Unicode conversion problem after MaxDb upgrade

Hi to all.
I upgraded a SapDb instance of a SAP ContentServer from 7.3.0.35 Non Unicode to MaxDB 7.7.0.38.
After that, I saw that the _UNICODE parameter is set to YES.
I installed the new Odbc driver of MAxDB 7.7 accordingly to note 698915, but the dll extracted is only the unicode: sqlod32w.dll and not the sqlod32.dll.
The command
odbcreg LiveCache -i -p c:\sapdb\<DBNAME>\db\pgm
doesn't found the dll, so I copied sqlod32w.dll to sqlod32.dll and that command goes well (?!?).
After that, when from Content Server I try to extract some data, I found, in the CS_trace of Content Server, this error message:
X-ErrorDescription: "FetchDoc ContentStorage, SQLExecute [SAP AG][SDBODBC DLL][MaxDB] General error;-8046 POS(1) Conversion from UNICODE impossible: 6530 ;ODBC State S1000; Error Code -8046"
Any suggestions?
Thanks
Franco

Hi Franco,
what is the name of the file you downloaded from SWDC? I downloaded the package MAXDB7606_20-20000534.SAR and MAXDBART7606_20-20000534.SAR and both did contain a SDBODBC.TGZ package which in turn did contain an ASCII driver sqlod32.lib.
Did you check this TGZ for the ASCII driver?
Regards,
Steffen

Similar Messages

MDMP Unicode Conversion problem during ECC upgrade

hi Experts,
I met a problem when upgrade from 4.6c to ecc 6.
in 4.6c, some key users made some chinese written entries in table field while he/she was logon as English, so, the language field in this entry is "EN" although the actual language was written by chinese, after upgrade to ECC6, we found the chinese words became messy code, maybe it was due to the chinese were encoded by english codepage during conversion, my question is, how can I avoid this? I really don't want this happen in our PRD upgrade.
The second question is: if a field contains both chinese and english, then, which language should it be assigned? english or chinese? I'm afraid if we assign this word as "EN" in vocabulary, then, after upgrade, the chinese part will be messy code.
Thank you for your kind suggestions.
Freshman

Hi,
you can either use transaction SUMG (manually) to repair the entries ( you have to add the according table - please check unicode conversion guide for details) or you need to change the language key in the table to Chinese if you want the Unicode conversion to convert the data correctly.
To your second question: If the English texts are restricted to US7ASCII characters ("normal" English without special characters) those texts containing Chinese and English words can (and must !) be assigned to ZH, as US7ASCII characters are included in the Chinese code page.
Best regards,
Nilsn Buerckel

Unicode conversion phase after ECC6 Upgrade

Hello guros,
We have successfuly completed the upgrade from ECC5 to ECC6 EHP4.
Part of our full upgrade plan is to also convert the system to a unicode compliant system.
I assume something went wrong during the DB export , because now many entries that are supposed to be in hebrew in our database tables appear like gibberish (Its a trial system - dont worry).
What I find weird about these occurances is that within such a table, some lines appear fine and even some rows appear fine in hebrew , whereas others dont.
Let's take the system user table for example:
(USER, NAME , SURNAME, ADDRESS).
USER1 | שלום | עליכם | יקרים |
USER2 | %%$% | אלי | #$$%#$ |
USER3| #$%#$% | $##%$#%| $#%#$$%%#
Unresolved symbols represnt gibberish.
Is there something that we might have missed?
Thanks in advance, Udi.

