Unicode conversion with MDMP, Errors in various TC´s SAINT , SNOTE,
Hallo All,
We perform CU&UC of R/3 4.6C sandbox system to the ERP 6.0 EHP5.
Currently the upgrade phase is completed and Unicode conversion should
be started (we are in the step "Additional Preparation Steps in NW 7.02
non-UC" in the CU&UC guide).
In various transactions (PFCG - Generating of profiles, SPAM/SAINT ) we
received an error "SAP characters 00367 and 00065 are not unique in
character set 1180". As a workaround we temporarily deleted Polish
language (PL) in program RSCPINST and activated (so only codepage 1100
was active). Currently we have activated the Polish language again.
In the source 4.6C system TMB (created by System Copy from productive
system PMB) there was also the configuration in RSCPINST of more than 1
codepage (1100, 1401) and in TCPDB table 1180 codepage was configured
(see attached pictures).
Our question :
How is it possible to avoid this situation in upgrades of following
system (IMB, QMB, PMB)? Could this configuration cause any
problems/inconsistencies during/after Unicode conversion export &
import ?
Regards Peter Gauer
Hello Nils,
After upgrade, before unicode conversion we got the following error message in PFCG, SAINT,..
"SAP characters 00367 and 00065 are not unique in character set 1180"
I got the information from T-Systems that they excluded polish languages out of RSCINST,
then codepage 1100 was used, than T-Systems added polish language again to have the original situation.
First message I got with the simulation (choose blank latin-1)
The required language combination is supported
only in Unicode systems
Please refer to SAP Note 73606.
Now I Choose: 4EU, EuropTranslit
and simulation showed no message above, but went to the next page.
see below
S e l e c t e d S e t t i n g s :
Language(s):
EN (E) English
FR (F) French
DE (D) German
PL (L) Polish
ES (S) Spanish
Country code:
4EU EuropTranslit
R e s u l t s :
Code page configuration type:
Non-Unicode - Single Code Page configuration
Processed language entry:
DEFLS
Language(s) and Corresponding Code Page(s):
EN (E) 1180 Transliteration from Latin-2 (...) to Latin-1
FR (F) 1180 Transliteration from Latin-2 (...) to Latin-1
DE (D) 1180 Transliteration from Latin-2 (...) to Latin-1
PL (L) 1180 Transliteration from Latin-2 (...) to Latin-1
ES (S) 1180 Transliteration from Latin-2 (...) to Latin-1
T a s k s :
Required OS locales and their current status:
Locale installed = the locale is installed correctly
Set locale failed = the locale needs to be corrected on the app server
citmb07_TMB_07 de_DE.ISO-8859-1 Locale installed
en_US.ISO-8859-1 Locale installed
fr_FR.ISO-8859-1 Locale installed
de_DE.ISO-8859-1 Locale installed
es_ES.ISO-8859-1 Locale installed
Required profile parameter modifications:
RSCPINST does NOT change the value of profile parameter.
Please check the value of below parameter(s) after activation.
1) Please update zcsa/installed_languages.
e.g. Copy the new value and paste it into a field in transaction RZ10
New: DEFLS
Current (sorted):
citmb07_TMB_07 DEFLS
2) Please proceed with Check result for below parameter(s):
OK Checked and no inconsistency found.
Regards Peter
Similar Messages
-
Error with PS text after Unicode conversion
Hi, we are having problem after doing unicode conversion with special
character not displayed correctly in a Web interface. In SAP
(transaction CN04) everything is OK, but if the PS text is displayed
through a Web interface (BSP for instance) some characters are
displayed wrong. One of these characters is the apostrophe in French
language ('). Is there an available tool to perform a conversion of
existing PS text after performing unicode upgrade ?Hima ... try this
http://<server>/Lighthammer/JCOProxy?Mode=Reset -
Combined upgrade and Unicode conversion for ECC5 MDMP system
Hello,
We are planning to do Upgrade and Unicode conversion of ECC5 MDMP system to ECC6 EHP4 Unicode. We are adopting Combined upgrade and Unicode conversion strategy to minimise the downtime.
