Under Delivery Tolerance and Scrap

Dear Experts,
I have a business that would like the under deliver tolerance on their production orders to include scrap quantities.  The business uses production orders in more of a make to stock type of environment.  The example is below.  Any idea if it is possible to get the under delivery tolerance to include scrap quantities?
Example:
Production order is for 100 total and scrap is for 10 pieces.  Under delivery tolerance is 15%.  In the current system the production order will not set to status closed / delivered until there is 85 pieces of good production reported.  The business would like the order to get status closed / delivered if 85 pieces of good or scrap are reported.  
Thanks,
Matthew Bruckner

Hi,
A little confused with your example;
Production order is for 100 total and scrap is for 10 pieces. Under delivery tolerance is 15%.
In the current system the production order will not set to status closed / delivered until there is 85
pieces of good production reported. The business would like the order to get status closed / delivered
if 85 pieces of good or scrap are reported.
The example states an order will get delivered status when 85 pieces are delivered and then in the last line it also states business wants the status to be delivered if 85 is delivered, is this a typo? If not can you please clarify a little more on the need?
Regards,
Vivek

Similar Messages

  • Over and Under Delivery Tolerance Defaults

    Hi !
    Is there a way to provide a default Over and Under Delivery Tolerance % at Company Code or Purchising Org level?
    If yes, please let me know what the menu path is to make that setting.
    Our tolerance for Over delivery is 10% standard across the board and we would rather not have to enter it separately in every Purchasing Info Record.
    I understand that I could use Purch Val Keys, but we are trying to avoid that as well.
    Appreciate the help!
    Thanks,
    Anisha.

    Hi anisha,
    Try using this way.
    SPRO-MM-PURCHASING--PURCHASE ORDER--SET TOLERANCE LIMITS FOR PRICE VARIANCE
    Here u can finalize the upper and lower limits as 5%. the PO shall automatically pick up the same.
    Using Purchase value keys is preferred in u r case.
    SPRO- MM - PURCHASING - MATERIAL MASTER - DEFINE PURCHASING VALUE KEYS - NEW ENTRIES Define a purchasing value key which has over and under delivery tolerance as 10% in GR/IR controls
    and assign this purchasing value key in the material master to which you want to allow 10% variation.
    Hope this helps.
    Regards,
    Nani.

  • Authorization for PO fields of over delivery and under delivery tolerance

    Hi,Any one know how to set authorization for PO fields of over delivery and under delivery tolerance?
    For example to allow certain user to edit the these fields but other users will be only display mode.

    Better create variant for restricting fields over & under delivery tolerance for certain users than applying authorization.

  • Pulling Over/Under delivery Tolerances from Customer Master into CMIR

    Is it possible to pull the over/under delivery tolerance values from the customer master info the CMIR?  I don't understand why the delivery priority flows from the cusotmer master to the CMIR but the Over/Under Tolerances do not.  I've looked at SAPMV10A ... it looks like I might be able to use an enhancement spot to add the necessary logic but I've not used this type of user exit and I'm not sure if there is a better solution (like some configuration that I'm missing ???)  Any advice would be appreciated.  Thanks!

    Hi Mallisa,
    I tried creating a CMIR record and both Delivery Priority and Over/Under Delivery tolerance were copied in CMIR record from Customer Master.
    BR,
    Anshul Chohan

  • How to default Over&under delivery tolerances into Replishement delivery ??

    Hi
    How to default the Over delivery and under delivery tolerances in to the replishement delivery created against the STO which has those tolerance values ??
    And i should be able to do Goods receipt(GR) with over delivery quantity within the limits against the replishement delivery(I do not want to do GR against STO)
    Thanks
    Maruthi Ram

    Hi Jurgen,
    Thanks for the link you provided.
    But can't we control the overdelivery tolerance just like the under delivery for a specific combination of plants in the STO configuration.
    Cheers
    Maruthi.
    Edited by: MARUTHI RAM on Mar 18, 2009 7:37 PM

  • Over or Under Delivery Tolerance

    Dear All,
    In customer master shipping tab page I have define Under and Over delivery tolerance by 0.5 each, and in delivery item category configure setting B which said "Situation rejected with an error message".
    When I create a scheduling agreement for lets say a month and start to create delivery with first time after enter the VL01N transaction system give me the red message of Under and Over Delivery tolerance.
    Can any one tell me the reason. so far I cant change the delivery quantity even delivery page is not appear, message appear before that.
    Regards.

