Unexpected change in moving average price

Hello All,
As per my understanding, the material moving average price will only be changed when there are any new receiving with different material price. However, the situation for this material average price is not as what I expected, it has unexpectedly rise for two days and then again became normal.
I have checked and found that only 261 movement was carried out.
I have also checked in invoice, but nothing is wrong in that.
Kindly guide me on the same.
Regards,
Joginder

Hi Joginder,
The MAP is recalculated at every relevant movement & invoice. Please
review the following notes which explain how the MAP is calculated and
what can change the MAP.
518485  FAQ: Valuation of goods movements
518368  FAQ: Valuation for the purchase order
209864  Moving average price is disproportionately large
185961  Moving Average Price Calculation
Regards,
Kevin

Similar Messages

  • Changes to moving average price

    Dear All,
    I need to have a report showing Changes to moving average price for multiple material masters. Please suggest me if there is any standard way of getting it. Or from some tables i can take values.
    Regards
    MSR

    Hi,
    I think there is no std report to find out the MAP of the material.But however you can find the map using MBEW table for that material at that instance. Also you may try to use MDEWH to know the MAP for any period (like previous periods).The downlosd may give you some picture about MAP changes.
    Regards,

  • How change the moving average prices?If run costing done In the MR21 system

    hI,
    How change the moving average prices?If run costing done In the MR21 system notallowing the changing the prices?
    Regards
    Channa

    Hi
    Showingerror
    A current or future standard price exists for material 300000007
    Message no. CKPRCH025
    Diagnosis
    A current or future cost estimate exists.
    Procedure
    You can set the price of a marked cost estimate through the radio button 'Default Planned Prices' and release it by saving.
    Please what is the process changing moving aveerage prices

  • -ve price change in Moving average Price of Material in Material Master.

    Dear All,
    Kindly guide on below issue.
    We have a Material e.g A which stock was available in System let us say 10 qty & the Price per unit was Rs.10. But in last August some users chagned the price to Rs.5 because of whcih the Valuation in previous period has become negative.
    Now I have to rectify this. Now please tell me how can I do so.
    Also Note: there are sevral other Movements have happened since then i.e. GR, IR, Consumption for Production etc.
    This is very important.
    Regards,

    For negative MAP , there are steps which are given in SAP note 356757. Follow this steps to overcome this issue.
    The notes goes as...
    Summary
    Symptom
    When you try to post an invoice for the purchase order, the system generates error message M8783: 'Moving average price for material & & & is negative'.
    Additional key words
    MRHR, MR1M, MIRO, MMVAL, M8783
    Cause and prerequisites
    You posted a valuated goods receipt for a purchasing document for a material with moving average price control.When the invoice was posted (invoice item with price variance for goods receipt), the system generates error message M8783: 'Moving average price for material & & & is negative'.
    Between the posting of the original goods receipt and the entry of the invoice, the system already posted additional valuation-relevant transactions/events (goods movements, invoices and so on, can be displayed with Transaction MR51).
    The invoice verification tries (for stock coverage) to credit/subsequently debit the difference between the value of goods received and invoice item value for the stock.However, the material total value must not become negative by this stock posting.
    Solution
    Before you post the invoice, you must first increase the stock value.
    The amount by which the stock value must be increased at least can be calculated from the following values:
    1. Transaction MM03, accounting view material master, field 'Total value' (MBEW-SALK3)
    2. Invoice item value according to invoice
    3. In the invoice verification (Transaction MR01, MR1M, MIRO), change the invoice item amount to a value which is high enough and simulate the invoice to receive the value which would be posted for this item to the GR/IR account.
    In the invoice verification, the value (3) minus (2) is posted to stock. It must be larger than (1).Post a subsequent debit with the amount (3) + (1) - (2) for the affected material/plant (Transaction MR22).
    You can post the invoice afterwards.

  • Track Changes in Moving Average Price

    Dear Experts ,
    I have a material , the MAP for which has changed drastically from Rs 10 to Rs 123 over a month
    I need to check the changes in MAP of the same .
    How an this be done ? Is there a std report for the same ?
    Regards
    Anis

    Hello Lakshmi Reddy ,
    MBEW & MBEWH gives the price of the material in a certain period .
    But in our case , within the same period the price has drastically changed .
    The reasons for this were erroneous price in PO .
    Also at the same time there were instances where the price was changed at the time of invoice verification .
    Also there was a manual price change done using MR21 for the same material .
    All the above are scattered documents , that have affected the material price .
    I want to know if there is any way  by which we can find out the various price changes taken place for a particular material .
    Regards
    Anis

  • Change in Moving average Price

    Hi Experts,
                  When ever MAP changes in our SAP syst . I need to trigger the changed value into non-SAP syst.   I know MAP will not be registered in change logs.  
             I am looking for MAP changes based on Date / Matnr.  Any ray of light on this would be highly appreciated.
    Thanks in advance.
    Ravish..

