inactive view of Development Configurations perspective (selected DC in inactive view and right click and create project).
    Also when I compared the Folder structure in the Navigator view of Webdynpro perspective.   I found below folders structure differences.
    Imported DC from Inactive View of Development configurations
    Folders:
    cfg, def, gen, Model Folder (and sub-forders), src(and sub-forders), test.
    Files:
    .dcdef and .project
    Locally created DC (which is visible in the Webdynpro Explorer view)
    Folders:
    bin, cfg, def, gen, gen_ddic(and sub-forders), gen_wdp(and sub-forders), lib, META-INF, Model Folder, src(and sub-forders), test.
    Files:
    .classpath
    .dcdef
    .project.
    Thanks

    Hi Experts,
    I get below error when I create project.
    com.sap.tc.devconf.SyncException: Failed to sync DC "xx.com/xxdcnamexx(xx.com_xx_1)" in configuration "xx_D". File "C:\Documents and Settings\Administrator\.dtc\0\DCs\xx.com\dcname\_comp\.dcdef" does not exist locally after sync but it exists on the server
         at com.sap.tc.devconf.impl.DCProxy.syncSources(DCProxy.java:916)
         at com.sap.tc.devconf.impl.DCProxy.syncAsSources(DCProxy.java:744)
         at com.sap.tc.devconf.impl.DevelopmentConfiguration.syncAsSources(DevelopmentConfiguration.java:4964)
         at com.sap.tc.devconf.impl.DevelopmentComponentNode.syncAsSources(DevelopmentComponentNode.java:955)
         at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction$1.syncSelectedDCs(DcCreateProjectAction.java:443)
         at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction$1.execute(DcCreateProjectAction.java:237)
         at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:71)
         at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
         at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)

  • Viewing Vista Folder Containing Palm Stuff Crashes Window Explorer

    After I install the Palm software, it creates a directory in my Documents folder.  When I open the Documents folder, Windows Explorer crashes.  After I uninstall the Palm software, I have no further issues.  So, I tried to be clever and create a folder called Palm Stuff and installed the software in that folder.  This worked, excdept when I sync for the first time, it creates a new folder in the Documents folder for the synced info and I am back to where I was.  How can I change where that folder is created when I sync?
    Dave
    Post relates to: Centro (AT&T)

    There are registry entries that need to be deleted to completely remove Palm desktop. Here are the uninstall instructions.
    You should first make a copy of your data to have just in case something
    happens. You can find your data files by going to Start --> Documents -->
    Palm OS Desktop. Highlight your Palm Desktop username and right click and
    copy. Then go to your PC desktop right click on a blank spot and select paste.
    Now you want to uninstall Palm Desktop and remove everything that has to do
    with Palm Desktop from your computer.
    Go to the following locations on the PC and delete the folders listed below.
    C:\Program Files\Palm or Palm One
    C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
    PalmOne
    C:\Users\[Vista Login Name]\appdata
    *Note you may need to view hidden folders to get to appdata. To do that go
    into your control panel and open folder options. Go to view tab and uncheck
    hide hidden files.
    Once this is done you will need to delete some registry keys from your PC Operating System.
    Word of warning, going here and deleting the wrong thing can cause your PC
    from starting up, crashing and deletion of programs and data. If you feel
    you are unsure of yourself, see if you have a friend that can help you or a
    PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
    Go to start on the PC, in the search field type "regedit.exe" without quotes.
    Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
    Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
    The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
    If you make a mistake, stop what you are doing. And call a PC technician.
    BUT do not turn off your computer.
    The reg keys are as follows (Note: some of theses reg keys will not be here
    but if they are delete them)
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
    * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
    * HKEY_CURRENT_USER\Software\Palm
    * HKEY_CURRENT_USER\Software\Palm, Inc.
    * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
    * HKEY_CURRENT_USER\Software\palmOne
    * HKEY_CURRENT_USER\Software\PalmSource
    * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
    Next reboot your computer.
    Then reinstall your palm desktop from the CD and do a hotsync. When it asks for a username, use the name that is in the upper right corner of the hotsync application on your Centro.
    Post relates to: Palm i705

  • Outlook clients are connecting to different site public folder rather than same site public folder on exchange 2010

    Team,
    users are unable to expand public folder from outlook, but they are able to navigate through outlook web access.
    noticed the outlook connections are connected to other child domain PF server rather than local site public folder server.
    due to this issue, users are unable to navigate to pf's , by restarting RPC Client access service , now users are able to connect to local public folder servers.
    all the databases are pointed to local pf database. all the settings looks good.
    any suggestions would be appreciated.
    Regards
    Srinivasa K
    Srinivasa K

    Hi Srinivasa,
    How about OWA?
    If it works in OWA, it seems an issue on the Outlook client side.
    I suggest run Outlook under safe mode to avoid some AVs and add-ins.
    I also suggest make sure the Outlook client has the latest patch.
    Also try to re-install Outlook.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Can't access Public folder as guest

    Since installing Leopard computers on the network will not connect to my Public folder as guest.
    When trying to access the Public folder under 10.4 the "Guest" option is grayed out, although connecting as a user (entering user/pass) is possible.
    When trying under 10.5, once I select the computer name from the Finder's window left menu "Connection Failed" appears on the dark-grey bar at the top. Still, like in Tiger, connecting as a user is possible, but when trying to disconnect by pressing the "Disconnect" button on top nothing happens. I get the same "Connection Failed" message and the user remains logged.
    Where I may have messed up: I have 2 accounts in my computer (1 admin, 1 standard). I almost never use the admin account so I deleted it's Public folder from "Shared Folders" under Sharing in System Preferences. Then, on the standard account I deleted by mistake the "Staff" group from it's Public folder permissions. When trying to add "Staff" back, the option is not available.
    All of that may have nothing to do with my problem, but I know very little about Unix, so who knows.
    Any ideas as to why no one can access my Public folder as guest?

    That would be in the case I wanted a Guest Account on my same computer to be able to access my Public folder. My problem is with computers on the network. Thanx anyways

Maybe you are looking for