In source version ECC5 we are in support pack level 6. Should we need to update the support pack to any target version to start with CU&UC or we can start with ECC5 with SP 6 itself.
Since we cant afford more downtime for support pack update also, is it ok to start with upgrade and unicode conversion with current version.
please advice.
Regards
VinayHello Vinay,
please note that as a prerequisite the Basis SP should be accurate for an MDMP conversion.
There is no MUST to have the latest Basis SP, but without you could have severe issues in SPUMG.
On the application side, there are in most cases no hard requirements on the SP level.
Best regards,
Nils Buerckel
SAP AG -
Unicode conversion and patching simultaneously
Hi All -
We are planning to convert our core ECC 6.0 system to Unicode this year as well as patch it to the latest support pack stack. In order to minimize regression testing time, we are going to do them both at the same time so the functional teams only have to test once.
The question is which order to perform the tasks in: convert to Unicode first, THEN patch, or patch, THEN convert? I'm not sure the order matters, but I can't find any definite documentation either way. Has anyone had any experience with this that they would be willing to share?
Thanks for your help!
AbbyHi Abby,
this depends on what you mean by "patches" ?
Do you want to combine the Unicode conversion with applying support packages only ?
Or do you want to implement EhPs as well ?
If you go for EhPs, I would recommend to do this before the Unicode conversion. This is also the "normal" approach when combining an upgrade with a Unicode conversion.
In case of support packages only, both ways are possible (Unicode first and then SPs or vice versa) ...
By the way I assume you do not have an MDMP system - this would add some additional constraints ...
Best regards,
Nils Buerckel
SAP AG -
Support package requierement for unicode conversion
We are currently planning a unicode conversion for a SAP 4.7enterprise 1.1 extension version, running under Aix and Oracle, Basis/ABAP SP 35, HR SP20.
According to the conversion guide, we must implement at least Support Pachage 60 for Abap and Basis, no explicit requierement for HR SP level.
I believed that we must applied SAP procedure and exclusively HR Support Package Stack up to 27, which include SP 60 for Basis and Abap and HR 61.
Our HR guys argue there is no indication from SAP that the SUPPORT PACKAGE STACK policy is mandatory and that SAP will provide us with normal support if we run the unicode conversion with SP Basis/ABAP 60, in other word even if we do not respect the support package stack combinaison. Need help on this issue before starting the projectExterprise 4.7 is Unicode-Compliant,meaning that you can have unicode in 4.7.
If that the case, you should convert to 4.7 Enterprise Ext 2.00 Unicode First.
later only upgrade to ECC 6.0 after 2 years, as you said.
My answer is yes, to your question.
You can download the installation kits at:
http://service.sap.com/swdc
anyway, it is recommended to have the latest SP in your system.
cheers,
Vincent -
Unicode Conversion ERP6.0 EHP3
Hello
We have for Dev. purpose an ERP6.0 EHP3 SP2 Non-Unicode System, now we should make an Unicode conversion with this system. Does someone have an Idea for me which Conversion Guide I have to use for this ? NW70-14 ?? NW7016 ?? NW701 ?? there must be an NW703 or not ??
thanks,
StefanHi Stefan,
the Unicode conversion guides depend on the Basis/NW support packages / EhPs of your system.
If you have e.g. NW 7.0 EhP 1, then you need the guide 701.
The application support packages / EhPs are not relevant for the UC conversion (since it can be used for ERP,CRM,SCM, ...).
Best regards,
Nils Buerckel
SAP AG
Edited by: Nils Buerckel on Aug 25, 2010 2:46 PM -
Error while database export in package SAPDODS_33 (Unicode conversion)
Hello,
I am performing Unicode conversion on an upgraded BI 7.0 system. This is running on AIX/DB2.
When I take database export for conversion, one package fails (SAPDODS_33) with error "The file system is full". In fact, df -k doesn't show that any file system is full.