    Dear All,
    Agreed, but there what is the solution, I want to delivered each schedule line each day, were user should not change the quantity.
    I mark blank in the customer master for shipping as you gurus said.
    Regards,

  • OVER DELIVERY / UNDER DELIVERY TOLERANCE IN CONTRACT GOA

    Hi All
    We do have this field in header as well as item in GOA
    Under/Overdelivery Tolerance
    HEADER
    (1) Under/Overdelivery Tolerance - not available in ECC Purchasing contract - help me to find if you could.
    what is the spl significace this field at header level
    ITEM
    ( 2) Under delivery is ALWAYS UPDATED in ECC but it never updated Overdelivery Tolerance in Purchasing contract .
    will update in Contratc to Over delivery in purchasing contract too ?
    why it is not available in header level table entry this info. i could see onlt itm level table in bbp_pd..
    Muthu

    HI guys
    any help is appreciated..
    I am sure SAP has 10000 meanings for one field ...They will not keep just like that...some useful meaning is there..
    i wanted to know this mapping field from GOA to ECC.
    muthuDocument Tolerances for GR
    VALUE OVERRUN
    OVERRUN QTY IN CURRENCY AM
    AMOUNT BLANKET PURCHASE OR
    TIME OVERRUN BLANKET PO
    OVERRUN QTY IN CRCY AMT (P
    PRICE DEVIATION
    PRICE VARIANCE (PO)
    TIME OVERRUN (PO)
    TAXES (INV)
    CF-Document Tolerances for GR
    DA
    DQ
    LA
    LD
    PM
    PP
    PR
    PZ
    TX
    BBP_TOL_GRP

  • Over/under delivery tolerance

    I want to maintain under and overdelivery tolerance of Rs 10/- for purchase invoice.
    Means vendor billamount can vary by +- 10/-
    How will I maintain it in custmizing?
    Pl guide
    Regards
    VS

    Hi,
    The tolerances that neslon mentions are merely for GR tolerances and not invoice tolerances.
    I would check out the vendor specific tolerances SPRO - MM > Logistics invoixce verification > Incoming invoice > Configure vendor specific tolerances.
    You allocate a Tolerance group to the vendor master record and you configure tolerances here that are specific to that group only.
    Read the configuration help text, it does explain the process quite well.
    Steve B

  • Uder delivery and over delivery tolerance....for matl

    Hi,
    Is it possible to maintain uder and over delivery tolerance for matl. If yes then please explain how?
    I will award for each points.
    regards,
    Imran Shek

    Hi,
    At Material master level:
    1. Maintain under delivery / over delivery tolerance in percentage in Material master Work scheduling view. U can use the indicator Unlimited instead of Over delivery tolerance if needed. (Indicator that specifies whether the quantity actually delivered may infinitely exceed the required production order quantity)
    At production order level:
    2 . Maintain Under delivery / Over delivery tolerance in percentage in Production Order Goods receipts tab for Finished/semi finished material.
    Customization settings to get warning message:
    In customization, OPK4(Parameters for Order confirmation), for the plant and order type, maintain Warning when Quantity falls below Under delivery tolerance and Warning when Over delivery tolerance is Exceeded.
    By these settings you can able to give over delivery quantity and System prompts you whether this quantity is within the specified delivery tolerance or not with Warning message.
    But If Delivery tolerance is varying from order to order it is suggestible to have the same settings at order level.
    Hope this clears all your doubts.
    Regards
    Venkat

  • Can Over Delivery tolerance edited in PO creation

    All SAP Gurus,
    When we create PO, the values in the field under delivery tolerance and over delivery tolerance are copied (adopted) from purchasing info records.
    Is it possible to manually edit those values in PO?
    Regards,

    Yes we can edit the Tolerance limits.In your case are you facing any problem?

