Unknown error while updating module use!

I restarted XE with "/etc/init.d/oracle-xe stop /etc/init.d/oracle-xe start" and then see this error message in the terminal console. Every serveral minutes, the error "Unknown error while updating module use!" is echoed.
Any advice?

Look for the alert_xe.log file, maybe you'll find some additional information there if that message is related to your XE instance.
C.

Similar Messages

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. Any suggestions please?

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
Or any other suggestions please? Thanks

As pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.

HT201210 unknown error while updating..

Having unknown error on update.. and not able 2 Restore..
Please help .

That indicates a probable hardware failure. Try it several more times. If you can, try it using a different computer and cable.
If it still fails with that error, make an appointment at the genius bar. It will need to be replaced. It should still be under warranty.

Error while updating database using jdbc receiver adapter

Hi All,
I am trying to update a single record using jdbc receiver adapter.
This is my the message that is getting created..
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Data xmlns:ns0="urn:Test">
- <STATEMENT>
- <TABLENAME ACTION="UPDATE_INSERT">
<TABLE>ORDERS</TABLE>
- <ACCESS>
<OrderID>99999</OrderID>
<CustomerID>VICTE</CustomerID>
<EmployeeID>3</EmployeeID>
<ShipAddress>VICTE</ShipAddress>
</ACCESS>
- <KEY>
<OrderID compareOperation="EQ">99999</OrderID>
<ShipAddress compareOperation="EQ">VICTE</ShipAddress>
</KEY>
</TABLENAME>
</STATEMENT>
</ns0:Data>
But in Adapter Monitoring i am getting the following error..
<i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ORDERS' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near 'VICTE'.</i>
Regards,
Rahul

Rahul,
> In this case i believe the interface has to be synch.
> So what will the response message type be like..
Not necessary. UPDATE can be asynch as well.
Can you turn the trace on like pointed by Michal and then you can see the Query in the Audit Log of the adapter montioring. Try to execute the same query from your DB Client like TOAD and see what is the Syntax error you are getiing.!
The problem looks like some field has some dataype / column name mismatch.
Regards
Bhavesh

Error while updating data using session and call transaction method

Hi all,
    i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
   SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
please tell whether the problem lies and solution for that.
                                   thanks and regards.

hi,
check your recording.check whether u saved your material no in recording or not.
once again record the transacton mm01.
       MATNR LIKE RMMG1-MATNR,
       MBRSH LIKE RMMG1-MBRSH,
       MTART LIKE RMMG1-MTART,
       MAKTX LIKE MAKT-MAKTX,
       MEINS LIKE MARA-MEINS,
       MATKL LIKE MARA-MATKL,
       BISMT LIKE MARA-BISMT,
       EXTWG LIKE MARA-EXTWG,
these are the fields which u have to take in internal table.
this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
SUDHU-6     R     ROH     MATSUDHU     "     001     7890     AA
i did the same.but i didn't get any error.

Error while updating infotype using HINUINFO_UPDATE

Hi All,
While executing the program 'HINUINFO_UPDATE'
i am getting an error 'No object identification permitted for infotype 0582, subtype LTA'.
After the approval for LTA claim is done in ESS i have executed the program 'HINUINFO_UPDATE' to update he infotypes 15 and 582. Infotype 15 is getting created but while creating the infotype 582 system gives the above error message.
In the detailed error log system gives the following message.
"You attempted to access a data record with the object identification 1. However, according to the Customizing settings, object identifications cannot be used for subtype LTA of infotype 0582".
Helpful answers will be rewarded .

Solved by SAP

Error while updating Task using pa_project_pub.update_project API

Hi All,
I am using AMG APIs "pa_project_pub.update_project" for Task dates update . I am getting the API Error message as : "For a shared structure or a Workplan structure, all tasks in the structure should be passed in correct hierarchy."
Even though I am passing the Task information in the task_in_tbl_type in correct order (Ex. For extending dates, Top Task first followed by Sub Task and vice-versa for the shortenings the dates).
Still I am getting the Error. Request you to help me in resolving the error.
Thanks,
Atul

