"unrendered" in canvas view

Just getting started...
When dragging a part of my .mov file (marked with I and O) to my canvas, I get " unrendered". What am I doing wrong?

You want the sequence (timeline) settings to match the media attributes.
ie - if your media is DV (pal) 25fps, etc then you want the timeline to match it to avoid having to render.
CLick on the timeline and press command(apple)+0 (zero) to bring up sequence settings...
now click a clip on the timeline and press command(apple) + 9 to look at the clip attributes...
the compressor etc should be the same.
understand though, that sometimes you have to mix and match different media formats on the timeline which will result in a nesseccary render, but if you're just working in one format eg-DV, you should set your sequence accordingly.
J

Similar Messages

  • Stacked canvas view placed on the content canvas

    Hi to all,
    i am developed a one form ,i.e placed the stacked canvas view on the content convas.
    i create a two data block's with same table.
    one data block for content canvas and one for stacked canvas.
    in the content canvas i taken two fileds with scroll bar and remaining fields placed on the stacked canvas.
    these stacked canvas view put on the content canvas.it dispalying and
    executed succesfully.
    here i am getting one problem i am displying the 10 records at a time in both canvases.my requirment is placed on the
    cursor on the content canvas particular record scroll down then automatically show the same record details in stacked canvas and
    content canvas scroll bar is changed automatically stacked canvas scroll bar is changed.
    any one help me.........

    {quotei create a two data block's with same table.
    one data block for content canvas and one for stacked canvas.{quote}
    This is not necessary. Just create one data block and then assign the block items to your Content and Stacked canvases. You can display items in a data block on different canvases. By doing this, there is no need to write code to synchronize the records because they are part of the same data block so they will automatically scroll as you navigate through your records.
    Craig...

  • Problem with my Canvas Viewer

    Never had this problem before in over 8 years of Final cut editing...
    No images appear in my canvas viewer when I am editing! The canvas viewer is there, but no images appear when the playback is idol.
    Obviously this is pain in the neck if I want to position images, crop images, layer images on top of each other, etc.
    However, when I press "play", the playback in the canvas viewer works fine. I can watch everything that is in the timeline just fine. But once I stop the player, whichever point I stop at, that image is frozen there, until I press play again. Even when I click a new point on the timeline, the frozen image does not change.
    I just spent half a day clearing out my hard-drive. The Ram disc space says it's okay. And I even ran a disk utility check.
    *** FCP!
    Any suggestions? Anyone ever have this problem?

    Hi - Make sure the Canvas is set to display RGB:
    !http://www.spotsbeforeyoureyes.com/SetCanvastoRGB.jpg!
    Hope this helps.

  • Does FCE have a full monitor canvas view prior to rendering?

    Hi,
    I want to see a large screen view instead of the small canvas view. Can I blow up the canvas view to a large size, like as big as my mac monitor?
    Thanks,
    humbucker

    Hi(Bonjour)!
    Yes you can use the VIEW-->video out-->digital cinema desktop preview command and monitor on your mac screen(sometimes you need to use the refresh video device command to gain access to digital desktop. Displaying +standard def miniDV+ on a mac screen may display bad quality as standard def in small frame dimension.
    Or
    Use your camcorder as an analog interface to monitor via firewire on external TV set or broadcast monitor. Standard def only. And the quality will be there as TV set has less resolution than your mac screen.
    Michel Boissonneault

  • What is canvas view type

    what is canvas view type property in form?

    A canvas is a surface--inside a window container--on which you place the interface items and boilerplate objects that end users interact with when they run the form. By default, any canvas you create at runtime is assigned to the window named WINDOW1. To explicitly associate a canvas to a specfic window, set the canvas' Window property accordingly. While you can create and delete canvases in the Object Navigator, you will use the Layout Editor to accomplish most of your canvas-related tasks.
    There are five types of convases:
    1-Content
    This is default canvas when we create form. It Specifies that the canvas should occupy the entire content area of the window to which it is assigned. Most canvases are content canvases.
    2-Stacked
    Specifies that the canvas should be displayed in its window at the same time as the window's content canvas. Stacked views are usually displayed programmatically and overlay some portion of the content view displayed in the same window
    3-Tab
    Specifies that this canvas will be a container for one or more tab pages.
    4-Vertical Toolbar
    Specifies that the canvas should be displayed as a vertical toolbar under the menu bar of the window. You can define iconic buttons, pop-lists, and other items on the toolbar as desired.
    5-Horizontal Toolbar
    Specifies that the canvas should be displayed as a horizontal toolbar at the left side of the window to which it is assigned.

  • Canvas view is pixelated

    I am learning FCE. When I bring in a video into the viewer, it looks good. I drag it into the time line and want to view it in the Canvas viewer and it is pixelated. What to I need to do to change that?
    Still pictures that I have imported look fine.

    2 years ago I bought this Mac and FCE with the intent on using it for video editing. I beat my head for a few months and bailed out and went back to the PC and Sony Vegas. I could no longer handle the fussyness of video not being in the "right format". At that time I was frustrated with the need for constant rendering whenever I edited a clip.
    I thought I could give this another try but this is reminding me why I left FCE. Thanks for trying to help me. I love the Mac but the video editing is not very user friendly.