I am taking the export to the following location: /db2/BWS/sapdata/EXPORT_DIR
There are 3 system-managed temporary tablespaces: PSAPTEMP, PSATEMP16 & SYSTOOLSTMPSPACE which were residing in /db2/BWS/saptemp1/NODE0000. This was getting full during the export. Now these temp.tablespaces have been relocated to a new file system of size 15GB.
But still the package SAPDODS_33 doesn't get exported. Could you please let me know how to solve this issue?
Thanks a lot!
Sundar.
=====================================================================================
SAPDODS_33.log
(DB) INFO: connected to DB
(rscpsumg) Please look also into "SAPDODS_33012.xml".
(rscpMC) Warn: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(rscpMC) Warn: UMGCONTAINER has 1 problems.
(rscpMC) Warn: Global fallback code page = 1160
(rscpMC) Warn: Common character set is not 7-bit-ASCII
(rscpMC) Warn: Collision resolution method is 'fine'
(rscpMC) Warn: R3trans code pages = Normal
(rscpMC) Warn: EXPORT TO ... code pages = Normal
(rscpMC) Warn: Source is 'MDMP'
(rscpMC) Warn: I18N_NAMETAB_NORM_ALLOW = 0
(rscpMC) Warn: I18N_NAMETAB_NORM_LOG = 0
(rscpMC) Warn: I18N_NAMETAB_ALT_ALLOW = 0
(rscpMC) Warn: I18N_NAMETAB_ALT_LOG = 0
(rscpMC) Warn: I18N_NAMETAB_OLD_ALLOW = 0
(rscpMC) Warn: I18N_NAMETAB_OLD_LOG = 0
(GSI) INFO: dbname = "BWS
(GSI) INFO: vname = "DB6 "
(GSI) INFO: hostname = "UNKNOWN
(GSI) INFO: sysname = "AIX"
(GSI) INFO: nodename = "itmlartdev01x"
(GSI) INFO: release = "3"
(GSI) INFO: version = "5"
(GSI) INFO: machine = "002417CA4C00"
(GSI) INFO: instno = "0020169337"
(EXP) ERROR: DbSlExeRead failed
rc = 99, table "/BIC/B0000786000"
(SQL error -968)
error message returned by DbSl:
SQL0968C The file system is full. SQLSTATE=57011
(DB) INFO: disconnected from DB
/usr/sap/BWS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BWS/SYS/exe/run/R3load: END OF LOG: 20071211053119
p/sapinst/sapinst_instdir/NW04S/LM/COPY/DB6/EXP/CENTRAL/AS-ABAP/EXP #Hi Sundar,
if the problem is due to a high temp space usage. The root cause is typically the
sort during export. If the table is large, the sort spills to temp.
You can avoid the sort by doing an unsorted export or tweak the DB2 optimizer to use the primary key to do the sort.
Before DB2 9, you can reduce the OVERHEAD tablespace parameter to zero. Return this value to its previous value after the successful export. This is a indirect hint to the optimizer that random IOs are cheap. This might not help.
With DB2 9, this should not happen, because the DB2_OPT_MAX_TEMP_SIZE=10240 registry variable is set under DB2_WORKLOAD=SAP which limits the temp space usage to 10GB if possible. You can reduce this parameter further if necessary. Another problem could be that the optimizer has chosen the wrong temp space. The optimizer choses the temp space with the largest amount of pages (not size).
Regards, Jens -
MDMP unicode conversion - Vocabulary maintenace
Hello,
W have upgraded 4.5B MDMP system to ECC4 EHP4 and now we are in process of unicode conversion.
please advice on as specified below.
In SPUMG Scan process, we have completed the following scans:
a) Tables without language Info
b) Tables with Ambiguous language Info
c) Indx Analysis
For maintaining vocabulary we have implemented notes 756534 & 756535, 871541. and Tables with language are also scanned. While handling vocabulary the system has displays 539158 with duplicates and 189314 when duplicates are discarded, which doesnot assigened any languages. We have 9 acive languages.