Hi All,
Thank you All.
Actualy I was watching the thread and got no Reply.this enable me to search more for the cause and eventually for the solution.
The Error "The flex field values you have entered are invalid" was because of DFF values only. I found this solution from API code only. It takes me to PA_PROJECTS_PVT where I Found the Error Code and then to flex field validation and then to Task utility Package.
Actually when you are not passing any value for Attributes, It will take the Old values only. and If the old values fails to Validate, this issue may arise. Same was the cause in this case. For An attribute the Value Set was "Standard Date" and it was accepting "DD-MON-RRRR" from Front End, but keeping "DD-MON-RRRR HH:MI:SS" as a value in the Attribute. For Eg. 12-DEC-2012 will be stored as 12-DEC-2012 00:00:00. It was there for almost all the Tasks.
And when it was passed internally to API, It was causing the Error that Value enterted are Invalid.
I came to know only after running the Desc Flex Field Validate API, which PA_PROJECTS_PVT was using.
Got the Solution and feel like sharing with you all.
Thanks,
Amit

Error While updating Process form data Using Scheduler

Hi All,
I am trying to update Process form data (ex : lastname) using a scheduled task Code. I am getting Error while updating Field.
Code :
HashMap<String, String> map = new HashMap<String, String>();
map.put("UD_EBS_PF_LASTNAME", "lastname");
formintf.setProcessFormData(instancekey, map); //I AM GETTING AT THIS LINE
Saying
Thor.API.Exceptions.tcAPIException: The following required fields have not been given values:EBS IT Resource : The following required fields have not been given values:EBS IT Resource
    at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl_1036_WLStub.setProcessFormDatax(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
    at $Proxy2.setProcessFormDatax(Unknown Source)
    at Thor.API.Operations.tcFormInstanceOperationsIntfDelegate.setProcessFormData(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.security.Security.runAs(Security.java:41)
    at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
    at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
    at $Proxy3.setProcessFormData(Unknown Source)
    at com.wyndham.tasks.AssignRandomPasswordToAllUsersSchedulerTest.execute(AssignRandomPasswordToAllUsersSchedulerTest.java:182)
    at com.wyndham.tasks.AssignRandomPasswordToAllUsersSchedulerTest.main(AssignRandomPasswordToAllUsersSchedulerTest.java:63)
Caused by: Thor.API.Exceptions.tcAPIException: The following required fields have not been given values:EBS IT Resource : The following required fields have not been given values:EBS IT Resource
    at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:761)
    at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:426)
    at Thor.API.Operations.tcFormInstanceOperationsIntfEJB.setProcessFormDatax(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

Is that possible there was the field ZDATE in your form interface/ context and now it is not? I guess some source has changed so the field in the form (binding to the not existing field) cannot be processed. Otto

I get an error while changing modules pop up when opening Lr. There is no import button to use and if I try to load the default catalog I get the error message again essentially making Lr completely unusable for me! please help

When launching Lr i get the initial screen to come up followed by an "error while changing modules" pop up. I have uninstalled and re-downloaded, followed all the suggested trouble shooting fixes and still nothing. When the app starts it has the basic info boxes but without any options in them (i.e. no import button or any buttons at all for that matter).All my other creative cloud apps seem to be working fine but Lr won't. Please help

Ah, see, you said you had done it differently before.
> and I tried to add a toolbox button by navigating to AcroPDF.dll.
You'll need to reinstall Reader if the libraries aren't registered. You can't register them manually.
Perhaps if you posted some of your code (where it creates the objects, etc.) we might be able to give you some more advice. You're sure you aren't trying to use anything outside of the AxAcroPDFLib.AxAcroPDF class?

Error while migrating users using CSSImportExportUtility

Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?

I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz

Error while updating pricing item

Hi All,
I have an issue to ask, the problem is this issue not happen every time, and sometimes it can solved it self.
We are using SRM 5.0
SRM_SERVER 550 0008 SAPKIBKT08 SRM_SERVER
SAP_AP 700 0008 SAPKNA700 SAP Application Platform
Its about Error while updating pricing item 49ABA6C4998216D9E1000000AC103B65 (document 49ABA6CE998216D9E1000000AC103B65) which i found in SLG1 and SM53.
When this issue occured, all transaction cannot be process, like : transfer ext requirement from R/3 to SRM --> failed , then when generate PO from accepted quotation , the PO net price will be zero.
All the error is the same, error has occured in pricing.
I already check using program
RSVMCRT_HEALTH_CHECK and BBP_CND_CUSTOMIZING_CHECK , IPC is running and all java enviroment message status = green, but if i simulate using a product, it will show error in pricing.
Can you please help to advise if any of you ever facing the same error, your respond will highly appreciated.
Regards,
w1n

