Unistalling and getting 7.4.2

I want to get 7.4.2 but it won't let me because I have the 7.5 version , how do I go back to older version ?

Getting the version that you want is only part of the fix.
To downgrade - D/L what version you want at - http://www.oldapps.com/downloadiTunesmac.php
Go to HD>Library>Receipts - remove the iTunesX.pkg to the trash.
Drag your iTunes app to the trash. B/U your iTunes Library and .xml files. B/U your iTS purchases.
Repair permissions with Disk Utility - install iTunes - repair permissions again.
Open iTunes - if all is well you can empty the trash.
MJ

Similar Messages

I've unistalled and reinstalled the latest version of iTunes...but I continue to get 'Runtime error R6034'...followed by 'Error 7 Windows Error 1114"

I've unistalled and reinstalled the latest version of iTunes...but I continue to get 'Runtime error R6034'...followed by 'Error 7 Windows Error 1114"....any help from anyone?

See Troubleshooting issues with iTunes for Windows updates.
tt2

HT4061 I have loaded on my lap top, unistalled and reinstalled itunes and keep getting Apple application support error 2. Any suggestions?

I have loaded itunes on my laptop, unistalled and reinstalled and keep getting "Apple Application support" error 2. Any suggestions?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally.
tt2

Trying to get my itunes to go back to english but is coming up Russian on windows 7. I initally installed English version and about 6 months ago it came back Russian. I have use all the suggestion including unistall and reenstall a new down load from appl

I'm trying to get my itunes to go back to english but is coming up Russian on windows 7. I initally installed English version and about 6 months ago it came back Russian. It was English for over 2 yrs. I have use all the suggestion including unistall and reenstall of a new down load from apple.

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

Itunes won't recognize my ipod nano 5th gen. it's recognized by the computer, but I get a message from itunes that says an ipod has been detected, but it couldn't be identified properly. i did all of the steps on the ipod assistant. unistalled and reinsta

Itunes will not recognize my Ipod Nano 5th g. It shows up on my computer. But Itunes gives me a message that says "An ipod has been detected, but it could not be identified properly. I did all the steps in the ipod assistant. Unistalled and reinstalled drivers and itunes. restarted ipod and even erased everything. It is recognized by other computers. And itunes recognizes my iphone fine. please help.

Have you restarted your computer? iTunes updated?

I can't sync my new purchases, saying computer not authorized, but when I try to authorize it says incorrect passcode when I know is correct. Already unistalled and reinstalled. help?

I am having trouble syncing my ipod nano with my desktop. I purchased new songs that show up on my desktop but cannot get them to sync to my nano. The computer keeps giving me the message it is not authorized. Then it asks for my passcode which it says is incorrect. Which how can that happen when I can still go into Itunes and purchases songs with the same passcode? The computer just keeps looping to "not authorized" and "incorrect passcode". But I was able to see my computer is 1 of 2 computers authorized but does not seem to be recognizing this. So, I called apple support and they had me unistall and reinstall itunes but I am still having the same problem. Does anyone have any suggestions how to get pass this? Any help would be great thanks!!

Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H.

When i go to unistall i get, this pack package can not be open.Verify that the pack package exists a

When i go to unistall i get, this pack package can not be open.Verify
that the pack package exists and that u can acess it.Or contact the application
vendor, to verify that this is a valid windows installer patch package.

I am using a new hp laptop that is running windows 7

Despite unistalling and reinstalling iTunes, I can't load the program. The error message "the program can't start because MSVCR80.dll is missing from your computer."

Despite trying to unistall and reinstall iTunes, I continue to get the message "the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem."

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99385)

HT1349 I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times.

I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times. I keep getting the error message to reinstall to fix the problem.

See if this post from turingtest2 fixes it : https://discussions.apple.com/message/24620553#24620553

I want to de-install mac-excel test version and get the error message: you have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. I am sysadm

I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?

Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
Go to System Preferences a open up the Users pane;
On the left side of the pane, you shuold see Login Options;
Enabled editing option clicking on the lock (it will ask your password);
Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
Select Enable Root Account (you can set a password, or not);
Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
Theorically, from this account you will be able to unistall the application.
After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps

TS1717 since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?

since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?
these are the boxes that open up:
I am unsure as to wether I need to unistall and start again but then worry about the vast amount of songs already in the folder that I would have to reload.

anyone able to help me with the above?

Client stops working and getting DCOM error in event viewer

Hi
I am getting these errors after upgrading the client from 2007 to 2012.. the client works for a certain amount of time then stops functioning as expected. Logs not moving and get error when manually cycling policy etc from client.
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{F80A8D57-D338-43FF-A5E6-5D093EA80775}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services
administrative tool.
I have checked the DCOM permissions for launch and activate for system account and they are set to allow...
its not happening on all clients which is strange