> Let's take the system user table for example:
> (USER, NAME , SURNAME, ADDRESS).
>
> USER1 | שלום | עליכם | יקרים |
> USER2 | %%$% | אלי | #$$%#$ |
> USER3| #$%#$% | $##%$#%| $#%#$$%%#
I would say that those entries were not correctly specified in your vocabulary as being Hebrew - OR
Addresses have another speciality, they have a "creation language" field (LANGU_CREA). That field may be wrong filled if you e. g. create the user with an english logon and then change the user data to Hebrew (with Hebrew characters). The entry in the LANGU_CREA field however stays english. If you use that field now to decide the conversion of the addresse it will be converted wrong and you see gibberish.
Markus

DataSource problems after BW upgrade

DataSource problems after BW upgrade
Upgrade from
SAP NetWeaver 2004s: SAP_BW 700 0012 SAPKW70012
to
SAP EHP 1 for SAP NetWeaver 7.0: SAP_BW 701 0007 SAPKW70107
BW system: PI_BASIS 7.01 SP 6
ECC/source system: PI_BASIS 2005_1_700 SP 11
Problem exists throughout, both with generic and standard DataSources.
Here is one specific example:
Generic DataSource ZXXXXXXXX
InfoPackage "ZXXXXXXXX(ZXXXXXXXX)" does not run. Error:
DataSource ZXXXXXXXX(SOURCESYS) must be activated
Message no. RSDS179
Then followed these steps:
1. Replicate Metadata from source system
2. Report RSDS_DATASOURCE_ACTIVATE_ALL from SE38 for source system SOURCESYS and DataSource ZXXXXXXXX
Errors returned:
Inconsistent user object ZXXXXXXXX SOURCESYS for PSA /BIC/B000XXXX
Error saving DataSource ZXXXXXXXX SOURCESYS
DataSource ZXXXXXXXX (SOURCESYS) could not be activated
When I try to choose "Manage" from the context menu for the DataSource, I see an error:
Invalid DataStore object name /BIC/B000XXXX: Reason: No valid entry in table RSTS
Message no. RSM1294
The following notes have not helped:
https://service.sap.com/sap/support/notes/1377274
https://service.sap.com/sap/support/notes/1383711
https://service.sap.com/sap/support/notes/1489064
https://service.sap.com/sap/support/notes/1056060
And no other SDN threads seem to give fruitful suggestions.
Any ideas?

Hi,
Just to help the folks out here.
In my case,
Inspite of going through several valid NOTES & program, my issue didnt resolve (you reply was pretty accurate - but dint help me :-)).
I have resolved the issue by adjusting the PSA table for the same.
Procedure:
Take the psa name --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
Just in case anyone who come across this problem, can do the above steps.
Regards,
Dubbu.

I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
It might be something in your backup.

I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable DVD/USB stick to install using this free program.
Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
Mavericks is supposed to be released this fall, so you may want to wait.

Unicode Conversion Problems~

Dear Expert:
I tried to import SAP_BASIS 700_15 to Ecc6 after an upgrade ECC 6.0.
(The Unicode Conversion Guide told me to do some step but need to import the Basis package to 18)
but an error occured return code 8.
check the SAP note 822379 and it said:
SAPKB70011 - SAPKB70016
Symptom: After you import the Support Packages SAPKB70011, SAPKB70012, SAPKB70013, SAPKB70014, SAPKB70015, and SAPKB70016, syntax errors occur in the class CL_GUI_ALV_GRID because corrections from notes have been partially overwritten. This may cause important Basis functions (such as the background systems) to no longer work.
Solution: Before you import the specified Basis Support Packages, see the information in Note 1249184.
after I refer to the note and upload and implement the 1174095 as it said,and import the SAP_BASIS 700_15 again but the error still occured like below.
   R3TRFUGRSPOO was repaired in this system
   R3TRFUGRSPOO was repaired in this system
   R3TRCLASCL_GUI_ALV_GRID was repaired in this system
what should i do ?
Regards
Jack lee

Dear Expert:
after doing what you said.
a error occured as below:
Runtime Errors         SYNTAX_ERROR
Date and Time          03.09.2009 14:43:21
Short text
     Syntax error in program "SAPLKKBL ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_GUI_ALV_GRID===============CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLKKBL " in include "LKKBLF01
      " in
     line 238:
     "Activation ID "ALV_PRINT_PARAMS" is unknown."
thank you for your help~
Regards
Jack Lee

Hard disk problems after full upgrade [SOLVED]