Hi,
I think buffer has old condition.
Please run the Function Module IPC_DET_CLEAR_CUST_BUFFER.
OR reset the VMC -> Reset in SM52.
Regards,
Masa

Kextcache error while updating /Volumes/Seagate CCC

Hi, my external seagate drive (2Tb partitioned into 2 * 1Tb's I've been using for Carbon Copy Cloner has a problem with kextcache, I will not pretend to know what kextcache is but the errors I am getting relate to an invalid signature, it tries 26 times before giving up.
I expect this explains why the drive is not bootable, any suggestioins as to how to fix the problem, can it be fixed?
Regards
Ian
08/02/2014 22:11:31.000 kernel[0]: USBMSC Identifier (non-unique): 0x00000000 0xbc2 0x3320 0x100, 3
08/02/2014 22:11:32.000 kernel[0]: CoreStorage: fsck_cs has finished for group "E4E85C17-019A-41E7-AC85-6F3FFEAB9ABF" with status 0x00
08/02/2014 22:11:32.508 com.apple.kextd[12]: LVG changed
08/02/2014 22:11:32.000 kernel[0]: CoreStorageFamily::unlockVEKs() failed to unwrap the vek, status = e00002bc
08/02/2014 22:11:32.626 com.apple.kextd[12]: LVG changed
08/02/2014 22:11:32.000 kernel[0]: hfs: mounted Seagate MAC on device disk5s4
08/02/2014 22:11:33.000 kernel[0]: hfs: mounted Seagate CCC on device disk6
08/02/2014 22:11:33.503 diskmanagementd[2676]: mount blocked by dissenter PID=0 (unknown) status=0xf8da0002 log=kDAReturnBusy message=(null)
08/02/2014 22:11:34.587 com.apple.kextcache[2960]: rebuilding /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
08/02/2014 22:11:38.942 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/System.kext/PlugIns/Unsupported.kext"
08/02/2014 22:11:38.944 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/System.kext/PlugIns/Private.kext"
08/02/2014 22:11:38.946 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/System.kext/PlugIns/Mach.kext"
08/02/2014 22:11:38.947 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/System.kext/PlugIns/MACFramework.kext"
08/02/2014 22:11:38.949 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/System.kext/PlugIns/Libkern.kext"
08/02/2014 22:11:38.958 com.apple.kextcache[2963]: WARNING - Invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext "/Volumes/Seagate CCC/System/Library/Extensions/System.kext/PlugIns/IOSystemManagement.kext"
08/02/2014 22:11:38.966 com.apple.kextcache[2963]: WARNING - Invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext "/Volumes/Seagate CCC/System/Library/Extensions/System.kext/PlugIns/IONVRAMFamily.kext"
08/02/2014 22:11:38.967 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/System.kext/PlugIns/IOKit.kext"
08/02/2014 22:11:38.969 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/System.kext/PlugIns/BSDKernel.kext"
08/02/2014 22:11:38.978 com.apple.kextcache[2963]: WARNING - Invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext "/Volumes/Seagate CCC/System/Library/Extensions/System.kext/PlugIns/ApplePlatformFamily.kext"
08/02/2014 22:11:38.990 com.apple.kextcache[2963]: WARNING - Invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext "/Volumes/Seagate CCC/System/Library/Extensions/System.kext/PlugIns/AppleNMI.kext"
08/02/2014 22:11:38.998 com.apple.kextcache[2963]: WARNING - Invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext "/Volumes/Seagate CCC/System/Library/Extensions/System.kext"
08/02/2014 22:11:39.118 com.apple.kextcache[2963]: kext com.jmicron.JMicronATA 101069000 is in exception list, allowing to load
08/02/2014 22:11:39.313 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBUserClient .kext"
08/02/2014 22:11:39.410 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBHIDDriver. kext"
08/02/2014 22:11:39.442 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBCompositeD river.kext"
08/02/2014 22:11:39.483 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBXHCI.ke xt"
08/02/2014 22:11:39.628 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBUHCI.ke xt"
08/02/2014 22:11:39.658 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBOHCI.ke xt"
08/02/2014 22:11:39.689 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBMergeNu b.kext"
08/02/2014 22:11:39.713 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBHub.kex t"
08/02/2014 22:11:39.766 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBEHCI.ke xt"
08/02/2014 22:11:39.767 com.apple.kextcache[2963]: WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/Volumes/Seagate CCC/System/Library/Extensions/IOUSBFamily.kext"
08/02/2014 22:11:41.127 com.apple.kextcache[2963]: kext com.ATTO.driver.ATTOExpressSASRAID 307029000 is in exception list, allowing to load
08/02/2014 22:11:41.144 com.apple.kextcache[2963]: kext com.ATTO.driver.ATTOExpressSASHBA3 100059000 is in exception list, allowing to load
08/02/2014 22:11:41.161 com.apple.kextcache[2963]: kext com.ATTO.driver.ATTOExpressSASHBA 200009000 is in exception list, allowing to load
08/02/2014 22:11:41.173 com.apple.kextcache[2963]: kext com.ATTO.driver.ATTOExpressPCIUl4 404029000 is in exception list, allowing to load
08/02/2014 22:11:41.200 com.apple.kextcache[2963]: kext com.ATTO.driver.ATTOCelerityFC 304089000 is in exception list, allowing to load
08/02/2014 22:11:43.037 com.apple.kextcache[2964]: /Volumes/Seagate CCC locked; waiting for lock.
08/02/2014 22:11:43.253 com.apple.kextcache[2963]: kext com.Accusys.driver.Acxxx 300029000 is in exception list, allowing to load
08/02/2014 22:11:46.534 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The super class vtable 'vtable for IOService' for vtable 'vtable for IOMediaBSDClient' is out of date. Make sure your kext has been built against the correct headers.
08/02/2014 22:11:46.534 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The super class vtable 'vtable for IOService' for vtable 'vtable for IOBlockStorageDevice' is out of date. Make sure your kext has been built against the correct headers.
08/02/2014 22:11:46.534 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The super class vtable 'vtable for IOService' for vtable 'vtable for IOStorage' is out of date. Make sure your kext has been built against the correct headers.
08/02/2014 22:11:46.534 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The super class vtable 'vtable for IOService' for vtable 'vtable for IOMediaBSDClient' is out of date. Make sure your kext has been built against the correct headers.
