Unity 5 with MS Exchange 2007 and Windows Server 2003 Ent w/ SP2

Hello,
We have Unity 5 with Exchange 2007 SP1 on Windows 2003 SP1 Enterprise server.  We want to upgrade Exchange to SP2 or SP3 but I could not find enough information, may not have looked in right places.
Does anyone have Unity with Exchange 2007 with SP2 or SP3?  has anyone experienced issues with such upgrade?
Thanks,
Paresh.

Paresh,
Here's what you need:
Recommended Service Packs—Message Store
Revised October 25, 2010
•Exchange 2010 Service Pack 1
•Exchange 2007 Service Pack 3
For support information, refer to the "Support Policy for Microsoft Service Packs and Updates" section of Supported Hardware and Software, and Support Policies for Cisco Unity Release 5.x at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html.
I pulled this straight from a Cisco document so you could be sure that you are moving to the latest recommended SP for Exchange which is SP3.  I have clients running this SP without issue.
Hailey
Please rate helpful posts!

Similar Messages

  • Which VMware support Windows 7 as Host and Windows Server 2003 as Guest OS

    Folks,
    Hello. I need to install PeopleSoft PIA in Windows Server 2003.
    Because my laptop is preinstalled Windows 7 Home Premium Editon and cannot dual boot multiple Operating systems. I have to install VMware in Host Windows 7 and then install Windows Server 2003 as Guest OS for PIA.
    I have installed VMware Server 2.0.2 into Host Windows 7 and Windows Server 2003 as Guest OS. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333/ui cannot display any more.
    I have found that Windows 7 is not a supported Host Operating System for VMware Server 2 and strange thing might happen anytime. I found that "VMware Player 3" is fully supported Windows 7 as Host OS but is not supported Windows Server 2003 as Guest OS.
    Does any folks know which VMware product support Windows 7 as Host OS and Windows Server 2003 as Guest OS ?
    Many thanks in advance.

    Hi,
    Based on my research, I would like to suggest the following:
    1.   
    Ensure the printer is compatible with Windows 7 and Windows Server 2003 and the drivers are up-to-date.
    2.   
    Try the following method:
    Printers that use ports that do not begin with COM, LPT,
    or USB are not redirected in a remote desktop or a terminal services session
    Hope this helps. Thanks.
    Regards,
    Nicholas Li - MSFT
    That doesn't apply to Windows 7 Machines. I'm having the same problem as Acer_, I have a RDP Session from a Windows 7 Machine to a Windows XP machine and the local printer was available a few days ago but isn't anymore. The drivers are installed on both PC's
    and are compatible with Windows 7.

  • Cucm 9.1.2 and Active Directory(Windows Server 2003 Standart Edition SP2)

      Hello!
     Can CUCM 9.1.2 support an integration with Active Directory(Windows Server 2003 Standart Edition SP2)? How do I have to write down LDAP Manager Distinguished Name? I can find supporting only Active Directory 2003 in documentations without reference to Operation System.

    Yes, it is possible.
    Check this how-to if you have any doubts about the process.
    http://blog.ipexpert.com/2010/04/28/cucm-and-active-directory-integration/
    http://www.markholloway.com/blog/?p=1189

  • Getting UConn 8.5 to work with both Exchange 2007 and 2010

    According to the document below, I should be able to set up one Unified Messaging service to access mailboxes on both Exchange 2010 and Exchange 2007 servers.  I setup my service to point to 2010 CAS servers and I can access 2010 mailboxes, but testing 2007 mailboxes comes up with an http 200 error.  If I setup the CAS server as 2007, I can access 2007 mailboxes, but get an error on 2010 mailboxes.  This will be a real pain if I can't do this with one service.  I don't want to have to keep Unity Connection updated as users get moved from 2007 to 2010!  Anyoe know how to do this?
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html#wp1198171        

    I got this to work!  My Unified Messaging Service was originally setup to Specify an Exchange Server.  That is where I had put the  DNS name of the  CAS server (and that DNS entry pointed to several CAS servers).  I changed the Service to Search for Exchange Servers instead and used that same DNS name in the Active Directory DNS Domain Name.  When I do the test of this service, it tells me it Failed to locate a Domain Controller via DNS, but that is just informational.  It also says it successfully connected to the Exchange CAS server with the autodiscover.xml.  Now my mailboxes on both Exchange 2007 and 2010 are able to receive voicemail messages with this one Service configured.