After a full upgrage (pacman -Suy) last monday, My system denied to boot:D:D:D:D:D.
So to fix it I have to go to /boot/grub/menu.list and change from hda3 to sda3. Everything seems to be Ok but when the system is booting and scan the the hard disk to check bad, It drops me to the shell with the error that there is something wrong with my hard disk and it suggest me to set the superblock to 8139.
So to fix it I boot my PC from Arch live CD, use the following command:
#fsck.ext3 -c -f /dev/sda3
#fsck.ext3 -b 8139
Everything seems to be Ok, there is no bad in my hard disk.
When I boot my system again, I got the same error again, I came back to live CD, check the hard disk, set the superblock as It told me and again, I got the error when I boot from the hard disk.
This is the second PC with the same error.
Three months ago, I upgraded my Server and got exactly the same problem. Because this is the server, I need it run ASAP, so I modified the rc.sysinit script so that the system will not check my hard disk when It boots. :P:P. And my Server can run without any problems since then.
I don't have time much to spend on this error and my PC is in the Lab now so I can't provide the detail of the error until next Monday. Sorry for that.
Any idea how to fix this error?
Cheers.
Last edited by hungsonbk (2008-06-25 10:26:35)

tigrmesh wrote:Did you review and merge any .pacnew files after the upgrade?
:D:D I am a kind of lazy guy so when I did pacman -Suy, I just leave it running without reading information on the terminal.
milan wrote:I guess you didn't change entries in /etc/fstab (hda->sda).
Yes, you are right. I changed from hda to sda in /boot/grub/menu.lst but I forgot to do the same in /etc/fstab files. On Monday I will check again if it is set correctly or not
:D:D. I have just taken a quick look into the fstab file in my Server, The One with the same problem three months ago, and the fstab file is set correctly with sda partitions. I don't want to touch this server again or my services will be down. So this seems not the correct solution, but anyway, I will take a look at it next week.
Thanks for your replies.

External monitor problem after Lion upgrade

Hi,
I have a 20" iMac which has a screen resolution of 1680x1050(ATI Radeon HD 2600 Pro 256 MB). I have been using an additional 168x1050 monitor(Dell 2009W) in dual screen mode. This was working fine with Leopard, Snow Leopard, but it does not work after I upgraded to Lion. The screen appears to look fine for a few seconds then blanks out for a second and repeats. The only way I can use my extra monitor is by reducing the resolution to 1360x768.
Does anyone know of a fix or if apple is working on a fix. I called apple support, but all of their suggestion (fix disk permisions, reset PRam) did not help.
Thanks for any help.
Paul

Similar problem here with a 15" MacBook Pro purchased in late 2009. Connected to a new Dell ST2210 21.5" display via a DVI cable and Apple's mini display port to single link dvi adapter. The cable is dual link but seems to work fine the majority of the time.
When I wake my mac from sleep 1 time out of 3 I see black and white static on my external screen that only goes away when I unplug the screen or power it up and down.
I've tested another older MacBook Pro with the screen and everything works fine and when I connect with a different dvi cable I get the same issue.
When I called Apple support, they said it was a software issue and directed me to remove some .plist files in my library. I did what they said on the phone and it seemed to work for maybe 6 sleep cycles but the issue came back again. Since then I've reset the VRAM following their directions in a support article on the subject of external display static. (http://support.apple.com/kb/TS2377)
Does anyone know of a way to fix this or if Apple is actually listening? VGA works fine but I hate the quality of VGA compared to DVI. Should I look into getting an mini display port to dvi adapter from someone other than Apple?
It's annoying to have purchased a perfectly Mac compatible monitor which you really need, just to discover that Apple is having trouble with their mini display port...
Here's another guy with a similar issue and the same monitor (http://en.community.dell.com/support-forums/peripherals/f/3529/t/19330464.aspx#1 9691738). However, from the research I've done, his conclusion about it being the monitor seems to be false, especially with all the complaints here about similar issues regardless of display model.
I need an answer that does not include going back to VGA. What are your suggestions? I do have HDMI but would rather not shell out the money for a cable and adapter...

