Uninstalling PS CS4 Extended after upgrading to PS CS5 Extended

I finally acclimated to my upgraded to PS CS5 Extended after transferring over presets, brushes, actions, etc and decided to uninstall CS4.  Of course now when I open CS5, I receive an error message indicating the some of the support files are missing and I need to reinstall PS CS5.  Since this was an upgrade from CS4 that is no longer on the computer, do I need to reinstall CS4 and then reinstall the upgrade to CS5?  Or is there a way to simply reinstall CS5 and be done with it?  Since this was an upgrade purchased via download, and I deleted the disk image, where do I find the download for the upgrade?  Any help or suggestions are much appreciated.

All Adobe updates are full installers.
If the update installer does not find a qualifying prior version installed, it will simply prompt you for the old serial number as well as the new one.

Similar Messages

  • How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open

    How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open.

    InDesign files are compatible wih all the newer versions. A cs4 file sh
    Could you answer a few questions to help us better understand the issue:
    If you are trying to open the files by double clicking them, do they give any error??
    Have you tried to drag a file into indeisgn, if yes what happends when you do that??
    Is there any error message that you get??
    Also if you create a new files in InDesign CC does it show up as grey like the cs4 files or do they open fine??

  • I am using the DSGN CS4 CT now upgrade to DSGN CS5.5 MAC UPG EPA PROMO APAC CS4 (After installed CS5

    I am using the DSGN CS4 CT now upgrade to box set DSGN CS5.5 MAC UPG EPA PROMO APAC CS4 (After installed CS5.5 s/n works but the old one CS4 s/n not work) Pls let me know the solution sooner.

    So your CS4 serial number is not accepted when you try to enter it as a qualifying version?

  • Photoshop CS6 Extended upgrade from Photoshop CS5 Extended

    I am running the Teacher/Student edition of Photoshop CS5 and plan to up grade to Photoshop CS6 Extended non- eacher/Student edition.  Will the be any complications with this upgrad. 

    Hi Jerry,
    While upgrading you should maintain the same form of licenses, which is if you haveretail CS5 then do get the retail upgrade of CS6,
    If the cs5 version is volume then do get the volume upgrade. Please refer to this link for the upgrade path,
    http://helpx.adobe.com/x-productkb/policy-pricing/upgrade-upsell-paths-cs5-cs5.html
    Regards
    Rajshree

  • Can I upgrade from Photoshop CS5 Extended to Photoshop CS 6, because I don't use the 3D features.

    Can I upgrade Photoshop CS5 Extended just to Photoshop CS6, because I don't use the 3D features. I only use the picture corrections and special picture features?

    Yes you can upgrade to CS6 Standard from CS5 Extended for $199.
    If you are in another country, check your local Adobe Store and Click on Photoshop CS6 Upgrade,there is a dropdown list of qualifying products under "I own..."

  • What happens to PS CS3 after upgrade to PS CS5?

    I have two Win XP computers that had been running PS CS3.  I purchased the upgrade to PS CS5 and installed it in both computers successfully.
    Now I have a third Win XP computer on which I wish to run PS.  Do my recently upgraded CS5 upgrade versions require the old CS3 version to be present and activated in their respective computers?  Or can I deactivate one of the old CS3 versions and then install PS CS3 into the new third computer?

    Now I have a third Win XP computer on which I wish to run PS.  Do my recently upgraded CS5 upgrade versions require the old CS3 version to be present and activated in their respective computers?  Or can I deactivate one of the old CS3 versions and then install PS CS3 into the new third computer?
    You bought an upgrade, not a new license. There is no way for you to run on a third machine without disobeying the legalities of the license agreement, as you have exhausted your 2 activations of your one license. The technical aspects have been discussed a couple of times, so do a search, but in light of your setup they become more or less irrelevant.
    Mylenium

  • Remove/Uninstall 7.2.x after upgrade to LE 8?