Hi Jason,
The service is running and the ccmexec.log does not stop but its rolled over since the issue occurred. About 30% of the logs continue logging and the rest stop with no action.I done a WMIDiag and I could see issues with missing namespaces and DCOM errors.
I am unistalling the client and reinstalling which fixes the issue for a short period of time, then I will do a WMIDiag once its working then monitor. Once it breaks I will do another WMIDiag and fetch the logs in to see if there are any indicators to why
this is happening.
Is there anything else you would do at this point?
From one client.. WMIDIAG
An example of missing instance and all were missing in this class!
root/ccm/Policy/machine, 'Select * From CCM_Service_HostedClass WHERE Description = "CPApplet Client Action" AND CLSID = "{F80A8D57-D338-43FF-A5E6-5D093EA80775}"' did not return any instance while AT LEAST 1 instance is expected.
From another client and on both
76815 12:03:57 (0) ** => This is an issue because there are still some WMI classes referencing this list of providers
76816 12:03:57 (0) **    while the DCOM registration is wrong or missing. This can be due to:
76817 12:03:57 (0) **    - a de-installation of the software.
76818 12:03:57 (0) **    - a deletion of some registry key data.
76819 12:03:57 (0) **    - a registry corruption.
76820 12:03:57 (0) ** => You can correct the DCOM configuration by:
76821 12:03:57 (0) **    - Executing the 'REGSVR32.EXE <Provider.DLL>' command.

Tons of issues with iTunes 7.5 - And Getting Worse?

Problem 1 - Upgraded to iTunes 7.5. For some reason lost my music library, so now if I synch with my iPod I wil lose all my music. I will have to reload my music to iTunes, but that is the least of my issues....
Problem 2 - When I could get connected to the iTunes store I get this error. "iTunes could not connect to the iTunes Store".
Problem 3 - After trying to troubleshoot problem 2 and re-installing iTunes I am now getting the error iTunes could not connect to the iTunes Store.
Problem 4 - When I remove iTunes during troubleshooting it is also removing my CD-RW drivers as well and when I restart Windows after removing iTunes my drivers have to reload.
Problem 5 - During the breif moment when I could connect I bought a movie and since it things the network is not there it won't restart this.
I have now spent hours trying to troubleshoot this and am getting no where. I am so frustrated I am about ready to trash my iPod and iTunes and go buy a Zune...now that's frustrated!
What I have done so far:
A - updated iTunes to 7.5.0.20
B - updated Quicktime to 7.3
C - updated DirectX to 9c (already was, but I re-installed just in case)
D - update to the latest video drivers for Radeon 9600 7.11
E - update to the latest version of the ATI Catalyst Suite (and tried without, currently I have removed this)
F - Checked my display to be sure it is 32bit and at full acceleration.
G - Ran dxDiag
H - Unistalled and re-installed everything at least once, some thing more than once.
I - Turned off my Firewall.
J - Ran iTunes Network test, which says the network is fine!!
Here is that file:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
NVIDIA AWRDACPI
iTunes 7.5.0.20
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
The current local date and time is 2007-12-04 22:47:22.
Video Display Information:
RADEON 9600 SERIES
RADEON 9600 SERIES - Secondary
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {39515F23-A281-43B3-AB11-002341900F2C}
Description: Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler Miniport
IP Address: "removed"
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Tue Dec 04 22:09:19 2007
Lease Expires: Wed Dec 05 22:09:19 2007
DNS Servers: 24.56.133.69
24.56.133.69
24.56.133.70
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
What the Fricken Fracken Patty Whack is wrong with This!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I am a getting problem where every time I close out of itunes it doesn't save anything and i get these random error messages saying, "The Itunes library file cannot be saved. You do not have enough access privileges for this operation." This message never goes away cause as soon as i hit ok it just pops up again and again no matter what i am doing it pops up over that. I also have full admin settings for my windows account.

Memory Problem with SEt and GET parameter

hi,
I m doing exits. I have one exit for importing and another one for changing parameter.
SET PARAMETER exit code is ....
*data:v_nba like eban-bsart,
       v_nbc like eban-bsart,
       v_nbo like eban-bsart.
       v_nbc = 'CAPX'.
       v_nbo = 'OPEX'.
       v_nba = 'OVH'.
if im_data_new-werks is initial.
if im_data_new-knttp is initial.
    if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
       or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
      set parameter id 'ZC1' field v_nbc.
    elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
      set parameter id 'ZC2' field v_nbo.
    elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
      set parameter id 'ZC3' field v_nba.
    endif.
endif.
endif. *
and GET PARAMETER CODE IS....
get parameter id 'ZC1' field c_fmderive-fund.
get parameter id 'ZC2' field c_fmderive-fund.
get parameter id 'ZC3' field c_fmderive-fund.
FREE MEMORY ID 'ZC1'.
FREE MEMORY ID 'ZC2'.
   FREE MEMORY ID 'ZC3'.
In this code i m facing memory problem.
It is not refreshing the memory every time.
So plz give me proper solution.
Its urgent.
Thanks
Ranveer

Hi,
   I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
Sample Code :
Data declarations for the function codes to be transferred
DATA : v_first TYPE syucomm,
       v_second TYPE syucomm.
CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
Move the function codes to the program varaibles
v_first = gv_bdt_fcode.
v_second = sy-ucomm.
Export the function codes to Memory ID
EXPORT v_first
       v_second TO MEMORY ID c_memid.        "ZCCBPR1 --- Here you are sending the values to memory
Then retrieve it.
Retrieve the function codes from the Memory ID
IMPORT v_first TO v_fcode_1
         v_second TO v_fcode_2
FROM MEMORY ID c_memid.                                   "ZCCBPR1
FREE MEMORY ID c_memid.                                   "ZCCBPR1
After reading the values from memory ID free them your problem should be solved.
Thanks
Barada
Edited by: Baradakanta Swain on May 27, 2008 10:20 AM

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Unistalling and getting 7.4.2

Similar Messages

Maybe you are looking for