As per Unicode conversion document i left out with only 2 more option a) HInt management b) Manual assignment
How to handle this? is this a normal situation or any correction can be done?
Thanks and Regards
VinayHi Vinay,
This Thread belongs to the Unicode forum:
Internationalization and Unicode
In my opinion one of the best and most efficient possibility to reduce the number of words
is to make use of hints. Please follow the Unicode Conversion Guide and SAP note 1034188.
Application colleagues should be contacted in order to find proper hints.
Please also note that report umg_vocabulary_statistic or um4_vocabulary_statistic is the best tool to evaluate tables for hint processing.
And the rest of the vocab, which can not be assigned by the hints method or by the SAP notes you mentioned, need to be assigned by native speakers (manual effort !).
As you can see, SPUMG is NOT just a tool to be executed by Basis staff.
It needs in deed collaboration between Basis, Application and native speakers.
And it should be clear that the duration of the scans can be quite high - therefore a trial & error approach will take time (especially for large systems).
Best regards,
Nils Buerckel
SAP AG -
Error in Import during unicode conversion
Hello,
I am doing Combined upgrade and unicode conversion to ECC6 SR3.
Upgrade is completed sucessfully. During import i get an error stating :
bSl Trace: Error 959 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-959 occurred when executing SQL stmt (parse error offset=92)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "REPOLOAD~0" ON "REPOLOAD" ( "PROGNAME", "R3STATE", "MACH" ) TABLESPACE PSAPSID620 STORAGE (INITIAL 209
7152 NEXT 0000010240K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 959)
error message returned by DbSl:
ORA-00959: tablespace 'PSAPSID620' does not exist
This tablespace doesnt exist as it was upgraded to PSAPSID700.
I checked DBLORA.TPL and it has two references of 620 :
index storage parameters
loc: APPL0 PSAP@SCHEMAID@ 0000
APPL1 PSAP@SCHEMAID@ 0000
APPL2 PSAP@SCHEMAID@ 0000
CLUST PSAP@SCHEMAID@ 0000
DDIM PSAPDIMI 0000
DFACT PSAPFACTI 0000
DODS PSAPODSI 0000
POOL PSAP@SCHEMAID@ 0000
SDIC PSAP@SCHEMAID@ 0
SDOCU PSAP@SCHEMAID@ 0000
*SLDEF PSAP@SCHEMAID@620 0000*
*SLEXC PSAP@SCHEMAID@620 0000
SLOAD PSAP@SCHEMAID@ 0000
SPROT PSAP@SCHEMAID@ 0000
SSDEF PSAP@SCHEMAID@700 0000
SSEXC PSAP@SCHEMAID@700 0000
Thanks,
FBKHi Volker,
Thank you very much. Stupid error :-).
I also did step 2 with fixr3owns yesterday with SAPINST and then it worked. I got to step 3 "iSeries Installation Step", but got an error in SAPINST when "Creating infrastructure for SAP system BND". I logged off SAPINST, patched CRTR3SYS and started SAPINST again and then got the error in step 2 wirh fixr3owns.
I´m now past step 2 and in step 3 "iSeries Installation Step". And I get the same error as I got yesterday...
From the job log:
TMKSVR request processor: request was successful
Processing request from client 10.96.220.5:4350.
EXECUTE CRTR3SYS SID(BND) GLOBALHOST('SAP002') FORCEPROF(*NO)
ADBHOST('SAP002') 1 N
Keyword GLOBALHOST not valid for this command.
Keyword FORCEPROF not valid for this command.
Keyword ADBHOST not valid for this command.
Error found on CRTR3SYS command.
Errors occurred in command.
error: call_AS400_command: "CPF0006" caught after "CRTR3SYS SID(BND)
GLOBALHOST('SAP002') FORCEPROF(*NO) ADBHOST('SAP002')"
I can run "CRTR3SYS SID(BND) GLOBALHOST('SAP002') FORCEPROF(*NO)" manually.
Do you have any ideas?
