Unit to Be Inspected Tab during Inspection of Production Order

Dear experts,
During result recording of inspection lot from GR (QE01), there is a tab named " Unit to be Inspected" whereby users can record characteristics per serial no.. During result recording of inspection lot created during production order, the tab "Unit to be inspected" does not appear. Is there any way to make the particular tab appear in result recording for production order?
Thanks in advance

Dear,
Please check your inspection plan (QP02) ---> Operation --> Select Inspection characteristics ---> click on control indicators --> select Single result in Result Confirmation. --> Save it.
It is also depend on your sampling procedure. If you take the 10 sample in your sampling procedure then it will appeare for 10 times in result recording.
-Sandip
Edited by: Sandipsinh Shaktavat on Mar 6, 2012 12:07 AM

Similar Messages

Problem During Creation of Production Order

Dear Sirs
Hope you all are well. I am facing a problem in PPDM during creation of Production Order which is that when I try to release the order System shows me material availability error for BOM items but when I check those material in MMBE(stock overview )all materials are available in UN-restricted use stock. I am facing this problem and not able to resolve it please help me out in it.
Thanks
Regards ,
Haseeb Khan
Senior Consultant

Dear
Did you maintain Work Schedulimng View of the Material ??
Did you maintain any Production Storage Loaction in MRP2 view and same is appearing in Goods Movement Tab in CO11N screen with Movement Type 101 ??
Did you maintain the Operation Control Key -pp03 which should have Auto GR check box marked in OP00 ?? Goto Operation Control key -Detail information -Check whther Auto GR is marked or not ??
If you are using Serrial Number Profile and Serial Number , then Auto GR is not possible .Make sure that you are not haveing functionality because it does not support Auto GR fro serialised material and need to do it through MIGO/MB31/MB1C.
Make sure that you have used PP03-Control key only at last operation not all the operations.You need to maintain PP03 at Routing level and call the function by Read PP Master data at production order level (co02-function read pp master data )
Regards
JH
Edited by: Jiaul Haque on Feb 14, 2011 12:55 PM

Header Material Repeated during creation of production order

Sir,
I have defined bom as one component and 3 co product.
During creation of production order in operation overview i found header material is repeated in components.
Pl. suggest me where i have made mistake.
Regards,
Vivek

Hi
Check whether BOM is recursive or not? also check the movement type against the header material.
Also check in CO03>Goto> Material list
Regards
Anupam Sharma
Edited by: anupam sharma on Jan 30, 2012 12:17 PM

Error during release of production order - AFS Specific

Hi SAP gurus,
Iam getting error during release of production order in AFS specific system during COHV transaction. Error is ''Error calling ATP server'' and message no is AG022. But when we read the PP master data then this error is cleared and production order is released.
Thanks & Regards,
N. Laxman

hi
1. When mass conversion of AFS planned order to production order is performed via COHV, the resulting production order does not contain the SKU details of the component.
2. When a planned order is converted to a production order & an ATP is carried out on the production order, Message no.AG022 - 'An error occurred during Remote Function call on the ATP Server' is issued by the system.
so you need to use the note 1087613.
read the note and apply with the help of technical team ABAP and BASIS
-ashok

Batch Split during GR for Production Order Confirmation

Hi All,
We need to do batch splitting during GR for Production Order Confirmation.We are using CO11N for confirming the Production Order and in the PP settings auto GR is activated once the Confirmation is done.
Currently it is generating only single batch number for the complete quantity, but our requirement is that we need that system should create separate batch for each piece.
For ex.: Production Order is for 100 pce, when we do Production Order confirmation, system is automatically doing the GR by 101 movement type and it is creating one single batch for full 100 pce. But we want the batch number should be generated for 1 pce i.e. we want to split the 100 pce into 100 batches with 1 pce each.
Please let me know what can be done for this requirement.
Regards,
Ankit

Dear,
In OPK0 you need to active the screen Mill: Goods Receipt (8485) for confirmation profile for the single-screen entry.
Best way is use BAdI /SAPMP/SPLIT_CO11N for the Enter Time Ticket for Production Order transaction (CO11N)
you must activate BAdI implementation /SAPMP/SPLIT_POPUP and/or /SAPMP/SPLIT_CO11N for this BAdI
I have use the same BADI it will ask you number of split according to that it will split the GR line item.
Please refer this link,
http://help.sap.com/saphelp_dimp50/helpdata/EN/4e/1796374b088e5ce10000009b38f8cf/frameset.htm
Regards,
R.Brahmankar

Inspection for production order

hi all,
While I tried to generate inspction lot for production order automatically, i get an error message : inspction lot create fail. I've done these steps, is there any mistake here :
1. in material master, i set inpection type 03 and choose prefered inspect type and active options.
2. I've create an inspction plan with usage '1'(Produc) and status '4'(Release) and inspect operations with control key 'QM01', also aign MICs into them.
3. when i create product order with TCode 'CO01' and release this order, it can't create any inspection lot automatically, when i try to do this manually with menu, i get that error message.
Did i missing any setting?
thank u very much.