    Michael,
                   Thanks for response .  I activated the change pointers .  I created a new message type Z.. 
    assigned MATMAS04 to this Z type . In BD52 i added VERPR field for tracing changes . I activated my Z type in BD50.  I saved .  Still it is not loging change logs
    either in BDPS/ BDPV tables  or in CDHDR .
    Pls give me hints if i am missing any thing in between.

  • Change Moveing average price in MIGO Goods Reciept through user exit

    Hi,
    i need to change the moving average price in the MIGO transaction  (Goods Issue) through user exit can any one help me with user exit.

    Hi,
    Check these Enhancemnts...
    Exit Name           Description
    V02V0001            Sales area determination for stock transport order
    V02V0002            User exit for storage location determination
    V02V0003            User exit for gate + matl staging area determination (headr)
    V02V0004            User Exit for Staging Area Determination (Item)
    V50PSTAT            Delivery: Item Status Calculation
    V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
    V50R0001            Collective processing for delivery creation
    V50R0002            Collective processing for delivery creation
    V50R0004            Calculation of Stock for POs for Shipping Due Date List
    V50S0001            User Exits for Delivery Processing
    V53C0001            Rough workload calculation in time per item
    V53C0002            W&S: RWE enhancement - shipping material type/time slot
    V53W0001            User exits for creating picking waves
    VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
    Badi Name            Description
    DELIVERY_ADDR_SAP    Determine Time-Dependent Delivery Address in Delivery
    DELIVERY_PUBLISH     Returns BAdI Implementation: Automatic GR Posting T 2
    DELIVERY_PUBLISH     Updating of Delivery in Purchase Order
    DELIVERY_PUBLISH     AIP: Delivery Confirmation for Sales Order
    Regards
    Raghu

  • Moving average price variance in Invoice verification

    Hello,
    I set in sys that the moving average of price variance will be check in tolerance of x% (lower & upper limit) BUT the system ignore it , when I save an Invoice (MIRO) with price that change the moving average price for more than X% the invoice was saved with no W/E massage . I set all massages that seams to be relevant with E but nothing was happened .
    What is the way to set the system that in Invoice verification stage it will check the moving average price variance and give an alert or will not let the invoice to be post ???
    Best Regards
    Idit

    Hi,
    You can block Invoices using transaction code OMC0
    (a) Use Tolerancy Key VP for your company code
    (b) Fill-up Lower and Upper check tolerance limit %
    When a stock posting line is created as a result of an invoice item, the system calculates the new moving average price that results from the posting. It compares the percentage variance of the new moving average price to the old price using the percentage tolerance limits defined.
    Bye,
    Muralidhara

  • Automatic MAP ( Moving average Price) in CDHDR - How to capture?

    Hi All,
    I have a requirement in which changes to Moving Average price ( MAP) needs to be send to another legacy system through custom MATMAS IDOC. Now when I make a change to MAP through MR21 or MM02 these changes are written in BDCP table and a change pointers are created and hence i am able to send them through IDOC. But when for a material the MAP changes through GR,GI Oor PO changes in such cases the MAP change being an automatic change it doesn't get captured in CDHDR and CDPOS table and hence no change pointers are created. I know CDDHR and CDPOS captures manual changes and not automatic changes. Could anyone please explain me in details how this problem can be resolved.
    Thanks ,
    Ameesha

    Hello,
    I doubt a GR,GI or PO can change the Moving Average Price.
    It should be only through MR21.
    Please check again.
    Rajeev

  • Making Moving average price a mandatory field in MM01

    Hello,
    I've tried to make MBEW-VERPR a mandatory field in TC MM01, but with no success.
    I tried using field selection (OMSR), screen variant (SHD0), making system message M3 131 an Error - nothing worked.
    Please advice.
    Thanks,
    Dikla

    Dear Lakshman,
    You are right in what you are saying, and to explain the reason why I'm trying to make this field mandatory, I'll describe a scenario:
    You have a Make To Order purchased material and you received an order for this material from one of your customers. You go out to purchase this material.
    When you do GR for this PO, the PO price does not change the moving average price (MAP) of this material - it changes the sales order MAP of this material.
    If, for some reason, the customer cancels his order at this point, you will do transfer posting to this material and change it from sales order stock to own stock.
    We do this transfer posting with movement type 414 and that movement does not change the MAP of the material.
    Now we have stock for this material, but with MAP zero.
    If now we receive another customer order, we don't have to go out for purchase because we have this material in stock.
    If we will use MvT 413 to allocate the stock to the sales order,
    it will be allocated with price zero.
    In this case, when we'll post the outbound delivery, no financial document will be created because the price of the material was zero.
    I want to prevent this situation.
    If the field is mandatory, even a price of 0.01 will be enough for the creation of financial document when I post a material document.
    Dikla

  • Moving average price date wise

    Hi,
    Is there any table to track date wise changes of moving average price?
    Regards,
    Sattuj

    hi
    u cant get it date wise but check following table MBEW
    and field  VERPR Moving Average Price/Periodic Unit Price
    http://sap.niraj.tripod.com/id43.html
    for the material prise change documents use table MLHD wiith field BELNR
    regards
    kunal