Best regards
Henrik Hviid -
Unicode Conversion : Import Error in ABAP SAPCLUST Error
Hi
I am doing the unicode conversion ..
The export of the database is successful.. But during the import it is giving an error.
Export is done as per note 552464 (Code Page 4103)
Platform is windows server 2003 / Oracle 10.2
Loading of 'SAPCLUST' import package: ERROR
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "CTSINTCOSNW5 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "CTSINTCOSNW5"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x Intel 801586 (Mod 4 Step 9)"
(DB) INFO: CLU4 deleted/truncated #20070301165425
myCluster (63.7.Imp): 2113: inconsistent field names (source) : physical field K1N05 appears as logic K1N5.
myCluster (63.7.Imp): 2114: further investigation recommended.
myCluster (63.7.Imp): 1952: error when checking key field consistency for logic table TACOPC .
myCluster (63.7.Imp): 1955: logic table is canonical.
myCluster (63.7.Imp): 1958: received return code 2 from c3_uc_check_key_field_descr_consistency.
myCluster (63.7.Imp): 1252: unable to retrieve nametab info for logic table TACOPC .
myCluster (63.7.Imp): 8096: unable to acquire nametab info for logic table TACOPC .
myCluster (63.7.Imp): 2835: failed to convert cluster data of cluster item.
myCluster: CLU4 *00001*
myCluster (63.7.Imp): 320: error during conversion of cluster item.
myCluster (63.7.Imp): 323: affected physical table is CLU4.
(CNV) ERROR: code page conversion failed
rc = 2
.--============--
RSCP - Error
`----
(DB) INFO: disconnected from DB
D:\usr\sap\ABU\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ABU\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070301165425
Can any one help please ?
Thanks in advancehi,
could you please have a look to SAP Note 902817 - Inconsistencies in cluster tables (log vs phys field name)
Cheers,
-Sunil -
SAPInst Export Error during Unicode Conversion
Hello,
I started SAPInst, to export the source instance (for unicode conversion).
During the export preparation phase, I get the following error (in SAPInst)
ERROR
CJS-00030: Assertion failed: in component: NW_getDBInfo step: fillContextat this point the dbtype has to be != ind
ERROR
MUT-03025 Caught ESAPinstException in Modulecall:
ESAPinstException: error text undefined
ERROR
FCO-00011 The step fillContext with step key
|NW_Prepare_Export| ind| ind | ind | ind |0 |0 |NW_GetSidromProfiles |ind |ind |ind |ind |2 |0 |NW-getDBInfo |ind |ind |ind |4 |0 | fillContext was executed with status ERROR
Please help me how to rectify this error.
Thanks,
HaleemHello,
I recently experienced this problem, and it seems that when executing this step the <sid>adm account needs to be defined to use C shell. If its already set up to use C shell, check the <sid>adm logon scripts to make sure all the environment variables are being set correctly.
Regards,
Brad -
Error during Unicode Conversion at DDNTF table
Hello
We are doing a Unicode Conversion for our CRT systems. This system now
is a SAP CRM 7.0 SR1 ABAP.
We have performed preparatory steps (SPUMG, checks, updating R3load,
R3ldctl, R3szchk, dboralib, ...),
but when we start Import process we get an error in SAPSDIC package.
The error looks like:
*************************+
(RTF) ########## WARNING ###########
Without ORDER BY PRIMARY KEY the exported data may be unusable
for some databases
(EXP) INFO: table DDNTF will be exported with sorting
(RSCP) ERROR: 'DDNTF' in UMGCCTL: Guess has illegal value.
(RSCP) WARN: DDNTF: Missing in UMGSTAT,
ERROR in nametab conversion
conversion of nametab table 'DDNTF ':
rscpMCStartTab: rc = 128
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/CRT/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/CRT/SYS/exe/run/R3load: END OF LOG: 20091229193651
Any idea??
Thanks in advance
RegardsYes I executed this Report using Menu Tool Bar.
The first execution gave me some errors regarding some tables existing at database level but not in DDIC. We ignored this errrors because those tables are not important.