Dear,
In Material master, QM view in the insp type 03 details
check box-insp with material specification
Check box-insp with task list
In the above check box, which one ticked?
If both are ticked then you need to maintian material specification in QS61, or remove this tick from check box-insp with material specification in material master
So for inspection type 03 use routing with usage as 1 and status as 4 and control key as PP04 to specify the inspection characteristics.
when u cofirm that perticular operation it will ask to record the results. Inspection lot get genarated during order release this we can see in the order header data assignment tab. PP04 assignement says this operation is relevent for inprocess inspection and we need to assign MIC's for this which are relevent created in QS21 for this also sampling procedure created in QDV1
Also refer this link,
QM - 03 TYPE INSPECTION
Hope it will help you.
Regards,
R.Brahmankar

Stock Type X Quality Inspection in Production Orders

Hello,
I have the material 123EDFXXX that the Production order has set the Stock Type =X (Quality Inspection)...
We don´t know how was that set!! since that material has not active the QM Views in the material master.
There is another master data (prod version, route) or something else that is coping that value??

Hi Marco,
1.Pl check if QM was active before the creation of order.If so you need to delete all Material and accounting documents
2. Check in the work scheduling view in material master if the inspection stock is active box is active.then this could be the reason.
Regards
George

Avoiding creation of reservation during creation of production order

Dear gurus,
when we create a production order for a semifinshed material there are reservations created for the raw material used to produce the semifinished material ,what if I what to avoid the creation of material reservation .
I have tried out with setting in opl8 wherein we specify the creation of reservation on release of production order or on creation or never but it is not working otu please if u can help me out.
I what to create manual reservation for production orders......Is it possible?
Thanks in advance.

Dear ,
.As long as , you have BOM components are in stock , system will generate reservation for them when you create Production order where as if any of the component is not available in the stock then it will generate PR based on the material master set up because when you are creating production order or creating planned order through MRP , system performs material availablity check in the back ground and generate either reservation or PR automatically .
Secondly, you can not create Manual Reservation , See the Std SAP message .Message no. M7 126
You entered an order whose category only permits automatic reservations. The following order categories do not allow manual reservations:
10 PP production order
20 network
30 maintenance order
40 batch order (process manufacturing)
50 inspection lot.
So conclusion is you can't stop creation of reseravtion .Curious to know why you do not want reservation for PO ?
Hope this is clear
Regards
JH

Batch classification during GR against production order using txn MIGO

Hello All
       I am usng batch classification during for movement type 101, when am doing the GR against production order using txn MB31 the system automatically navigates to classification screen wherein i need to enter the characterstic value & it all goes well, I can also view the stock with batch no and the classifcation value when the GR is being done with txn MB1.
      But when am dong the same thing i.e. GR against production order using txn MIGO system doesnt navigates to classification screen for characterstic value entry and am able to do the posting. I want that system must navigate to classification screen automatically if i do the GR using MIGO also as it doen in the case of txn MB31.
       Please suggest what settings are to be done for the same, I am unable to figure out why the system is behaving in this manner. Kindly provide your inputs to sort out this issue. Waiting for your valuable inputs.
Regards,
J K Tharwani

Dear,
did u refer SAP Note 519303 ?
After keeping Batch Classification as 4 in OMCV, in MIGO, it will start showing the Batch Classification button under "Batch" Tab, it will not show the Batch Classification Pop-up automatically as it shows in case of MB31.
If you wan users to enter the characteristics values mandatorily in the Batch Classification then in CT04 for these characteristics activate Entry required indicator in "Basic Data" Tab
SAP Note 519303
Please refer this also,
[MIGO|Re: How can I get the MRP history?]
Regards,
R.Brahmankar

Delivery document during GR of Production order

Hi All,
I am working on MTO scenario...where we have created the production order against sales order.
So i want to configure during Goods recipt of the Production order system should create the delivery document for sales document.
Can you please provide me the solution.
Regards,
Shailendra

Hi
I dont think there is any standard config for this that upon GR delivery should be created. You may need to write a program with the logic of creating the delivery automatically upon posting of the GR against prod order.
Please advice if you have any question.
Thanks

