Unlock button not working in My Employees service

Hello,
Under My Employees service, when I select an employee and clicks on the unlock button. It gives me an error saying navigation not possible.below is the screenshot for the same -
We have recently activated new business function HCM_ESS_WDA_1. How do I make it work or how do I hide that.
Thanks,
Bhushan

Hi Bhushan
This wiki page should help: it applies to cancel and unlock too
Portal Navigation and Business Function HCM_ESS_WDA_1 - ERP Human Capital Management - SCN Wiki
http://wiki.scn.sap.com/wiki/x/eJc_FQ

Similar Messages

  • Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

    iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

    Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
    Regards.

  • Iphone 4 home button not working, called never fixed, then cracked screen before bringing it back again, will they blame the cracked screen if i bring it back?

    I bought an iPhone 4 less than a year ago, then one day the home button randomly stopped working, I bought the warranty so I decided to call in and see what was wrong with it. The girl said that restoring the phone would correct the problem which it did. But it is only a temporary fix, it happens more often now. So I was meaning to call in soon, but the other day my phone fell out of my pocket IN CASE from a foot height and cracked the screen. I nearly threw up. All the years I have had a phone I have never cracked or broken one, strongest screen my ***. Anyway, if I contact them again now will they fix the home button problem? or will they say that the cracked screen is obviously the cause of the home button not working? which it is not!! I don't care about the screen being cracked its not on the actual screen just on the side so its irrelevant to me. Plus I heard it is outrageosly pricey to replace.

    Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
    Regards.

  • IPod touch 5th gen. Home button stuck and power button not working! Please help!

    I have an iPod 5th Generation and the home button is jammed down! It felt sticky earlier but now it's stuck down. I used it when the home button wasn't working and had to use my notifications to change from app to app (as I didn't know about assistive touch). I turned it off, but now the power button is no longer responsive! The button isn't stuck, but it doesn't work anymore. It was working fine before, but now it won't respond. Please help!

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • TS3694 No sound and ringer button not working. I cannot play music but when I put my Iphone 4 on the dock it plays music. This happens when I updated my phone to IOS 6.1.3..The phone doesnt have any carriers we only used this just like Itouch. Please help

    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.

    Hi there,
    Thanks for reaching out to the community.
    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
    It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
    Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
    Best of luck!

  • I never set a passcode for my iPad but it is locked and I can't get it unlocked.  The "slide to unlock" does not work.  How do I get it unlocked?

    I never set up a passcode for my iPad 2 but it is locked and I can't unlock it.  The "slide to unlock" does not work.  Any suggestions on how to unlock it?

    You have to slide to unlock to bring up the keyboard if a passcode is set. If you can't slide then try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • Sleep Button Not Working on iPhone 5

    Sleep button not working .. Advice on what Else I should do?
    I've already turned it off & turned it on, & rebooted it.
    I've had my phone since October and this is the first time it's done this

    Morning AskVictoria95,
    Thanks for using Apple Support Communities.
    Installing the latest version of iOS may resolve the issue.
    For more information on this, take a look at this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Sleep/Wake button will not lock or unlock iPhone
    To lock the phone, press the Sleep/Wake button. Note: By default, if you don't touch the screen for a minute, iPhone locks automatically.
    To unlock iPhone, press the Home button or the Sleep/Wake button, then slide the slider.
    If either of the above steps don't work, try turning iPhone off and then on again.
    If the iPhone will not power off, reset it.
    Try to lock or unlock the phone.
    Issue not resolved
    http://www.apple.com/support/iphone/contact/
    Best of luck,
    Mario

  • Power button not working

    iPopd touch 4th generation sleep/power button not working.
    Any ideas? how long is warranty?

    The standard warranty is one-year. Yu can purchase, before the one-year is up and additional year. Yu can check your coverage here:
    Apple - Support - Check Your Service and Support Coverage
    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Power button not working with 7.1 update

    Power button not working with 7.1 update

    I take it your phone was still under warranty then?!
    Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
    I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
    I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
    When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
    Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
    I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
    I seriously think Android is calling me...

  • Sleep/Wake button not working, what to do?

    Hello, the sleep/wake button not working, do I need to go to apple store even though I don't have insurance for my phone?

