Unknown Pop Up Message on 7.0 PLEASE HELP!!
While I was installing iTunes 7.0, a window popped up saying (and I quote):
"1: The InstallScript engine on this machine is older than the version required to run this setup. If available, please install the latest version of ISScript.msi , or contact your support personal for further assistance."
I have no clue what this means or what this ISScript.msi or InstallScript is. PLEASE HELP!!
Sony VAIO Windows XP
While I was installing iTunes 7.0, a window popped up
saying (and I quote):
"1: The InstallScript engine on this machine is older
than the version required to run this setup. If
available, please install the latest version of
ISScript.msi , or contact your support personal for
further assistance."
I have no clue what this means or what this
ISScript.msi or InstallScript is. PLEASE
HELP!!
Sony VAIO
Windows XP
Hi there, I am also having this exact same problem. I have done all the mumbo jumbo about deleting the InstallShield files and installing new ones etc, but the same problem still exists!
I am going berserk! I don't know what to do!
I just can't install iTunes 7 at all which is a big shame, especially since everything else on my PC is working fine.
Please help! Thanks
Similar Messages
-
My iPhone has crashed and i went to iTunes to restore it and after waiting for it to be restored it said "The iPhone could not be restored. An unknown error occurred (2006). Can anybody please help suggest what i should do now?
This error normally appears if you attempted to downgrade or modify your iOS. See here http://support.apple.com/kb/TS3694#error1015
-
I deleted my microsoft office:mac 2011 word from my toolbar. I have Mac OS X version 10.6.8. I tried to reinstall but it won't work. This has never happened before. I get an error message each time. Please help!!!!!!!!!!!!!! I don't have time machine.
By Toolbar, do you mean the Dock? The Translucent bar normally at the bottom of the screen, but sometimes at the right or left side?
If that's what you mean, the Dock is merely a shortcut to what is already inside the Applications folder's Microsoft Office 2011 folder. If you have Word inside your Microsoft Office 2011 folder, you can drag it back to the Dock.
If you deleted the Microsoft Office folder, or it is empty, you'll have to reinstall it.
If you don't have your registration code, you'll have to call Microsoft for a new one. -
ýesterday my iphone 5c screen suddendly shows connect to itune and i try to restore it using itune but halfway i got a message error occured (14). please help me in solving this problem.
what did you learn when you search the internet for iPhone error 14?
-
When attempting to start iTunes, I get the following: "The iTunes library file cannot be saved. An unknown error occurred (-50)." Can someone please help me get this fixed?
Same problem here since latest update. As usual poor support from Apple with no answer or fix for this bug.
-
please i am unable to restore my ipad due to error 3194.The restore process stalls when it gets to the point where the firmwarwe is being updated.error message 3194 comes up.please help me
http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com -
HT5622 when i try to download an apps a message error 1009 appear ,please help me,what i have to do
when i try to download an apps a message error 1009 appear ,please help me,what i have to do
plishing/scam. I would go to Settings>Safari and Clear Cookies. Data and History and not go to that site for a while. Seems like an infected site.
See this previous discussion on same symptom
https://discussions.apple.com/thread/6042028?tstart=0 -
The iphone could not be restored an unknown error occurred 14 ... please help me
the iphone could not be restored an unknown error occurred 14 ... please help me
Hello ahmedhelmy41
That error is typically related to USB issues when trying to update or restore. Check out the article below to troubleshoot the issue further. There are also a few things to try that are quoted down below.
Resolve issues between iTunes and security software
http://support.apple.com/kb/TS3125
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
Regards,
-Norm G. -
I have recently upgraded to ios 5 and it worked fijne in the first 3 weeks. But suddenly i could not send a text to a certain contact, when i sed a text it aways say message send failure.
PLEASE HELP ME!!shegoure wrote:
I have resetted my iphone numerouse times and like its a quick fix..
What happens if i reset my iphone?
Hi, Sorry, have edited my first post to you as I misread your question...
A reset is like a reboot on a computer... You will not lose any Data...
Resetting your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
iPhone Reset
http://support.apple.com/kb/ht1430 -
My husband and I were trying to setup FaceTime and now his cellphone number is on my FaceTime setting instead of mine and I'm receiving his text messages. Can some please help .
On each device, go to Settings > Messages > Send & Receive. Make sure that each device is using separate addresses and phone numbers. If your email address is checked on both devices, Your husband will recieve everything he intends to send to you.
Do the same for FaceTime. -
I get en error message 42408. I have tried several times to activate my account but the same message keeps reappearing. Please help. I cant even sink my iPad or iPhone. Thanks
After searching, found a few answers and tried one last thing-- allowing Safari to accept Cookies. I never use Safari so never changed any settings in it ever. However, I guess an update along the way turned off cookies in it and that was the blockage. Once I allowed Safari to use cookies I was able to redeem the gift card. SO, glad this board is here for these types of questions!!!!