  • Parent window not specified for canvas.View

    I am getting the following error in custom form which has developed based on a vennila form QPXPRLST.FMB.
    "Parent window not specified for canvas.View"
    for the following canvases
    1.FOLDER_SORT_DATA
    2.FOLDER_TOOLS
    3.SAVE
    and some more
    According Metalink, Apply a path : 1815485
    But would it support Custom form ??
    Pl give me solution if any body knows

    My Dear Friend,
    For all the canvases, you will have to define the Window property. Since you didn't define the window property for your Login_canvas, you r getting the problem. You must launch the properties window for the canvas and set the window property for the canvas, then you will not get the problem again.
    Regards,
    Senthil .A. Perumal.

  • PAL sequence shows strange markings in canvas viewer window

    I have a DV PAL clip in a DV PAL sequence. I have it rendered in the timeline and did a couple of simple edits. Even before I did the edits, I could not get the clip to display in the canvas viewer. I get some green dots here and there, the occasional green check mark and an occasional yellow exclamation mark in that window. What am I doing wrong?
    MikeR

    One of my little edits was fading in from black. In the process I blasted the video levels way up.

  • Large black borders arond Canvas View

    I have footage imported from a Canon XH-A1 at 720 x 480, when I drag it to the Canvas viewer it displays with large black borders around it and any exports look the same. Looks normal in Viewer. Also must be RENDERED to be viewable in Timeline, which did not used to be an issue - something has changed, but I am not sure what!
    Capture preset is DV NTSC 48KHZ, camera is not in HD or wide screen mode. Footage seems to look OK if I import it into iMovie HD, not my preferred editor due to the length of clips being edited.

    David Kuhnen wrote:
    Studio Xs answer is correct but let me rephrase it;
    No you may not. the TOU specifically prohibits rephrasing X.
    From the ForumTOU ...
    *How do I reply to a message?*
    Click Reply next to the message to which you'd like to reply. In the resulting page, type your message in the Message box.
    If you want to quote specific text from the original message, click Quote Original to add all the text from the original message to the Message box. You can edit that text if you want to quote only specific parts of the original message.
    If Studio X has posted a reply, you +*MAY NOT*+ rephrase the post.
    (bold and italics in the original.)
    lol.
    x

  • FCP 7 noob needs help - Unrendered in Canvas

    Hello
    I am totally new to FCP and my knowledge of video editing goes as far as iMovie.
    I have imported some .mov files into FCP.
    I drag into Viewer, mark it and then Drag it into the "insert" in the canvas.
    When i play back on timeline, the Canvas shows a blue screen with Unrendered" on it.
    I have no idea what t do...have searched forums and found a couple of the same but
    didnt quite get what was being discussed so any help from you experts would be great!
    Thanks.

    I have imported some .mov files into FCP.
    What format? And don't say ".mov" because that is only a container that can hold all sorts of CODECS. Select the file and hit CMD-I and see what the codec is.
    Now, that being said, FCP is a PROFESSIONAL editor, meant to work with professional level formats, and some consumer ones. For a full list of what formats are supported, look in the EASY SETUP list. Stuff you download from the web WILL NOT work. H.264, MPEG-4, MPEG-2, AVI...nada. Gotta convert.
    That being said...
    Shane's Stock Answer #28: When I put a clip in the timeline, I have to render it before it will play. Why?
    Your clip settings MUST match your timeline settings. If you have DV/NTSC material, you need a DV/NTSC timeline. The frame rate, audio rate and dimensions (4:3, 16:9) all need to match exactly. In Final Cut Pro 6, this is easy, because when you drop a clip into the timeline, it asks if you want to set up the timeline to match the settings of the first clip you drag into it. Click YES and you are ready to go.
    However, in FCP 5.1 and earlier, it is a bit trickier.
    The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu.
    Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence.
    This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured.
    Shane

  • Canvas/Viewer Zooming past 100% question?

    When I zoom the Canvas or Viewer past 100%, I think I should start to see actual pixels. By the time I get to 800%, I should be able to see the actual pixels, albeit very small. When I do this with Apple Intermediate or Apple ProRes MOV's, at like 800% I see what looks like VERY smoothed pixels. Is my output going to look like that? When I convert my input with a 3rd party codec such as CineformHD at the same resolution (I'm using 1920x1080 with all codecs), and when I zoom in, I start to see the pixel structure as I'm used to in Photoshop. I like it much better when I see the pixel structure.
    Is FCP actually smoothing the view with the Apple codecs because it thinks it looks better with a smoother view? (Though when I make a change in the video parameters, for a brief second, you actually see the pixels then it switches back to the smooth view.)
    I guess the question is, is that what its doing--smoothing? And the second is, can I make it so that the apparent "smoothing" doesn't happen? Thanks.

    Final Cut Pro's Canvas always shows a low-res proxy to conserve resources for real time playback.
    To truly assess your video quality, you need a calibrated external monitor.