    I just upgraded to LE 8 and was wondering if I can dump 7.2.x. If I can dump 7.2.x is it as easy as tossing the Logic Express 7.app in the trash, or is there a more comprehensive and "clean" way of doing this? Thanks for the help!

    It is safe to uninstall 7.2. Make sure first that you have the original 7.2 serial number safe, and that your projects are all backed up just in case. If you have the upgrade version of Logic Express 8, then you can re-install using the serial number with no copy of 7.2 installed. Although the Logic Express 8 installer expects to see the 7.2 version installed it will prompt for your previous version serial number if it cannot find a version of 7.2 installed. You can simply drag to the trash the old 7.2 application or use Appzapper or similar to remove other associated plist files - I would suggest for safety just removing the main application icon by dragging to the trash is fine. There's a hidden file which contains the serial number on the main hard disc but this would be lost if you carried out a full clean install of Mac OS at a future date.
    Message was edited by: moogan

  • Can't stay connected to Linksys RE1000 extender after upgrading to Yosemite

    Ever since upgrading to Yosemite I'm having trouble staying connected to the WIFI network that I have extended through a Cisco (Linksys) RE1000 Wireless-N extender. It was working fine prior to the upgrade to the final version (even through all Yosemite preview versions).
    I've reset and resetup the RE1000 and I continue to have the problem. The WIFI seems to work fine when I connect to other WIFI networks, it's just this one for some reason.
    Anyone using one of these?

    I've reset and it says it doesn't work with Yosemite... currently engaged in a twitter conversation with @LinksysCares.
    So you buy an extender (two years ago) and already it's become useless.
    Thanks Apple & Linksys.

  • CS4 challenge after upgrading from Vista to Win7

    went thru a nightmare having Win7 installed. was a clean install. now can't get CS4 to install. did the adobe helper thing and remove whatever was listed in the programs left from CS4. (I do have elments 7 installed, but that has not been an issue) it reviews everything and then says contact customer service.i found them less than helpful so far.  any clue?

    If the clean install was done without a format, there's a folder on your C: drive named Windows.old.
    This was the case with my 7 install and I had to delete the Windows.old folder to get things going.
    Mike

  • After upgrading to Photoshop CS5, my custom shortcuts no longer work.

    They show up correctly in my pull down menu bars but they no longer do anything when I hit the keys.  I'm baffled enough to go back to CS4 where they still work.  Anybody?

    I just did the upgrade and imported my settings.  Sorry but it's been 
    quite a while since my upgrade and I don't remember the specifics.  
    However, as I said, the shortcuts are displayed in the active pull 
    down menus just as the normal shortcuts are.

  • PS CS5 upgrade to PS CS5 extended problems

    Hi I've just upgraded my standard PS CS 5 to the extended version. It downloaded with no problems and also appeared to install with no problems
    but the PS I have still seems to be the standard version. How can I check this and if it is still the standard version what am I doing wrong.
    Thanks hugely for any help.
    Cheers,
    Philip

    I am having the same issue.
    In about PS Splash it only says CS5. Does not show the "extended" like it does on other machines.
    There is no 3D tab/section.
    I was able to sucessfully upgrade 2 other machines.
    But the third is giving me a hard time.
    Here is what I have tried...
    Remove all CS5 apps (not prefs).
    Installed on a new Admin account.
    Machine is a Mac Pro Xeon 8 gb ram OS X 10.6.4
    Any suggestions are appreciated

  • Help files missing after upgrade to PS CS5

    Upgraded from CS4 to CS5... reinstalled in a second time... still unable to load help files... second install, same messages saying ...AIR, Media Player and Help did not install...
    Help files in Lightroom 3 also did not load..