  • Problems with the shared files of Windows Server 2003 and Mac

    I have some Mac computers in the domain of my LAN Network, and when I share a folder in Windows Server 2003 sometimes the Mac can not see and sometimes yes, but lasts a long time so that they can view folders. I have installed the protocol Apple Talk on the server and File Server and in the Domain Server.
    The folders when users have no security users or groups are immediately with a connection AFP, but if they have not already created security can be displayed with a connection AFP, but if you can visualize a connection with SMB, but I can not work with Quark 6.0 Pro files.
    What can I do to solve this problem.
    Asalomon

    The newer printers:
    canon irc3100
    canon ir5020-i have working on osx side, not in classic
    Older printers:
    hp laserjet 5m-2 of these
    hp 2200
    hp laserjet 5si-2 of these
    hp laserjet 4100
    These are installed on windows 2003 with mac print services running. I need to know what option i should use in osx when installing these network printers on these macs. When i go to printers folder, i chose windows printing then it prompts for the ppd file. I found it for the ir5020 but not the ir3100. I really need to test the hp laserjets in osx too. Ill post up when i test those. But that one canon (ir3100) is bothering me. They are roughly the same age and the drivers on the site don't seem to work.

  • How to setup ftp with dreamweaver and windows server 2003

    Does anyone know if there is a tutorial/article on settinp up Dreamweaver cs3 to use Windows server 2003 as an FTP server...
    any assistance would be greatly appreciated...

    I was able to figure out how to setup the ftp connection, connect to my home server, however,whenever i tried to upload the contents of my website to my server, nothing gets uploaded to the site. I tried putting one page at a time, nothing. tried everything, and still no joy. I can see everything on my local server which is a XAMP package, but nothing on my remote server. Do i maybe need to maybe have a WAMP or XAMP on the Windows Server 2003 or that should not matter. This is new to me so i am learning as i go along.
    Another thing, i was able to create a subfolder in my c:\www.ftproot folder, i can see that folder on my local machine, i'm just not seeing the files in that folder when i do my 'put' with my files.

  • Flex and Windows Server 2003 and MSSQL

    Hi everyone,
    I tried to connect to MSSQL using PHP. I did not get any
    error message but the only problem is when I try to test the
    problem, I get this error message. Everything works fine on my
    local computer "developer", but when I try to program and test on
    my Windows Server 2003, I get this error message:
    ReferenceError: Error #1069: Property loginsuccess not found
    on String and there is no default value.
    at index/::checkLogin()
    at index/__login_user_result()
    at
    flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.rpc.http.mxml::HTTPService/
    http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
    at mx.rpc::AbstractInvoker/
    http://www.adobe.com/2006/flex/mx/internal::resultHandler()
    at mx.rpc::Responder/result()
    at mx.rpc::AsyncRequest/acknowledge()
    at ::DirectHTTPMessageResponder/completeHandler()
    at
    flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
    Can someone please help me, I really need to figure this out
    for my company.

    a string value is being read checkLogin() when its expecting
    an object with property loginsuccess.
    maybe its a typo or something in your code.
    for example you may have place:
    var.loginsuccess == "loginsuccess";
    in which it should be:
    var == "loginsuccess";

  • Tiger 10.4.4 or 5 and Windows Server 2003 Services For Macintosh unstable??