    How old is the phone? You can go to Check Your Service and Support Coverage to find out where you stand warranty wise.
    There is a one year limited warranty, the only way to find out if this repair is covered is to have it checked out. There is no charge in any case for the initial check.

  • My iphone 5 "slide to unlock" does not work

    My iphone 5 "slide to unlock" doe not work and has a camera icon beside it. I also tried to shut it off but the "slide to power off" also does not work. Please suggest solutions to correct it.Thanks

    Reset the device by pressing and holding the home and power buttons for 15-20 seconds until te white Apple logo appears 

  • Ipod gen 4 button not working

    I have an ipod gen 4 now the button on the front no longer works this is the second Ipod gen 4 to do this is there a fix?

    Try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Central button Not working ..... now ? 5 buttons not working !!! What can i do?

    Hello all,
    I bought my blackberry torch in September 2011  and two months ago the center button was problem (bellow the screen)  and not working at all. so I gave it to a company to fix it and told me to round 45 euros to fix it. also told me that it will be ready in the new year because they would have holiday. The man there made a report saying the problem with the center button (only had this problem, I note) and now they brought me back and told me  they can not fix it and they send it to blackberry but  even they could not fix it.  Enable my phone  front of them and did not operate any button of 5 bellow the screen (two to the right of the center button that had problems and two to the left). I told them to send it back to the technician because when I gave to you to fix it only one button was not working and now none of the 5.
    After nearly two months they brought me back and told me ''we can not do anything ....'' So,five buttons not working.
    What can I do in this case????
    Not got it from there yet to see what I can do or what can I say?
    I think I'm right. It is reasonable to I want my phone back with only one button broken as I gave it to them and not with extra 4 buttons not work.
    Sorry for my english, I hope you understand  

    A battery pull does nothing to improve the performance of the battery, it clears your phone's cache of unwanted fragments that have accumulated and this improves the performance of your phone.  I doubt it's as simple as this but it wouldn't be the first time I've heard of a service centre charging money for repairs when a simple battery pull would have done the trick.
    When you get your phone back (working properly or not), I suggest trying a battery pull. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Ipod Touch 1st Gen - Home button not working

    Ipod Touch 1st Gen - Home button not working. Warranty over. I want to replace it with a new one. Grateful if anybody helps me to locate apple's authorized service centers in New Delhi. Also please let me know how much would it cost. Thanks in advance.

    See:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    You can also go to Settings>General>Accessibility and turn on Assistive Touch It adds the Home button to the iPod's screen.
    Yes, if you get it fixes, the iPod will likely be erased. Apple will not repair your old iPod, they exchange it for a refurbished one and do not transfer data.

  • TS2771 my home button not working

    home button not functioning..any tips

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Maybe you are looking for

  • PLS-00435: DML statement without BULK In-BIND cannot be used inside FORALL

    See code below: Have googled the error but not sure how to fix the code. ANy help would be most greatful. DECLARE CURSOR c1 IS SELECT /*+ parallel(tr,8)*/ DISTINCT tr.ACC ACC, tr.MET_ID METID, to_char(max(TRUNC(PKG_LSR_IMPOSITION.convertXXMMDDToDate(

  • How to imort opening balance through template of journal entry

    Dear Experts I want to import opening balance through the date transfer workbench  how can i do this ? is there any way to import opening balance in SAP ? Pls reply ASAP Regards Rajani P. Patel

  • Elements 9 slide show output freezes

    I have Photoshop Elements 9 running on  system 7. It ran fine for a year but now started giving me 3 problems. (1) every time I open my catalog it begins "Updating' which ends in a freeze. (2) I make slide shows with this s/w often and every time I o

  • Multi-user streams replication error in 10gR2

    hi, i am testing multi-user streams replication,using the following sql statement: begin dbms_streams_adm.maintain_schemas( schema_names                     => 'hr,scott,ddup', source_directory_object           => null, destination_directory_object  

  • FM v11 - Can't delete color definitions

    I'm trying to delete a pile of unwanted color definitions, via View > Colors > Definitions. As I recall, one should be able to select a custom color definition, and simply click Delete to remove it from the colors list. I select a color definition (R