  • Stupid question ?  How do I PROPERLY display 16:9 in the canvas/viewer

    Working in FCP6. All I want to do is capture 16:9 PAL DVCAM from a Sony DSR 450 (set, unsurprisingly, to 16:9!) I've been all over the manual and drop down menus, think I've got the settings correct, BUT the canvas and viewer show the 16:9 letterboxed in a 4:3 frame and the capture window shows incoming 16:9 video squeezed into 4:3 frame. this can't be right surely. Could someone take me through the right settings?
    In Avid (sorry for the bad language) you can simply select 16:9 monitors. I've found the windows/arrange/standard bit and was expecting to see a 16:9/4:3 option but it doesn't exist. Help ... Please.

    Hi. Thanks for the thoughts. I'v already been on this dialogue box, there isn't a straightforward 16:9 setting. I'm assumng that you aheck the anamrphic 16:9 box select pixel aspect ratio to PAL CCIR601 720x576 and frame size to CCIR 601 PAL (4:3) Can't imagine what the frame size seting CCIR^)! PAL(5:4) is for. I'm aware that there are no more pixels recorded in 16:9 on a native 16:9 chip so setting for PAL 4:3 and ticking the anamorphic 16:9 box should fo it, shouldn't it. If you select one of the (obviously) native 16:9 HD formats you still get a letterbox within the 4:3 shaped viewer/canvas windows. Maybe that's just how it is. Seems strange though.

  • Canvas viewing and safe areas

    Hello
    I have many video cips in a time line, when I am not playing I see the safe zones displayed, when I play, they go away. Is there a way to continue to see safe zones as I play in the canvas. I am not sure that it is even supported, but if it is, I am not finding the selection to turn on.
    thanks
    les

    A much easier workaround would be to create a guide in photoshop using the photoshop NTSC preset guides, import it into Final Cut and lay it in the top video track.
    If you dont use Photoshop, you can apply the viewfinder filter (Effects/Video Filters/Video/Viewfinder) to the black slug in your Viewer, then drag it to the timeline and modify the scale and the aspect ratio to match safe title/safe action guides, put it on the uppermost video track, select it and goto Modify/Composite Mode and choose Add. Just remember to hide it before you Export or put to tape.

  • Canvas view

    I've just captured a clip into FCP using my Sony Z1 and using the HDV to DV downconvert on the camera. When I play the clip in the viewer, it looks like I want it to. SD Letterboxed. When I put the clip into the canvas,
    it becomes quite a bit smaller. Aspect is correct, just a lot smaller. I know it's probably some setting, I just can't find it. Any clues? Thanks in advance...
    G5   Mac OS X (10.4.5)  
    G5   Mac OS X (10.4.5)  

    Make sure your sequence preset is what you want. It sounds like your sequence might be HD, making your SD clip appear rather small when cut in.

  • Canvas View Not Following External Video

    Hello, everyone. I've had this problem before, and somehow managed to figure out how to fix it, but I'm having it again, and - for the life of me - it's stumping the heck out of me and I haven't been able to figure out how to undo it.
    My external monitor is indeed playing the timeline sequence realtime, but the video on the Canvas is frozen. It only shows the frame I'm on when I stop playback.
    My caps lock button is NOT on (that's happened before and I undid it).
    View>External Video>All Frames
    Video Playback>Apple Firewire NTSC (720X480)
    Audio Playback>Firewire 410 [this is the audio device I use for playback]
    Show Multiclip Angles is UNchecked
    I'm stumped!
    It's always been a quick fix before - a button I accidentally pressed or unpressed - but I haven't figured it out this time.
    Any help would be greatly appreciated.
    Thank you very much,
    Javier Calderon

    Also, and by the way, this is a feature I've been working on for a few months now - so it's a problem that just arose on a project I've been sailing decently on for a while now. Additionally, it seems to be something I did to FCP itself - and not to the specific project sequence I'm working on, because I opened up two other sequences to see if they were working well . . . and those other sequences weren't either. The other sequences had the same issue - letting me, again, know that it's some issue with the overall FCP program settings perhaps as opposed to the specific project I'm on.

Maybe you are looking for

  • Site Web Analytics - no usage data being generated

    Hello all: I have a SharePoint Foundation 2013 farm with 2 WFE - 1 Search Server and 1 DB server.  Search Service Application has been configured and functioning properly.  Usage and health Data Service Application has been created and started.  Usag

  • Addressbook.data import from Tiger to Mountain Lion

    Hello. I have a backup of an addressbook.data file and other Contact related files that I am trying to import back into Contacts. The original files are from OS Tiger and I am wanting to import them into Contacts on OS Mountain Lion. I do not have a

  • TABLE CONTROL USED IN BDC

    MAY ANY ONE SUGGEST ME THE IDEA OF TABLE CONTROL USED IN BDC

  • Organizational structure from one plan variant to another

    Hello, We want to make a copy of an organizational structure from one plan variant to another. This copy should include all      assignments like purchasing groups to organizational units made in PFOM . Can we do this? Thanks

  • How to provide search pluggin to JDeveloper

    I am new to JDeveloper 10g. 1)This morning for the first time I downloaded the Jdeveloper 10.1.3, and installed it in my computer. 2)Then I also installed all the components available from 'Check for Updates' process. I am not even sure if I going to