-
Ipod error message when connected. Please help
Windows XP
I have had my 30 gigabyte ipod for almost a year and i've never had any problems with it before. But recently our area wasn't able to get broadband. So i was unable to download the recent ipod and itunes updates. I have done that now.. but i think something has affected my ipod. When i plug it into my computer nothing comes up on my ipod screen and i can continue browsing music etc.. i know this isn't supposed to happen. And on my computer an error message comes up saying "USB device not recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. "
Please help me!Okay. So i'll tell you the steps i have taken. I've uninstalled all the ipod updaters i had on my computer, eg 2006 and 2005.. and i reinstalled the latest version of itunes. I also went to device manager and all that but it only came up in the list at "unknown device" and i uninstalled the driver and tried to reinstall it but it came up saying it was an unknown device again. I tried right clicking on it and going "scan for hardware updates" but it told me the one i have installed is the nearest match. I also tried connecting my ipod to my computer in disc mode which did nothing. But i have discovered my ipod charges when i plug it in.. but the computer freezes on the black dos screen (as it always has for me when i turn the computer on with the ipod plugged in) and the ipod remains charging. but it seems if i plug it in after windows has loaded it's not even recognised.
I'm sorry for making it so long but i really really need help -
I'm still getting all these annoying popups windows, although I followed every solution suggested(safari extensions,block the pop ups) it's really disturbing please help
There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
Toshiba NB205 Error message F3-FF00-0006, Please Help!
I need help. My toshiba NB205 is not working. When I turn it on it goes to a black screen that give me two options Launch start up repair or start normally. If I choose the startup normally it brings me back to the the same screen. If I choose Launch start up repair it goes to a black screen and only my cursor is on there. I tried going into safe mode and doing the recovery but nothing works. It always brings me back to this black screen. I even tried pressing Alt-Ctrl-Del and after trying a bunch of other things it brought me to a black screen and then weird codes came up on the screen like "Realtek RTL8101E etc. PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM. This product is covered by one or more of the following patents, etc." and it says a bunch of other stuff and it keeps repeating it. I read in other forums that Im supposed to get into the BIO but I need step by step directions on how to do that cause when I went into the start up (by pressing F2) I didnt know what to do. Well, after pressing Launch star up repair and I left it for several minutes at the black screen to see if anything will happen and then after a long time a pop up message came and it said Error: F3-FF00-0006. Failed to get the ID of the specified partition. Press ok to turn off the computer. When I pressed ok, it turned off the computer and when I turned it on again i took me to the black screen with the two options Launch start up repair or start normally. Ahhh it's so frustrating and all my school work is on this laptop. Please if you can help me.. please let me know what to do..thanks. Oh, and I don't know what could have caused this problem. Yesterday the computer kept freezing up and it was really slow and once it even shut down for no reason but I could start it up after. But today it's not working properly.
do you have same model computer? Are all the same things occuring with your computer as the op's? If not, then start your own thread and start from the beginning. If much of the OP's issue(s) are the same as your you can always link to this thread if there is a reason to do so.
-
Unexplained Error Message On Export. Please Help.
a message pops up when i try to export a project from fce as a quicktime file, saying "error: out of disk space", while there's still plenty of space on my drive. it all worked perfectly well last night. i'd been exporting projects without any problem for half a year, until this morning, when i encountered this issue. please help. i need to urgently export a project i've just completed to quicktime/idvd. many thanks in advance.
i've just solved the problem. by changing the figure next to "minimum allowable free space on scratch disks".
Maybe you are looking for
-
Creating a debit memo request with reference to an invoice
Hi, An invoice shows wrong MWST value because of incorrect customer tax classification as Tax exempt. I corrected the cust tax classification to "Liable for Tax". Then I tried to create a debit memo request with reference to the incorrect invoice. Th
-
Import and flow the xml text in a indesign document
pls,anyone give me a solution for import and flow the xml text in a document. thanks, screen410099
-
How can I close my iPhoto on my MacBook Air?
I had tried to import my photos to my mac book from my iPod, i tried to stop the import but wasn't patient enough with it so i unplugged my iPod and i checked on it later and my photos weren't there. As a result of my being inpatient i can't close th
-
Resetting the forex revaluation
Dear all, We had implemented SAP r/3 version ECC 5. We had revaluated the forex open line items as on 31.03.2007 through the T-Code of FAGL_FC_VAL. However subsequently we had opened the previous period for posting the entries in foreign currency. He
-
Problem displaying HTML in reports...
Post Author: redwing19 CA Forum: General I'm new to Crystal Reports and I can't get a report to print/display html.I have a column in my database that holds the HTML, and I want the data in this column to be in the detail of the report keeping the HT