But the last try, we decided solve this inconsistencies deleteting those tables at database level, repeting report RADUCNT (in this case no errors appeared) and repeting the export with the same error..
Now, we have seen in Tabscript STATUS of SPUMG there are some errors regarding DDNTF inconsistency found at table control. Reason 4. But this reason means that faillback codepage missing at table control for this table. But as far I know, I can't fill failbak field for this kind of table...
So know I'm reseting SPUMG, and reestarting again..
But I don't understand what is the problem
In a few minutes I will you inform about results
Meanwhile is anybody have any suggestion or idea... please let me know
Thanks! -
Error during Unicode Conversion - Import
Hi,
I am doing a Unicode conversion, done with the system export, while doing the
import during the Import ABAP phase system is throwing the error with R3load.
R3load -testconnect fails with following error.
emalonsbx002:wuuadm 18% R3load -testconnect
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
R3load: START OF LOG: 20071113095228
R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
R3load: version R7.00/V1.4 [UNICODE]
Compiled Oct 20 2007 06:20:06
R3load -testconnect
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1033
DbSl Trace: CONNECT failed with sql error '1033'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1033
DbSl Trace: CONNECT failed with sql error '1033'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1033
DbSl Trace: CONNECT failed with sql error '1033'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1033
DbSl Trace: CONNECT failed with sql error '1033'
(DB) ERROR: DbSlErrorMsg rc = 99
R3load: job finished with 1 error(s)
R3load: END OF LOG: 20071113095230
Please let me know if anybody have any idea on this.
Thanks in advance.Your database isn´t fully started yet (in shutdown or startup) - check your alert.log
Also see
Note 655240 - Composite SAP note: ORA-01033
Markus -
Inplace unicode conversion - error during import in step 2
Hi,
We are having problems when running the unicode conversion import in step 2: Load Kernel Library. The problem occurs when SAPINST runs the FIXR3OWNS program. We can run FIXR3OWNS manually when logged in with QSECOFR.
From the sapinst_dev.log file:
TRACE [iaxxco4sys.cpp:57]
iastring COS4SystemConnect::executeCommand(args_t const& _args)
OS4Trace: Executing remote iSeries command: FIXR3OWNS LIB(SAP700UNEW) OBJ(*ALL).
TRACE [iaxxejsbas.hpp:451]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception
TRACE [iaxxcwalker.cpp:301]
CDomWalker::processStep()
From the job log:
R3ADMAUTL.
Authority given to user *PUBLIC for object R3DIR in SAP700UNEW object type
*MENU.
Object authority granted.
Object R3KERNEL in SAP700UNEW type *MENU not secured by authorization list
R3ADMAUTL.
Authority given to user *PUBLIC for object R3KERNEL in SAP700UNEW object
type *MENU.
Object authority granted.
Object R3MAIN in SAP700UNEW type *MENU not secured by authorization list
R3ADMAUTL.
Not able to allocate object R3MAIN in SAP700UNEW type *MENU.
error: call_AS400_command: "CPF2211" caught after "FIXR3OWNS
LIB(SAP700UNEW) OBJ(*ALL)"
What could be wrong? It is our SIDOFR user?
Best regards
Henrik HviidHi Volker,
Thank you very much. Stupid error :-).
I also did step 2 with fixr3owns yesterday with SAPINST and then it worked. I got to step 3 "iSeries Installation Step", but got an error in SAPINST when "Creating infrastructure for SAP system BND". I logged off SAPINST, patched CRTR3SYS and started SAPINST again and then got the error in step 2 wirh fixr3owns.
I´m now past step 2 and in step 3 "iSeries Installation Step". And I get the same error as I got yesterday...
From the job log:
TMKSVR request processor: request was successful
Processing request from client 10.96.220.5:4350.
EXECUTE CRTR3SYS SID(BND) GLOBALHOST('SAP002') FORCEPROF(*NO)
ADBHOST('SAP002') 1 N
Keyword GLOBALHOST not valid for this command.
Keyword FORCEPROF not valid for this command.