08/02/2014 22:11:46.534 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The super class vtable 'vtable for IOService' for vtable 'vtable for IOBlockStorageDevice' is out of date. Make sure your kext has been built against the correct headers.
08/02/2014 22:11:46.534 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The super class vtable 'vtable for IOService' for vtable 'vtable for IOStorage' is out of date. Make sure your kext has been built against the correct headers.
08/02/2014 22:11:46.534 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The vtable for IOFilterScheme was not patched because its parent, the vtable for IOStorage, was not patchable.
08/02/2014 22:11:46.534 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The vtable for IOPartitionScheme was not patched because its parent, the vtable for IOStorage, was not patchable.
08/02/2014 22:11:46.534 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The vtable for IOAppleLabelScheme was not patched because its parent, the vtable for IOFilterScheme, was not patchable.
08/02/2014 22:11:46.535 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The vtable for IOBlockStorageDriver was not patched because its parent, the vtable for IOStorage, was not patchable.
08/02/2014 22:11:46.535 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The vtable for IOGUIDPartitionScheme was not patched because its parent, the vtable for IOPartitionScheme, was not patchable.
08/02/2014 22:11:46.535 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The vtable for IOApplePartitionScheme was not patched because its parent, the vtable for IOPartitionScheme, was not patchable.
08/02/2014 22:11:46.535 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The vtable for IOFDiskPartitionScheme was not patched because its parent, the vtable for IOPartitionScheme, was not patchable.
08/02/2014 22:11:46.535 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOStorageFamily]: The vtable for IOMedia was not patched because its parent, the vtable for IOStorage, was not patchable.
08/02/2014 22:11:46.536 com.apple.kextcache[2963]: Link failed (error code 5).
08/02/2014 22:11:46.536 com.apple.kextcache[2963]: Prelink failed for com.apple.iokit.IOStorageFamily; omitting from prelinked kernel.
08/02/2014 22:11:46.536 com.apple.kextcache[2963]: Can't use IOStorageFamily.kext - not linked.
08/02/2014 22:11:46.536 com.apple.kextcache[2963]: Prelink failed for com.softraid.driver.SoftRAID; omitting from prelinked kernel.
08/02/2014 22:11:46.564 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOSCSIArchitectureModelFamily]: The super class vtable 'vtable for IOService' for vtable 'vtable for IOSCSIProtocolInterface' is out of date. Make sure your kext has been built against the correct headers.
08/02/2014 22:11:46.564 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOSCSIArchitectureModelFamily]: The super class vtable 'vtable for IOService' for vtable 'vtable for AppleSCSISubsystemGlobals' is out of date. Make sure your kext has been built against the correct headers.
08/02/2014 22:11:46.564 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOSCSIArchitectureModelFamily]: The super class vtable 'vtable for IOService' for vtable 'vtable for IOSCSIProtocolInterface' is out of date. Make sure your kext has been built against the correct headers.
08/02/2014 22:11:46.565 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOSCSIArchitectureModelFamily]: The super class vtable 'vtable for IOService' for vtable 'vtable for AppleSCSISubsystemGlobals' is out of date. Make sure your kext has been built against the correct headers.
08/02/2014 22:11:46.565 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOSCSIArchitectureModelFamily]: The vtable for IOSCSITargetDevice was not patched because its parent, the vtable for IOSCSIPrimaryCommandsDevice, was not patchable.
08/02/2014 22:11:46.565 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOSCSIArchitectureModelFamily]: The vtable for IOSCSILogicalUnitNub was not patched because its parent, the vtable for IOSCSIPeripheralDeviceNub, was not patchable.
08/02/2014 22:11:46.565 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOSCSIArchitectureModelFamily]: The vtable for IOSCSIProtocolServices was not patched because its parent, the vtable for IOSCSIProtocolInterface, was not patchable.
08/02/2014 22:11:46.565 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOSCSIArchitectureModelFamily]: The vtable for IOSCSIPeripheralDeviceNub was not patched because its parent, the vtable for IOSCSIProtocolServices, was not patchable.
08/02/2014 22:11:46.565 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOSCSIArchitectureModelFamily]: The vtable for IOSCSIPrimaryCommandsDevice was not patched because its parent, the vtable for IOSCSIProtocolInterface, was not patchable.
08/02/2014 22:11:46.565 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOSCSIArchitectureModelFamily]: The vtable for IOSCSIMultipathedLogicalUnit was not patched because its parent, the vtable for IOSCSIPeripheralDeviceNub, was not patchable.
08/02/2014 22:11:46.565 com.apple.kextcache[2963]: kxld[com.apple.iokit.IOSCSIArchitectureModelFamily]: The vtable for IOSCSIHierarchicalLogicalUnit was not patched because its parent, the vtable for IOSCSIPeripheralDeviceNub, was not patchable.
08/02/2014 22:11:46.566 com.apple.kextcache[2963]: Link failed (error code 5).
08/02/2014 22:11:46.566 com.apple.kextcache[2963]: Prelink failed for com.apple.iokit.IOSCSIArchitectureModelFamily; omitting from prelinked kernel.
08/02/2014 22:11:46.566 com.apple.kextcache[2963]: Can't use IOSCSIArchitectureModelFamily.kext - not linked.
08/02/2014 22:11:46.566 com.apple.kextcache[2963]: Prelink failed for com.apple.iokit.IOSCSIParallelFamily; aborting prelink.
08/02/2014 22:11:46.566 com.apple.kextcache[2963]: Failed to generate prelinked kernel.
08/02/2014 22:11:46.570 com.apple.kextcache[2960]: Child process /usr/sbin/kextcache[2963] exited with status 71.
08/02/2014 22:11:46.571 com.apple.kextcache[2960]: Error 107 rebuilding /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
08/02/2014 22:11:46.571 com.apple.kextd[12]: kextcache error while updating /Volumes/Seagate CCC (error count: 1)
08/02/2014 22:11:46.876 com.apple.kextcache[2964]: Lock acquired; proceeding.
08/02/2014 22:11:46.876 com.apple.kextd[12]: async child pid 2960 exited with status 71
08/02/2014 22:11:46.876 com.apple.kextcache[2964]: rebuilding /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache

