Unable top convert the status of idoc from 03 to 12
Hi experts,
I am working on idoc scenario on ECC6.0.I am pushing the idoc from R/3 system to PI7.0.I have done all the prerequisites involved to pushing idoc-----
maintain Rfc destinations,maintain port,partner profile,distribution model....
But when i am pushing the reduced idoc from sender it's showing the status 03.when i am running RBDMOIND in se38 still it is not getting converted into 12.
kindly help me how can I convert the status from 03 to 12.
Thanks in advance.
Regards,
Naresh.K
Hi Naresh
you have to create the service. Create first the technical system and the business system in the SLD. Look for the right "Logical System" (Transation SALE in R3).
In the Integration Builder Directory go to "Environment/Clear SLD Data" and create the service by "Objects/Service without party/Business System/Assign Business System".
Hope this will solve your Querry
Thanks !!
Questions are welcome here!!
<b>Also mark helpful answers by rewarding points </b>
Regards
Abhishek Agrahari
Similar Messages
-
How to change the status of IDOCS from 29 status to 53
Guys
how to change the status of IDOCS from 29 status to 53
Thanks in advanceHi Krishna
IDOC_STATUS_CONVERT Use this FM and reward me -
How to changes the status of IDOCs from 18 to 06....
Hi All,
I have set an Idoc to send the invoice to a midleware called Inovis via ALE, everything is looking OK at the moment and we are getting status 18. however for some reason Inovis needs the status 06, I have not idea how to set this change.
Thanks in advance
RegardsActually we asked Inovis Consultant to resolve this matter, apparently it was a problem with the message confirmation.
Regards
Alexis -
File-idoc Unable to convert the sender service to an ALE logical syste
Hi experts
iam working on file-idoc scenario ,iam getting the below error in sxmb_moni and RWB
"Unable to convert the sender service to an ALE logical system"
i checked the partnetr profile, RFC(sm59) and IDX1 t codes.
the connection is ok. but still i could figureout the problem.
please suggest me
Thanks
vasaviHi,
Have u checked the logical system is added in the Sender Business service in the Integration Directory?
Open the Buiness Service/System --> EDIT-ADAPTER SPECIFIC IDENTIFIERS
then specify the logical system name.
Go throgh the following link
Troubleshooting File-to-IDOC Scenario in XI.
Regards
Sridhar Goli -
Unable to convert the sender service PPG to an ALE logical system
Hello all,
maybe anybody can help or give me further information.
I have set up a scenario to send IDOC from a business system ( ERP ) to a business service ( EXT ).
Receiver is a linux system so I use the FTP-FILE adapter as communication channel.
The send-process is so far ok.
Here my tests:
1) exclude the specific IDOC in IDXNOALE table ( means no technical acknowledgment for this IDOC )
result :
a) message in SXMB_MONI: status-flag: processed, acknowledgment-flag: not in use
b) message in RWB-Monitor: Sender ERP --> Receiver EXT ok
2) But I would like to have a system status..... here now the problem
add specific IDOC into IDXNOALE table ( for request acknowledgments )
result:
a) message in SXMB_MONI: status-flag: processed, acknowledgment-flag: acknowledgment not possible
--> error message: unable to convert the sender service EXT to an ALE logical system
b) message in RWB-Monitor: there are now two message,
first: Sender ERP --> Receiver EXT = ok
second: Sender EXT ---> Receiver ERP = system error
Receiver-Interface is : http/ww.ahlstrom.com/EXT/ MI_IN
3) furhter tests:
a) change FTP apdapter channel ( put some wrong settings )
message in SXMB_MONI: status-flag: processed, acknowledgment-flag: contains system errors
message in RWB-Monitor 3 messages ( one ok, and two error messages )
b) changed only the receiver communication channel to HTTP ( other extisting scenario )
then the acknowledgment works fine wihout errors.
I'm wondering, but here Receiver-Interface is: http://sap.com/xi/xI/Message/30/Acknowledgment
Summary: The process works, but strange:
message in SXMB_MONI: unable to convert the sender service EXT to an ALE logical system
message in RWB: system error
No problems with HTTP adapter
Regards,
Reinhard DoekerHi,
Addition to the above said by Udo...
for routing the ack back to the sender system you need to create communication channel of type idoc with name as Ack.....
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe?quicklink=index&overridelayout=true
Check the above link section 3.2
HTH
Rajesh -
Unable to convert the service as an ALE logical system
nHi to All..
I'm facing a problem in one scenario IDOC to RNIF. I got this problem "Unable to convert the sender service to an ALE logical system. In that Interface is working properly but the thing is Acknowledgement is showing error and when I was triggring the IDOC from ECC at the time message Data Receiving successfully but coming to Acknowledgement Am getting ERROR. Any one can please do the needful for this.