  • Moving average price changed drastically

    Hi Experts,
    i having one problem,
    i having material of ' A '  1392.5 Kg having moving average price of 6.52 $ per kg (as of  02.03.2009 ),
    i issued goods to order on 17.03.2009 with movement type 261 of 233.60 Kg for 646.74 $
    here new moving average which systems shows for material 'A' is 2.77
    please explain why system shows new moving aveage price as 2.77, also why is not considering old values to calculate MAP(stock already present )
    Also please explain what could be the possible reason for this error.
    Thanks & Regards
    Prashanth.

    follow this discussion, I think it has all you need to get your problem solved
    moving average price changed drastically

  • How to change moving average price with movement type 501

    Hi Gurus,
                         Our client procures stock item with P-Card and use the movement type 501 to receive into the stock. The value of these items are updated with the moving average price, most of the time the current purchase price is different than current moving average price, so client wants to change the moving average at the time of receiving the goods into the system. Can some one explain is it possible or not. If possible how can we adjust the price? Client doesnu2019t want to go modify the price with other transaction. They want to modify while receiving with MIGO.
    Thanks,
    Vikram

    Hi
    You need to goto transaction OMJJ, select the movement type as 501.
    Then double click on "Field selection-Enjoy transaction".
    Add the field EXWBR & make it optional.
    Now when you goto MIGO & enter 501 movement type you will find the Ext amount in LC field on Quantity tab page.
    Enter the amount in this field during the GR.
    Regards
    Prasad

  • Changing of Inventory Valuation:  Standard to Moving Average Price

    I work at a service-based company and have also been asked to research the impact involved with switching our inventory from standard price to moving average price. 
    Scenario:  Change material type TRAD (trading goods) from standard price to MAP.
    Process:  Change settings in SPRO at the level of u201CDefine Attributes of Material Typesu201D.  Currently, this is set for u201CStandard priceu201D with the indicator u201CPrice ctrl mandatoryu201D set.  Upon change to u201CMoving average price/periodic unit priceu201D, Iu2019m thinking I need to de-activate the u201CPrice ctrl mandatoryu201D field so any current materials with an u201CSu201D in the Price control field on the Material Master Accounting 1 tab can be changed to u201CVu201D.  Is this correct?  Also, is there a program that already exists to mass update the Price control field on the Material Master?  If not, I was looking to create a CATT for this changeu2026.any other ideas?  In some of the forum posts it was mentioned to use t-code MR21 however, even with the u201CPrice ctrl mandatoryu201D field de-activated, the Price control column is grayed out.
    It was mentioned in a previous post that all open documents (PO to IR) need to be completed before changing the price control setting, at what point does this stop the process?  Does SAP generate a system error message?
    Also, any suggestions as to when this price switch is best to take place like after inventory?
    Are the above mentioned areas the only areas I should be concerned about or am I missing some areas that should be addressed?
    P.S. We do not use have our ML (material ledger) activated or use split valuation.
    Thanks~
    Dawn

    Hi,
    If you want to change material from standard to moving average price, Follow the below process
    1)first the material quantity and value should be zero
    2)if you want to keep value and quantity and want to change price control in future you have to create new material with price control "V' and lock the previous material for posting.
    Regards,
    Sreekanth

  • To find user exit whever moving average price changed

    Hi Experts,
    I need to write my code whenever moving average price (MBEW-VERPR) get changed, few scenarios are:
    - MBEW-VERPR can be updated from MR21 transaction
    - Create Purchase Order then create delivery then transfer order, on confirmation of transfer order MBEW-VERPR can be changed
    - It can be changed from MIGO transaction on Goods Receipt and Reversal.
    -It can be changed from VL09 transaction on reversal of goods.
    My requirement is to make my code as transaction independent, so I need to find out user exit( or enhancement spots) to write my code to update a z-table.
    Can anyone help me to find out the correct place to write code?
    Regards,
    Piyush Yadav

    Changing average price also creates an accounting document, whatever the origin of the change. So you could try BTE 00001025 of Publish&Subs (P/S). From BKPF header information you should be able to find the original documents (marterial receipt, average price change, etc.)
    Regards,
    Raymond

Maybe you are looking for

  • How do I delete applications?

    Hi everyone, I know this is probably the stupidest question you've ever heard, but how do I delete the applications on my Tour that I didn't download? I don't use AIM, Yahoo! Messenger, or anything like that, and I can't figure out how to delete them

  • Bug in 2.5.13 Java XmlValue.getAttributes()

    There seems to be some issue with properly deleting the XmlResults from XmlValue.getAttributes() using the Java api. Here is a sample function to illustrate the issue: private static void runAQuery(XmlManager manager, String query) {                

  • LDOM SUN Cluster Interconnect failure

    I am making a test SUN-Cluster on Solaris 10 in LDOM 1.3. in my environment, i have T5120, i have setup two guest OS with some configurations, setup sun cluster software, when executed, scinstall, it failed. node 2 come up, but node 1 throws followin

  • How do i find my screen name to set up eprint

    I have a 6500A - trying to set up eprint?

  • KNA1 is a header level data or item level data ?

    How should we treat KNA1 ? As a header data table or Item Data table ?