Hi,
interesting: I have the same issue, however, I don't have any software from Freecom installed.
Here is my situation, which - to me - is quite bizarre.
Some weeks ago, I installed an SSD as the boot disk, moving my "old" HDD to the Superdrive bay.
This worked quite well. I then upgraded to Mavericks (from ML).
It's tough to say for certain, but my impression is that since I upgraded, things have gone quite awry.
I'm seeing these Error 107 messages from kextcache as well, repeating over and over periodically. What is very odd is this: the cache is trying to update on the HDD! I checked; there is a Library and a System directory in the HHD's root.
I figured I had forgotten to clear those out when I changed the HDD to be a data-only drive, and that Mavericks was using the System directory on the HDD because - well - it was there. So I deleted both the Library and System directories and rebooted.
This fixed Pathfinder's lockup error (after updating), but - much to my surprise - the System directory is back!
All it contains is a Library directory and that only has a Caches directory in it, which - no surprise - contains the com.apple.kext.caches directory. This subtree belongs to root with group wheel, so that should be ok.
So:
1) why on earth is Mavericks putting this directory on the HDD, and not on the SSD which contains the "real" system directory?
2) why am I getting 107 errors?
Here is the relevant part of my log:
Apparently, I'm not the only one, I just found this discussion on what seems to be a similar subject:
https://discussions.apple.com/thread/5490448
Thanks!