Keyword ADBHOST not valid for this command.
Error found on CRTR3SYS command.
Errors occurred in command.
error: call_AS400_command: "CPF0006" caught after "CRTR3SYS SID(BND)
GLOBALHOST('SAP002') FORCEPROF(*NO) ADBHOST('SAP002')"
I can run "CRTR3SYS SID(BND) GLOBALHOST('SAP002') FORCEPROF(*NO)" manually.
Do you have any ideas?
Best regards
Henrik Hviid -
Error during export of ECC 6.0 system for unicode conversion
We have upgraded a 4.7 system to ECC 6.0 running on MSSQL 2000. We have the latest r3load, and are using the Netweaver 7.0 sapinst to perform the system copy (export) to convert to unicode. Our goal is an exported system which we can use on a clean install once we have de-installed SAP and SQL 2000 and installed MSSQL 2005.
When running the export, the r3szchk finishes and then the next phase runs. But it gets almost all errors (so we are stopping the export).
The export_monitor.log is shown below, and also an example of one of the table logs shown here as well. but its almost as if every table hits the same problem, BSIS, MSEG, EDIDS etc.....
If you look at the ACCTIT.log, it looks like the SQL/stored preocedure error is as follows, but not sure what this means:
check NameTab width SQL DbSlRead on DDNTT_CONV_UC failed for table T002 with rc 24
Export_Monitor.log
==============
NFO: 2008-08-25 17:30:11
Export Monitor is started.
CONFIG: 2008-08-25 17:30:11
Application options:
dataCodepage=4103
dbType=MSS
exportDirs=S:\ABAP
installDir=C:\Program Files\sapinst_instdir\NW04S\LM\COPY\MSS\EXP\CENTRAL\AS\EXP
jobNum=3
loadArgs=-stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=D:\usr\sap\ED0\SYS\exe\run\R3load.exe
sapinst=
server=
trace=all
tskFiles=yes
CONFIG: 2008-08-25 17:30:11
List of packages with table structure: 'SAP0000'.
CONFIG: 2008-08-25 17:30:11
List of packages with views: 'SAPVIEW'.
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask run
Unloading of 'ACCTIT' export package is started.
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask run
Unloading of 'BSIS' export package is started.
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'ACCTIT' export package:
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -ctf E S:\ABAP\DATA\ACCTIT.STR S:\ABAP\DB\DDLMSS.TPL ACCTIT.TSK MSS -l ACCTIT.log
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask run
Unloading of 'CMFP' export package is started.
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'BSIS' export package:
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -ctf E S:\ABAP\DATA\BSIS.STR S:\ABAP\DB\DDLMSS.TPL BSIS.TSK MSS -l BSIS.log
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'CMFP' export package:
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -ctf E S:\ABAP\DATA\CMFP.STR S:\ABAP\DB\DDLMSS.TPL CMFP.TSK MSS -l CMFP.log
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'ACCTIT' export package from database:
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e ACCTIT.cmd -datacodepage 4103 -l ACCTIT.log -stop_on_error
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'CMFP' export package from database:
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e CMFP.cmd -datacodepage 4103 -l CMFP.log -stop_on_error
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'BSIS' export package from database:
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e BSIS.cmd -datacodepage 4103 -l BSIS.log -stop_on_error
ERROR: 2008-08-25 17:30:12 com.sap.inst.migmon.LoadTask run
Unloading of 'ACCTIT' export package is interrupted with R3load error.
Process 'D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e ACCTIT.cmd -datacodepage 4103 -l ACCTIT.log -stop_on_error' exited with return code 2.
For mode details see 'ACCTIT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-08-25 17:30:12 com.sap.inst.migmon.LoadTask run
Unloading of 'CMFP' export package is interrupted with R3load error.
Process 'D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e CMFP.cmd -datacodepage 4103 -l CMFP.log -stop_on_error' exited with return code 2.
For mode details see 'CMFP.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-08-25 17:30:12 com.sap.inst.migmon.LoadTask run
Unloading of 'BSIS' export package is interrupted with R3load error.