    Solved problem by finding a folder in CS5 Photoshop set up files..  under the folder payloads.. and installing setup file for Adobe Help from there.. also installed updates from Adobes website for Media Player and Air

  • Once again: prints too dark after upgrading CS3 to CS5

    Hi, I know this has been discussed before, but I haven't found a solution to my issue in the existing threads. I am most likely missing something obvious, and perhpas someone here can point it out to me.
    I recently upgraded from CS3 to CS5. In both editions of photoshop I followed Eric Chan's recipe for setting up the print workflow: http://people.csail.mit.edu/ericchan/dp/Epson3800/printworkflow.html. In CS3 everything works as expected, i.e., the print matches the soft proof. Printing the same image from the same computer/monitor in CS5 produces a print that is much darker than the softproof or the CS3 print.
    In case this is relevant, my psd files are all in Adobe RGB 1998, I use the Epson supplied print diver (v5.51) for the Stylus 3800. I use the icc profile for Epson's Exhibition Fiber paper, which is what I am printing on. The conversion method is Relative Calorimetric with Blackpoint Compensation checked. Photoshop runs on a 32bit Windows XP SP3 machine.
    Any suggestions? Are there any settings that are not mentioned in Eric Chan's write-up that I should look at to find the source of the difference? Is there anything else that could account for the different prints?
    Thank you!
    Martin

    Thank you for the help! Here are the screen shots. I printed the wacked image from CS3 and CS5. In CS3 everything looks right, i.e. the soft proof matches the print. In CS5 the soft proof looks the same as in CS3, but the print is dark. A photo of the printout is attached at the end.
    CS3:
    CS5:
    Result:

  • Illustrator CS4 trouble after installing Lion upgrade

    "An unknown error has occurred" message when attempting to open Illustrator cs4 file after upgrading to Lion.
    I'm using a Mac Pro early 2008
    Processor  2 x 2.8 GHz Quad-Core Intel Xeon
    Memory  10 GB 800 MHz DDR2 FB-DIMM
    Graphics  NVIDIA GeForce 8800 GT 512 MB
    Software  Mac OS X Lion 10.7.2 (11C74)
    I have the entire CS4 Master Collection on this machine.
    Have not tried the other programs yet.
    Any help on easing this transition will be appreciated.

    Found this link: http://support.apple.com/kb/DL1421
    After downloading the Java for OS X Lion Update 1 Illustrator is now working.

  • No 3D Tools in Photoshop CS5 Extended!

    I upgraded from Photoshop CS5 standard to  CS5 Extended but can't see the 3D tools in the menu - just shows the standard menu... I re-downloaded and re-installed, but still no 3D. What am I doing wrong?

    How did you upgrade to Photoshop CS5 extended?  I didn't think Adobe was selling upgrades to Photoshop CS5 any longer.
    In any case, activation is where the differentiation is made, based on the content of the serial number - both use the exact same install.  Deactivate and reactivate with your new serial number and the features should show up.  You really didn't need to reinstall.
    -Noel

Maybe you are looking for

  • Time machine disk sharing

    Dear Common Wisdom: I have been using Time Machine for quite a while now, but I have a question about the empty space on my external HD. Must a HD being used to store backups be exclusively for Time Machine? Can I use the empty space for my own stora

  • Where can I get an adapter to allow plugging in a Shuffle to an Ipod dock?

    Where can I get an adapter to allow plugging in a Shuffle to an Ipod dock?

  • CAN Object Transmits Waveform on RTSI

    I have a question to the above mentioned VI. The ncWriteObj.vi is placed in a For loop here. Does this mean that the For loop is executed once every time an RTSI event occurs???

  • Information Message-Values for Ordinary deprec. have changed in dep. area 0

    We had changed the scrap value for few assests and when ever we goto AW01N i.e asset explorer ,it displays the message - Values for Ordinary deprec. have changed in dep. area 01 in fiscal year XXXX. The user doesnt this message  popping up every time

  • Time Machine Going Crazy (HELP)

    Hi. Last year I bought a 1 TB WD My Book and ever since I never had any problems with the backups, until yesterday. My internal hard drive currently has 996,13 GB and my home folder has 960, 63 GB (Above 1TB). The problem is when I try to do a backup