Note:- Sender is Business system and Receiver is Business Service
Thanks and Regards
SrinivasHi srini
Receiver System is SEND the acknowledge to ECC here only we are facing the problem
help me uderstand correctly ...
your asyn interface is ECC(sender)-to- Bservice receiver .(works fine)
now Bservice (sends an ACK)- to -ECC (receiver) - do u have other asyn interface for this .. must be.
if not this means you are trying out sync scenario in which you are expecting the ack to go back to ECC syn (which i think not possible or u need to use BPM as the idoc interface will be always asyn).
try giving the LS name in the Bservice , not in the Bsystem as you mentioned.or
open your receiver agreement and select header mapping - Sender service
choose your PI's business system
Regards,
Srinivas -
Problem Unable to convert the sender service to an ALE logical system
Hi to All..
I'm facing a problem in one scenario File to Idoc .. I got this problem
"Unable to convert the sender service to an ALE logical system" in pipeline Call Adapter.
I check this blog but the problem persist . /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
Also I have another scenario in other Software Component Version SCW and the Idoc works correctly..
I wonder if I miss something
this the trace
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_IDX_IDOC_SERVICE-ENTER_PLSRV">
<Trace level="1" type="T">Pipeline Service ID: PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="T">Get Information from IS-Header Objekt</Trace>
<Trace level="1" type="T">Get Information from SD-IDoc-Endpoint</Trace>
<Trace level="1" type="T">Sender and Receiver after Header-Mapping</Trace>
<Trace level="1" type="T">Sender service Sys_XXX</Trace>
<Trace level="1" type="T">Receiver service Sys_EDV_XXX</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
Edited by: Luis Ortiz on Jan 25, 2010 3:37 PMHi,
in order to use only one logical system (PI's) in we20 in ECC and not as many as you have sender systems
Regards,
Michal Krawczyk -
Unable to convert the sender service to an ALE logical syst
Hi,
My scenario is IDOC to File.
SLD:Configured Correctly ,ABAP Business System.
Imported the same in ID,under Adapter specific Identifiers gava the Logical system as in WE20.
In the Receiver Agreement,Header mapping tried giving the sender service,Receiver service.
Still the Error "Unable to convert the sender service to an ALE logical syst" is seen in SMQ2.
The file is getting generated at receiver directory mentioned in the receive CC.
There is no error seen in SXMB_MONI.
Did any one had a problem as this.
Thanks,
SrinivasaHi,
You need to specify the Logical Name of Business System under Adapter specific identifiers for your Receiver Business System.
The specified item was not found.
Secondly you can use Header Mapping in Receiver Agreement. Or
If you are taking your control records from payload then tick the check box "Apply Control Records from Payload".
Regards, -
Error "Unable to convert the sender service to an ALE logical system"
Hi,
I send I message from XI to R3 and I get the error "Unable to convert the sender service to an ALE logical system" in transaction "sxmb_moni". I've configured the idoc-adapter, as following:
-I have created a business system "r3sys_bs" with a logical system "r3system". This business system is the idoc-adapter. This logical system is also created in transaction "bd54". In the ID I have assigned the business system the logical system (adapterspecific identification).
So, this error still appears.
Can anybody help me please?
Regards
StefanHi,
our scenario is JMS --> XI --> IDoc
so, I have created a business system "jms_bs" without a logical system in sld, that I use for the jms-connection to another software. so, the business system is a "third party".
Then I have created a business system with assigned logical system for the IDoc-Receiver as I in my first posting mentioned.
Which of both business systems need a logical system?
Thanks
Regards
Stefan -
Unable to convert the sender service insertgoods to an ALE logical system
Hi ,
I am trying to send an IDOC to sap system through XI BPM . But I am getting error as "Unable to convert the sender service insertgoods to an ALE logical system"
To rectify this error, I selected the integration process in integration directory and in (services---adapter specific properties I gave the logical system name as "LS" . Now i do not get any error in XI but idoc failed in SAP with error as "Partner profile not available "
Please advice .
Thanks & Regards,
SuvarnaHi Suvarna
I have done this type scenarios using A2A and BPM also. I got success.
Here what i mean to say , forget about your integration process for a while.
For example you are sending a vendor file from System1 to a SAP System (IDOC). Here that file send by sender should be converted into IDOC.
So during the configuration of SLD for Sender system ,we should give logical system (any name) for Business System.
That logical system should be created in SAP system in (SALE tcode).Then you can't get that <b>"Unable to convert the sender service"</b>error.
For integration process no need to assign any logical system , leave it blank.
If you have any doubt you please call me on my mobile or give me your mail id I will forward the document which i have done.
thanks
Prasad 9960226467 -
Unable to convert the sender service ACC_BSer_SEN_F2I to an ALE logical sys
IN a File to Idoc senario.... this the error am getting , wot may be the issue
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>ACC_BSer_SEN_F2I</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert the sender service ACC_BSer_SEN_F2I to an ALE logical system</SAP:Stack>Hi Kiran,
>> <i>But here the issue is, i did not get my IDoc created in R/3 side.</i>
What is the status of ur idoc in the R/3 system? Go to we02 or we05 and check the status of ur idoc that u have sent to idoc.
>><i>Do we need to send the data in the specific R/3 format?</i>
Yes.The R/3 will receive data in specific format either it may be via idocs,RFC's or proxies.