Process 'D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e BSIS.cmd -datacodepage 4103 -l BSIS.log -stop_on_error' exited with return code 2.
For mode details see 'BSIS.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
etc.....
ACCTIT.log
=========
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: START OF LOG: 20080825191346
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: version R7.00/V1.4
Compiled Aug 18 2008 23:55:23
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -ctf E S:\ABAP\DATA\ACCTIT.STR S:\ABAP\DB\DDLMSS.TPL ACCTIT.TSK MSS -l ACCTIT.log
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: job completed
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: END OF LOG: 20080825191346
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: START OF LOG: 20080825191347
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: version R7.00/V1.4
Compiled Aug 18 2008 23:55:23
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e ACCTIT.cmd -datacodepage 4103 -l ACCTIT.log -stop_on_error
(DB) INFO: connected to DB
(EXP) WARN: check NameTab width SQL DbSlRead on DDNTT_CONV_UC failed for table T002 with rc 24.
(DB) ERROR: DbSlErrorMsg rc = 99
(EXP) WARN: check NameTab width SQL DbSlRead on DDNTT_CONV_UC failed for table CDPOS with rc 24.
(DB) ERROR: DbSlErrorMsg rc = 99
(EXP) WARN: check NameTab width SQL DbSlRead on DDNTT_CONV_UC failed for table TACOB with rc 24.
(DB) ERROR: DbSlErrorMsg rc = 99
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, skip: no data found; probably old SPUMG.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) WARN: UMGCONTAINER has 9 more problems.
(RSCP) WARN: UMGSETTINGS nametab creation: status not available, no table entry.
(RSCP) INFO: Global fallback code page = 0000
(RSCP) INFO: Common character set is 7-bit-ASCII
(RSCP) INFO: Collision resolution method is unexpected !
(RSCP) INFO: R3trans code pages = AskSPUMG
(RSCP) INFO: EXPORT TO ... code pages = AskSPUMG
(RSCP) INFO: Check for invalid language keys: active, by default
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 0
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 0
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 0
(GSI) INFO: dbname = "ED0ecc6dev "
(GSI) INFO: vname = "MSSQL "
(GSI) INFO: hostname = "ECC6DEV "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "ECC6DEV"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "8x AMD64 Level 6 (Mod 23 Step 6)"
(BEK) ERROR: SAPSYSTEMNAME not in environment
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: END OF LOG: 20080825191348> We will quickly implement the UC as a separate project, not put it off forever.
VERY good decision!
> But as we have single code page, no JAVA integration, no web integration (SOA) etc... the added complexity on our already short timeframe is more than we care to take on at this point.
Happy upgrading!
Our upgrade from 4.7 to ERP 6.0 was one of the smoothest I've made.
Markus
Maybe you are looking for
-
Apple Remote Desktop and Airport
I can connect ARD and ftp to a G4 from a Macbook both running 10.4.11. using my local wireless network (Airport Express). I'd like to be able to do these things from a remote location. I've followed instructions to port forward and to fix a static IP
-
Windows 8.1 will not boot anymore. Please help!
I have a Macbook Pro mid 2012. It has been running Windows 8.1 via bootcamp perfectly fine for almost six months until this morning. I went to turn it on and I am taken to a screen that says "Preparing Automatic Recovery". From there, I am taken to a
-
Hello everyone ... I have a problem that has many answers on this site, but i cannot understand them (damn newbie me ! :)) ). I use a JFileChooser to save a file and I want the extension of the file to be automatically appended to the filename. I use
-
Hi , i want to migrate CS-master data objects thru ALE from 4.6c. Please tell me how to find the corresponding message types, Idoc types, function Modules and respective Inbound Process Codes for 1. Functional Location ,2. Equipment ,3. Installed B
-
Hi, all. I posted questions before when I was stuck, and you all were very friendly and helpful. I am having difficulty understanding how to create, POST() to, and then REQUEST() information stored in session variables using Dreamweaver. I am develop