E52 Font Problem after software upgrade

Hello!
I have a little problem after upgrading my Noki E52 with the newest software version. All fonts are large, even if i set them to be small in display settings. So, my question is if there is a solution of this problem?
Thanks in advance!

i afraid to upgrade.. so many problems with new update.. hmm...
i don't have any idea but gl to find solve!

[NEARLY SOLVED] font rendering in gtk apps problem after last upgrade

Im' using KDE, cairo-lcd, libxft-lcd... my fonts looked beautifully, but now they look horrible...
After last upgrade my gtk apps (firefox, thunderbird) render fonts in an ugly way...
I've tried to revert to pango 1.16.5 with no lucky result (the same problem)...
here is the log:
[2007-08-19 14:56] upgraded bind (9.4.1_P1-2 -> 9.4.1_P1-3)
[2007-08-19 14:56] upgraded glib2 (2.14.0-2 -> 2.14.0-3)
[2007-08-19 14:56] upgraded gnupg2 (2.0.5-1 -> 2.0.6-1)
[2007-08-19 14:57] upgraded gtk2 (2.10.14-2 -> 2.10.14-3)
[2007-08-19 14:57] upgraded kernel26ck (2.6.22.2.ck1-1 -> 2.6.22.3.ck1-1)
[2007-08-19 14:57] upgraded libdownload (1.1-1 -> 1.1-2)
[2007-08-19 14:57] upgraded libevent (1.3b-1 -> 1.3d-1)
[2007-08-19 14:57] upgraded libxtst (1.0.2-1 -> 1.0.3-1)
[2007-08-19 14:57] upgraded nvidia-ck (100.14.11-2 -> 100.14.11-3)
[2007-08-19 14:57] upgraded sip (4.6-1 -> 4.7-1)
[2007-08-19 14:57] upgraded pyqt (3.17.2-1 -> 3.17.3-1)
[2007-08-19 14:57] upgraded xf86-input-joystick (1.2.2-1 -> 1.2.3-1)
[2007-08-19 14:57] upgraded xorg-server-utils (1.0.4-1 -> 1.0.4-2)
[2007-08-19 14:57] upgraded xorg-utils (1.0.2-2 -> 1.0.2-4)
[2007-08-19 14:57] upgraded xorg-xdm (1.1.5-1 -> 1.1.6-1)
[2007-08-19 14:57] upgraded xterm (225-1 -> 229-1)
[2007-08-21 00:16] upgraded cpio (2.8-1 -> 2.9-1)
[2007-08-21 00:16] upgraded ed (0.5-3 -> 0.8-1)
[2007-08-21 00:16] upgraded initscripts (2007.08-1 -> 2007.08-2)
[2007-08-21 00:16] upgraded intltool (0.36.0-1 -> 0.36.1-1)
[2007-08-21 00:16] upgraded libarchive (2.2.5-1 -> 2.2.6-1)
[2007-08-21 00:16] upgraded man-pages (2.60-1 -> 2.64-1)