>><i>Inbound Message ( CENTRAL ) - Green flag
Response - Black success flag.</i>
It tells that the msg in moni is successfully.
Regards,
Prasanthi. -
Error: Unable to convert the sender service SC_PO_fileidoc to an ALE logica
Hi,
I'm currently creating an Idoc adapter receiver with BPM. However I've received an error at the second stage from BPM - IDOC. It gives the error "Unable to convert the sender service SC_PO_fileidoc to an ALE logical system". Appreciate if anybody can help me.
Cheers
ZubairHi,
This weblog will help you resolve this issue.
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
under the section "Intgeration Process as the receiver system"
Check whether you have assigned the Logical system (LS) name to the integration process in the adapter specific identifiers (Integration Directory). Also check whether an entry for the LS is available in the SLD for the sender Business system.
Regards,
Sridhar -
Unable to convert the sender service CSBK_Invoice02 to an ALE logical syste
Hi Experts,
I have Idoc -> BPM -> Third party system scenario.
In which while getting acknowledgement i m getting the following error.
"Unable to convert the sender service CSBK_Invoice02 to an ALE logical system"
here CSBK_Invoice02 is my BPM.
I have checked the Adepter specific config into the ID.
For R/3 it is correct, and for Third party system it is blank.
As here BPM is giving error. But i am not able to give any Logical system there.
Any idea y this error is coming?
Its really very urgent, as my development is going into production tomorrow.
Please help me out in this ASAP.
Thanks in advance.
Regards,
HetalHi Hetal,
Did you check the response from Mickael from thread..
1/ In your Business Process of your ID (configurator), go to menu "Service > Adapter-specific identifier" and in the part "IDoc Adapter", write your Logical System.
2/ Create this Logical System on your target system (R/3).
WARNING: XI allows you to used a Logical System for only one service (Business Process). Thus, if you are several interfaces, you must used different Logical Systems.
Hope this will help.
Nilesh -
When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It was working great for the first week that I used it, but now it doesn't give me the converting option. I am very frustrated as I have done nothing to change anything, and I was thinking this was so great...now I am just pulling out my hair and do not have the option of calling anyone since no phone numbers are listed. I am VERY busy and do not have time to sit and wait over a half an hour to "chat", which I tried to do yesterday. All I want to do is very simply, convert pdfs to Word. I have paid for this and am not getting any help. I am not very savvy when it comes to Adobe this program and Adobe that program...I feel I am being scammed as I do not get simple answers for something that appeared was going to be simple. You can't even call customer service to talk to someone live to help walk you through.
Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha -
Unable to convert the sender service to an ALE logical system
Hello,
file adapter > XI 3.0 > Idoc adapter > r/3 system
In sxmb_moni I receive "Unable to convert the sender service to an ALE logical system".
In we05 in r/3 system no Idocs are arrving. I have no problem with idoc > XI > idoc scenario to this same r/3 system (using same sld business system)
I read other topics on this error but it seems they all talk about an IDOC outbound interface.
What should I check?
Thanks
BoazI do have the same problem as Boaz Paz
When I try :
file adapter > XI 3.0 > Idoc adapter > r/3 system
> This is a B2B scenario where "AVTItalia" is the external party trying to send via its "AwayOrders" business service (a file pickup) an idoc to business system "UPG" (non party service)
I get an error while XI tries to call its IDoc Adapter:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>AwayOrders</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service AwayOrders to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
With the following trace logs :
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external = AVTItalie</Trace>
<Trace level="1" type="T">Sender party normalized = AVTItalie</Trace>
I ve tried to (cf. /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc ):
1. add a logical system name "ACYAVTFBC1" in "Adapter specifier Id" of "AwayOrders"
In the runtime cache > services an entry appears for " ... Logical System | AVTItalia | ACYAVTFBC1...".
2. declare "AVTItalia" as a business partner in SLD with the logical system name
Plz help!
Maybe you are looking for
-
Having "upgraded" to Mavericks, I'm totally dissatisfied with it. Several things are missing that were useful on the old OSX that I had before, e.g, in Mail, there is no indication that mail is being downloaded. Also, my version of Dreamweaver won't
-
Stock Transfer Order - Post freight cost in diff. G/L of the material cost
Hi Friends, I created PO (stock transfer Plant to plant). In condition I added standard price and Freight cost. When I received material in receiving plant the freight cost was added in total stock valuation of receiving plant. In Plant to Plant tran
-
CD Text on burned cd's using iTunes
As far as i know there is no way that you can put cd test on a regular audio disk using itunes to burn it. but i was wondering if any knew of a way. I would like to get cd text on my cd's because my cd players has to capability. so if if any one know
-
Forgotten password and have not connected with itunes
I have not synced with iTunes and have forgotten password plz help?!It is an iPod touch 5th generation and not sure what operating system it is haven't updated it since last release
-
About FMLA Leave in ESS Time sheet
Hi Sap gurus, Our Client has requirement to implement FMLA where employee can enter vacation along with FMLA . How we can configre this in Time Evaluation to allow two absences on the same day. This is allowed in ESS Working Time Record Working Time