  • STO under del.  and over delivery tolerance limit

    Hello friends
    Can anyone tell me the all settings for limiting STO for over delivery and under delivery. Its working fine for normal order (OR) and delivery but iam not able to apply on STO.
    Please help
    Regards
    Inder

    hi
    follow the menu path u can mention over and under delivery tolerance for STO
    IMG
    |
    |
    MATERIALS MANAGEMENT
    |
    |
    PURCHASING
    |
    |
    PURCHASE ORDER
    |
    |
    SET UP STOCK TRANSPORT ODER
    |
    |
    ASSIGN DOCUMENT TYPE,ONE STEP PROCEDURE, UNDER DELIVERY TOLERANCE
    REGARDS

  • Over delivery and under delivery tolarance limit.

    Hi all,
    I want to configure the over delivery and under delivery tolerance limit
    fix i.e. 5%.
    Any user can give tolerance up to 5% and not more than that.
    Please help me
    Regards,
    anant

    Hi,
    U can configure the same . Please refer
    SPRO-MM-PURCHASING--PURCHASE ORDER--SET TOLERANCE LIMITS FOR PRICE VARIANCE
    Here u can finalise the upper and lower limits as 5%. the PO shall automatically pick up the same.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful.

  • PO Delivery Tolerance affect on PO Value

    Dear Guru,
    Suppose there is a PO release for 10 items and of value 10,000. Alongwith +30% over delivery tolerence is also assign. Now PO release is working on 10K, where as system is allowing acceptance of 13K material value for GR. My concern is how to consider over/under delivery tolerance value for PO release.
    Pl. suggest,
    Rgds,
    Cs

    I dont think this is possible throught standard config. May be you can add one field in Purchase ORder using BADI ME_PROCESS_PO_CUS  and update this with PO value + overdelivery tolerance.
    Do enhancement in Release Strategy by appending  same field( as added above)  in CEKKO   and also use exit EXIT_SAPLEBND_002  for Changes to Communication Structure for Release of Purchasing ( that is CEKKO).
    Regards
    Sangeeta

  • Report for Purchasing Documents with Over Delivery or Under Delivery Tolera

    Dear All !
    please suggest me a report for Purchasing Documents with Over Delivery or Under Delivery Tolerance limit.
    thanks n regards
    Naagsekhar

    hi,
    Go to ME2N --> Use dynamic selection, choose for hte Puchase doc item --> here select for the over and under delivery and then execute the report..
    Hope it helps..
    Regards
    Priyanka.P

  • Error in MIGO with over delivery tolerance

    Hi Team,
    In material master using purchasing value key we have set 10% over & under delivery tolerance limit.i have created a PO with 10 qty and when i try to increase the qty to 11 in MIGO i am getting the error message "PO ordered qty exceed by 1",can anyone help me to resolve the error.
    Thanks

    HI
    It seems you maintained/changed purchasing value key after creating the PO.
    If this is the case then new tolerance values will not flow to PO and you will face problem during MIGO.
    Update the PO to new tolerance levels manually.
    Also change the inforecord of the material wrt new tolerance levels.

Maybe you are looking for

  • Diferimento Parcial do ICMS PR  (processo de compras)

    Boa Tarde a todos, gostaría tirar uma dúvida com voces e validar se o processo que estou fazendo esta certo. Meu cliente tem planta em Parana, portanto tenho algumas Notas Fiscais onde acontece o seguinte casso; Total da nota; 2260 Base de calculo: 2

  • Creation of Billing Plan data

    Hi all, I am using [BAPI_SALESORDER_CREATEFROMDAT2] for creating Sales order and i also have billing plans data to be updated in the sales order. But i dont find any structures for populating the Billing plan data into the BAPI.   But i found the SD_

  • Error message during recovery reformatting hp mini 110-3030nr

    ordered the recovery usb for my hp mini 110-3030nr trying to format but when its trys to write recovery files I get this error message. copy file fails From: D:\preload\base.wim  To: C:\RM\Image\base.wim   Please help product number WQ809UA#ABA

  • Digit in part number disapears on wrap - help...

    Here is what happens: I type this part number into a new text box, FRDM6881-C100. Then I make the text block smaller, positioning the right side of the text block so that it falls over the "C100" in the part number. The text wraps at FRDM- but on the

  • Issue editing template for website

    So, I am new to Dreamweaver and constantly baffled about finding solutions to problems on my own. My issue is this. I have been assigned the duty of updating and modifying our company's webpage. I had nothing to do with the creation of this page, so