    We are running these tested Mac clients here:
    macMini 1.5Ghz 10.4.5
    G4 Quicksilver 800Mhz 10.4.4
    G4 Dual Mirror PowerMac 10.4.4
    They mount volumes on these servers:
    Dell Windows Server 2000 (SFM)
    Dell Windows Server 2003 (SFM)
    Xserve G4 OS 10.3.9 Server
    Macs sleep settings are this:
    Computer sleep=1 hour
    Display sleep=1 hour
    Hard drive=sleep
    Symptom:
    When the Mac goes to sleep, the 2 Windows Mac File servers volumes are
    disconnected. Upon wake, the error message stating they were disconnected are waiting.
    The Xserve volume is untouched. This should not be a problem
    since the Windows servers are running Appletalk via IP not
    native Appletalk protocol.
    Comments:
    Might be related to the lookupd bug in Tiger? http://www.macintouch.com/readerreports/macosx1042/topic3108.html
    Here’s the system log from the macMini: (13:47 is when I woke it and manually mounted the volumes)
    Feb 23 09:37:22 M00XXX /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer: ***********************************
    Feb 23 13:14:13 M00XXX kernel[0]: AFPSleepWakeHandler: going to sleep
    Feb 23 13:14:13 M00XXX kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending regular sleep
    Feb 23 13:14:13 M00XXX kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending regular sleep
    Feb 23 13:14:24 M00XXX configd[32]: AppleTalk shutdown
    Feb 23 13:14:25 M00XXX configd[32]: AppleTalk shutdown complete
    Feb 23 13:14:28 M00XXX launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[88]: exited abnormally: Hangup
    Feb 23 13:14:28 M00XXX configd[32]: posting notification com.apple.system.config.network_change
    Feb 23 13:47:06 M00XXX kernel[0]: System Sleep
    Feb 23 13:47:06 M00XXX kernel[0]: System Wake
    Feb 23 13:47:06 M00XXX kernel[0]: Wake event 0020
    Feb 23 13:47:08 M00XXX kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
    Feb 23 13:47:08 M00XXX kernel[0]: USB caused wake event (OHCI)
    Feb 23 13:47:08 M00XXX configd[32]: setting hostname to "M00XXX.local"
    Feb 23 13:47:08 M00XXX configd[32]: AppleTalk startup
    Feb 23 13:47:10 M00XXX kernel[0]: AFPSleepWakeHandler: waking up
    Feb 23 13:47:11 M00XXX configd[32]: AppleTalk startup complete
    Feb 23 13:47:12 M00XXX configd[32]: posting notification com.apple.system.config.network_change
    Feb 23 13:47:12 M00XXX lookupd[7515]: lookupd (version 369.2) starting - Thu Feb 23 13:47:12 2006
    Feb 23 13:47:12 M00XXX configd[32]: setting hostname to "m00xxx.secret.com"
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Invalid reconn token length 0 /Volumes/VOL1
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: AFP Version 4 does not support reconnect /Volumes/VOL1
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Reconnect not allowed /Volumes/VOL1
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/VOL1
    Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 received VQ_DEAD event (32)
    Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/VOL1', from 'afp_3Xs1VX4aumPi3flxDN2GLoYD-1.2c000009', dead
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/VOL1, flags 524288, pid 39
    Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/VOL2', from 'afp_3Xs1VX4aumPi3flxDN2GLoYD-2.2c00000a', dead
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/VOL2, flags 524288, pid 39
    Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 found 2 filesystem(s) with problem(s)
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Invalid reconn token length 0 /Volumes/Asura_Queues
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: AFP Version 4 does not support reconnect /Volumes/Asura_Queues
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Reconnect not allowed /Volumes/Asura_Queues
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/Asura_Queues
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Asura_Queues, flags 524288, pid 39
    Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/Asura_Queues', from 'afp_3QgJ7Z2s2fVR2flF2I2ZlbNQ-1.2c00000b', dead
    Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 received unknown event (48)
    Feb 23 13:49:54 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/Asura_Queues, pid 7519
    Feb 23 13:50:13 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/VOL1, pid 7520
    Feb 23 13:50:13 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/VOL2, pid 7520

    My SMB share get disconnected while my Powerbook was still running.
    Errors in system.log:
    May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 received VQ_DEAD event (32)
    May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 type 'smbfs', mounted on '/Volumes/backup', from '//HALO;CYONG@PEANUTS/BACKUP', dead
    May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 found 1 filesystem(s) with problem(s)
    Anyone else having the same problem?

  • Crystal Reports 9 and Windows Server 2003 sp1/sp2

    Post Author: jnribeyrol
    CA Forum: General
    Hello,
    due to security updates in my company, we have to upgrade from Windows Server 2003 to sp1 or sp2.
    I haven't been able in the support to find out if there was any problem with Report Access Server on these SPs.
    Can somebody help me.
    regards

    CR XI is past it's end of life. You can upgrade to CR XI R2 for free.
    Go to: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
    Typically this is due to DEP, search forums for more info on how to configure it as well as your Anti-virus and/or Firewall may be stopping CR from running. You also need full Admin rights to install all components.
    Thank you
    Don

  • Acrobat 8 Professional and Windows Server 2003 R2 Issue

    Hi
    Our customers using Adobe Acrobat 8 Professional on Windows server 2003 R2 SP2. It works some period of time but then application stops working with this error and cannot start anymore:
    Faulting application Acrobat.exe, version 8.1.0.137, faulting module Checkers.api, version 8.1.0.137, fault address 0x000021a2.
    What can be the problem? There is nothing in the knowledgebase.
    Regards,
    Jelena