Error: SharePoint Workspace encountered an unknown error while attempting to create this list

Hi,
I am using Sharepoint workspace to offline synchronize a document library.
In the workspace, I provided the site name. All but one document library was downloaded.
I selected the document library, which did not get downloaded. I am getting the below message:
SharePoint Workspace encountered an unknown error while attempting to create this list. Ask your site administrator to resolve the issue and then click Resolve Error in the Resolve tab.
If I click on Resolve error, the sharepoint workspace crashes and opens again.
How to fix this?
Thanks

Hi,
For troubleshooting your issue, you can take steps as below:
Running groove.exe /clean from command prompt
Running groove.exe /clean /all from the command prompt
Removing the library from sharepoint workspace and re-adding it
Deleting the users folder from c:\users\username\appdata\local\microsoft\office\groove\user
Running a repair on Office 2010
Uninstalling and reinstalling the Sharepoint Workspace tool from the computer
Verifying all updates are installed
Reference:
https://support.office.com/en-in/article/Resolving-conflicts-and-errors-in-SharePoint-Workspace-70928d16-1cff-4931-b693-f5e346a7bf99?ui=en-US&rs=en-IN&ad=IN#bm1
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error While updating info in the People Form-Additional Personla Details

Hi All,
Iam getting an Error While updating information in the People Form,Additional Personla Details DFF.
Error Like:
APP-PER-289974:There has been an error Processing this person,The error encountered is 'ORA-20001:HZ_STNC_SQL_EXCEP:N,PROC.sync_Person,N,ERROR.ORA-25153:Temporary Tablespace is empty ,N,POO,1265890',which occured in procedure per_htrca_merge_tca_person at step10.
Please contact your support represntative.
Thanks -
Sowmya

Thanks you,
By this Note id:395136.1
Iam unable to find this Set profile 'HZ: Generate Events for DQM Real-Time Synchronization' to No
with this Note id:278422.1
We are unable to find this proifle option : HZ: Data Sharing and Security Enabled profile
we are using applications 11i.
please help to find this Profile option.
But with this note id:ID 395136.1
This is Working.
Query for HZ: DQM Synchronization Method profile. Set the value to Disable.
But iam facing proble while uploding data to DFF ,Error--SQL exception occurred during PL/SQL upload.
Thanks for the Support-
Sowmya.
Edited by: user13419037 on Aug 11, 2011 11:53 PM
Edited by: user13419037 on Aug 12, 2011 12:03 AM
Edited by: user13419037 on Aug 12, 2011 3:45 AM

Error while updating account dim

I get the below error while updating the Outline Account Dim.This error occurs only when updating account dim. It does not happen with other dimensions. So it doesn't seem to be the connection being down. If we recycle the analytics server. But we are not able to find out the actual cause for this issue.
Error message:
Cannot build dimension. Analytic Server Error(1042017): Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again
Additional information
Account is defined as dense dimesion with 1800 level 0 members. We are updating this using rules file.
Potential Number of Data Blocks : 27762609853440
Number of Existing Data Blocks : 2625360
Index Cache: 40960
Data cache : 20480
I appreciate any help in resolving this issue

There is probably something in your dim build source file that Essbase doesn't like and isn't giving you a good error message. Did this dim build work in the past and you recently added something to it?
Try excluding certain columns like member properties and data storage just to see if you can get the members to load. Then slowly bring back in the other columns to see if you find the one that has the problem. Similarly try keeping all the columns but just try loading one record and see if it succeeds, this will help you start to narrow down if it is a load rule or source issue. Other option is to create a new load rule, perhaps there is something wrong with the one you are using.
Unfortunately there is no magic bullet here, you just have to work through small samples to try and isolate what the problem is.

Unknown error while updating module use!

Similar Messages

Maybe you are looking for