[2007-08-21 00:16] upgraded pciutils (2.2.4-2 -> 2.2.6-1)
[2007-08-21 00:16] upgraded readline (5.2-2 -> 5.2-3)
[2007-08-22 00:16] upgraded gdbm (1.8.3-3 -> 1.8.3-4)
[2007-08-22 00:17] upgraded kernel26 (2.6.22.3-1 -> 2.6.22.4-2)
[2007-08-22 00:17] upgraded lcms (1.16-1 -> 1.17-1)
[2007-08-22 00:17] upgraded libice (1.0.2-1 -> 1.0.4-1)
[2007-08-22 00:17] upgraded libxrender (0.9.2-1 -> 0.9.3-1)
[2007-08-22 00:17] upgraded procinfo (18-3 -> 19-1)
[2007-08-22 00:17] upgraded xorg-apps (1.0.2-4 -> 1.0.3-1)
[2007-08-22 23:49] upgraded kernel26 (2.6.22.4-2 -> 2.6.22.4-2.1)
[2007-08-22 23:49] upgraded librsvg (2.18.0-1 -> 2.18.1-1)
[2007-08-22 23:49] upgraded libxpm (3.5.6-1 -> 3.5.7-1)
[2007-08-22 23:49] upgraded libxaw (1.0.3-1 -> 1.0.4-1)
[2007-08-22 23:49] upgraded makedev (3.8.3-1 -> 3.23-1)
[2007-08-22 23:49] upgraded mcpp (2.6-1 -> 2.6.4-1)
[2007-08-22 23:49] upgraded naim (0.11.8.2.1-1 -> 0.11.8.3.1-1)
[2007-08-22 23:49] upgraded nfs-utils (1.0.12-2 -> 1.0.12-3)
[2007-08-22 23:49] upgraded pam (0.81-4 -> 0.99.8.1-3.1)
[2007-08-22 23:49] upgraded pango (1.16.5-1 -> 1.18.0-1)
[2007-08-22 23:49] upgraded sox (13.0.0-1 -> 13.0.0-2)
[2007-08-22 23:49] upgraded xorg-apps (1.0.3-1 -> 1.0.3-2)
[2007-08-22 23:49] upgraded xtrans (1.0.3-1 -> 1.0.4-1)
[2007-08-25 15:25] upgraded glibc (2.6.1-1 -> 2.6.1-2)
[2007-08-25 15:25] upgraded bftpd (1.9-1 -> 2.0-1)
[2007-08-25 15:25] upgraded gcc (4.2.1-3 -> 4.2.1-3.1)
[2007-08-25 15:25] upgraded gtk-doc (1.8-2 -> 1.8-3)
[2007-08-25 15:25] upgraded hal-info (0.20070618-1 -> 0.20070725-1)
[2007-08-25 15:25] upgraded perl-xml-simple (2.16-2 -> 2.18-1)
[2007-08-25 15:25] upgraded icon-naming-utils (0.8.2-2 -> 0.8.5-1)
[2007-08-25 15:26] upgraded kernel26 (2.6.22.4-2.1 -> 2.6.22.5-1)
[2007-08-25 15:27] upgraded kernel26ck (2.6.22.3.ck1-1 -> 2.6.22.5.ck1-1)
[2007-08-25 15:27] upgraded libgnomeprint (2.18.0-1 -> 2.18.1-1)
[2007-08-25 22:41] removed libgnomeprintui (2.18.0-1)
[2007-08-25 22:41] removed libgnomeprint (2.18.1-1)
i dunno what happened...
plz, someone help me
regards
Last edited by saneone (2007-08-30 18:11:32)