    Hello jordixip,
    You can connect your Mac to Terminal Services using Remote Desktop Connection Client . You need a license, the client software, and turning on the appropriate bits on the server. It is in Micro$oft-ese, but the overview is here.
    Good Luck!
    Zubin
    iMac G4   Mac OS X (10.3.9)   Mac OS 9.2 & earlier, Win2k Pro & Server

  • Officejet 8600 Pro and Windows Server 2003 (32 bit)

    The company I am consulting for purchased three 8600 Pro printers to replace three older and non-working printers. They are still using XP Pro on their workstations and running Windows Server 2003 (32 bit version) on a file server and data server. All of the workstations have the drivers for the 8600 installed and are printing with no problems through the network. I checked the driver page on HP's site and there are no drivers listed for the 32 bit version of the server OS, only the 64 bit version. I need to install the printer drivers on these servers to be able to print reports without having to purchase another printer. Has anyone found a workaround to this problem or do I have to install one of the older printers in order to print and fax from the servers? I really can't shut down these servers in order to reinstall the 64 bit version of the OS.

    Hi,
    Install the software using the command prompt, the software do supported on Windows Server 2003 but its installation process is different.
    Follow these steps to install the printer on the server:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03351547&lc=en&product=4323659&tmp...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • PSUS4 and Windows 7 and Windows XP and Windows Server 2003

    I have a small domain network with Windows Server 2003 , Windows 7 desktop, Windows XP desktop.  I have an HP LaserJet P3005 printer.   I need to be able to print to the HP printer from all of the computers (server, Win 7 and win XP).    I have a PSUS4 print server. Is there a way to setup the PSUS4 so that my server, Win 7 and Win XP computers could print to the HP printer?   For example, If I setup the Print Server on the XP computer with TCP/IP port, could I share it to the server and Windows 7 computers?

    Do you have any router or switch?
    Or all the computers are connected to windows server through a switch?
    PSUS4 must be connected to the router or the DHCP server so that it will get IP address and all the computers will be able to print.

  • Cold fusion 8 and Windows Server 2003 Administrator Login

    I cannot seem to login to my coldfusion (trial version)
    administrator login after installed successfully on my Windows
    Server 2003 with Web Edition Service Pack 2.
    It tries to go here which is correct
    http://127.0.0.1/CFIDE/administrator/index.cfm
    But I get
    Bad Request (Invalid Hostname)
    I attempted to go through IIS through default Web Sites and
    browsed over to
    http://192.168.10.19/CFIDE/administrator/index.cfm
    and I now get a "The page cannot be found" display message.
    Is there anything special I need to do, perhaps in Web
    Service Extentions in IIS or something since I don't see
    "Coldfusion" mentioned anywhere, and I can't seem to find any clear
    instructions on the Adobe site.
    Please help, thanks.

    You should
    configure
    IIS for Coldfusion. Pay particular attention to the section "To
    verify your IIS configuration".

  • AFP and Windows Server 2003 (SP2)

    Hello,
    I have a problem when i connect my MAC with Windows Server 2003 by a AFP connection the connection drops after +/- 10 min. I need this AFP connection because i work with a OMNIS database that locks when i use a SMB connection.
    Can somebody tell me why the connection drops after a while ?
    Thanks already,
    Marco

    Hi Karen
    Unfortunately, re-posting to a different forum category
    doesn't help. Almost all of us here are already watching all the
    categories. If an answer is known, we normally pounce on it to try
    and help. So your situation is probably pretty unique and eluding
    us.
    Please direct any replies to this question to where it was
    originally asked by
    clicking
    here.
    Cheers... Rick

  • Windows server 2012 as primary DC and DNS server and windows server 2003 as secondary DC and DNS

    Migration from windows server 2003 AD DC and DNS server to windows server 2012 R2,
    Cannot I set up Windows server 2012 R2 as primary DC and DNS  , windows server 2003 as secondary DC and DNS ? (for backup server when server 2012 fail, user can continue to login and access internet services)

    You can mix both as long as your Forest and Domain Functional level are Windows Server 2003. However, I would like to bring your attention to this blog about known problems when mixing DCs with Windows Server 2003 and 2012 R2 OS:
    http://blogs.technet.com/b/askds/archive/2014/07/23/it-turns-out-that-weird-things-can-happen-when-you-mix-windows-server-2003-and-windows-server-2012-r2-domain-controllers.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

Maybe you are looking for