Goods receipt during reversal of production order

Hello ALL,
I use production orders confirmation with Aut.goods receipt.
Example is the following:
I confirm 3psc of production order for semi-finished product, so system posts 3pcs with 101 movement type.
Production order status is DLV
Then 1 pc is consumed for the next production step, it means the physical stock is now 2 pcs.
In the next step I want to reverse the confirmation of production order with movement type 102 ( I use CO13 )
I get message in COGI - Deficit of unrestricted-use - 1pc and I am not able to reverse goods receipt at all. Production order status is still DLV. Reversal of material document is impossible.
I know it is reasonable but my question is: is it possible to reverse goods receipt only partially during CO13 - for 2 pcs and get production status PDLV ???
I know the sulution is to return missing 1 pc, but I would like to avoid this
thanks for help
KS

dear KS,
as far as i know...
...every confirmation entered in the system can be canceled : if you entered three confirmations (just an example) for an operation, you can also cancel three confirmations and all confirmations automatically created by them
1. you can change confirmations or partially cancel them;
2. if you also activate user statuses when confirming an operation, these statuses are not automatically canceled when you cancel the confirmation;
3.if you cancel a confirmation, the functions that were triggered by a trigger point are not revoked (for example, creating a rework operation).
good luck!

How to create the Batch Automatically during creation of Production order

Hi All,
I wanted to create the Batch Automatically for the Specific order type during creation.
Not for all order type so OPKP transction will not work for me.
Please suggest any way or user exit any production order.
Thanks,
Amit Shah

Hi All,
Thanks for your inputs.
1. Why we want create the Batch Auto -
      For Std Production Order type we want to generate Batch Automatically.
      For Re-work Production Order type we don't want Batch Created Auto.
      If you have better solution please let me know.
2. Scheduling profile.
      I think I misunderstood your solution.
      You want to say that mainatin the Schd profile in the SPRO with repect to Sub Schdler.
      Already client is maintaining the Schd Profile in the Material Master.
       please correct me if i am wrong.
Thanks,
Amit Shah

Control availability check during release of production order

friends,
Can you guys help me find the user exit/BADI which will allow me to control the release of production order after the availability check is complete.
In detail, the scenario is that : based on a flag on material master, I should be able to ignore this product's availability during release. I cannot change the availability check to "KP" ( No check) as this product can be sold seperately. So what I thought was that if I get to control the availability check during production order release I would be able to ignore this product before check or may be after check and before the status change.
I found PPCO0021 exit and function module EXIT_SAPLCOZR_003 which is actually intended for release control for automatic batch determination. I am not sure if I can use this.
Please let me know if you guys have any idea.
Thanks
Prod_Planner

Let me rephrase the scenario :
I have a production order for a product P1 which consumes raw materials R1 and R2. R1 is supplied by a nearby vendor every 1 hour to my plant so I do not need to worry about the availability of it when releasing the order but R2 availability should be taken into consideration. So, function 1 or 2 in OPJK will not work (as release need to be stopped if R2 not available) hence I will be using 3. If I use 3, R1 availability is also considered hence the whole order is not released. I will maintain a flag on material master so if R1 has flag, I need to ignore R1's availability but still considering R2.
As mentioned, I found PPCO---21 which could help me but need your help to understand if there is any other way.
Thanks
Prod_Planner

Goods movement tab not coming in production order

Dear PP Gurus,
I have created a production order and done the partial confirmation of this production order.
I am not able to see the Goods movement tab in the display.
When i go to T CODE CO14 and enter the order number .
I am not able to see the goods movement tab .
Please help. I think i have misd something in config.
Best regards

Dear Aadi,
At the time of Booking, You are not entered the good movement tab, thats why i you r not able tyo see the goods movement in the diaplay of confrimation.
If U want Material is to be posted at the time of confimation
1 ) Then make a proper setting as backflush ( maintain the back flush In material master MRP 2 View, or in work center or in routing ( component allocation screen
2) to amake a Auto GR for header material- assign the control key with auto GR on the final operation in the routing ,
3 ) Click the goods movemnt tab at the time of confrmation and change the quantity as per the actual consumption and Post
4 IF u post the good movemnt at the time of confimation , you can see in the diapaly mode otherwise U cannot see the goods movement Tab
regards,
Sundaresan
Edited by: Sundaresan . E. V on Mar 15, 2010 10:30 AM

Unit of measure - rounding off during creation of planned order

Dear All,
We have defined one material OIL in MM41 and its UoM is EA also we have put alternative UoM is L(liter).
now we create BOM of semifinished material we use this oil as a component and enter its value in decimal points.
e.g 0.375 EA
During planned order creation or REM backflush system convert this quantity to 1 EA ,WE dont want this automatic conversion .
We have uploaded all master data in production and now it is very difficult to change all BOM
So what is the solution of this that system can not convert qty (rounding off).EA
Kindly reply
Sunil

Hi Sunil,
IN CUNI Transaction Field Decimal Places is for displaying the decimals,there is a decimal place Rounding off field below,there try to maintain 3 decimals and check whether it is working.
One more thing is Unit EA will be used always as non decimal unit,But i dont know in your buisness how for unit EA there is a decimal qty
Edited by: Girish Adaviswamy on Mar 2, 2010 10:59 AM

Unit to Be Inspected Tab during Inspection of Production Order

Similar Messages

Maybe you are looking for