Bogart wrote:
I think the spacing now is correct, while before it was wrong. The only "problem" is that you got used to a bad font rendering, and now that it has changed for better you feel like it's different and don't like it.
Really, *most* of the problems that people find in Linux's fonts are just because they are used to the awful default fonts from Windows XP. Yes, people can even get used to those fonts and believe they're good!!! And when they see correct fonts in Linux they think they're bad...
What I would do is remove the MS TTF fonts. They work bad in Windows and worse in Linux. You should use Bitstream Vera or DejaVu if you want good quality fonts (especially in web pages).
But, then again, you might think that they look wrong just because you're not used to it... Oh, well...
What does correct font / correct spacing mean ?
IMO, that doesn't make any sense, because that's a totally subjective matter, like many other things in this world.
BTW, I love how fonts look in Windows, and I think that must be the only thing MS got right. Thus, I'm using ms fonts in linux, and a rendering as close as possible (no autohinting or antialiasing or subpixel rendering).
Similarly, I could find a woman beautiful that you would find ugly or just average. We are all different, and it's better that way

Unicode Conversion necessary before 2004s upgrade??

Hello,
Can anyone tell me if it is necessary to do an Unicode Conversion first before upgrading a BW system to BW 2004s?
The Portal we are going to use is unicode enabled.
So this raises the question: "Do we need an Unicode Conversion first?".
Regards,
Jos

Hello,
It's not necessary to do a unicode conversion for NW 2004s BI. We still support non-unicode systems for NW 2004s BI. This link explains the pro's and con's of staying on non-unicode for SAP NetWeaver BI.
http://service.sap.com/~sapidb/011000358700006750052002E
Regards,
Bryan

Smart Playlist problems after iTunes upgrade 10.6.1.7

Hi, I updated my version of iTunes to 10.6.1.7 and since then my smart playlists are not syncing to my iPhone properly. The selection of songs is scrambled, and so I have a variety of my top rated, audiobooks and other random songs. I have tried removing and resyncing the smart playlists to my iphone, but this has the same outcome. Also, the sync doesn't complete all stages so I end up with roughly half of my music from my smart playlist on my iPhone.
Not sure if this is an iTunes problem or iPhone problem, but it definitely only started after I upgraded iTunes.
Any others out there with the same issue or any suggestions?

Yepper.. got the same issue.. it is not sync'ing my Itunes play lists to my I pod touch.

Odd Problems After Leopard Upgrade

I upgraded to Leopard a couple of weeks ago. All seemed fine until I began to notice a few odd things.....
1. Disk Permissions - If I select 'Verify/Repair Permissions' the disk utility began with the blue hatched bar and just stayed like that. I upgraded to 10.5.1 and now it progresses to the solid blue progress bar and says 'one minute remaining' but it makes no further progress. Same happens if I select 'Verify Disk'
2. No volume icon in the menu bar. It was there after the upgrade to 10.5 but yesterday I pressed the 'mute' button and the volume icon disappeared - it's been missing ever since and now I'v no volume.
3. MS Office 2002. I can see MS Office files - I can even preview them, but if I attempt to open them nothing happens. If I attempt to open the relevant MS app the icon just bounces once in the dock and then nothing.
It's worth noting that there are two users on my PB (both have admin status) but problem 3 only occurs in my user profile.
The other user is my wife and she's not the sort to mess with the computer - she just uses it.
can anyone shed any light on this as I'm seriously (and reluctantly) considering downgrading to Tiger.
Thanks in advance,
Seán.

Yo dude!
I think it's time to boot from the start-up dvd, run disk utility repair (always before an upgrade!), re-install (keep previous install just in case), restart, run all updates. Maybe if you have old software, it's time to un-install them and re-stall one by one until something untoward happens. I've been using Leopard on three macs without hitches.. I find it very stable. Current version is 10.5.2, quite soon since last update, so they're (apple) obviously fixing a few things. The only problem I had after upgrading to Leopard was some apps wouldn't hide (command-H) even from the menu, but sorted that by re-installing them after the leopard upgrade,.... hunky dory now.
Don't panic, there is always something silly causing bad **** to happen, 95% of the time it's software..
See you on Wednesday dude...... I'll bring up those disks I borrowed from you.....
dezzzzzzzzzz

8330 - Problem after OS upgrade

Hi All -
I recently upgraded the OS on the unit to V 4.5.0.175. A back up was created prior to the upgrade. After the upgrade, the note pad, task list and brickbreaker were deleted. They are not on the desktop or 'hidden' on the unit. In addition, the unit now makes a chirping sound when on a phone call. The Verizon has unable to help solve the problems. I have tried to download the updgrade to the desktop software from the verizon link in the hopes the missing apps would be included but have been unsuccessful. The download freezes at various points whether I am running it or trying to save it and is the only site/download I am having trouble with.
Any insights or suggestions to resolve these problems would be greatly appreciated. I would be happy to reverse the upgrade of the OS if that would solve the problems but do not know what the original version, where to get it or the best way to do it.
HELP - I need access to the info in the memo pad!!!
Thanks!!

Here's a thread about this issue:
http://community.vzw.com/t5/BlackBerry-Devices/High-pitched-sound-beep-while-on-calls-on-BB-Curve-8330/m-p/168979#M13338
StreetDoc found a solution....and if you PM him I'm sure he'll be more than happy to help you out.

Unicode conversion problem after MaxDb upgrade

Similar Messages

Maybe you are looking for